Professional Documents
Culture Documents
Matrix 320 2MP Liquid Lens Quick Reference Guide (ENG)
Matrix 320 2MP Liquid Lens Quick Reference Guide (ENG)
COM (yellow) indicates active communication on main serial port. Bump resistance 30 g; 6 ms;
LED Safety according to EN 62471
EN 60068-2-29 5000 shocks on each axis Disconnect the power supply when opening the device during maintenance or installation to
STATUS (red) indicates NO READ result. Lenses Liquid Lenses avoid exposure to hazardous laser light. The laser beam can be switched on or off through
Shock resistance 30 g; 11 ms;
EN 60068-2-27 3 shocks on each axis
Lighting System Internal illuminator a software command.
During the reader startup (reset or restart phase), all the LEDs (14 or 36 LEDs) The following warning label content is applied to each of the laser equipped products indica-
blink for one second. Protection class 3
IP65 and IP67 ted on the opposite page.
EN 60529 Illuminator Color Liquid Lens 6 mm: Blue and Red light
Liquid Lens 9 mm and 16 mm: Blue, Red, and White light
Physical Features Aperture Angle Liquid Lens 6 mm: 48°
Matrix 320 with Matrix 320 with Liquid Lens 9 mm: 34°
14 LEDs illuminator 36 LEDs illuminator Liquid Lens 16 mm: 20°
Dimensions HxWxL HxWxL Reading Range Liquid Lens 6 mm: 50 - 550 mm
(with lens cover, con- 108.7 x 54 x 55.5 mm 115.5 x 126 x 70.3 mm Liquid Lens 9 mm: 35 - 1000 mm
nectors at 0°) (4.3 x 2.1 x 2.2 in) (4.6 x 4.9 x 2.8 in) Liquid Lens 16 mm: 70 - 1500 mm
HMI X-PRESS™ Produit(s) conforme selon 21CFR 1040.10 sauf des dérogations relatives à la Laser Notice N°
Weight Aiming System Laser cross red projection aiming 56, data Mai 8, 2019.
The single push button gives immediate access to the following (with lens and 380 g (13.4 oz) 640 g (22.6 oz) Dans le paquet il y a l’étiquette(s) pour les pays où le texte d’avertissement en français est
Polarizing Filter Polarizing cover accessory
relevant functions: internal illuminator) obligatoire. Le(s) mettre sur le produit à la place de la version anglaise.
• Test Mode with bar graph visualization to check static reading User Interface
Material Aluminum
performance. LED indicators Power, Ready, Good; Trigger; Com, Sta-
• Aim/Autofocus turns on the laser LED to aim the reader at the Software Features tus, (Ethernet Network); Good Read
target. The target should be placed 16 mm (14 LEDs model) Readable Code Symbologies (Green Spot)
or 30 mm (36 LEDs model) upwards and centered horizontally
1D and Stacked 2D Postal Keypad button Configurable via DL.CODE
with respect to the aiming pattern (cross).
• PDF417 Standard and • Data Matrix ECC 200 • Australia Post
• Setup to self-optimize and auto-configure photometry para-
Micro PDF417 (Standard, GS1 and • Royal Mail 4 State
meters.
• Code 128 (GS1-128) Direct Marking) Customer
• Learn to self-detect and auto-configure for reading an unk-
• Code 39 (Standard and • QR Code (Standard and • Kix Code
nown barcode (by type and length). Only one symbology
Full ASCII) Direct Marking) • Japan Post
can be saved using this method. Performing Autolearn on a COMPLIANCE WARRANTY
• Code 32 • Micro QR Code • PLANET
second symbology will overwrite the first one.
• MSI • MAXICODE • POSTNET Datalogic warrants that the Products shall be free from defects in materials and workmanship under
General
• Standard 2 of 5 • Aztec Code • POSTNET (+BB)
TECHNICAL SPECIFICATIONS
normal and proper use during the Warranty Period. Products are sold on the basis of specifications
• Codabar • DotCode • Intelligent Mail For installation, use and maintenance it is not necessary to open the reader. Only connect applicable at the time of manufacture and Datalogic has no obligation to modify or update Products
• Code 93 • Swedish Post Ethernet and dataport connections to a network which has routing only within the plant or once sold. The Warranty Period shall be two years from the date of shipment by Datalogic, unless
Electrical Features • Pharmacode building and no routing outside the plant or building. otherwise agreed in an applicable writing by Datalogic.
Power • EAN-8/13 - UPC-A/E Power Supply Datalogic will not be liable under the warranty if the Product has been exposed or subjected to any:
(including Addon 2 and (1) maintenance, repair, installation, handling, packaging, transportation, storage, operation or use
Supply Voltage 24 Vdc ± 10% ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
Addon 5) that is improper or otherwise not in compliance with Datalogic’s instruction; (2) Product alteration,
Peak Supply Current 1 A max. The unit is intended to be powered by an external power supply ES1, PS2 according to IEC
• GS1 DataBar Family modification or repair by anyone other than Datalogic or those specifically authorized by Datalogic;
Matrix 320 14 LEDs: 0.42 A 62368-1:2014.
Average Supply Current • Composite Symbologies (3) accident, contamination, foreign object damage, abuse, neglect or negligence after shipment to
Matrix 320 36 LEDs: 0.62 A EMC Compliance Buyer; (4) damage caused by failure of a Datalogic-supplied product not under warranty or by any
Operating Mode Continuous, One Shot, Phase Mode, PackTrack
Communication interfaces In order to meet the EMC requirements:
hardware or software not supplied by Datalogic; (5)any device on which the warranty void seal has
Configuration X-PRESS Human Machine Interface.
been altered, tampered with, or is missing; (6) any defect or damage caused by natural or man-made
Main: RS232, RS422 Full-Duplex 2400 to 115200 bit/s Methods Windows-based DL.CODE (Ethernet / Serial interface). • connect reader chassis to the plant earth ground by means of a flat copper braid shorter
disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism
Auxiliary: RS232 2400 to 115200 bit/s Serial Host Mode Programming sequences. than 100 mm;
or abusive events that would cause internal and external component damage or destruction of the
• for CBX connections, connect pin "Earth" to a good Earth Ground;
ID-NET Parameter Storage Permanent memory (Flash) whole unit, consumable items; (7) use of counterfeit or replacement parts that are neither manu-
• for direct connections, connect your cable shield to the locking ring nut of the connector.
Ethernet (Built-in) 10/100/1000 Mbit/s Code Quality Metrics factured nor approved by Datalogic for use in Datalogic-manufactured Products; (8) any damage
supported application protocols TCP/IP, UDP, FTP, EtherNet/IP, CE Compliance or malfunctioning caused by non-restoring action as for example firmware or software upgrades,
Standard Supported Symbologies
Modbus TCP, PROFINET-IO CE marking states the compliance of the product with essential requirements listed in the software or hardware reconfigurations etc.; (9) loss of data; (10) any consumable or equivalent (e.g.
ISO/IEC 16022 (always enabled) Data Matrix ECC 200 applicable European directive. Since the directives and applicable standards are subject to cables, power supply, batteries, etc.); or (11) any device on which the serial number is missing or
Inputs
Input 1 (External Trigger) and Opto-coupled and polarity insensitive ISO/IEC 18004 (always enabled) QR Code continuous updates, and since Datalogic promptly adopts these updates, therefore the EU not recognizable.
AIM DPM Data Matrix ECC 200, QR Code declaration of conformity is a living document. The EU declaration of conformity is available THE DATALOGIC WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
Input 2
for competent authorities and customers through Datalogic commercial reference contacts. WHETHER WRITTEN, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT
Max. Voltage 30 Vdc ISO/IEC 15416 Code 128, Code 39, Interleaved 2 of 5,
Since April 20th, 2016 the main European directives applicable to Datalogic products require LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
Max. Input Current 10 mA Codabar, Code 93, EAN-8-13, UPC-A/E
inclusion of an adequate analysis and assessment of the risk(s). This evaluation was carried PURPOSE. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY BUYER ARISING
Outputs 1 out in relation to the applicable points of the standards listed in the Declaration of Confor- FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY
Output 1, 2 and 3 NPN, PNP, or PP short circuit protected mity. Datalogic products are mainly designed for integration purposes into more complex SET FORTH IN THE WARRANTY STATEMENT IS THE BUYER’S SOLE AND EXCLUSIVE REMEDY FOR
systems. For this reason it is under the responsibility of the system integrator to do a new WARRANTY CLAIMS. NO EXTENSION OF THIS WARRANTY WILL BE BINDING UPON DATALOGIC
VOUT (ILOAD = 0 mA) max. 24 Vdc
risk assessment regarding the final installation. UNLESS SET FORTH IN WRITING AND SIGNED BY DATALOGIC’S AUTHORIZED REPRESENTATIVE.
VOUT (ILOAD = 100 mA) max. 3 Vdc
Warning: this is a Class A product. In a domestic environment this product may cause radio DATALOGIC’S LIABILITY FOR DAMAGES ON ACCOUNT OF A CLAIMED DEFECT IN ANY PRODUCT
ILOAD max. 100mA interference in which case the user may be required to take adequate measures. DELIVERED BY DATALOGIC SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT
ON WHICH THE CLAIM IS BASED. DATALOGIC SHALL NOT BE LIABLE FOR DAMAGES RELATING TO
1 When connected to the CBX connection boxes, the electrical features for Output 1 2 High ambient temperature applications should use metal mounting brackets and LED Safety ANY INSTRUMENT, EQUIPMENT, OR APPARATUS WITH WHICH THE PRODUCT SOLD UNDER THIS
and 2 become the following: the heat sink provided in the package for heat dissipation.
For all Datalogic Matrix 320 compatible internal illuminators, LED emission is classified into AGREEMENT IS USED. Further details on warranty coverage, rights and conditions are addressed
Opto-coupled, VCE = 30 Vdc max.; ICE = 40 mA continuous max.; 130 mA pulsed max.;
Risk Group 1 according to EN 62471:2010. under and regulated by the Terms and Conditions of Sales of Datalogic available at https://www.
VCE saturation = 1 Vdc max. @ 10 mA; PD = 90 mW max. @ 50 °C ambient temperature. 3 When correctly connected to IP67 cables with seals and the Lens Cover is correctly
mounted. datalogic.com/terms_conditions_sales.