Professional Documents
Culture Documents
CV - Marius Anton Actualizat
CV - Marius Anton Actualizat
CV - Marius Anton Actualizat
WORK EXPERIENCE
Responsible for the installation of fire protection systems that sprinkle water. connect pipes, tubing and the
necessary accessories. Sprinkler system installers also test the systems for leaks.
Jones Engineering for Intel project Blue Jay. Installation the high-purity pipes on the modules that will serve
the Intel processor factory.
Participation as pipe fitter in closing of pharmaceutical reactor, dismantling the conection pipes and
installation of connecting pipe systems to avoid contamination risks
- Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe
threaders and benders.
- Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding,
brazing, cementing, soldering, and threading joints.
- Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or
welding equipment.
- Measure and mark pipes for cutting and threading.
- Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints - Plan
pipe system layout, installation, or repair according to specifications.
-Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation,
using hand and power tools.
- Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following
specifications and using hand and power tools.
- Install automatic controls used to regulate pipe systems.
- Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or
wrenches.
- Remove and replace worn components.
01/04/2020 – 15/11/2020 – Aalen, Germany
PIPE FITTER – K INDUSTRIES FOR PAPIERFABRIK PALM
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or
welding equipment
09/09/2019 – 25/02/2020
PIPE FITTER – OPTIMA - MSN
Pipe fitter for MSN in Royal V- Cut, thread, and hammer pipe to specifications, using tools such as saws,
cutting torches, and pipe threaders and benders.
- Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding,
brazing, cementing, soldering, and threading joints.
- Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or
welding equipment.
- Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing,
observation, or other methods.
- Measure and mark pipes for cutting and threading.
- Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints - Plan
pipe system layout, installation, or repair according to specifications.
- Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or
wrenches.
- Remove and replace worn components. an Lend Amsterdam
Address Amsterdam, Netherlands
01/02/2019 – 05/09/2019
PIPE FITTER – OPTIMA
Pipefitter and supervisor for: PCN in Damen-Vlissingen/ Shipyard "Neptune"/Shipyard "Reimerswaal "
- Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing,
observation, or other methods.
- Measure and mark pipes for cutting and threading.
Address Rotterdam, Netherlands
04/09/2018 – 20/12/2018
PIPEFITTER CIVIL BUILDINGS – ORAJEGROUPE
20/04/2018 – 26/06/2018
PIPE FITTER – COVEBO/ H&H/ FEEDSHEAP ROYAL VAN LENT
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps
Address Kaag, Netherlands
04/12/2017 – 04/02/2018
SUPERVISOR – J.M.R. ROMANIA S.R.L.
- Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing,
observation, or other methods.
- Measure and mark pipes for cutting and threading.
- Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders,
according to specifications.
- Prepare cost estimates for clients.
- Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
Address Axel, Netherlands
04/03/2017 – 30/10/2017
PIPE FITTER – G&F. LTD
Modifying and fitting pipes according to isometric plans, revision and demands. Delivery to beneficiaries,
and technical department to the systems pipes following the 3D plans, petrochemical industry.
Address Stockholm, Sweden
20/08/2013 – 30/12/2016
PIPE FITTER – CONSTRUCTIONE NAVALE INDUSTRIALE
Modifying and fitting pipes into position following revisions and according to demands. Coordination and
supervision of the pipe fitters formation, effective participation in the construction of pipes
Address Monfalcone, Italy
27/08/2012 – 23/11/2012
PIPE FITTER – EFINOR GRUPPEN AS
Modifying, construction and fitting pipes of thermal oil and cooling systems to the prototype vessel "Deep
Energy".
Address Floro, Norway
20/05/2013 – 10/07/2013
PIPE FITTER – KRAL INDUSTRIESERVICE GMBH
Making the pipes at the bending machine and fitting them in a refinery.
Address Duisburg, Germany
28/05/2012 – 10/08/2012
PIPE FITTER – EFINOR GRUPPEN AS
Modifying and fitting pipes into position following revisions and according to demands.Taking part in the
execution and pressing of the steam and hydraulics systems pipes
Address Havyard, Norway
04/03/2013 – 10/04/2013
PIPE FITTER – HELPMAN NORWAY AS
22/01/2010 – 30/11/2010
PIPE FITTER – CONSTRUZIONE MECCANICHE GENERALI SRL
Taking part in the execution and pressing of the steam and hydraulics systems pipes, on two cruise ships
(Queen Elisabeth Carnivale I and II).
Address Monfalcone, Italy
10/11/2011 – 23/04/2012
PIPE FITTER – MAINTENANCE NAVIRE COTE D'IVOIRE (MAN-C.I.)
Coordination and supervision of the pipe fitters formation, effective participation in the construction of
pipes and their installation on vessels of the spanish corporation Albacora.
Address Abidjan
07/03/2011 – 30/09/2011
PIPE FITTER – TEHNOSHIP CONSTRUCTING STX OSV
Modifying and fitting pipes according to isometric plans, revision and demands. Delivery to beneficiaries,
and technical department to the systems pipes following the 3D plans.
Address Tulcea, Romania
15/06/2009 – 31/12/2009
PIPE FITTER – KLEVEN MARITIME CONTRACTING AS
01/08/2003 – 31/05/2009
PIPE FITTER – DAMEN SHIPYARDS GALATI
I worked on mainframe systems installation prototype ship CO2, heavy fuel, vapor ... so
Address Galati, Romania
15/01/1999 – 15/07/2003
PIPE FITTER – METACOM SA
PPS NUMBER
19/12/2017 – CURRENT
AFSCHRIFT UIT DE BASISREGISTRATIE PERSONEN - SOFI NUMBER - NETHERLANDS
04/12/2017 – CURRENT
V.C.A. - NETHERLANDS
13/03/2017 – CURRENT
HOT WORK COURSE -SWEDEN
Reading and interpreting blueprints and specifications; making detailed sketches for pipe.
Address Galatzi, Romania Field of study Pipe fitter National classification Training Course
LANGUAGE SKILLS
Other language(s):
ITALIAN B1 B1 B1 B1 B1
Levels: A1 and A2: Basic user; B1 and B2: Independent user; C1 and C2: Proficient user
JOB-RELATED SKILLS
Job-related skills
Good knowledge of geometrical and isometric drawing. Very good eye-hand coordination.
- Imagining innovative solutions
- Identifying problems
- Inspecting equipment
- Teamwork skills
- Technical work
- Thinking logically
Supervisor
OTHER SKILLS
Other skills
Cutting openings for pipe using various hand or power tools; measuring, cutting with blades and torches,
threading, grooving, bending, soldering, brazing, welding, assembling, mitering, joining and installing pipes,
valves and fittings.
pipe fitter
Communication skills
- The ability to communicate effectively with superiors, colleagues.
- Communicating with young or old people.
- Excellent communication skills, developed through experience in shipbuilding.
- Effective listening skills.