Professional Documents
Culture Documents
Pioneer Catalogs 1976 77 Cat Us
Pioneer Catalogs 1976 77 Cat Us
No. 12
STffiffiffi# ffiffi*=IVEHS
.Walnut veneered top and side panels are used in the construction
of this cabinet.
ffiwreffiffiffi
AM/FM STEREO RECEIVER
Continuous power output of 120 watts* per chan-
nel, min. RMS at 8 ohms or 170 watts* per chan-
nel at 4 ohms from 20 Hertz to 20,000 Hertz
with no more than O.1% total harmonic distortion.
FM Sensitivity: Mono; 10.3dBf (1.8pV) FM Capture Ratio: ffiWtrffiffi AM/FM srEREo REcEtvER
1.0d8 FM Alternate Channel Selectivity: BOdB FM S/N Ratio Continuous power output of 50 watts* per chan-
(at 65dBf): 78dB (mono), 73dB (stereo) tnput: 2 turntables, nel, min. RMS at 8 ohms or 60 watts* per chan-
2 lape decks, 1 auxiliary source, 2 microphones Output: 3 nel at 4 ohms from 20 Hertz to 20,000 Hertz
pairs of speaker systems, 1 set of headphones Dimensions:
203/a" (WlX6tt/''u" (H)X177/e" (D) Weight: 51 lb. 8oz. with no more than O.1% tctal harmonic distortion.
FM Sensitivity (lHF): Mono; 1O.7dBf (1.9pV) FM S/N Ratio (at
.Walnut veneered top and side panels are
used in the construction of ihis cabinet. 65dBf): 72dB (mono), 67dB (stereo) Dimensions-- 16zs/rr,(W\X
*Measured pursuant to the Federal Trade Commission's Trade s'1/B' (H)x 1 41 e/sz" ( D) Weight: 30 l b. 3 oz.
*Walnut grained vinyl top
Regulation Rule on Power Output Claims for Amplifiers. and side panels are used an the construction of this cabinet.
STEREO TUNERS & AMPLIFIERS
STEREO
nel, min. RMS at 8 ohms or 35 watts* per chan- FM Sensitivity (lHD: 1.5pV FM Capture Ratio (lHfl: 1dB
nel at 4 ohms from 20 Hertz to 20,000 Hertz FM Alternate Channel Selectivity: BSdB (1400kH2), 55dB
(i300kHz) Stereo Separation:35dB (SO-10,000H2) FM S/N
with no more than O.3% total harmonic distortion. Ratio:80dB (mono), 75dB (stereo) Dimensions: 16t%2"(W)X
FM Sensitivity (lHF): Mono; 1O.7dBf (1.9pV) FM S/N Ratio (at
65dBf): TOdB (mono), 65dB (stereo) Dimensions: 182%2,,(W)X 5zy"r" (H)X14%" (D) Weight: 2Olb. 1 oz.
5%'(H)x141Ysz" (D) Weight: 28.1b. 14oz "Walnut veneered top and side panels are used in the.construction of this cabinet.
"Walnut grained vinyl top and side panels are used in the constructionof this cabinet.
ffiWffi$ffiffi
AM/FM srEREo REcEtvER
Continuous power output ol 20 watts* per chan-
T)(-7500 *Wooden case is optional.
"walnut veneered top and side panels are used in the construction of this cabinet. "Walnut veneered top and side panels are used in the construction of this cabinet
*:;
r{.,ii.'tf.:*"",,* ?'t' fil"lf, .1ii; 1i;;
{$* {r*,"",'g ii$l*.s lt il..irjj i'{li.l
FULL.AUTO BELT DRIVE TURNTABLE AUTO.RETURN BEtr DRIVE BELT DRIVE TURNTABLE
Motor: 4-pole synch ronous motor S peeds: TURNTABLE M otor: 4-pole synch ronous motor S peeds:
33%, 45 rpm Wow and Flutter: O.O7% Motor: 4-pole synch ronous motor Speeds: 33%, 45 rpm Wow and Flutter: O.O7%
(WRMS) Signal-to-Noise Ratio: 63dB 33%, 45 rpm Wow and Flutter: O.O7o/o (WRMS) Signal-to'Noise Ratio: 63dB
(Ottrt B) Tonearm: Static-balance type (WRMS) Signal-to-lloise Ratio: 63dB (Otru B) Tonearm: Static-balance type
S-shaped pipe arm Usable Cartridge (Ollt B) Tonearm: rstatic-balance type S-shaped pipe arm Usable Cartridge
Weight: 4g (min.) to 109 (max.) Dimen- S-shaped pipe arm Usable Cartridge Weight: 4g (min.) to 109(max.) Dimen-
sions: 175Aa" (W) x 6%" (H) x 14%" (D) Weight: 4g (min.) to 109 (max.) Dimen- sions: 175Aa" (W) x 6%" (H) x 14%" (D)
Weight: 15|b. 6oz. sions: 175Aa" (W) x 6%"(H) x 14%"(D\ Weight: 13lb.2oz.
Weight: 171b. 10o2.
"Walnut grained vinyl cabinet. "Walnut grained vinyl crtbinet. "Walnut grained vinyl cabinet.
#Kffiffiffi# ffiffi&*Fffi*ruffiffi
ffi&*Fh€#ru ffis
h€
e*ffiffiss#ffi ffis
$
ffiffi
kkeffi&
e€#Sbffi
M@@
tu#Wes8
&R
mm*@ffiffi turuffiru$wffiffi xffi J ffi-*S
STEREO HEADPHONES STEREO HEADPHONES STEREO HEADPHONES Y.TYPE EXTENSION CORD
Frequency Range: 20- Frequency Range: 20- Frequency Range: 20- Two-headphone capabi I ity
20,000H2 Maximum lnput 20,000H2 Maximum lnput 20,000H2 Maximum lnput when plugged into standard
Power: 500mW (each channel) Power: 500mW (each channel) Power: more than 700mW headphone jack.
Features: 2-w ay dynam ic Features: Dynam ic type, (each channel) Features:
type, Polyester f ilm diaphragm Polyester f i lm diaphragm Sliding type headband with "j#-tr1
Connection Cord: 16'5" Connection Cord: 16'S" the locking device. HEADPHONE JUNCTION
Weight: 1 1 |b. 8oz. (without Weight: 1lb. 1oz. (without Connection Cord: 16'5" BOX
connection cord) connection c'ord) Weight: 1lb. 3oz. (without ldeal if you're lacking a
*Leather-like vinyl head band, ear "Leather-like vinyl head band, ear connection cord) headphone jack.
pads and ear cups are used in pads and ear cups are used in "Leather-like vinyl ear pads are
the construction of these the construction of these used in the construction of these
headphones. headphones. headphones.
4.CHANNEL STEREO COMPONENTS
3-iiq i94Fj
jEi.d.tl;F
3;i /, :Eerfi{j
.d;i
l!.L ,Ltlq:; dI i,"dl
4-CHANNEL AM/FM STEREO RECEIVER FRONT.ACCESS STEREO CASSETTE DECK WITH DOLBY*
Continuous power output of 40 watts* (4-chan- NOISE REDUCTION SYSTEM
Type: Compact cassette tape deck, 2-channel stereo/mono
nel), 60 watts* (2-channel) per channel, min. Motor: Electronically-controlled DC motor for capstan, DC
RMS at I ohms and 50 watts* (4-channel), 75 torque motor Heads: "Ferrite Solid" recording/playback
watts* (2-channel) per channel at 4 ohms from head X1, Ferrite erasing head X1 Wow & Flutter: O.O7%
20 Hertz to 20,000 Hertz with no more than (WRMS) S/N Ratio: 63dB (Dolby on) Frequency Response:
0.3% total harmonic distortion. 2O-17,000H2 (chrome tape) Total Harmonic Distortion: No
FM Sensitivity (lHD: 1.8pV FM Alternate Channel Selectivity: more than 1.5% (0dB) Features: Automatio tape selector for
CrOz tape, Wide scale level meter, Tape counter with required
80dB FM S/N Ratio: 70dB Features: Built-in CD-4 demo-
dulator, RM & SQ full logic decoders Dimensions: 21zy"r" (W)X
memory switch for starting point Dimensiirns: 17%"(W)x
7%" (H)X123/e" (D) Weight: 2gIb.
6%0" (H)X 175/a" (D) Weight: 491b. 6 oz.
*Walnut veneered top and side panels are used in the construction
"Walnut veneered top and side panels are used in the construction of this cabinet.
of this cabinet. *Dolby is a trademark of Dolby Laboratories, lnc.
[3G-GII
4-CHANNEL PHONO CARTRIDGE
Pioneer's PC-Q1 cartridge was specially designed to repro-
duce CD-4 discrete discs. But it's ideal for stereo discs as
wellas SQ or RM discs.lt'sfrequency response extends up to
50,000 hertz so that it can pick up the whole of the signal '' 'I &*"-*'
-_. ' - _ _. . ,
from CD-4 records and reproduce the four discrete channels ' ' . *."-'" ,,.^, ,, ,.,t- ,,,,,1 t.,
accurately.
FRONT-AGCESS STEREO CASSETTE DECK WITH DOLBY
Frequency Response: 10-50,000H2 Channel Separation:
NOISE REDUCTION SYSTEM
More than 25dB (at lKHz) Output Voltage: 2.0mV (1KHz,
Type: Compact cassette tape deck, 2-channel stereo/mono
SOmm/sec.) Stylus: "parabolic" type with block diamond
Motor: Elecironically-controlled DC motor for capstan drive,
(PN-Q1 ) Recommended Stylus Pressure; 1-2.1g (CD-4: 1.89)
Weight:5.59. DC torque motor Heads: "Ferrite Solid" recording/playback
head X1, Ferrite erasing head X1 Wow & Flutter: O.O7o/o
(WRMS) S/N Ratio: 63dB (Dolby on) Frequency Response:
2O-17,000H2 (chrome tape) Total Harmonic Distortion: No
more than 1.5% Features: 2-motor drive system, Tape selector
(STD/FeCr/CrO) with automatic CrOz tape detector, Memory
stop Dimensions: 17s1" (W\X71%z(H)x13%z(D) Weight: 28 lb.
*Measured pursuant to the Federal Trade Commission's Trade
3oz.
Regulation Rule on Power Output Claims for Amplifiers.
"Walnut grained vinyl top and side panels and veneered bottom plate are used in the
construction of this cabinet.
.
"1": "
::r
"i: :::::ai
! 9r :: :::.'..:i:! :i
gi ::".'l :r:.
11::::: i: ' :r :
*Wooden case is optional
in
!1 tr;irlrr::. I
Tape Speeds:
Winding Time: Approximately 110 sec- 4-CHANNEL, 4-TRACK, 3-MOTOR, jia er;:i i:.. r.4.::::: dl
,
,,.il.j, e ' ::' CM-1 : Uni/Omni-Directional Condenser
. Jl''';' =," .it.1.
Microphone CM-2S: Unidirectional Stereo
4-CHANNEL 4-TRACK HEAD Condenser Microphone
ASSEMBLY UNIT
SPffi&Kffiffi ffiYST*N#$
:-;9 e'
o""
-'
2.TRACK, 3.MOTOR,
3.HEAD STEREO TAPE
DECK
Drive System: 3-motor drive
system Tape Speeds: 15 ips,
7%ips Wow & Flutter: O.O4%
WRMS (15 ips) S/N Ratio:
57dB Frequency Response:
3O-22,OO0Hz +3dB (15ips)
Features: 3-step bias selector,
4-step equal izerselector,pl u g-
in head assembly (4-track as-
sembly available as option),
fQ/"" vssl capability Dimen-
sions: 1B%" (W)X 17zt/"r" (H) X
91Yez"(D\ Weight: 491b. 10o2.
*Leather-like vinyl side panels and s.WAY s-SPEAKER SYSTEM
*Comes with only one reel front cover are used in the Enclosure: Acoustic suspension dual isolated chamber Speak-
construction of this cabinet. ers: 1O-inch carbon fiber blended cone woofer x2, 2/z-inch
soft-dome midrange. High polymer molecular film tweeter.
H igh polymer molecu lar f i I m su per-tweeter I mpedance: 6 oh ms
Frequency Range: 25-25,OOOHz Sensitlvity: 89dB/W/M
3-MOTOR, 3-HEAD STEREO Maximum lnput Power: 200W Crossover Frequencies: '150H2,
TAPE DECK WITH 4-CH. 7OOHz, 2,OOOHz, 5,000H2 Dimensions: 29"(W)X32"(H)x 19"
PLAYBACK HEAD (D) Weight:1241b.
Drive System: 3-motor drive *Walnut veneered cabinet with particleboard rear panel.
system Tape Speeds: 7%ips,
33/+ips Wow & Flutter: 0.08%
WRMS (7%ips) S/N Ratio:
55dB Frequency Response;
4O-ZO,OOOHz r3dB (7%ips)
Features: 3-step bias selector,
2-step equalizer selector Di-
mensions: 17%a" (W)X163/sz"
(H)X81%o"(D) Weight: 461b.
5 oz.
*Walnut veneered side panels are
used in the construction
of this cabinet.
*Comes with only one reel.
3.MOTOR,3-HEAD STEREO
TAPE DECK
Drive System: 3-motor drive
system Tape Speeds: 7%ips,
3% ips Wow & Flutter: 0.08%
WRMS (71/zipsl S/N Ratio:
55dB Frequency Response:
4O-2O,OOOHz r3dB (7%ips\
ffiffiM*%ffiffi
4-WAY 4-SPEAKER SYSTEM
Features: B i as selector. Eq ual- Enclosure: Bass reflex type Speakers: 12-inch carbon fiber
ize r se lector Dimensio ns: 1 67/a" blended cone woofer, 3154o-inch cone midrange, .12Vsz-inch
(W)x 16%" (H)x9" (D) Weight: cone tweeter. High-molecular polymer super-tweeter lmped-
411b. ance: 8 ohms Frequency Range: 30-25,000H2 Sensitivity:
*Walnut grained vinyl side 92.5d8/W/M Maximum lnput Power: 100W Crossover Fre-
panels are used in the quencies: 1,2OOHz, 4,000H2, 12,OOOHz Dimensions: 15%"(W)
construction of this cabinet. y26e/rtt (H)X15%" (D) Weight: 58 lb. 1 4 oz.
Mffiffi*@M
3-WAY 3.SPEAKER SYSTEM
Enclosure: Bass reflex type Speakers: 10-inch carbon fiber s.WAY 6.5PEAKER SYSTEM
blended cone woofer, l2Vsrinch carbon fiber blended cone Enclosure: lnf inite baffle type Speakers: 15-inch cone woofer,
tweeter. High-molecular polymer super-tweeter lmpedance: B
S-inch cone midrange, 4-inch cone midrange, multi-cellular
ohms Frequency Range: 35-25,000H2 Sensitivity: 91dBNV /
horn tweeter, dome supertweeter X2 lmpedance: 8 ohms
M Maximum lnput Power:40W Crossover Frequencies: 4,000 Frequency Range: 25-22,OOOHz Sensitivity: 97dB/W/M
Hz, 10,000H2 Dimensions: 1213Aa" (W)x22%6"(H)x 12%" (D) Maximum lnput Power: 1OOW Crossover Frequencies: 800H2,
Weight:28lb. 10o2. 2,OOOHz, 5,000 Hz, 1 0, 000 Hz Dimension s: 1 6%" (W)x2 4 t 3/
a(H)
*Walnut grained vinyl cabinet with particleboard rear panel. X1113/sz" (D) Weight: 51|b. 11o2.
*Walnut veneered cabinet and front grille with particieboard
rear panel.
mffi*wffiffiffi
3-WAY 3.SPEAKER SYSTEM
Enclosure: lnfinite baffle type
Speakers:12-inch cone
woofer, 4%-inch cone
midrange, multi-cellular horn
tweeter lmpedance: 8 ohms
Frequency Range:35-
20,000H2 Maximum lnput
Power: 60W Sensitivity:
95dB/W/M Crossover
Frequencies: 500H2, 5,000H2
Dimensions: 15" (W)X
26"(H)x 1231" (Dl Weight:
40|b. 13o2.
"Walnut grained vinyl cabinet
and walnut veneered f ront
grille with particleboard rear
Panel.
wffiffi#ffiffiw%ffiffi&
3-WAY 3-SPEAKER SYSTEM
Enclosure: Bass-reflex type Speakers: 1O-inch cone woofer,
ffim*mffiffiffi 2-inch soft dome midrange, 2-inch cone tweeter lmpedance:
3.WAY 3.SPEAKER SYSTEM 8 ohms Frequency Range: 40-20,000H2 Sensitivity: 91.5d8/
Enclosure: lnfinite baftle type W/M Maximum lnput Power: 60W Crossover Frequencies:
Speakers: 10-inch cone 7OOHz, 6,00OHz Dimensions: 13"(W) x23" (H) X 1O%"(D)
woofer, 5-inch cone midrange, Weight:301b.
3-inch cone tweeter
*Walnut grained vinyl cabinei with particleboard rear panel
lmpedance:8 ohms
Frequency Range:35-
20,000H2 Maximum lnput
Power: 50W Sensitivity:
94dB/W/M Crossover
Frequencies: 700H2, 8,000H2
Dimensions: 12%" (W)X
22%" (H)x123/4" (D) Weight:
32|b. 3oz.
"Walnut grained vinyl cabinet and
walnut finished plastic front grille
with particleboard rear panel.
ffiffi ffiffi@
kffi*ffiffiMs
3-WAY 3-SPEAKER SYSTEM
Enclosure: lnfinite baffle type
Speakers: 10-inch cone
woofer,6%-inch cone
midrange, 3-inch cone
tweeter lmpedance: 8 ohms
Frequency Range:35-
ffiffiffi#ffiffiwffiffie
2.WAY 2-SPEAKER SYSTEM
20,000H2 Maximum lnput Enclosure: Bass-reflex type Speakers: B-inch cone woofer,
Power: 40W Sensitivity: cone tweeter lmpedance: B ohms Frequency Range: 50-
92.5dB/W/M Crossover 20,000H2 Maximum lnput Power:20W Grossover Frequency:
Frequencies: 1,O0OHz, 5,000H2 Dimensions: 10%"(W)x 1B/2" (H)xg/2" (D) Weight:
7,000H2 Dimensions: 12tb.
12y2" (W)x21%"(H)x 113/a" (Dl
Weight: 26 tb. 6 oz. "Walnut grained vinyl cabinet with particleboard rear panel.
"Walnut grained vinyl cabinet and
walnut finished plastic front grille
with particleboard rear panel.