Professional Documents
Culture Documents
Error Se9302-4
Error Se9302-4
Error Se9302-4
SAE code
MID/Control Unit MID249 V2ECU
PID/PPID/SID/PSID PPID1468 OBW Rubber Spring Right, load cell
Machine display message
Text presentation SE9302
Fault mode Detection conditions:The vehicle control unit 2 (V2-ECU) registers: that the voltage is
FMI 3 above 4.8 V (V2B18)
Symptom: Possible causes:
Ref: Service Tip ART 371 18 ST - Mixed connector positions in wiring harness
Fault mode Detection conditions:The vehicle control unit 2 (V2-ECU) registers: that the voltage is
FMI 4 below 0.2 V (V2B18)
Symptom: Possible causes:
Ref: Service Tip ART 371 18 ST - Mixed connector positions in wiring harness
Guided Diagnostics