Professional Documents
Culture Documents
Doka Slabs and Tables Props
Doka Slabs and Tables Props
Dokamatic table
Dokamatic table
9767-200-01
62 999736002 - 03/2012
The Formwork Experts
Calculation Guide Doka formwork engineering Dokamatic table
a
9767-236-01
b b
c d c
9767-226-03
9767-226-05
9767-226-01
999736002 - 03/2012 63
The Formwork Experts
Dokamatic table Calculation Guide Doka formwork engineering
9767-221-01
Options 2 and 3
9767-224-01
9767-225-01
64 999736002 - 03/2012
The Formwork Experts
Calculation Guide Doka formwork engineering Dokaflex table
Dokaflex table
Dokaflex table
9720-215-01
Dokaflex table with extra props in Dokaflex table with extra props in
Dokaflex table
mid-span mid-span and at edges
9720-325-01
9720-327-01
9720-326-01
Table format
Type of prop Max. slab thickness [cm] Max. slab thickness [cm] Max. slab thickness [cm]
[m]
Eurex 20 40 42* 45
2.50x4.00m
Eurex 30 50 55* 65
Eurex 20 30* 32* 32
2.50x5.00m
Eurex 30 35* 42* 48
Eurex 20 45 50* 55
2.00x4.00m
Eurex 30 60 70* 80
Eurex 20 37* 40* 40
2.00x5.00m
Eurex 30 46* 52* 60
*On projects with stringent quality requirements regard-
ing the finish of the soffits, attention must be paid to the
different deflections occurring at the boundaries
between the tables and areas formed with Dokaflex 1-
2-4.
999736002 - 03/2012 65
The Formwork Experts
Dokaflex Calculation Guide Doka formwork engineering
Dokaflex
Dokaflex
9797-216-01
66 999736002 - 03/2012
The Formwork Experts
Calculation Guide Doka formwork engineering Dokaflex
at least 0.75 kN/m² but no more than 1.75 kN/m² (assuming a unit weight of 25 kN/m³ for the fresh concrete). Mid-span deflection has been limited
to l/500. In the case of cavity flat-slab floors, significantly lower slab loads occur.
In the case of cavity flat-slab floors, significantly lower slab loads occur.
999736002 - 03/2012 67
The Formwork Experts