Professional Documents
Culture Documents
Strainers
Strainers
Tackle the challenges you face with innovative Alfa Laval solutions for hygienic applications. Regularly updated, this convenient
online catalogue gives you fast access to our comprehensive product range.
Sustainability is at the core of Alfa Laval technologies. These hygienic components and equipment can help you reduce
emissions, contamination risks, energy and water use, and total cost of ownership. They also increase uptime, safety and
product integrity.
Wherever you are, you have fast access to the components, equipment and expertise you need through the Alfa Laval global
network of more than 1500 partners, supported by our sales companies worldwide. Using our eBusiness portal, our channel
partners can locate the products you need, order equipment, or track shipments in real time.
To make your life easier, take advantage of Alfa Laval tools and resources. Simply click on the sales item number to view or
download 3D CAD models and 2D drawings from our CAD portal. Or download product documentation, including Q-doc
documentation for our UltraPure portfolio, here.
www.alfalaval.com
Pumps Centrifugal pumps
Aseptic Mixproof Unique Mixproof Unique Mixproof 3-body Unique Mixproof UltraPure Unique Mixproof Large Particle Unique Mixproof Tank Outlet
Unique DV-ST UltraPure DV-ST Multiport SBV Sanitary Koltek Valves Unique RV-ST Unique RV-P CPM-2
Agitators Mixers
ALS and ALS-SB ALB ALT ALTB Hybrid Powder Mixer Rotary Jet Mixer
Installation Hygienic tubes and fittings UltraPure tubes and fittings Filters and strainers
material
Flanges, clamps and unions Bends, tees and reducers Tubes and tube support UltraPure tubes and fittings Strainers
Rotary lobe pumps
LKH Multistage LKH Prime LKH Prime UltraPure SolidC SolidC UltraPure MR OptiLobe
Unique Mixproof Horizontal Tank SMP-BC SMP-BC 22 Unique SSV Unique SSV Change-over Unique SSV Aseptic SSV Tangential
CPM-2 LKC-2 Non-Return LKC UltraPure Unique Vacuum Breaker LKUV-2 Air-Relief LKBV Air-Blow Safety Valve SB Anti Vacuum House
Fusion-bonded Brazed
plate heat exchangers plate heat exchangers
MultiJet 45 GJ 4 SaniMicro SaniMidget SaniMagnum SaniMidget SB SaniMagnum SB SaniMega SB LKRK Static Spray Ball
Tank covers
Spiral membranes Plate and frame module Flat sheet membranes Test units Housing ATD Couplers
Circumferential piston pumps Twin screw pumps
Butterfly valves
Unique SSV Tank Outlet Unique SSV Manual Unique SSSV Small Single Seat LKAP Air-Operated LKB LKB-F LKB UltraPure
Sampling valves
SB Anti Vacuum Valve SB Pressure Relief Valve Unique Sampling Valve SB Membrane Sample Valve SB Micro Sample Port SB Micro Sample Port Type M
Welded spiral Welded plate and Scraped surface Tubular heat exchangers
heat exchangers block heat exchangers heat exchangers
Spiral Heat Exchangers Combabloc Free Flow Contherm Pharma-line S and P Pharma-line Point of Use
PlusClean®/PlusClean® UltraPure ThinkTop® V70 ThinkTop® V50 ThinkTop® D30 ThinkTop® Basic Intrinsically Safe IndiTop Unique Control LKB
Safety filters Service kits Service tools valves Service tools mixing and blending Service tools tank cleaning Service tools pumps
Alfa Laval Stainless Steel and Rubber Materials
Technical Information
Stainless Steel
Our stainless steel material have the following demands to the contents of the most essential alloys:
Rubber Materials
In order to obtain the longest possible lifetime for rubber seals it is essential to choose the right quality for the actual duty.
Consequently when choosing rubber quality, the characteristics of the different rubber types should be considered. All product
wetted rubber material are in conformity of FDA.
Silicone rubber, Q
The most significant quality of silicone rubber is that it can be applied from temperatures below -50°C (-58°F) to approx.
+ 180°C (356°F) and still keep its elasticity. The chemical resistance is satisfactory to most products. However, undiluted lye and
acids as well as hot water and steam may destroy silicone rubber. The resistance to ozone is good.
Ratings
1 = Unsuitable.
2 = Limited suitability.
3 = Normal suitability.
4 = High suitability.
The table contains data which have been compiled from the results of our own tests and the recommendations of our raw
material suppliers. The data should be considered as recommendations only and will be brought up-to-date from time to time.
They are based on constant contact with the specified product.
In case of doubt or lack of information it would be advisable to consult us directly, which will enable us to investigate specific
applications.
Notes
Designation of flexible rubber materials Abbreviation symbol
1) Nitrile rubber N
2) Hydrogenated actylonitrile rubber H
3) Ethylene propylene rubber E
4) Silicone rubber Q
5) Fluorinated rubber F
6) Polytetraflour ethylene
Compliance and certification
We can provide documented and certified compliance with a broad spectrum of relevant international and local hygiene
standards, worldwide. This helps you significantly reduce the engineering costs of setting up and operating standard-compliant
processing plants around the world.
Please find below some examples of regulations, standards, and guidelines applicable to our products used in hygienic
applications.
For special requests please contact your local Alfa Laval organization.
The mission of 3-A SSI is to enhance product safety for consumers of food, beverages, and
pharmaceutical products through the development and use of 3-A Sanitary Standards and 3-A
Accepted Practices. The 3-A symbol is a registered mark used to identify equipment that meets 3-A
Sanitary Standards for design and fabrication.
ATEX-directive is the popular name for the European Directive 2014/34/EU setting the rules for
equipment and protective systems intended for use in potentially explosive atmospheres.
The framework regulation (EC) No. 1935/2004 regulates food contact materials and articles within
EU. It includes several requirements for materials and articles intended to come into contact with
food to ensure material safety.The glass and fork symbol may be used to indicate that the relevant
requirements stated in (EC) No. 1935/2004 are met.
CE marking is a mandatory conformity mark for products placed on the market in the European
Economic Area (EEA). With the CE marking on a product the manufacturer ensures that the product
conforms with the essential requirements of the applicable EC directives. The letters "CE" stand for
"Conformité Européenne" ("European Conformity").
UKCA marking is a mandatory conformity mark for products placed on the market in Great Britain
(England, Scotland, and Wales). With the UKCA marking the manufacturer ensures that the product
conforms with the relevant requirements of the applicable legislations.
Within United States, requirements for food contact materials and articles are specified by the Food
and Drug Administration (FDA) and are regulated under the Code of Federal Regulations, Title 21
“Food and drugs”, Parts 170-199 “Food for human consumption”.
USP Class VI / The United States Pharmacopeia (USP) standards, chapter 87 and 88, and International Organization
ISO 10993 for Standardization (ISO) standard 10993, sections 5, 6,10 and 11, specifies requirements to ensure
biocompatibility of product contact parts intended to be used in pharma applications.
.......
Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
..
This page is intentionally left blank
Strainers
Product leaflet
.LKSF
............... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
..
.LKVF
. . . .Coarse
. . . . .Strainer
...... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
..
.LKIF
. . . Inline
. . . . Strainer
........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
..
Ordering leaflet
.LKSF-CL ..................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
..
.LKSF-CL. . . . . .options
............... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
..
......................
LKSF-BL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
..
.LKSF-BL
. . . . . .options
............... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
..
.LKVF . . . .Coarse
. . . . .Strainer
............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
..
.LKVF. . . .Coarse
. . . . .Strainer
. . . . . .options
...... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
..
.LKVF-B
. . . . . Coarse
. . . . . Strainer
. . . . . . Battery
..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
..
.LKVF
. . . .Strainer
. . . . . Element
............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
..
.LKIF
. . . Inline
. . . . Strainer
.............. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
..
Alfa Laval LKSF
Filters and strainers
Introduction
The Alfa Laval LKSF Slot Strainer is a filter which separates
solid matter from liquid that flows through it. The impurities are
stopped by the filter element. When the filter is full of particles,
it can be cleaned by removing the clamp and pulling out the
filter element.
Application
The LKSF Slot Strainer is designed to fulfil basic filtration
duties in hygienic applications across the dairy, food,
beverage and brewery industries to protect equipment and
product.
Benefits
• Fine filtration
• Easy to install
• Easy to clean
• High durability
• Flexible filter element selection
Standard design
The LKSF Slot Strainer consist of a housing in which the
strainer element is fitted centred. There are two types of LKSF
at B. The upper valve is open during operation and the lower
Slot Strainers: the LKSF-BL with housing in two parts and the
is closed. The impurities will collect between the two valves.
LKSF-CL with housing in three parts for vertical installation.
Closing the upper valve and opening the lower one will empty
To allow for quick dismantling for cleaning, the housing is the impurities with minimal product loss.
assembled by means of clamps. The upper clamp ring has a
The filter can be cleaned as LKSF-BL. The degree of filtering
wing nut for manual operation. The strainer element has direct
can be altered by changing filter element. Strainer type LKSF-
access to the end cover with welded handle to facilitate
CL must always be installed vertically. The filtration degree
dismantling when cleaning is required.
may be immediately adjusted by changing the strainer
The strainer element is available from 53 µm to 4 mm. Various element.
male parts are also available to attach the strainer to a
process line.
Working principle
Type LKSF-BL: The product enters from the bottom. The filter
element captures impurities. When the filter is full of particles,
it can be cleaned by removing the clamp and pulling out the
filter element. It is also possible to reverse the flow and flush
out the impurities (backflush).
Type LKSF-CL: The product enters the filter from the side.
Most of the impurities collect at the bottom and can be
manually emptied during operation via a valve. Automatic
discharge is also possible using two remote controlled valves
12
TECHNICAL DATA
Pressure
Max. working pressure. (20 °C): 1000 kPa (10 bar)
Temperature
Temperature range: -10 to +140 oC (EPDM)
Note!
Separate pressure drop/capacity diagrams are available on request.
4413-0000 4413-0001
A B
PHYSICAL DATA
Materials
Product wetted steel parts: AISI 316
Other steel parts: AISI 304
Seals: EPDM rubber
Surface finish: Semi bright
13
The LKSF strainer element is welded at every intersection of vertical rod and surface wire
Ordering
When ordering please specify strainer element, type of male part and position. (See: Connection position).
14
Connection Position
C
C C
4413-0005
A
4413-0003
Figure 5. LKSF-BL
A 4413-0004
(101.6 mm)
A
Figure 3. LKSF-CL
Figure 4. LKSF-BL
(25-76.1 mm)
Dimensions
Size 25 mm 38 mm 51 mm 63.5 mm 76.1 mm 101.6 mm
A1 727 727 727 727 727 820
A2 852 808 766 727 688 693
B1 632.5 632.5 632.5 632.5 632.5 705
B2 756 712 670 631 592 583
C 130 130 130 130 130 150
OD1 25.4 38.1 50.8 63.5 76.2 101.6
ID1 22.2 34.9 47.6 60.3 73 97.6
t1 1.6 1.6 1.6 1.6 1.6 2
OD2 63.5 63.5 63.5 63.5 63.5 63.5
ID2 60.3 60.3 60.3 60.5 60.3 60.3
t2 1.6 1.6 1.6 1.6 1.6 1.6
OD3 25 38 51 63.5 76.1 101.6
ID3 22.6 35.6 47.8 60.3 72.1 97.6
t3 1.2 1.2 1.6 1.6 2 2
E 86 86 86 86 86 86
Weight (kg) 8.7 9.2 9.0 8.5 9.0 9.5
15
E E
OD1
OD1
ID1
ID1
t1
t1
c
OD1
ID1
A1
A1
t1
B1
B1
t2 4413-0006
ID2 t3 4413-0007
OD2 ID3
OD3
Figure 6. LKSF-CL
Figure 7. LKSF-BL
16
Alfa Laval LKVF Coarse Strainer
Filters and strainers
Introduction
The Alfa Laval LKVF Coarse Strainer is a type of filter used to
remove coarse particles from liquids from 1 to 3 mm.
Application
The Alfa Laval LKVF Coarse Strainer is designed to remove
coarse particles from the liquid flow to protect pumps or other
sensitive equipment from damage. It is used on a wide range
of applications across the dairy, food, beverage and brewery
industries.
Benefits
• Safeguards membrane filtration, pumps and other
equipment from damage
• Easy to install and clean
• High durability
• Flexible filter element selection
Standard design
The LKVF Coarse Strainer consists of a housing with inlet and
outlet. Inside the housing, the filter element is fixed to allow
the flow to be forced through it. This element consists of a
perforated tube which is welded to a flange with a handle.
This flange fits a ferrule on the casing to which it is clamped.
Working principle
The recommended flow direction is to allow the liquid to enter
the inlet (A). The particles strained collect inside the filter
element which facilitates cleaning, especially if the handle
points downwards or if the strainer is installed in a horizontal
position. The liquid leaves the strainer through the side outlet
(B).
17
TECHNICAL DATA
Pressure
Max. product pressure (A=inlet): 1000 kPa (10 bar)
Max. product pressure (B=inlet): 700 kPa (7 bar)
Min. product pressure: Full vacuum
Temperature
Temperature range: -10 oC to 140 oC (EPDM)
Strainer area
25-38-51 mm: 430 cm2
63.5-76.1 mm: 840 cm2
PHYSICAL DATA
Materials
Product wetted steel parts: Acid-resistent steel AISI 316
Other steel parts: Stainless steel AISI 304
Seals: EPDM rubber
Surface finish: Semi bright
Material grades Seal of nitrile (NBR) or PTFE
Sizes
25 mm, 38 mm, 51 mm, 63.5 mm and 76.1 mm.
Filter element
d
d C Perforation
mm mm
1 2.0 23%
2 3.5 30%
3 5.0 33%
Note!
Separate pressure drop/capacity diagrams are available on request.
18
Dimensions (mm)
A1 M
B
(B)
M
E
OD
ID
(A)
t
Size 25 mm 38 mm 51 mm 63.5 mm 76.1 mm
A 419 375 333 460 421
B 288 244 202 352 313
OD 25 38 51 63.5 76.1
ID 22.6 35.6 48.8 60.3 72.1
t 1.2 1.2 1.1 1.6 2
E 121 77 77 94 94
M/DS male 18.5 20 20 24 24
M/SMS male 15 20 20 24 24
M/ISO male 21.5 21.5 21.5 21.5 21.5
M/BS male 22 22 22 22 22
M/DIN male 22 22 22 25 30
M/ISO clamp 21.5 21.5 21.5 21.5
Weight (kg) 1.5 1.5 1.5 3.7 3.7
90
80
70
60
50
40
30
20
10
10 20 30 40 50 60 70 80 90 100 200
Q[m³/h]
Figure 1. LKVF with ø2 mm holes in filter element. Medium: water (20 oC).
Ordering
Please state the following when ordering:
• Size
• Connections if not welding ends
• Size of holes in straining element, 1, 2 or 3 mm
• Options
19
Alfa Laval LKIF Inline Strainer
Filters and strainers
Introduction
The Alfa Laval LKIF Inline Strainer is an inline strainer intended
for process lines in hygienic applications. It provides a safe
and economic method to remove particles from liquids in
process flows. The filter can easily be removed for cleaning.
Application
The LKIF Inline Strainer is designed to remove particles and
other impurities from product flows and to protect pumps and
other sensitive equipment across the dairy, food, beverage,
brewery, chemical and pharmaceutical industries.
Benefits
• Hygienic filtration
• Safe and economic method for removal of impurities
• Helps extend product shelf life
• Easy to clean
Standard design
The LKIF Inline Strainer consists of a perforated filter element
with filter ring and seal rings. Optional clamp rings, clamp seal
rings, and clamp liner, or DS and SMS unions are available.
Working principle
The Alfa Laval LKIF Inline Strainer is installed in process lines
and removes particles and impurities as the product flows
through the lines. Particles accumulate inside the filter, which
can easily be removed for cleaning. If required, the liquid can
flow in the opposite direction.
20
TECHNICAL DATA
Temperature
Min. temperature: -10 °C to 140 °C (EPDM)
Pressure
Max. product pressure: 1000 kPa (10 bar)
Min. product pressure: Full vacuum
Sizes
25 mm (1"), 38 mm (1 1/2"), 51 mm (2"), 63.5 mm (2 1/2"), 76.1 mm (3"), and 101.6 mm (4"). 1000 kPa (10 bar)
PHYSICAL DATA
Materials
All wetted parts: Acid-resistant steel AISI 316
Other steel parts: Stainless steel AISI 304
Seals: EPDM rubber
Other seals: Nitrile (NBR) and PTFE, if clamps
Finish: Semi bright
Ordering
Please state the following when ordering: - Size. - Male type.
100
80
60
50
40
30
20
10
1 2 3 4 5 6 8 10 20 30 40 5060 80100 200 300
Q[m³/h]
Note!
For the diagram the following applies: Medium: Water (20 °C). Measurement: In accordance with VDI
2173.
1.25
2.25
(mm)
21
Dimensions (mm)
A
44120005
44120006
D D
Parts List
A
H
I
B
J
C
D K
E L
F M 44120003
G
Figure 5. DS and SMS unions.
Figure 4. Clamp ends. H. Filter with ring.
A. Filter with ring. I. Male part welded.
B. Clamp-liner welded. J. Seal ring.
C. Seal ring. K. Union nut.
D. Clamp ring. L. Special seal ring.
E. Clamp seal ring. M. Liner welded.
F. Clamp-liner welded.
G. Replacement ring.
22
ALSIS Code: 5617 Material: 1.4401 (316)
Seals: EPDM
mm µm OD1/ID1xt1 OD2/ID2xt2 A1 B1
Welding ends
9612926601 25.0 74.0 25.4/22.2 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926602 25.0 105.0 25.4/22.2 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926603 25.0 177.0 25.4/22.2 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926604 25.0 500.0 25.4/22.2 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926606 25.0 1000.0 25.4/22.2 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926608 38.0 74.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926609 38.0 105.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926610 38.0 177.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926611 38.0 500.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926612 38.0 707.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926613 38.0 1000.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926614 38.0 2000.0 38.1/34.9 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926615 51.0 74.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926616 51.0 105.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926617 51.0 177.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926618 51.0 500.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926619 51.0 707.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926620 51.0 1000.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926621 51.0 2000.0 50.8/47.6 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926622 63.5 74.0 50.8/47.6 x 1.7 63.5/60.3 x 1.7 727.0 632.5
9612926623 63.5 105.0 50.8/47.6 x 1.8 63.5/60.3 x 1.8 727.0 632.5
9612926624 63.5 177.0 50.8/47.6 x 1.9 63.5/60.3 x 1.9 727.0 632.5
9612926625 63.5 500.0 50.8/47.6 x 1.10 63.5/60.3 x 1.10 727.0 632.5
9612926626 63.5 707.0 50.8/47.6 x 1.11 63.5/60.3 x 1.11 727.0 632.5
9612926627 63.5 1000.0 50.8/47.6 x 1.12 63.5/60.3 x 1.12 727.0 632.5
9612926628 63.5 2000.0 50.8/47.6 x 1.13 63.5/60.3 x 1.13 727.0 632.5
9612926629 76.1 74.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926630 76.1 105.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926631 76.1 177.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926632 76.1 500.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926633 76.1 707.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926634 76.1 1000.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926635 76.1 2000.0 76.2/73 x 1.6 63.5/60.3 x 1.6 727.0 632.5
9612926636 101.6 74.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926637 101.6 105.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926638 101.6 177.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926639 101.6 500.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926640 101.6 707.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926641 101.6 1000.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
9612926642 101.6 2000.0 101.6/97.6 x 1.6 63.5/60.3 x 1.6 820.0 705.0
NOTE! NBR and FPM available on request. For further information - please see PD-sheet.
23
Product
Item no. Type Size Options
code
mm inch
Male part
5617 LKSF-CL 25.0 1.0
5617 LKSF-CL 38.0 1.5
5617 LKSF-CL 51.0 2.0
State type of male part and male part positions.
5617 LKSF-CL 63.5 2.5
See product leaflet.
5617 LKSF-CL 76.1 3.0
5617 LKSF-CL 101.6 4.0
Replacement of seals
5617 LKSF-CL 25.0 - 101.6 1.0 - 4.0 Replacement to seals of Fluorinated rubber (FPM)
5617 LKSF-CL 25.0 - 101.6 1.0 - 4.0 Replacement to seals of Nitrile (NBR)
24
ALSIS Code: 5617 Material: 1.4401 (316)
Seals: EPDM
mm µm OD1/ID1xt1 OD2/ID2 A1 B1
Welding ends
9612926643 25.0 74.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926644 25.0 105.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926645 25.0 177.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926646 25.0 500.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926647 25.0 707.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926648 25.0 1000.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926649 25.0 2000.0 25.4/22.2 x 1.6 25/22.6 x 1.2 852.0 756.0
9612926650 38.0 74.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926651 38.0 105.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926652 38.0 177.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926653 38.0 500.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926654 38.0 707.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926655 38.0 1000.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926656 38.0 2000.0 38.1/34.9 x 1.6 38/35.6 x 1.2 808.0 712.0
9612926657 51.0 74.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926658 51.0 105.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926659 51.0 177.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926660 51.0 500.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926661 51.0 707.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926662 51.0 1000.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926663 51.0 2000.0 50.8/47.6 x 1.6 51/47.8 x 1.6 766.0 670.0
9612926664 63.5 74.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 727.0 631.0
9612926665 63.5 105.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 727.0 631.0
9612926666 63.5 177.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 727.0 631.0
9612926667 63.5 500.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 727.0 631.0
9612926668 63.5 707.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 727.0 631.0
9612926669 63.5 1000.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 752.0 631.0
9612926670 63.5 2000.0 63.5/60.3 x 1.6 63.5/60.3 x 1.6 752.0 631.0
9612926671 76.1 74.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926672 76.1 105.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926673 76.1 177.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926674 76.1 500.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926675 76.1 707.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926676 76.1 1000.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926677 76.1 2000.0 76.2/73 x 1.6 76.1/72.1 x 2.0 688.0 592.0
9612926678 101.6 74.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926679 101.6 105.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926680 101.6 177.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926681 101.6 500.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926682 101.6 707.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926683 101.6 1000.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
9612926684 101.6 2000.0 101.6/97.6 x 1.6 101.6/97.6 x 2.0 683.0 583.0
NOTE! NBR and FPM available on request. For further information - please see PD-sheet.
25
Product
Item no. Type Size Options
code
mm inch
Male part
5617 LKSF-BL 25.0 1.0
5617 LKSF-BL 38.0 1.5
5617 LKSF-BL 51.0 2.0
State type of male part and male part positions.
5617 LKSF-BL 63.5 2.5
See product leaflet.
5617 LKSF-BL 76.1 3.0
5617 LKSF-BL 101.6 4.0
Replacement of seals
5617 LKSF-BL 25.0 - 101.6 1.0 - 4.0 Replacement to seals of Fluorinated rubber (FPM)
5617 LKSF-BL 25.0 - 101.6 1.0 - 4.0 Replacement to seals of Nitrile (NBR)
26
ALSIS Code: 5609 Material: 1.4401 (316)
Seals: EPDM
mm mm OD/ID x t A B E
27
Product
Item no. Type Size Options
code
mm inch
Male part
5609 LKVF 25.0 1.0
5609 LKVF 38.0 1.5
State type of male part and male part positions.
5609 LKVF 51.0 2.0
See product leaflet.
5609 LKVF 63.5 2.5
5609 LKVF 76.1 3.0
Seal
5609 LKVF 25.0 - 51.0 1.0 - 2.0 Replacement to seals of PTFE
5609 LKVF 25.0 - 51.0 1.0 - 2.0 Replacement to seals of Fluorinated rubber (FPM)
5609 LKVF 25.0 - 51.0 1.0 - 2.0 Replacement to seals of Nitrile (NBR)
5609 LKVF 63.5 - 76.0 2.5 - 3.0 Replacement to seals of PTFE
5609 LKVF 63.5 - 76.0 2.5 - 3.0 Replacement to seals of Nitrile (NBR)
5609 LKVF 63.5 - 76.0 2.5 - 3.0 Replacement to seals of Fluorinated rubber (FPM)
28
ALSIS Code: 5609 Material: 1.4401 (316)
mm A B
29
ALSIS Code: 5609 Material: 1.4401 (316)
mm B
30
ALSIS Code: 5616 Material: 1.4401 (316)
mm A D1
Clamp ends
9612025701 25.0 98.6 47.6
9612025702 38.0 137.8 47.6
9612025703 51.0 192.1 47.6
9612025704 63.5 238.6 54.1
9612025705 76.1 248.6 54.1
9612025706 101.6 273.6 54.1
31
This is Alfa Laval
Alfa Laval is active in the areas of Energy, Marine,
and Food & Water, offering its expertise, products,
and service to a wide range of industries in some
100 countries. The company is committed to
optimizing processes, creating responsible growth,
and driving progress – always going the extra mile to
support customers in achieving their business goals
and sustainability targets.
100003597-2-EN 2305