Professional Documents
Culture Documents
Week 7
Week 7
Process:
First when pallet comes in front of sensor then the process will
start but here it is using start stop button in place of sensor,
then the cylinder A and cylinder B were extend for holding the
pallet and then cylinder C extend for holding the lock and then
the flipper slide extend after some time and attach the motor
for rotating the part 90 degree for scanning and also the
cylinder C retracts, after scanning the cylinder D, A, B also
retracts. And pallet move on.
Here its screen shot of the process with connection and also
attach it with HMI screen, two buttons for forward and reverse
and one stop button.
Three phase motor connect with line voltage.
Simulation link:
https://drive.google.com/drive/folders/1H94OfcnyJRo84MtuXh
zgI_a0UhLL5JfP?usp=sharing
Plan for next week :
Thank you