Professional Documents
Culture Documents
Rea'd: Ibagebase 120 Ka 20A
Rea'd: Ibagebase 120 Ka 20A
FPSAD52/ ELEP03
PROBLEM SET 2
10/03/2021
1.Asystem operates at 220 kVA and 11 kv. Using these quantities as base values, find the
base current and base impedance for the system.
Given
Shase 210 EVA
Vpase kV
Rea'd
Inse: ?
Zbase
Solution:
Ibagebase 120
kV
kA 20A
Vbase
2. Using 220 kVA and 11 kV as base values, express 138 kV, 2 MVA, 60 A, and 660 N as per-unit
values
Ip.u. acdual COA
Gven Le
Vbose
220 EVA
lV
= 20 A
RAMOS, PHILIP RAICER R.
FPSAD52/ELEP03
PROBLEM SET 2
10/03/2021
(115A) (25a)
Vbae 3.125 kV
5, A single-phase transmission line supplies a reactive load at a lagging power factor. The load
draws 1.2 p.u. current at 0.6 p.u. voltage while drawing 0.5 p.u. (true) power. If the base
voltage is 20 kV and the base current is 160 A, calculate the power factor and the ohmic
value of the resistance of the load.
Given
Vp-. O.Gp- Zbase VpaseLOE
Toase 25A
Ip.u. 11p-u
Vp.u . p.u
Pp- 5pu. P- T.u.Tpu. P4
Vbase 2okV Zactual (7pu.) (2base
Ibase 16OA
(OSp-u) (125.a)
Rea ' Zactual G2.5
P.Fp.4.?
Zactual 2
Solution
P TVcos
P.F. cose
P-F-p-upu(p-u
(o 5 p
(1.2p)(0-Gp:u.
P.Fp.u. 0.G14 p-u
10 Q and 400 V,
6. The base impedance and base voltage for a given power system are
Tbose 2base
Aoov
base 40A
RAMOS, PHILIP RAICER R.
FPSAD52/ ELEPO3
PROBLEM SET 2
10/03/2021
7. The base current and base voltage of a 345-kV system are chosen to be 3000 A and 300 kV,
respectively. Determine the per-unit voltage and the base
impedance for the system.
Given e
base Lbag
base0o0A
SOkV
Vpase= 3Oo kV
3oo0 A
Vachuala 345 kV
ZbaseTooa]
Vp-y.
Zbase ?
Solution'
Vp.. Vactual
Vpase
345kV
300 kV
p-u.1.15.u.
8.If the rating of the system of Problem 2.2 is 1380 MVA, calculate the
to the base of Problem 2.2.
per-unit current referred
Given
Sactual 1330 MVA
Vochal 345 ky
Viose 3o0kV
base 3000 A
Req: Ip .u ?
Solu tien'
Ip.u. actua
Lase
400 OA
000 A
Tp-u. 1.93 p
RAMOS, PHILIP RAICER R.
FPSAD52/ELEP03
PROBLEM SET 2
10/03/2021
9. Express 100-0 impedance, a 60-A current, and a 220-V voltage as per-unit quontities referred
to the base values of Problem 2.1.
pase A4OA
Vachual
Wp-u. V,ase
belGEVA
10
pu.Op-u
10. A single-phase,10-kVA, 200-V generator has internal impedance Z, of 2Q. Using the ratings
of the generator as base values, determine the generated
per-unit voltage that is required
to produce full-load current under short-circuit conditions.
Given
Sbase O k VA Load curreut under shof cireuit
Vpase 0 O V IFL 2 base
Zbase 2 (50A)(2L) l00 V
ReqJ Let (0o V as Vackyal
V -u. Vactal
Vp.a.ll load current
Vbase
Soluion
0OV
full locd 100 V
Sbase Vp-u. O p.u
okVA
200 V
FL 50 AA