Professional Documents
Culture Documents
Multisim Activity 3 BXX LastName FirstName Copy 040546
Multisim Activity 3 BXX LastName FirstName Copy 040546
Multisim Activity 3 BXX LastName FirstName Copy 040546
University
COLLEGE OF ENGINEERING
Electrical Engineering Department
ACE 225 – Programming for EE Applications
Computer Laboratory Activity Manual
Class
Number: Activity No. 03
B05 MULTISIM: Dependent Power Sources (Set B)
Name: Last Name, Given Name MI. Year & Section: BSEE 2B
Schedule & Room: 7:30 – 9:00 MW SELB 204 Group Set: Select group set
Instructor: Engr. Rue Lei A. Balicaco Date Performed: 1 January 2024
I. OBJECTIVE
II. PROCEDURE
A. PROBE SETTING
3. Place the necessary components and connect them according to the circuit shown in
Figure 3.1 and change their labels accordingly.
Figure 3.1
4. Change the values of the components as follows:
Value
Component
Set B1 Set B2 Set B3 Set B4
E1 250 V 240 V 230 V 220 V
R1 13 Ω
R2 6Ω
R3 8Ω
R4 24 Ω
R5 2Ω
R6 18 Ω
α 5
10. Record the voltage and current readings in the table below:
Nodes Node Voltages
a Va = V
b Vb = V
c Vc = V
d Vd = V
11. Attach a screenshot of the circuit together with the probe readings. Make sure that the
probe readings don’t overlap each other or any part of the circuit.
13. Place the necessary components and connect them according to the circuit shown in
Figure 3.2 and change their labels accordingly.
Figure 3.2
14. Change the values of the components as follows:
Value
Component
Set B1 Set B2 Set B3 Set B4
E1 250 V 240 V 230 V 220 V
IA 10 A 9A 8A 7A
R1 5Ω
R2 7Ω
R3 24 Ω
R4 6Ω
R5 3Ω
β 1.1
R1 I1 = A
R2 I2 = A
R3 I3 = A
R4 I4 = A
R5 I5 = A
18. Attach a screenshot of the circuit together with the probe readings. Make sure that the
probe readings don’t overlap each other or any part of the circuit.
20. Place the necessary components and connect them according to the circuit shown in
Figure 3.3 and change their labels accordingly.
Figure 3.3
21. Change the values of the components as follows:
Value
Component
Set B1 Set B2 Set B3 Set B4
E1 250 V 240 V 230 V 220 V
IA 10 A 9A 8A 7A
R1 2Ω
R2 3Ω
R3 4Ω
R4 25 Ω
R5 7Ω
η 1.3
R3 I3 = A
R4 I4 = A
R5 I5 = A
25. Attach a screenshot of the circuit together with the probe readings. Make sure that the
probe readings don’t overlap each other or any part of the circuit.
27. Place the necessary components and connect them according to the circuit shown in
Figure 3.4 and change their labels accordingly.
Figure 3.4
28. Change the values of the components as follows:
Value
Component
Set B1 Set B2 Set B3 Set B4
E1 250 V 240 V 230 V 220 V
E2 260 V 250 V 240 V 230 V
R1 1Ω
R2 4Ω
R3 18 Ω
R4 5Ω
R5 2Ω
ρ 0.83
R3 I3 = A
R4 I4 = A
R5 I5 = A
32. Attach a screenshot of the circuit together with the probe readings. Make sure that the
probe readings don’t overlap each other or any part of the circuit.