Professional Documents
Culture Documents
DMC Annual 1 Set B
DMC Annual 1 Set B
DMC Annual 1 Set B
ANNUAL - 1
TRADE – DRAUGHTSMAN CIVIL
Subject – Trade Theory
Time: 2 hrs Marks: 100
3. In Plane tabling, the instrument used to measure horizontal and vertical distances directly is called __________.
(a) Plain Alidade (b) Telescopic Alidade (c) Tachometer (d) Clinometer
4. The method of plane tabling commonly used for establishing the instrumentations only is a ______________.
(a) method of radiation (b) method of intersection (c) method of traversing (d) method of resection
6. Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds _____________.
(a) 2% (b) 3% (c) 4% (d) 5%
9. The Specific gravity of stone should not be in any case be less than ___________________,
(a) 1 (b) 1.5 (c) 2 (d) 2.5
14. According to Indian standard specification the full strength of concrete is achieved after_________________.
(a) 7 days (b) 14 days (c) 21 days (d) 28 days
19. Which type of paint is applied for iron work under water?
(a) Asbestos paint (b) Cellulose paint (c) Aluminium paint (d) Bituminous paint
21. What is the process of removing moisture present in freshly felled timber?
(a) Hardening (b) Stiffing (c) Sapping (d) Seasoning
23. What is the defect in formation of bubbles on painted surface due to water vapour?
(a) Fading (b) Bloom (c) Blistering (d) Flashing
24. Which plaster material is used for making the room sound proof?
(a) Barium (b) Asbestos cement (c) Acoustic (d) Granite silicon
27. What is the process of surface smoothened by rubbing with sand paper or pumice stone for varnishing?
(a) Application of surface (b) Preparation of surface (c) Cleaning of surface (d) Finishing of surface
30. What is the work carried to fix national and state boundaries?
(a) Contouring (b) Levelling (c) Topographic mapping (d) Surveying
31. What is the term that is normal to plumb line at all points?
(a) Level surface (b) Datum surface (c) Horizontal surface (d) Vertical surface
SCVT TRADE TEST – 2023 SET-B
ANNUAL - 1
TRADE – DRAUGHTSMAN CIVIL
Subject – Trade Theory
Time: 2 hrs Marks: 100
34. What is name of the level which does not required any protection from the sun?
(a) Auto level (b) Tilting level (c) Dumpy level (d) Wye (y) level
36. Which branch of surveying deals with the measurements in vertical plane?
(a) Chaining (b) Levelling (c) Compassing (d) Plane tabling
37. What is the name of the imaginary line of constant elevation on the ground surface?
(a) Relief (b) Contour line (c) Contouring line (d) Contour interval
40. What is called if a force of 1Newton acts on a body and moves it through a distance of 1 metre?
(a) 1 Joule (b) 10 Joules (c) 1 dyne (d) 10 dynes
42. What is known for the temperature at which any solid melts into liquid?
(a) Boiling point (b) Melting point (c) Latent heat of fusion (d) Latent heat of vaporisation
43. What is the total resistance if three resistances of 3 ohms, 9 ohms and 5 ohms are connected in series?
(a) 11 ohms (b) 7 ohm (c) 17 ohms (d) 1/17 ohms
47. What is the projection if the receding lines are drawn to ½ scale?
(a) Cavalier projection (b) Cabinet projection (c) Clirographic projection (d) Axonometric projection
49. What is the maximum degree that can be measure in circular protractor?
(a) 360 Degree (b) 270 Degree (c) 180 Degree (d) 390 Degree