Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

MODEL BQ

SUBSTRUCTURE

Timesing Dimension SQ Description


SITE CLEARANCE
42 Strip vegetable soil, average depth 150mm
43 85
EARTHWORKS
Excavate to reduce level
not exceeding 300m deep
m3 Girth: 275mm/1000= 0.275m
10.417+0.275+0.275= 10.967 x 2, 19.550+0.275+0.275= 20.100x 2,
87.234 10.450+0.275+0.275= 11.00 x 2, 1.000+0.275+0.275=1.550 x 2,
0.90 42.450+0.275+0.275= 43.000, 2.500+0.275+0.275=2.550 x 4,
0.55 43.18 12.450+0.275+0.275=13.00 x2, 17.550+0.275+0.275= 18.100
21.934+ 40.200+ 22.000+ 3.1= 87.234
97.3 43.00+ 10.20+ 26.00+ 18.1 = 97.3
0.90
0.55 48.16
91.34 m3

0.3 91.344 27.403 m3 Extra over for rock

1 87.434 Backfill to foundation trench


0.2
0.675 11.803

1 88.134
0.2
0.675 11.9

1 97.5
0.2
0.675 13.163

1 98.2
0.2
0.675 13.26
50.126 91.344- 50.126= 41.218

41.218 41.218 Load up and cart away to an approved dump site


1 1 1 Allow for keeping all excavation free from surface or perculating water
m2 150mm thick imported marl fill compacted in 300mm thick layers to make up level under floor
L= 41.412+0.400= 41.817
W= 74.95+ 0.400= 75.35

1 41.817 m2 150mm thick imported marl fill compacted in 300mm thick layers to make up level under floor
75.35 3150.91 Treat sides and bottom of foundation excavation with an approved antitermite chemical to carried out by an
approved pest controller to the satisfaction of the architect and obtain a 5 year warranty from the pest controller
87.234 eight of foundation 0.900 twice and width of foundation 0.550=2.350
2.35 205

97.3
2.35 228.7
433.7 m2

1 3150.91 3150.91 Treat surface of fill uder floor (ditto)


abc= 3150.91

1 42 42.117 Treat surface of ground along perimeter of


2 76.65 76.65 building not exceeding 1.5m wide (ditto)
118.767 41.417+0.350+0.350= 41.817, 74.950+0.350+0.350= 75.65

1 87.234 Reinforced concrete 25N/mm2 as described


0.55 Wall foundation
0.225 10.8 a.b.c = 5.05
a.b.c = 5.95
1 97.3
0.55
0.225 12.04
22.84 m3

Stiffeners
14 0.45 300-150=150 /300 length and 150 half the length=450mm to 0.450 m L900-225D=675
0.15
0.675 0.5 m3
0.64

3150.91 100mm thick floor slab


11 3150.91 m2 a.b.c =3150.91
14 0.9 Formwork and support as described to vetical sides of stiffeners
0.675 0.61
8.54

Reinforcement
Mild steel reinforcement and fixing as
described
2
3 42.467 254.802 13mm diameter bass in wall foundation
41.417+0.550+0.550-0.050= 42.467

74.950+0.550+0.50= 76.00
2
3 76 456
710.802 m
710.80x 3.2808x 0.668/2.2= 708 kg
9mm diameter bars as link in wall foundation
143 0.575 82.225 500 + 25 + 12.5 + 25 + 12.5 = 575mm to 0.575m
42.467/ 0.3=141.56= 142+ 1 = 143
76/0.3= 253.33= 254+ 1= 255
255 0.575 129.375
211.6 m
211.60x 3.2808x 0.668/ 2.2= 210.80 to 211+1 = 212kg
4
6 0.913 21.92 13mm diameter bars as link in stiffeners
fig dim=900
less cover -025
875
0.875 + 0.0125 + 0.025 = 0.913

2
4
5 0.8 32 9mm diameter bars as stirrup in stiffeners
fig dim:2/0.300=0.600 and 2/0.150=0.300 =0.900
less cover 2 covers and 4 stiffeners=8 and the spacing 0.20 ,8/0.025
0.200/0.700 space , add extra 2/0.05 0.100/0.800
0.675/0.20=3.375=4+1=5 NO
32.00*3.2808*0.367/2.2=17.513
18
3150.91 TRC fabric reinforcement no 12.6 load in floor slab with 150mm side and end (measured with no allowance made for laps)
1.00 3150.91 with 150mm side and end laps.
a.b.c = 3150.91

Blockwall
41.117 150mm thick class A hollow core concrete
0.675 27.75 blockwall laid in cement and sand (1.3) mortar
all cavities filled with concrete and build
around reinforcement

74.65 50.4 fig dim 41.417- less stiffener 0.30 = 41.117


0.675 78.15 fig dim 74.95 - less stiffener 0.30 =74.65

13 mm diameter bars fixed vertically in cavaties of blockwall fig dim=0.900 less cover =0.025
94 1.05 98.7
41.177x2= 82.23, 74.65x2 = 149.3, 231.53x 0.4= 92.61= 93+ 1 = 94 NO
98.7x 3.28080.668/2.2= 98.32 kg

2 231.53 463.06 13mm diameter bars fixed horizontally in cavaties of blockwall


a.b.c 231.53
0.675/0,6= 1.12= 2 NO, 463.06x 3.2808x 0.668/ 2.2= 461.28= 462 kg

You might also like