Professional Documents
Culture Documents
Deghe 11
Deghe 11
ON
“Mini Project”
Department of
Mechanical Engineering
2023-2024
“Mini Project”
Submitted By:
This is to certify that the project report entitled, for the partial fulfillment of the requirements of
the course “Mini Project” (ME222) at SY B.Tech (Mechanical Engineering) embodies the
work done by them under our guidance and supervision in the second semester of academic year
2023-2024.
Prof. S.V.Fartale
Faculty in charge Mini Project
coordinator
We declare that this written submission represents our ideas in our own words; we have
adequately cited and referenced the original sources. We also declare that we have adhered to all
principles of academic honesty and integrity and have not misrepresented or fabricated any
source in our submission. We are also declared that this project report represents our joint and
individual efforts. All components of this report, encompassing text, figures, tables, and other
original elements, are the outcome of collaborative work, unless explicitly acknowledged
through proper citations. The data and information utilized in this project have been sourced
from reputable references, duly cited in the bibliography. We understand that any violation of the
above may cause disciplinary action by the Institute and can also evoke penal action from the
sources which have not been properly cited.
Place:- Kopargaon
Date:- / /2023
Members Names -
ACKNOWLEDGEMENTS
As we present this project on IOT based, we would like to extend our sincere gratitude to
everyone who contributed to the successful completion of this collaborative effort.
First and foremost, we express our deepest appreciation to Prof.S.V.Fartale, our project
supervisor, for providing invaluable guidance, continuous support, and expert insights
throughout the research process. Your mentor ship has been instrumental in steering our group
towards a comprehensive understanding of the subject matter.
We extend our thanks to the faculty and staff at Sanjivani Collage of Engineering for fostering an
academic environment that promotes teamwork, exploration, and academic excellence. The
resources and facilities provided were crucial in facilitating the various aspects of our project.
We also express our gratitude to our friends and family for their unwavering support during the
duration of this project. Their encouragement and understanding were essential in navigating the
challenges and demands of a group endeavor.
Finally, we acknowledge the numerous authors, researchers, and educators whose work served as
the foundation for the theoretical framework of our project.
This project stands as a testament to the collaborative efforts of everyone involved. Thank you
for being integral parts of this collective journey.
Topic: :-Alcohol Detection And Engine Locking System Using Arduino Uno And Sensors.
Problem Statement -
Designing and prototyping a robust alcohol detection system using Arduino Uno
microcontrollers and appropriate sensor modules
Objective -
The Alcohol Detection with Engine Locking system helps to reduce accidents which are
occurring due to drunk driving.
The Chance of Loss of Life and Property due to Drunken driving Minimized. Less
Accidents, more safety.
Scope -
As the growing public perception is that vehicle safety is more important, advances in
public safety is gaining acceptance than in the past.
Future scope of this system is to control the accidents causes due to alcohol consumption.
This system improves the safety of human being.
Material Required –
Buzzer
Arduino UNO
Buzzer :
Specification :
Rated Voltage : 6V DC
Operating Voltage : 4 to 8V DC
Tone : Continuous
Weight : 2g
MQ3 Gas Sensor :
Specification :
Supply Voltage: 5V
Detecting Concentration:0.05-10mg/L
Alcohol Analog and Digital Output Digital Out is High or Low based on a
adjustable preset threshold
LCD Display 16x12
Weight: 25 g.
• When a drunk person breathes near the alcohol sensor it detects the ethanol
in his breathe and provides an output based on alcohol concentration
• The MQ3 alcohol sensor can detect alcohol concentrations ranging from 25
to 500 ppm. The sensor's analog output voltage (at the A0 pin) varies in
proportion to the alcohol concentration
• the alcohol sensor is used to monitor driver breath and constantly sends
signals to the microcontroller.
• The microcontroller on encountering high alcohol signal from the alcohol
sensor displays alcohol detection on LCD screen and also stops
the motor engine.
• MQ3 is a sensor which we have used for detection of alcohol. Now sensor
detect the presence of alcohol it passes signal to the main micro-controller
i.e., Arduino UNO board.
• The micro- controller sends these signals to buzzer and transistor and further
these signals are relayed to DC motor i.e., Engine through relay.
Conclusion :
References :