Professional Documents
Culture Documents
GTI New ARM Inside User Manual v1.2
GTI New ARM Inside User Manual v1.2
GTI New ARM Inside User Manual v1.2
MCU: cxc125954_china_cl.mcu
DEC: fs_chinese_cl.dec
MCU: cxc125955_hong_kong_cl.mcu
DEC: fs_hong_kong_cl.dec
MCU: cxc125956_taiwan_cl.mcu
DEC: fs_taiwan_cl.dec
R1J002 firmware
version
prg CXC 125821 1_EU_1_C
LCD SW versions
Main display
Current: 200406041
Camera SW versions
Camera
Current: 3.9
ITP SW version
CXC 125 813 R1T
Customization
cxc 125822 R1J002
EMEA_1 phone customization
\K750\R1J002\MCU\DEL_125952MR1_R1J002EU1.mcu
\K750\R1J002\PPM\DEL_125953EMEA1MR1_R1J002.ppm
Please note:
To able decustomize and change language on K300 CID24 and K750 CID 24
MCU name start with CXC and language DEC file start with FS
If you use MCU which name start with DEL (these files are only for software upgrade),
after flash you will have only Automatic and English language
Unlock
Unlock phone by codes > press "Generate codes" button and wait to software finish,
power on the phone and type <**<, enter the codes
Direct unlock > press "Unlock" button, when software say unlocked, disconnect phone
How to decustomize and change language
K300\R2AT003\CID 24\Decustomize\cxc125978_EU1CID_24.mcu
Click to select DEC file (depend which languages you want to upload) then point to for
example :
K300\R2AT003\CID 24\Decustomize\fs_emea_2.dec
Power on the phone and "Please wait" , power of the phone and insert sim card
If you want to upload Chinese languages please use these two files:
Please note:
To decustomize phones and change language do not use other MCU files unless:
cxc125978_EU1CID_24.mcu
cxc125985_chinaCID_24.mcu
How to upgrade phone software
R2L001 firmware
version
prg CXC 125821 1_EU_1_C
LCD SW versions
Main display
Current: 200406041
Camera SW versions
Camera
Current: 3.9
ITP SW version
CXC 125 813 R1T
Customization
cxc 125822 R2L001
EMEA_2 phone customization
K300\R2AT003\CID 24\MCU\DEL_125978EU1_1253_R2AT003.mcu
K300\R2AT003\CID 24\PPM\DEL_125822FSEMEA2_1144_R2AT003.ppm
PHONE WONT TO FLASH OR GIVE YOU ERROR WHILE FLASHING
PROCESS
K300\R2AT003\CID 24\Recovery\Recovery_DB2010_Cert_RED_cid24.rep
Please note:
To able decustomize and change language on K300 CID24 and K750 CID 24
MCU name start with CXC and language DEC file start with FS
If you use MCU which name start with DEL (these files are only for software upgrade),
after flash you will have only Automatic and English language
The best way is to solder wire to TP resistor and other wire side makes ready to connect
to GND.
Why solder wire to resistor? To be sure it is good connected.
On some PCB you will find glue storage over TP resistor, and then need to scratch it.
Remove Test Point (when software ask you "Remove Test Point?")
Click YES
Disconnect phone