Professional Documents
Culture Documents
smartCRT by McCoy - Presentation - FINAL - NOV30 - 2022
smartCRT by McCoy - Presentation - FINAL - NOV30 - 2022
1
General Overview
• Driller’s Display
• One or many remote Displays
• Real Time tool status and movements
• Warning when safe limits are approached
• Driller instructions – removes the requirement for
extensive Driller training and removes the failure modes
of sequence (Expertise not required)
• Remote monitoring and support from
an operator located in the office/home
Patents Pending
How It Came To Be…
smartCRT
Remote, Real-time
Remote, Real-time Machine Learning
graphical evaluation
Cloud Connectivity & Analytics
technology
Conventional CRT
• Graphic Display
• Digital representation of the actual movements of the tool
• No more need to have line of sight and assistance from a person on the floor to 5
understand the state of the tool and ensure proper set, release etc.
• Loading Display
• Load display and warning when safe load limits are approached
• Prevents damage to the tool and casing
Patents Pending
Driller’s Display Continued
Dynamic Window allows the Driller to access a variety of data for the job at hand
Dynamic Window
• Torque Tension
Graph
• MTT Screen/
Connection Status
• Driller Instruction
Screen
• Tool Manual
• Procedures 6
• Etc.
1,600,000
1,000,000
800,000
Current Loading
600,000
400,000
10,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
Torque (ft-lb)
7
Real time display and warning for combined tensions, torque, and pressure
• Prevents damage of the tool
• Programable casing / connection limitations
MTT Graph/Pass Fail for Driller Dynamic Window Options
2. Modular Design Minimal Inventory/ Spare Parts and Larger operational Range
4. Large Casing Weight Range Minimal Inventory and reduced chance of error
6. Easy-break-out feature Allows tool to be released without breaking Top Drive connection
8. 20 min rig up/down time Ease on rig up less down time at Rig
Patents Pending
Evolution of DWCRT
Improvement to Mechanical Features
11
Patents Pending
Post Job Report
• After the job is • No more Tally Books with hand • Information from Job Report • A variety of
complete a report is written notes that are difficult can be easily shared, stored reports can be
generated providing key to read, inconsistent with and evaluated to determine generated using
details of the job debatable information job KPI’s and critical metrics recoded data
12
Patents Pending
Make-up Report
13
Patents Pending
Running Report “Slip-to-Slip”
• Max. RPM
14
Patents Pending
About
Top Drive
Us Verification Report
15
Patents Pending
Patents Pending
Specialty Reports Highly Customizable Reports for Specialty Jobs
• Cementing • Etc.
Patents Pending
Remote Training
Our remote training program
includes
• Remote assembly/ disassembly
in the shop
• CRT simulator
• CRT status can be remotely
viewed for rig operations
• Rig up is only aspect that may need
interaction
• Existing CRT customers
are already experienced
with rig up/space out
Training duration
• 3 days office/shop
17
• 1 day rig remote oversight
Patents Pending
vs.
Conventional CRT
1. Real time Load display and warning when safe 1. Use of Top Drive Outputs presents common issues
load limits are approached (i.e. expired calibration or calibrated at RPM)
2. Digital representation of the actual movements of the 2. Need line of sight path to tool, often high up
tool eliminates the need for line of sight to operate in the derrick. Relies on using sight from floor hand/CRT
Technician
3. Instructions on the Display help guide the Driller 3. CRT Technician is required to provide instructions
through the steps necessary to operate the tool to the Driller
4. Post Job reports are auto-generated using recorded 4. No data is collected and no reports are provided
data. A large variety of reports are available
Conventional CRT
1. Torque/Tenison Graph provides real time combined 1. Use of Top Drive Outputs presents common issues
loading conditions and alerts Driller to not overload (i.e. expired calibration or calibrated at RPM)
both the tool or the pipe
3. Instructions on the Display help guide the Driller 3. CRT Technician is required to provide instructions
through the steps necessary to operate the tool to the Driller
4. Post Job reports are auto-generated using recorded 4. No data is collected and no reports are provided
data. A large variety of reports are available
20
Appendix
21
Specifications of 750TON smartCRT
Casing Casing API 8C Hoist Torque Set Down Flow Rate Approx.
OD (in.) ID (in.)
Size (in) Weight (ppf) (Tons) (ft-lbs) (Tons) (bbl/min) Weight (lbs.)
Patents Pending
Electronic Components
• Battery Life
• Upper Ring- 24 Days (Continuous)
Upper
• Lower Ring - 24 Days (Continuous)
Data Ring
• Can be purchased locally (common batteries are used)
• ATEX certification pending
Lower
Data Ring
23
Patents Pending
Calibration and Inspection
24
Patents Pending
Advantages
Specifications McCoy 750 Volant 750 McCoy Advantage
Rated Hoist
750 Ton 750 Ton
Capacity
Rated Torque
90,000 ft-lb 85,000 ft-lb
Capacity
Set Down Load
50 Ton 110 Ton
Capacity
High Pressure Cement Jobs are no issue with
Circulation
10,000 psi 5,000 psi our high pressure rating and can allow rotation
Pressure Limit
and reciprocation of the string with our Side Entry Swivel
Tool Length 138-147 in. 78 in. With Built in Compensator and Load Monitoring, the McCoy CRT
Provides all the necessary features in a compact and integrated tool.
Our Competition would require several tools to be threaded
Base Tool together, to achieve the functionality and end up with a much
3000 lbs. 1310 lbs.
Weight longer, heavier and more complex tool
McCoy's Modular Design allows the use of a special 5-1/2” and 7"
Casing Range 5-1/2"- 30" 8-5/8" - 30"
Gripping Assembly to accommodate a larger range of casing sizes
Covers Large Weight Small Weight Range, The Slip Design allows for maximum die travel allowing 25
Die Range
Range Specific the use of the same dies on a wide range of casing weights
Through Hole 2” 2”
Maximum Flow
1161 GPM 1161 GPM
Rate
Tool Joint
6-5/8 REG 6-5/8 REG
Connection
Patents Pending
Advantages
Specifications McCoy 750 Volant 750 McCoy Advantage
Max RPM Limited by TD Limited by TD
Allows Vertical Movement of the tool During Thread Make-up
Thread Compensator 8" N/A
To prevent Thread damage
Torque, Tension, The Built in Load Monitoring can provide much more accurate
Included Not Included
Pressure Monitoring hook load and torque during the casing jobs
Patents Pending
Modular Design
The ability to handle a wide range of mandrels (7” to 30”)
with just one tool, has several benefits:
27
Patents Pending
Space-Out
28
Patents Pending