Professional Documents
Culture Documents
$RI5QA26
$RI5QA26
$RI5QA26
Europe
Edition 1
Grau Product Catalogue
Europe INTRODUCTION
Introduction
This catalogue provides an overview of Grau products for the European aftermarket.
They include air tanks and saddles, fittings, air coils and air tubes as well as electrical
coils.
Durable and reliable, Grau products are thoroughly tested for compliance with Haldex
standards and come with a full warranty.
This catalogue presents detailed information about each product range for easy
identification of required items. Inclusion or exclusion of an item has no bearing on its
availability. For availability, please contact Haldex directly.
We hope you find this catalogue useful. We welcome all feedback and suggestions for
improvement.
Although Haldex does its best to ensure the accuracy of all information in this catalogue, Haldex assumes no responsibility for any issues that may arise as a result of
inaccurate data in this catalogue. Haldex reserves the right to amend this information without notice.
Plugs and sockets Page Air coils and air tubes Page
ABS system 8 Air coils 20
Bulkhead union 45
Bulkhead elbow 49
Accessories 50
ABS system 8
EBS system 9
Application
Included
number
Voltage
System
Colour
Note
Type
Fuse
Part
(V)
042572209 pin power ISO 7638 universal - fused 12-24 male, 1.5mm
MODAL /
950364072 socket power ISO 7638 green pins ×5 (crimp) fused 24 5×1.5mm²
MODULAR
(3/5)×1.5mm²
950364436 socket power ISO 7638 universal blue pins ×7 (screw) fused 24
+ 2×4mm²
950364072
Weight (kg)
Application
Length (m)
Included
number
950610020 socket power ISO 7638 - pins ×7 (crimp) 0.37 for EB+
parking
950610030 power ISO 7638 - pins ×7 0.12
socket
950610040 eco flex coil power ISO 7638 3.5 pins ×7 1.162 EBS, 5×1,5mm² + 2×4mm²
950610050 eco flex coil power ISO 12098 3.5 pins ×15 -
950611030 eco flex coil power ISO 1185 (24N) 3.5 pins ×7 - 6×1,5mm² + 1×2,5mm²
950611040 adaptor eco flex coil 3.5 pins ×15 - for ISO 12098, ISO 1185, ISO 3731
AIR TANKS
Length L1
Diameter
Standard
Length L
Capacity
Material
number
Weight
(mm)
(mm)
(mm)
Type
Port
Part
(kg)
(L)
0301020615C C (2+1+1 = 4 ports) aluminium 10 206 375 259 M22×1,5 EN286-2 2.25
0302020615C C (2+1+1 = 4 ports) aluminium 20 206 700 563,5 M22×1,5 EN286-2 3.9
0302024615C C (2+1+1 = 4 ports) aluminium 20 246 510 370 M22×1,5 EN286-2 3.65
0304024615C C (2+1+1 = 4 ports) aluminium 40 246 945 805 M22×1,5 EN286-2 6.4
0304027615C C (2+1+1 = 4 ports) aluminium 40 276 766 612 M22×1,5 EN286-2 5.75
0304031013C C (2+1+1 = 4 ports) aluminium 40 310 629 427 M22×1,5 EN286-2 5.6
0306027613C C (2+1+1 = 4 ports) aluminium 60 276 1111 957 M22×1,5 EN286-2 8.3
0306031013C C (2+1+1 = 4 ports) aluminium 60 310 907 707 M22×1,5 EN286-2 7.7
03006031013U U (1+1+1+2 = 5 ports) aluminium 60 310 898 690 M22×1,5 EN286-2 7.8
0306039612C C (2+1+1 = 4 ports) aluminium 60 396 583 316 M22×1,5 EN286-2 6.7
0308031013C C (2+1+1 = 4 ports) aluminium 80 310 1180 980 M22×1,5 EN286-2 9.7
0308039612C C (2+1+1 = 4 ports) aluminium 80 396 748 501 M22×1,5 EN286-2 8.6
03010039612C C (2+1+1 = 4 ports) aluminium 100 396 913 671 M22×1,5 EN286-2 10
03012039612C C (2+1+1 = 4 ports) aluminium 120 396 1074 807 M22×1,5 EN286-2 11.8
A A
Air tanks
L1 A
A A A
L1
Length L1
Diameter
Standard
Length L
Capacity
Material
number
Weight
(mm)
(mm)
(mm)
Type
Port
Part
(kg)
(L)
030350109 C (2+1+1 = 4 ports) steel 8,5 206 315 190 M22×1,5 EN286-2 4
030350209 C (2+1+1 = 4 ports) steel 10 206 370 245 M22×1,5 EN286-2 4.5
030363609 C (2+1+1 = 4 ports) steel 15 206 530 405 M22×1,5 EN286-2 6.3
030350509 C (2+1+1 = 4 ports) steel 20 206 690 565 M22×1,5 EN286-2 7.75
030350609 C (2+1+1 = 4 ports) steel 20 246 500 361 M22×1,5 EN286-2 7.5
030351509 C (2+1+1 = 4 ports) steel 40 246 940 773 M22×1,5 EN286-2 12.8
030351209 C (2+1+1 = 4 ports) steel 40 276 760 605 M22×1,5 EN286-2 12.4
030362009 C (2+1+1 = 4 ports) steel 40 310 620 405 M22×1,5 EN286-2 14.5
030351809 C (2+1+1 = 4 ports) steel 60 246 1352 1185 M22×1,5 EN286-2 18.5
030351609 C (2+1+1 = 4 ports) steel 60 276 1110 949 M22×1,5 EN286-2 17.5
030360809 C (2+1+1 = 4 ports) steel 60 310 895 712 M22×1,5 EN286-2 17.8
030351709 C (2+1+1 = 4 ports) steel 60 396 580 333 M22×1,5 EN286-2 18.5
030352009 C (2+1+1 = 4 ports) steel 80 396 750 503 M22×1,5 EN286-2 22.9
030352209 C (2+1+1 = 4 ports) steel 100 396 915 706 M22×1,5 EN286-2 27.4
030352009 030352209
Air tanks
Diameter
number
(mm)
Note
Type
Part
H
R
P
L
J
030406005 V-shaped 206 103 80 30 218 265 255 275 -
U bolt M8 / 1 support /
030406009 Italian V-shaped 310 155 82 30 45 45 357 382 -
2 flat washers
U bolt M8 / 1 support /
030406008 Italian V-shaped 396 198 80 30 45 45 444 465 -
2 flat washers
0307031000 foldable strap 310 - 200 100 11×16 11×16 - - 335 kit of 2
0307039600 foldable strap 396 - 250 125 11×16 11×16 - - 420 kit of 2
030406003 032200001S
Air tanks
Standard
Foldable strap
Air coils 20
Air coils
Air coils with plastic colour-coded tails satisfy DIN74323 safety parameters as tested by TÜV. The coils have been tested
to 10,000 articulations (ISO 7375). The tube has been approved in accordance with DIN 74324 (black) or DIN 73378
(colour).
B B B
D E D FD E EG F F H G G H H
Female swivel Female fixed
Female
Male
Female
swivel
removable
swivel
FemaleFemale
fixed
Malefixed
Male
fix removable
MaleMale
removable
fix long
Male fixMale fix Male fixMale
longfix long
m18x1,5 m18x1,5 m18x1,5 mm18x1,5
16x1,5 m18x1,5 m16 x 1,5m 16x1,5
m18x1,5 m m18 x 1,5
16x1,5 m16 x 1,5
m16 x 1,5 m18 x 1,5 m18 x 1,5
length (m)
Thread 1
Thread 2
Working
Material
A colour
material
number
Hanger
C (mm)
Fitting
colour
Part
Coil
0701112223131 PA12 PHL black black 12×9 94 4 G H iron zinc plated c/w
0702112321331 PA12 PHL red black 12×9 105 4 G H iron zinc plated c/w
0702112331331 PA12 PHL red black 12×9 105 6 G H iron zinc plated c/w
0703112321331 PA12 PHL yellow black 12×9 105 4 G H iron zinc plated c/w
0703112331331 PA12 PHL yellow black 12×9 105 6 G H iron zinc plated c/w
033016009 PA12 HIPHL black yellow 12×9 105 4 D D iron zinc plated c/w
033016509 PA12 HIPHL black red 12×9 105 4 D D iron zinc plated c/w
M16×1.5
0702212445522 PA12 HIPHL red red - 115 4.72 F18×1.5 - w/o
L15MM
M16×1.5
0703312445522 PA12 HIPHL yellow yellow - 115 4.72 F18×1.5 - w/o
L15MM
tube ∅:
032DMM96050 - - - - - - M16M steel -
12mm
Minimum
Diam ext
Quantity
Working
Diam int
pressure
Material
bending
number
(m/roll)
Colour
radius
Norm
(mm)
(mm)
(mm)
(mm)
(bar)
Part
(m)
radius (mm)
Coil length
Thickness
Minimum
Diam ext
Quantity
Working
Diam int
pressure
Material
bending
number
(m/roll)
Colour
Norm
(mm)
(mm)
(mm)
(bar)
Part
(m)
0670410110 black PA12 HIPHL 4 2 1 20 49 25 DIN74324 25
radius (mm)
Coil length
Thickness
Minimum
Diam ext
Quantity
Working
Diam int
pressure
Material
bending
number
(m/roll)
Colour
Norm
(mm)
(mm)
(mm)
(bar)
Part
(m)
0670610141 blue PA12 HIPHL 6 4 1 35 29 100 DIN73378 100
0670810141
Minimum bending
Working pressure
Quantity (m/roll)
Thickness (mm)
Diam ext (mm)
radius (mm)
Category
Material
Colour
Norm
(bar)
0670610119 black PA1012 PHL 6 4 1 35 29 1300 ISO 7628 2 1300
0671515117 black PA1012 PHL 15 12 1.5 100 16 250 ISO 7628 2 250
0670610119
Minimum bending
Working pressure
Quantity (m/roll)
Thickness (mm)
Diam ext (mm)
radius (mm)
Category
Material
Colour
Norm
(bar)
067008010131H red PA1012 PHLY 8 6 1 40 26 850 ISO 7628 3 850
067008010131H 067008010141H
FITTINGS
Bulkhead union 45
Bulkhead elbow 49
Accessories 50
RTC fittings
RTC fittings offer the highest standards in safety, quality and reliability. They have been designed for use with 11/12
polyamide (Rilsan) or elastomeric polyester (Hytrel) tubing in the pneumatic circuits of truck and trailer auxiliary and
braking systems. RTC is a ready-to-use safety fitting: simply insert the tubing by hand into the fitting. Estimated assembly
time is 70-80 percent faster than for traditional cutting ring fittings.
Tube ∅ C H L1 L2 CH CH1
Part number Type M
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
03280327400- adjustable
8×6 M22×1.5 8 20.5 48.5 32.5 26 28 28 c/w
RTC tee stud
03282026400- adjustable
8×6 M16×1.5 8 20.5 28.5 31 26 15 22 w/o
RTC tee stud
03282097600- adjustable
12×9 M22×1.5 8 25 36 32.5 32 18 28 w/o
RTC tee stud
03282397600- adjustable
12×9 M22×1.5 8 25 52 32.5 32.5 28 28 c/w
RTC tee stud
Fittings
03283024400- adjustable
8×6 M12×1.5 8 20.5 30 26 - 15 17 w/o
RTC tee stud
03283026400- adjustable
8×6 M16×1.5 8 20.5 31 26 - 15 22 w/o
RTC tee stud
adjustable
318058001-RTC 12×9 M16×1.5 8 25 52 31 31 22 22 c/w
tee stud
03282026400-RTC 03283024400-RTC
Tube ∅ CH
Part number Type M B (mm) H (mm) L (mm) Type
(mm) (mm)
Type A Type B
Tube ∅ C H L L1 L2 CH
Part number Type M
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
Fittings
03285060400-RTC union 10×8 - - 24 50.6 - - -
Push-in fittings
Push-in fittings have been designed for use with 11/12 polyamide (Rilsan) or elastomeric polyester (Hytrel) tubing in the
pneumatic circuits of truck and trailer auxiliary and braking systems. Push-in fittings are ready-to-use safety fittings that
do not require additional tools or equipment for installation. Simply insert the tubing into the fitting. Estimated assem-
bly time is 70-80 percent faster than for traditional cutting ring fittings.
›› The tubing tolerance used complies with ISO standard 7628 and DIN standard 74324/73378
›› The operating heat range of the design mix specifically for the O-Ring fitting is +100°C / -40°C
›› The seal under these conditions is ensured by a design mix specifically for the O-Ring
Fittings
CH (mm)
number
D (mm)
H (mm)
Tube ∅
B (mm)
L (mm)
(mm)
Note
Type
Part
CH (mm)
number
D (mm)
H (mm)
Tube ∅
B (mm)
L (mm)
(mm)
Note
Type
Part
M
03280086000 straight terminal 12×8 16×1.5 8.5 22 25 29.5 22 male
Tube ∅
Part number Type B (mm) F (mm) H (mm) L (mm) CH (mm) Note
(mm)
Fittings
Straight female terminal
032660B01/
swivel 1/4 GAS - 6 - - 20 5.5
4GAS000
03266B001/
swivel 1/8 GAS - 7 - - 20 5.5
8GAS000
032660xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
number
Tube ∅
F (mm)
L (mm)
(mm)
Type
Part
M
03281514400 swivel stud 6×4 12×1.5 12×1.5 32 31.5 42.5 32.5 8 19 18
03281524400 swivel stud 8×6 12×1.5 12×1.5 32.5 31.5 43.5 32.5 8 19 18
Fittings
03281597600 swivel stud 12×9 22×1.5 16×1.5 36 33 50 36.5 9 22 29
032815117600 swivel stud 16×12 22×1.5 16×1.5 39.5 34.5 53.5 36.5 9 22 29
swivel stud
03282696600 12×9 16×1.5 16×1.5 50 35.5 8.5 48.5 - 22 22
c/w test point
032826xxxx
032815xxxx
032845xxxx
032810xxxxx 032820xxxx
Fittings
03283027400 pivoted stud 8×6 22×1.5 12×1.5 41 34 10 17 28
032830xxxx 032840xxxx
pivoted
03284396600 12×9 16×1.5 16×1.5 50 36 10 35 38 36.5 22 16
stud
03282196600 pivoted stud c/w test point 12×9 16×1.5 16×1.5 47 36 45.5 10 22 22
03282397600 pivoted stud c/w test point 12×9 22×1.5 16×1.5 47 36 45.5 10 28 22
032843xxxx 032821xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
number
F (mm)
L (mm)
Type
Part
M
03271001400 pivoted adaptor 10×1 12×1.5 31.5 9 15.5 17 14
Fittings
03271007600 pivoted adaptor 22×1.5 16×1.5 36 10 17.5 22 28
032710xxxx 032720xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
L5 (mm)
number
F (mm)
L (mm)
Type
Part
M
03274006600 pivoted adaptor 16×1.5 16×1.5 37 10 19 38 35 20 22 22
032740xxxx 032741xxxx
032742xxxx 032743xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
number
F (mm)
L (mm)
Type
Part
M
03271506600 pivoted adaptor threaded 16×1.5 16×1.5 20.5 35.5 8.5 22 22
Fittings
03273507600 pivoted adaptor threaded 22×1.5 16×1.5 20.5 36.5 9 22 29
032715xxxx 032725xxxx
032735xxxx 032746xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
L4 (mm)
L5 (mm)
number
F (mm)
L (mm)
Type
Part
M
03274904600 pivoted adaptor threaded 12×1.5 16×1.5 20.5 35 8 35 40 20 20 16
03274906600 pivoted adaptor threaded 16×1.5 16×1.5 20.5 35.5 8.5 35 40.5 20 22 16
03275106600 pivoted adaptor threaded 16×1.5 16×1.5 20.5 35.5 8.5 35 40.5 20 22 16
032749xxxx 032751xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
number
F (mm)
L (mm)
Type
Part
Fittings
03287010400 bulkhead union 12×1.5 44 42.5 18 19
032880xxxx
032850xxxx
032870xxxx
CH1 (mm)
CH2 (mm)
CH3 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
number
D (mm)
Tube ∅
F (mm)
L (mm)
(mm)
Type
Part
M
stud bulkhead
03280326400 8×6 16×1.5 19 12×1.5 60.5 9 15 45.5 22 24 18
terminal
stud bulkhead
03280327400 8×6 22×1.5 19 12×1.5 60.5 9 15 45.5 28 24 18
terminal
stud bulkhead
03280367400 10×8 22×1.5 19 12×1.5 63.5 9 15 48.5 28 24 20
terminal
stud bulkhead
03280396600 12×9 16×1.5 23 16×1.5 69.5 8.5 16 53.5 28 28 22
terminal
stud bulkhead
03280397600 12×9 22×1.5 23 16×1.5 68.5 9 15 53.5 28 28 22
terminal
032803xxxx
CH1 (mm)
CH2 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
number
F (mm)
L (mm)
Type
Part
M
threaded adaptor
0327500600 - 16×1,5 22 20.5 - - 22 22
bulkhead
threaded adaptor
0327500700 - 22×1,5 26 27.5 - - 28 16
bulkhead
threaded adaptor
0327600400 - 12×1,5 22 18 - - 18 19
bulkhead
threaded adaptor
Fittings
0327600600 - 16×1,5 22 20.5 - - 22 22
bulkhead
threaded adaptor
0327700400 - 12×1,5 22 18 - - 18 19
bulkhead
threaded adaptor
0327700500 - 16×1,5 22 20.5 - - 22 22
bulkhead
threaded adaptor
0327700700 - 22×1,5 26 27.5 - - 28 16
bulkhead
threaded adaptor
0327800500 - 16×1,5 22 20.5 - - 22 22
bulkhead
threaded adaptor
03276307600 22×1,5 16×1,5 20.5 24 44 - 22 28
bulkhead
threaded adaptor
032703076100ML 22×1,5 10×1 35 9 20 6 28 22
bulkhead
threaded adaptor
032703069400ML 16×1,5 12×1,5 35 9 20 6 22 24
bulkhead
threaded adaptor
032703079400ML 22×1,5 12×1,5 35 9 20 6 28 24
bulkhead
threaded adaptor
032703077600ML 22×1,5 16×1,5 39 9 24 6 28 28
bulkhead
032750xxxx 032770xxxx
032760xxxx
032703xxxx
032780xxxx 032763xxxx
CH1 (mm)
CH2 (mm)
CH3 (mm)
CH (mm)
L1 (mm)
L2 (mm)
L3 (mm)
number
F (mm)
L (mm)
Note
Type
Part
M
bulkhead
03276306600 16×1.5 16×1.5 20.5 37 56 10 - 22 22 22 male - female, 90°
elbow
bulkhead ∅ 13mm,
032697176 16×1.5 - 54.5 38 8.5 - 22 - - -
elbow male - female, 90°
bulkhead ∅ 13mm,
032697177 22×1.5 - 51 35 10 - 28 - - -
elbow male - female, 90°
Fittings
032763xxxx 032697xxxx
CH (mm)
L1 (mm)
number
H (mm)
F (mm)
L (mm)
Note
Type
Part
M
03269200600 accessories - 16×1.5 - - - 22 test point 7.5
03269504000 accessories - - - 9 - 18 -
Type A Type B
Fittings
032692xxxx
032695xxxx
032698xxxx
Brazil Poland
Haldex do Brasil Ind. E Com. Haldex Sp. z.o.o.
Ltda Praszka
São José dos Campos Tel.: +48 34 350 11 00
Tel.: +55 12 3935 4000 Fax: +48 34 350 11 11
Fax: +55 12 3935 4018 E-Mail: info.pl@haldex.com
E-Mail: info.brasil@haldex.com
Russia
Canada OOO “Haldex RUS”
Haldex Ltd Moscow
Cambridge, Ontario Tel.: +7 495 747 59 56
Tel.: +1 519 621 6722 Fax: +7 495 786 39 70
Fax: +1 519 621 3924 E-Mail: info.ru@haldex.com
E-Mail: info.ca@haldex.com
Spain
China Haldex España S.A.
Haldex Vehicle Products Co. Ltd. Granollers
Suzhou Tel.: + 34 93 84 07 239
Tel.: +86 512 8885 5301 Fax: + 34 93 84 91 218
Fax: +86 512 8765 6066 E-Mail: info.es@haldex.com
E-Mail: info.cn@haldex.com
Sweden
France Haldex Brake Products AB
Haldex Europe SAS Landskrona
Weyersheim Tel.: +46 418 47 60 00
Tel.: +33 3 88 68 22 00 Fax: +46 418 47 60 01
Fax: +33 3 88 68 22 09 E-Mail: info.se@haldex.com
E-Mail: info.eur@haldex.com
United Kingdom
Germany Haldex Ltd.
Haldex Brake Products GmbH Newton Aycliffe
Heidelberg Tel.: +44 1325 310 110
Tel.: +49 6 221 7030 Fax: +44 1325 311 834
Fax: +49 6 221 703400 E-Mail: info.gbay@haldex.com
E-Mail: info.de@haldex.com
Haldex Brake Products Ltd.
Hungary MIRA Technology Park
Haldex Hungary Kft Tel: +44 2476 400 300
Szentlörinckáta Fax: +44 2476 400 301
Tel.: +36 29 631 400 E-Mail: info.gbre@haldex.com
Fax: +36 29 631 401
E-Mail: info.hu.eu@haldex.com USA
Haldex Brake Products Corp.
India Kansas City
©2016, Haldex AB. This material may contain Haldex India Private limited Tel.: +1 816 891 2470
Haldex trademarks and third party trademarks, Nashik Fax: +1 816 891 9447
Tel.: +91 253 66 99 501 E-Mail: info.us@haldex.com
006 700 073_EN /03.16/Haldex EUR