Professional Documents
Culture Documents
Computer Organization and Architecture
Computer Organization and Architecture
The signal sent to the device from the processor to the device after 1/1
receiving an interrupt is
Interrupt-Acknowledge
Return Signal
Service Signal
Permission Signal
What characteristic of RAM memory makes it not suitable for permanent 1/1
storage?
too slow
unreliable
it is volatile
too bulky
In a microprocessor, the address of the next instruction to be executed is 1/1
stored in ___________
Stack Pointer
Address Latch
Program Counter
Device Interface
DMA Controller
Data Controller
Overlooker
When dealing with multiple device interrupts, which mechanism is easy to 0/1
implement
Polling Method
Vectored Interrupts
Interrupt Nesting
Correct answer
Polling Method
Binary addition of 1+1 gives the result______________ 0/1
10
IR
PC
Registers
MDR
The set of all the tracks in the same relative position on the platter is 1/1
referred to as a________
Platter
Tracks
Cylinder
None of them
The idea of cache memory is based 0/1
Correct answer
Write Through technique is used in which memory for updating the data 1/1
Virtual memory
Main Memory
Auxiliary memory
Cache Memory
DMA stands for 1/1
None of these
When using Branching ,the usual sequencing of the PC is altered. A new 1/1
instruction is loaded which is called as
Branch Target
Loop Target
Forward Target
Jump Instruction
The memory unit that communicates directly with the CPU is called the 1/1
Main Memory
Secondary Memory
Auxillary Memory
Shared Memory
MFC stands for 1/1
Quilgo Test ID *
This question is filled automatically ✋ DO NOT EDIT OR REMOVE
4JK22EC056
Micro-Programmed
Hardwired
Micro-Instruction
System heap
Processor Register
Processor Stack
Memory
None
0001
1001
1110
Correct answer
1110
The Method which offers higher speeds of I/O transfers is____________ 0/1
Interrupts
Memory Mapping
DMA
Correct answer
DMA
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Forms