63 mm x 15 mtrs. long cotton synthetic fibre seamless circular woven jacketed, rust proof,
rubberised fabric reinforced rubber lined fire hose, bearing IS:636/1988 Type-A mark capable
of withstanding 35.7 Kg, bursting pressure binded with gunmetal/Aluminiumalloy instantaneous
type male and female coupling hearing IS: 903 mark with copper wire. The hose and coupling
shall be ISI Marked.
Non-percolating fire fighting hose, confirming burst pressure 42 Kg/om2 and Proof Pressure
22Kg/om2 as per IS: 636/1988 Type B with ISI mark size: 63 mm dia X 15 mtrs length fitted wih
gunmetal/Aluminium alloy male and female instantaneous type hose coupling 63 mm dia as per
IS: 903 with ISI mark duly bound with copper wire. Hose and Coupling shall be ISI marked.
SCOPE OF INSPECTION
Hose and couplings are with ISI Mark as mentioned in the specification.
Literature/Drawing for the offered type of product should be submitted along with the technica
bid.
4, TECHNICAL SPECIFICATON OF JET NOZZLES
Jet nozzles with branch pipes made out of gunmetal suitable for 63 mm dia fire hose with
instantaneous coupling and 16 mm dia. Nozzle orifice capable of discharging 450 Ipm at
7Kg/em2 as per 1S:903 with ISI Mark,
Nozzles shall be supplied as per following IS Standards
> Jet nozzles with branch pipe as per IS: 903.
> Fog nozzles as per IS: 952.
> Universal branch pipe as per IS: 2871.
> Foam Branch pipes as per IS: 2097.
5. TECHNICAL SPECIFICATON OF Hose Box
Hose box cabinet should be of wall mounted and made up of FRP should accommodate 2nos
of 63mmx 15mt hoses and one no. Branch Pipes. The hose box should be acrylic window
fronted double door type with two no, lock and keys. The hose box should have break glass
recess for holding the key. Hose boxes shall be painted with"Luminous Yellow’ paint as per
IS: 5.Hose Cabinet for outdoor hydrants, each equipped with 2 hoses and one jet nozzle.
Size of box: 750 mm x 600 mm x 250 mm (30” x 24” approx.)
Thickness of FRP: 25MM
6. TECHNICAL SPECIFICATON OF Hand Operated Siren (Range
1.6kms)
The shape, components, material, design and construction shall comply with IS: 6026-1970.
lshall have portable stand as per para 6.3 af IS. 6026 of IS: 6026, The Siren shag, qpprox
range of 1.6KMS. In addition to marking stipulated in para Il of IS: 6026, Purchase. OrderNo..date, performance warrantee minimum 2 years from the date of supply, manufacturers
name &inspector stamp shall be punched
7. TECHNICAL SPECIFICATON OF Wind Sock:
+ Material: Double lined Polyster cloth;
+ Size: 2ft
+ Colour: Red and White
+ Wind sock with stand.
Complete set of wind sock with double ball bearing with 6ft MS long pipelrod
8.TECHNICAL SPECIFICATION OF KG DCP FIRE EXTINGUISHER
(ISI MARK)
With ISI Mark-2171 (Latest) complete with initial charging of CO2 CARTRIDGE (200 gms) with
ISI Mark-4947 (Latest) and dry chemical powder with ISI Mark-4308 (Latest)
SPECIFICATIONS:
a. Size of filler opening (inner dia) not less than 75 mm.Length of inner container
not less than 35 cm.
b. Cap shall be of gunmetal with chromium plating.
¢. Hose shall be of braided plastic high pressure with one meter length with nozzle
of ABS Plastic.
d. All other components, design and performance, anticorrosive treatment shall be
as per 15:1271 latest.
e. Certification that every extinguisher shall be of Radiographic quality welding and
fabrication and design of vessel shall be as per IS2825,
In addition to markings stipulated in IS:2171 (latest) the following permanent
punching at the bottom ring is required.
vr Manufacturer's name
ve Year of manufacturing
pr Manufacturers serial number
vr Purchase Order No. and date.
wr Inspector Stamp.
vr The date of hydraulic rest shall also be marked, Space shall be left for
writing the dates of subsequent hydraulic test
Dry Chemical Powder filling height shall be marked on the extinguisher.
Rs
Page 21 of 12