Wash and dry hands Remove pen cap Wipe rubber stopper with an alcohol swab Remove protective tab of a single-use needle and screw the needle onto the pen Remove the outer and inner needle shields Prime the pen by turning the dose dial to 2 units, holding the pen upright and pushing the button until a drop of insulin appears Turn the dial to the number of units to be injected Clean injection site with alcohol swab Pinch clean skin at injection site Push the pen needle into the skin Release pinched skin Press the pen button all the way in Keep button pressed while counting for 6 seconds Withdraw the needle from the skin while keeping the button fully pressed Dispose needle into a sharps container or another container that is not easily punctured (e.g. laundry detergent container)