Professional Documents
Culture Documents
Electric Mortice Locks Catalogue
Electric Mortice Locks Catalogue
Electric Mortice Locks Catalogue
Strikes
Contents
1
3570 Series Electric Mortice Lock
General Information
Designed and manufactured in Australia,
the 3570 series electric mortice is a high
performance lock of superior quality. It is
constructed from high grade zinc alloy, with a
stainless steel latch bolt and face plate and is
suited for all commercial applications.
Key Features
Designed with flexibility in mind, the one lock
can cover all functions and is easily configured
on site for the required application.
Monitoring features:
• Dead latched and Locked
• Door position/Reed switch
• Dual key override monitoring
• Request to exit/REX
• LED indication
C-Tick Certified
2 assaabloy.com.au
3570 Series Electric Mortice Lock
A 37
26 14
A 37 124
28.5 26 64 14 175
24
57 68 39
68 39 18
30 Reed Magnet
28.5 124
64 175
4 B 25
57
15
70
15 19 54 1.5
30
70
28.5
4 B 25 46
54 1.5 32
18
15
Note: width of case increases
28.5 38
from 19mm46 to 23 mm for
15 19
3579 series
32 SCEC lock
Dimension Backset
38
A 18
60 89 127
Specification Statement
3570 Technical Information
The lock should be capable of operation on voltages
Voltage 12Vdc - 24Vdc Operating Voltage between 12 – 24Vdc and have a current consumption
Current 500mA (max) 80mA holding @ 12Vdc not more than 80mA (holding) @12Vdc and 50mA
275mA (max) 50mA holding @ 24Vdc (holding) @24Vdc. Monitored locks must be capable
LED Current When LED’s are fitted, add 15mA (max) to total current draw
of monitoring the following functions: Key override,
door position / reed switch, selectable hub / Request to
Monitoring Dual Key override
Deadlatched
exit, & locking bar status. All monitoring outputs must
Locked have the ability to be wired independently. All settings
Door closed – including: fail safe / fail secure, handing, hub selection
Request to exit
Microswitches: 500mA (max) @ 30Vdc each circuit.
must be field configurable.
Reedswitch: 100mA (max) @ 30Vdc
Environment Operational temperature range -20c to + 60c
Cabling 1.6 metre length of cable with 12 pin socket supplied with each lock.
Recommended cable: 18AWG (0.82mm²) cable runs up to 30m.
3
3570 Series Electric Mortice Lock
Ordering Procedure
Sample Part Number 3572ELAM2RSC is made up of several sections.
Choose your product by selecting an option from each section.
For example:
3 5 72 EL A M2 R SC
ackset
B
Ordering Notes
Nominate backset as required, eg 60mm 3 • 3570 Primary Locks can be set to achieve all
Fixing lock functions post purchase, and should be
Select the desired fixing method, eg Standard Fixing 35 35 the preferred option when ordering.
L ock Function • Customised locks are available upon request
Select function, eg Vestibule Lock 3572
and incur an additional surcharge and 10 day
E lectrical Variant lead time.
Indicate that this is an Electric Lock 3582EL
afety Function
S • Securafix locks are available in 60mm backset
Select whether lock should be Fail Secure or Fail Safe, eg Fail Safe 3572ELA only and are made to order. 10 day lead time.
Monitoring and Key Override Options • See over page for Primary Lock part numbers.
Select monitoring and cylinders to be supplied, 3572ELAM2
eg Monitored Lock with two cylinders
Handing Chart
Handing
Determine left or right handing, eg Right Handed 3572ELAM2R DOOR OPENING IN
F inish
RIGHT LEFT
Specify appropriate finish, eg Satin Chrome 3572ELAM2RSC HAND INSIDE HAND
OUTSIDE
4 assaabloy.com.au
3570 Series Electric Mortice Lock
Ordering Notes
• Primary locks can be set post purchase to achieve all desired
lock settings e.g. fail safe or fail secure, left hand or right hand,
combination lock (locked both sides) or vestibule lock (locked
outside & free lever inside)
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Non Monitored No Cylinder 3570eln0sc
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Non Monitored 1 Cylinder 3570eln1sc
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Non Monitored 2 Cylinder 3570eln2sc
Electric Mortice Lock 4570 Primary Lock 89mm Backset Non Monitored No Cylinder 4570eln0sc
Electric Mortice Lock 4570 Primary Lock 89 mm Backset Non Monitored 1 Cylinder 4570eln1sc
Electric Mortice Lock 4570 Primary Lock 89 mm Backset Non Monitored 2 Cylinder 4570eln2sc
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Non Monitored No Cylinder 5570eln0sc
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Non Monitored 1 Cylinder 5570eln1sc
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Non Monitored 2 Cylinder 5570eln2sc
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Monitored No Cylinder 3570ELM0SC
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Monitored 1 Cylinder 3570ELM1SC
Electric Mortice Lock 3570 Primary Lock 60 mm Backset Monitored 2 Cylinder 3570ELM2SC
Electric Mortice Lock 4570 Primary Lock 89 mm Backset Monitored No Cylinder 4570ELM0SC
Electric Mortice Lock 4570 Primary Lock 89 mm Backset Monitored 1 Cylinder 4570ELM1SC
Electric Mortice Lock 4570 Primary Lock 89 mm Backset Monitored 2 Cylinder 4570ELM2SC
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Monitored No Cylinder 5570ELM0SC
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Monitored 1 Cylinder 5570ELM1SC
Electric Mortice Lock 5570 Primary Lock 127 mm Backset Monitored 2 Cylinder 5570ELM2SC
5
3570 Series Electric Mortice Lock
14
4
12.7
Accessories - Rebate Kits 29
26.5 1.5
Finish “A” Part Number
Extended Cylinders
“A” Cylinder Cylinder Recommended Door
Projection Length Thickness
41 37 50 to 60
52 48 60 to 84
64 60 84 to 108
80 76 108 to 132
88 84 132 to 156
6 assaabloy.com.au
3570 Series Electric Mortice Lock
Electrical Specifications
12 Pin
Circuit Diagram Connector
Hub
Monitor
Selecion
7
3570/3670 Series Proximity
Mortice Lock & Furniture
General Information
When security, safety, functionality and stylish
design are a priority, there’s only one solution –
Lockwood Proximity Furniture!
Key Features
• Integrated proximity reader -125 Khz HID Prox
• One install one connect
• Fully monitored
Monitoring features:
• Dead latched and locked
• Request to exit/REX
• Multi-voltage - will work on 12-24 Vdc S3 (Security) Australian Lock Standard (AS4145.2.1993)
systems. (when used with equivalent security level keying system)
C-Tick Certified
• LED indication
8 assaabloy.com.au
A 37
57
30
4 B 25
A A 37 37
15
26 26 14 14
24
15 19
18 68 68 39 39
30 30
26 14
70 70
4 4 B B 25 25
54 54 1.5 1.5
15 15 68 39
28.528.5
46 46
15 15 19 19 32 32
38 38
18 18
3570/3670 Technical Information Specification Statement
70
HID Reader HID 125KHz Proximity Reader The lock and door furniture should encompass
Data Output: Weigand 54 1.5
an integrated proximity reader, capable of
Supply voltage: 5-12Vdc
LED: visual indication of reader / lock status28.5 reading HID 125khz proximity technology with
card formats up46 to 85bits. Operational voltage
Lock Voltage 12Vdc - 24Vdc 32
should be between 12-24Vdc. The lock must be
Current 500mA (max) 80mA holding @12Vdc
275mA (max) 50mA holding @24Vdc
capable of monitoring the following functions:
38
Key override, door position / reed switch,
Indicator LED signalling door status independent hub / Request to exit, & locking
Monitoring Dual Key override bar status. All settings – including: fail safe / fail
Deadlatched
secure, handing, hub selection must be field
Locked
Door closed configurable.
Request to exit
Microswitches: 500mA (max) @ 30Vdc each circuit.
Reedswitch: 100mA (max) @ 30Vdc
9
3570/3670 Series Proximity
Mortice Lock & Furniture
For example:
Plate Type Plate Fixing Lever/ Handing Finishes Door
Function Knob Thickness
18 78 SF 70 R CP 55
®
DOOR OPENING IN
Securafix Ordering Notes:
RIGHT LEFT
• One internal plate and one external plate is required HAND INSIDE HAND
• For each set of furniture plates, one must be handed DOOR OPENING OUT
R and one handed L. Furniture plates are ordered INSIDE
separately to the Lock. RIGHT OUTSIDE LEFT
HAND HAND
10 assaabloy.com.au
3570/3670 Series Proximity
Mortice Lock & Furniture
11
3570 Series Room Guard Electric
Mortice Locks & Controller
• Darkroom studios
Function
I n the dormant state, all locks are unlocked and
Standards and Compliance
the LED on the external furniture plate indicates
green. S3 (Security) Australian Lock Standard (AS4145.2.1993)
(when used with equivalent security level keying system)
To lock the lock
1. Close all doors D3 (Durability) Australian Lock Standard (AS4145.2.1993)
C-Tick Certified
3. Simultaneously the lever handles on the
outside of each door will lock and the LED
furniture indication will change to red.
(inside lever will remain free at all times)
12 assaabloy.com.au
3570 Series Room Guard Electric
Mortice Lock & Controller
Standard Two
Room Guard Door Connection
Privacy Controller
Pink
3570 EL Electric 3570 EL Electric
Pink
9/12 Wire adapter to suit 3570 series electric lock SP3570-5861 2 x Interior door furniture 1920/70SC
13
3580 Series Electric Mortice Lock
Key Features
Available in non monitored and monitored
versions.
Monitoring features:
• Dead latched
• Key override
• Request to exit/REX
Available configurations:
• Fail safe or fail secure
• 12Vdc or 24Vdc
• Selection of free lever or locked lever on both D3 (Durability) Australian Lock Standard (AS4145.2.1993)
sides of the door
C-Tick Certified
• Key override monitoring
• LED indication
14 assaabloy.com.au
3580 Series Electric Mortice Lock
Y 36.5 3 25 Y
Limiting Dimensions
X X
Dimension Backset
15 15
32
X 23 25.4 30 38
15 15
Y 36.4 39 43.6 51.7 212.5 155.5
90
18 28
18
79
260 260
1.5
1.5
15
20 15
46 1.5
24 46 1.5
24
32
32
Y
X
24
70 54 38 100 54 86 39
70 54 38 100 54 86 39
15
18
15
28.5
28.5 Reed Magne t
27 1.5 25
27 18 1.5 25
15
3580 Series Electric Mortice Lock
Ordering Procedure
Sample Part Number 3582ELAM2RSC62 is made up of several sections.
Choose your product by selecting an option from each section.
For example:
Backset Door Lock New Safety Sub Handing Finish Options
Material Function Product Function Function
3 58 2 EL A M2 R SC 62
KOM-
(Key overrride moitoring)
ackset
B
Nominate backset as required, eg 23mm 3
Door Material
Nominate door material, eg Metal 358
L ock Function
Select function, eg Vestibule Lock 3582
E lectrical Variant
Indicate that this is an Electric Lock 3582EL
afety Function
S
Select whether lock should be Fail Secure or Fail Safe, eg Fail Safe 3582ELA
Handing
Determine left or right handing, eg Right Handed 3582ELAM2R
F inish
Specify appropriate finish, eg Satin Chrome 3582ELAM2RSC
ptions
O
Specify 24Vdc opion when required 3582ELAM2RSC62
16 assaabloy.com.au
3580 Series Electric Mortice Lock
Accessories
Rebate kits to suit 13 mm rebated timber doors with a minimum backset 14
of 30 mm includes an adaptor to mount the lock and a special strike plate.
Handing of the rebate kits is determined by the opening movement of the 12.7
4
29
door on which the lock is fitted.
26.5 1.5
Extended Cylinders A
A
Extended cylinders should be considered when door thickness exceeds
50 mm or when the lock is mounted off centre in the door edge. A range
of cylinders is available to suit various door thicknesses. Refer to
ASSA ABLOY Australia Keying and Restricted Price List for further information.
41 37 50 to 60
52 48 60 to 84
64 60 84 to 108
80 76 108 to 132
88 84 132 to 156
17
3580 Series Electric Mortice Lock
Electrical Specifications
Circuit Diagram
Note: Diagram depicts fail safe 12V RH opened
door, with handle and key in rest state.
9 Pin
Connector
1 Common
Protection
Red Solenoid Diode
2 Solenoid
EXTERNAL 12V dc
LED
Resistor
3 Common
Reedswitch Deadlatch and
Green door closed status
NO
C
NC
4 Deadlatch and
Hub Monitor door closed status
Switch No. Lock Normal
1 2 3 4 Side Function 5 LED
ON (1)
OFF A N/C
ON
OFF A N/O 6 Hub monitor
(2)
common
ON
OFF
B N/C
NO (3)
ON C
OFF
B N/O
LHS NC
Hub monitor
7 ( LH/RH, NO/NC )
Key Override Monitor Selection (4)
NO
Set the 2 WAY DIL SWITCH to desired C
setting, refer to table. (1)
NO NC DIL
C RHS SWITCH
Switch No. Normal
1 2 Function NC
8 Key override
ON (2) monitor ( NO/NC )
OFF N/O
ON DIL
OFF N/ C SWITCH
Key override
9 monitor common
18 assaabloy.com.au
Electric Mortice Locks
19
ABLOY EL402 Solenoid Lock
General Description
ABLOY EL402 is typically used in the interior
doors of business premises and educational
buildings. The locks include a special double
action bolt for quick and easy use and offer a
cost-effective way of electric locking without
compromising performance. The locks can be
controlled by a variety of electrical impulse
generating equipment such as card readers,
keypads and timers. The locks can be connected
to automatic swing door operators and are an
excellent solution for access control systems.
The new revolutionary adjustable backset
feature offers unique flexibility that’s never been
available before. Because of its symmetrical
trigger bolt, ABLOY EL402 can be used in double
swing doors. The lock can always be opened
mechanically by key or by thumb turn and the
bolt deadlocks automatically when the door
closes.
Key Features
• Field selectable Fail Safe/Fail Secure
configuration
Applications
• Offices
• Storage rooms
• Consulting rooms
(All Narrow style)
20 assaabloy.com.au
ABLOY EL402 Solenoid Lock
43 /
45 /
48 /
50
5
+ red
40 /
0/3
3/3 black
25 /
28 / 3 12 - 24 Vdc yellow
blue
12 Common black green
19
Locked yellow
1.5
5.5x2
Open blue
24
-
15
23.5
8
47.5
153.5
4
225
13
200
129.5
14.5
24
87
25
41.5
3
40
Specification Statement
EL402 Solenoid Lock Technical Information
The mortice lock must consist of High grade
Voltage 12-24 Vdc -10%/ +15% STAB pure zinc alloy, the lock needs to have an
Current 550mA (max) 240mA holding @12Vdc adjustable backset 25,28,30,33 and 35mm.
270mA (max) 110mA holding @24Vdc The latch bold must be no less than 14.5mm
Monitoring Microswitch 0.4A 30V AC
with complete double action trigger. The
(deadlock status) voltage must be variable between 12-24Vdc
Environment Operational temperature range with tolerance of 10% up or down. The lock and
-20°C to +60°C unlocked status must be fully monitored by
Case/Cover High Purity zinc alloy
means of dry contacts.
Forend 25mm
Ordering Information
Backset 25, 28, 30, 33, 35mm (adjustable)
Product Description Part Number
Latchbolts Double action latch 14.5mm
21
ABLOY EL502 Solenoid Lock
General Description
ABLOY EL502 is typically used in the interior
doors of business premises and educational
buildings. The locks include a special double
action bolt for quick and easy use and offer a
cost-effective way of electric locking without
compromising performance. The locks can be
controlled by a variety of electrical impulse
generating equipment such as card readers,
keypads and timers. The locks can be connected
to automatic swing door operators and are an
excellent solution for access control systems.
The new revolutionary adjustable backset
feature offers unique flexibility that’s never been
available before. Because of its symmetrical
trigger bolt, ABLOY EL502 can be used in double
swing doors. The lock can always be opened
mechanically by key or by thumb turn and
the bolt deadlocks automatically when the
door closes.
Key Features
• Field selectable Fail Safe/ Fail Secure
configuration
• Backset 50mm
Applications
• Offices
• Storage rooms
• Consulting rooms
Note: The EL402 is not recommended;
22 assaabloy.com.au
ABLOY EL502 Solenoid Lock
75
+ red
black
50 12 - 24 Vdc yellow
37.5
blue
29
Common black green
12 Locked yellow
19
Open blue
6.5
25.5
-
102
15
8
10.5
6.5
30
105
4
147
225
203
13
14.5
24
5.5
30
22
Specification Statement
EL502 Solenoid Lock Technical Information
This mortice lock must consist of High grade
Voltage 12-24 Vdc -10%/ +15% STAB pure zinc alloy, the lock needs to have a
Current 12V Max 550 mA, Normal 240mA backset 50mm. The latch bold must be no less
24V Max 270mA, Normal 110mA than 14.5mm with complete double action
Monitoring Microswitch 0.4A 30V AC
trigger. The voltage must be variable between
(Deadlock status) 12-24Vdc with tolerance of 15% up or 10%
Environment Operational temperature range down. The lock and unlocked status must be
-20°C to +60°C fully monitored by means of dry contacts.
Case/ Cover High Purity zinc alloy
Door Clearance 3-5 mm ABLOY EL 502 Electric mortice Solenoid Lock EL502
Cylinder ABLOY classic or Abloy Disklock Pro Cable 6m for EL502 EA211
Scandanavian oval type
23
ABLOY EL580 Solenoid Lock
General Information
ABLOY EL580 Locks are suitable for interior or
exterior doors of business premises and the
exterior doors of apartment buildings and
detached houses.
Key Features
• Interchangeable handing
• Changeable function of handle control
• Configurable fail safe or fail secure
• 12-24Vdc operating voltage
• Configuration of deadbolt either 14mm or
20mm
• Increased protection against manipulation
• Low current feature while continuous control
Applications
• Offices
• Storage rooms
• Consulting rooms
• Fire Doors
Ordering Information
Product Description Part Number
24 assaabloy.com.au
Electric Mortice Locks
25
ABLOY EL648 Motor Lock
General Information
The EL648 is a heavy duty motor lock with
hook bolt for narrow style doors. They provide
superior mechanical strength against physical
attack. The EL648 is used in high security
auxiliary lock in applications such as gates and
exterior doors of industrial premises, shopping
centres, business premises etc. The lock is
especially suited for sliding doors as it can be
installed in the door frame or the door leaf.
EL648 is ideal for night locking that requires
greater strength and security. The lock can be
controlled by a variety of electrical impulse
generating equipment such as a card reader,
keypad or timer. This lock is suitable for use with
sliding door operators.
Key Features
• High security motor bolt.
26 assaabloy.com.au
ABLOY® EL648 can be configured to fail locked or fail unlocked mode
ABLOY EL648 failure
EA300 with Lock a backup card connected to the EA460 control unit).
Motor(requires
ng screws and ABLOY® EL654 enables data communication between lock case and cont
When installed together with EL480 / EL482 / EL402 / EL490, the
following options for operation: - both locks are deadlocked
- EL480 / EL482 / EL402 / EL
deadlocked, EL654 is open
��
��� - both locks are open
� � �
��
WIRING PRINCIPLE
��
��
��
���� ���� ����
��
��
EL648
! %#!& %
��
���
��
��
��
���
!$
"
���
!!#
���
��
�� ' !%
!!#! %% !%
��
�� %$%##
���
�
���
EL654 &%*(&#+%!*
-! *
'%
��
Specification,$
Statement
EL648 Motor Lock Technical Information #&"
The mortice lock must consist of high
grade pure
+(!*-&#* &'%
Voltage 24Vdc ± 15% stabilised zinc alloy. The bolt must be controlled by+(!*-&#*
means of #&"
&'%
motor and the shape of the bolt must
be in hook
Abloy
AbloyOy
Abloy Oy
Oy
Wahlforssinkatu
Wahlforssinkatu 20
20 27
Wahlforssinkatu
P.O.
P.O.Box
Box 108
108
20
Power Transfer Lead
Features:
• Provides unbroken connection from controller
to lock, for cable up to 8 mm diameter.
Applications
LC8810
LC8811
The LC8811 is designed for use on doors which
open more than 120°, or have a gap from pin
hinge to door frame of more than 20 mm. NB.
Not suitable for centrally pivoted doors.
4
Successfully fire rated up to 4hrs on fire door assemblies
in accordance with AS1905.1. 2005
Hour
28 assaabloy.com.au
Power Transfer Lead
LC8810 LC8811
The LC8810 is a shorter unit suitable for hinged The LC8811 is designed for use on doors which
doors which open to 90° (maximum of 120°). open more than 120°, or have a gap from pin
hinge to door frame of more than 20 mm.
NB. Not suitable for centrally pivoted doors.
90°
120° 120°
29
20
O10
29
29
20
O10
20
29
O10
20
O10
460
460
O12
478
O12
250
478
258
250
519
258
519
543
299
543
299
323
323
O12 12
O
O12
O12
17
O12
23.8
17
17
O12
23.8
17
17
Ordering Information 17
29
ASSA ABLOY is the global leader in door opening
solutions, dedicated to satisfying end-user needs
for security, safety and convenience.
ASSA ABLOY is represented in all major regions,
in both mature and emerging markets, with
leading positions in Australia, Europe and
North America.
As the world’s leading lock group, ASSA ABLOY
offers a more complete product range of door
opening solutions than any other company
on the market.
Head Office
ASSA ABLOY Australia Pty Limited
235 Huntingdale Road, Oakleigh
Victoria, 3166 Australia
AAA-CAT-069 0609 MS0458
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2009