Professional Documents
Culture Documents
Keihin 38770-mxx-dxx Honda
Keihin 38770-mxx-dxx Honda
https://ecu.design
KEIHIN 38770-MXX-Axx_Dxx HONDA
1.2 CONNECTIONS
ATTENTION
After making all the connections, connect a stabilized power supply to the New Trasdata and make sure
that the POWER LED (red) is on.
To communicate correctly with the control unit, it is necessary to use the F32GN037C/D and F34NTF53 cables.
https://ecu.design
KEIHIN 38770-MXX-Axx_Dxx HONDA
To get access to the communication pads you must remove part of the silicon that covers the ECU board.
After properly removing the silicon please check that the vehicle starts fine and that there are no fault codes or
warning lights on the dashboard.
20 BLACK
21 BROWN
https://ecu.design
KEIHIN 38770-MXX-Axx_Dxx HONDA
Connect the BOOT and CNF1 pins to the grey and blue wires of the cable F32GN037C/D .
https://ecu.design