Professional Documents
Culture Documents
40T Flushby Unit2024.3.26
40T Flushby Unit2024.3.26
Main drum
Input rotary speed:500r/min
Max. fastline pull 140kN
Barke model: Disc brake
Dia. of rope φ22mm
Crown-block anti-collision type: mechanical +
9 Draw works JC14 Set 1
electronic anti-collision
Wind cooling
Clutch:ATD224H
Drive chain24S-2×108 p=38.1
Inc. Drawworks frame, Clutch,covers and brake
system.
Front support
10 Set 1
frame
Rear support Inc. Mast installation seat, shaft pin and mast
11 Set 1
frame support etc.
Front open, dual sections telecoping mast,
anchorless design.
Max. static hook load:900kN
Height: 18m from bottom crown to ground
12 Mast JJ7018 Set 1
Anti Wind capacity:110km/h full setback No hook
load.
Y frame and rail for working platform
API Spec 4F, PSL1,SSL E2/U2.
Climbing assitant ZLQ-00 Set 1
Escaper TS20 Set 1
Sheaves for main and spare tongs 2 sets Ea 2
Mast ladder Set 1
Accessories of
12.1 Connection base for Y frame, moving with carrier. Set 1
mast
Loadlineφ16mm L=24m with clips 6 Jts 2
Guylineφ16mm L=30m with clips 6 Jts 2
Adjustable supports Set 2
Turnbuckle for guyline Set 2
Max. static hook load:700kN
13 Crown block TC70(4*3) 4 sheaves, Dia.φ610mm Set 1
Forφ22mm Dia. Drilling line
Max Static hook load:700kN
15 Travelling block YG70 Set 1
Outside Dia. Of sheaves and number,φ610mm×3
Working pressure 14Mpa with 1 set of PTO. Main
hydraulic pump and Motor driven hydraulic pump
16 Hydraulic system Set 1
installed on the transmission, with valves and
pipings.
16.1 Raising cylinder Y(3)59/370 Working pressure:14MPa Set 1
Telescoping
16.2 JJ seriers Single telescoping ass. Set 1
cylidner
Rated load:150kN,
16.3 Hydraulic jack Y1530 Set 4
Stroke:300mm
Horizontal
16.4 cylinder of rear Horizontal telescoping Set 2
beam
Cylinder for Y
16.5 Set 2
frame
Max. lifting capacity:30kN
16.6 Hydraulic winch YJ3B Lifting wireline:80m/φ13mm Set 1
With chains, hook and Shield.
Max. lifting capacity:1.5kN
16.7 Hydaulic winch YJ1.5B Lifting wireline:60m/φ12mm Set 1
With chains, hook and Shield.
Working pressure:0.8MPa
Including a full set of pneumatic control valves and
connecting pipelines. Equipped with a stainless
steel gas control box, installed in the driller's
position, the control valves including the main
17 Pneumatic system drum control and throttle, emergency shutdown, Set 1
reset, shift, flushing pump throttle is installed on
the driller's control box. FESTO products are used
for gas pipeline, joint and main control valve.
The pipeline is equipped with dryer, purfying
devices, alcohol anticoagulant tank, etc.
Carrier 24V DC
3ea for mast, 1 for DW installed under the mast.
19 Lighting system Lighting Set 1
Explosion-proof floodligh
110V/60HZ
I ea Flashing red obstacle light
Ex-distribution Integrate the controls of motors and lighting,
20 Set 1
box installed on the chasis.
II Accessories
1 Elevator link SH75 Rated load:750kN Set 1
Electronic weight indicator
2 Weight indicator Set 1
Rated load:750kn
3 Knuckle Crane Max lifing:1.5t Set 1
3 EUE X 3000PSI
3 EUE Top Female,bottom male
Manual with 1-1/4" ram assembly
Set 1
Temperature Class: Metal T-20/250, nonmetal
BGB c/wRam Assembly 1“ NPT x 3000PSI
Hydrualic Hose with Union. 10m/pc,Rubbers HBR
4 Suck road BOPs FK125-2
3-11 gallon ASME ,
1-Electrically pump
BOP control 3 Rubbers Set 1
1-Manual pump
near drillers side
with Single-storey protected room
Protector for
5 For Y(3)45/345 cylinder Set 1
raising cylinder
6 Base ZZ400 Used for supporting the unit while operating. Set 4
7 Fire Extinguisher 8kg with bracket Set 2
8 Docs English/Chinese Set 1
Note:
1.Validity:30 dyas
2.Delivery:90 days after the contract comes into force by receiving 30% down payment
3.Payment:30% of the contract value shall be paid after the signature of contract, the rest 70% of the contract value shall be paid after the inspection and acceptance at the
factory, and before the delivery of the goods.
4.The warranty period of the main unit (used in the right way and normal maintenance) will be 18 months after the commodity leaves the factory or 12 months after the using
of the commodity by the buyer, based on which ever comes first. Warranty does not cover wearing parts.
Mar 26th,2024
Tianjin Haihe Petro Machinery Co.,Ltd.