Professional Documents
Culture Documents
2nd Bill K Block
2nd Bill K Block
A. STRUCTURAL WORKS
Site Clearance, Layout and Site
1.
Mobilization.
3. Pile Works - - - -
Pile drilling work for foundation of
10 m long and following diameter
with the desired technique and
equipment in the soil bed including
Betonies as per drawing - - - -
specification and instruction of
consultant.
4. Earthwork - - - - -
7. Concreting in Foundation - - - - -
8.10 P.C.C M25 Grade Concreting Cu.m 16,230.00 6,954.81 112,876,566.30 278.35 4,517,669.17 - - 278.35 4,517,669.17
9. Form Work - - - - - - -
Form work, centering and
shuttering with standard quality
water proof ply wood for all kinds
of R.C.C. works including all
necessary propping, scaffolding,
sq m 1,054.48 28,187.52 29,723,176.09 1,483.98 1,564,822.01 - - 1,483.98 1,564,822.01
staging, supporting and necessary
hooks, screws, clamps, nuts, bolt,
etc. all complete.
10.10 HYSD Fe 500 Grade MT 154,000.00 1,263.11 194,518,940.00 53.01 8,163,605.48 - - 53.01 8,163,605.48
N. Plaster Works -
-
B. FLOORING WORK
-
3.00 Porcelian Tile Work
Q Additional Bill -
Straightening and Binding of old
1.00 existing rebar as instructed by the -
consultant
2.00 Site Clearance work -
Dismantaling of old pile by using
3.00 -
breaker
Cutting and Collection of old rebar
4.00 -
from different location of site
5.00 Scaffollding -
As per BOQ Upto date As Per Previous Bill As Per This Bill
S.No. Item Unit Remarks
Quantity Quantity Quantity Quantity
I Block
8. P.C.C for R.C.C Work -
Plain cement concrete for R.C.C shear wall, column, beam, slabs, lintels, wall
footing and all types of R.C.C works with cement, sand, and stone ballast
20mm & down with the material supplied by the owner including mixing,
laying, finishing & curing as per drawing, specification and instruction of
Consultant. All concreting work will be done by batching plant and the
concrete pump.
9. Form Work -
Form work, centering and shuttering with standard quality water proof ply
wood for all kinds of R.C.C. works including all necessary propping,
scaffolding, staging, supporting and necessary hooks, screws, clamps, nuts, sq m 28,187.52 1,483.98 1,483.98
bolt, etc. all complete.
10. Steel Reinforcement
TMT steel work with the steel supplied by the owner including straightening,
cleaning, cutting, bending with 20 SWG annealed tying wire and fixing in
position drawing, specification & instruction of the Consultant. -
TMT steel work with the steel supplied by the owner including straightening, cleaning, cutting,
10. bending with 20 SWG annealed tying wire and fixing in position drawing, specification &
instruction of the Consultant.
10.1 HYSD Fe 500 Grade
BLOCK K (between grid 26 & 37)
A Column (from lvl -14.7 to lvl --7.55)
1 Column K-C2 ( Column size 1m*1m) (5 Nos of Column) 4.050 28 80.0 8.95 716.32
16*1=16 nos of Vertical rebar of 25mm dia (Type a) a 4.454
0.450
0
16 *1=16 nos of Vertical rebar of 25mm dia (Type b)
0.450
Ring 0.10
Type 1 0.94 10 360.0 3.96 1425.60
72 nos of 10mm dia main ring
. 0.940
Type2
72 nos of 8mm dia ring 0.08
0.651
Type 3 0.08
72*2 =144 nos of 8mm dia ring 0.48 8 720.0 3.00 2160.00 `
0.940
Type 4 0.08 0.08 8 2880.0 1.10 3168.00
72*8=576 nos of 8mm dia ring 0.940
2.0 Column K-C3 ( Column size 1m*1M) (5 Nos of Column) 3.975 25 96.0 8.81 845.28
16*3=48 nos of Vertical rebar of 28mm dia (Type b) a 4.380
0.450
0.450
Ring 0.10
Type 1 0.94 10 432.0 3.96 1710.72
72*3=216 nos of 10mm dia main ring
. 0.940
Type2
72*3=216 nos of 8mm dia ring 0.08
0.651 8 432.0 2.76 1194.05
0.651
Type 3 0.08
72*3 =432 nos of 8mm dia ring 0.48 8 864.0 3.00 2592.00
0.940
Type 4 0.08 0.08 8 3456.0 1.10 3801.60
72*8=1728 nos of 8mm dia ring 0.940
2.0 Column K-C4 ( Column size 1m*1m) (2 Nos of Column) 3.975 25 32.0 8.81 281.76
16*3=48 nos of Vertical rebar of 28mm dia (Type b) a 4.380
0.450
0.450
Ring 0.10
Type 1 0.94 10 144.0 3.96 570.24
72*3=216 nos of 10mm dia main ring
. 0.940
Type2
Measurement Sheet
A Form Work of K Block Column From lvl -13.5 to Slab Lvl -7.55)
BLOCK K (between grid 26 & 37)
Measurement Sheet
PCC for RCC work (Plain cement concrete for R.C.C shear
wall, column, beam, slabs, lintels, wall footing and all types of
R.C.C works with cement, sand, and stone ballast 20mm &
8. down with the material supplied by the owner including
mixing, laying, finishing & curing as per drawing,
specification and instruction of Consultant. All concreting
work will be done by batching plant and the concrete pump.)
Along Grid A
VERTICAL OUTER
BAR(between Grid 26 to 37)
2.95
Bill No : Two
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
2.95 0.300 16 124.0 3.25 403.00
Lap for
0.600 12 165.0 0.60 99.00
(1 position)
HORIZONTAL BAR
(F) 16MM dia bar @ 200 C/C 14.274 16 74.0 14.27 1056.28
lap
3 position 0.6 16.0 222 0.60 133.20
Along Grid 37
VERTICAL OUTER
BAR(between Grid 29 to 37)
Bill No : Two
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
(1 position)
Lap for
0.600 12 114.0 0.60 68.40
(1 position)
HORIZONTAL BAR
(F) 16MM dia bar @ 200 C/C 16.884 16 74.0 16.88 1249.42
lap
1 position 0.6 16.0 74 0.60 44.40
Measurement Sheet
9.1 Formwork
BLOCK K (between grid 26 & 37)
-13500mm to -7550 mm
outer wall
Along Grid A (Between grid 2m from grid 1 24.525 5.95 145.92375
26-grid 37(column face)
Total 430.53
GWALLEK NIRMAN SEWA Pvt Ltd.
Baitadi, Nepal
Measurement Sheet
Shear wall
1 Between grid 32/37 1 4.618 0.35 5.8 9.37454
2 Between grid 29/32 1 5.407 0.35 5.8 10.97621
3 Between grid 26/29 1 8.502 0.35 5.8 17.25906
4 Between grid 24a/26 1 2 0.35 5.8 4.06
5 Between grid A/B 1 3.523 0.35 5.8 7.15169
6 Between grid B/C 1 6.003 0.35 5.8 12.18609
7 Between grid C/E 1 4.359 0.35 5.8 8.84877
Page 19 of 57
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
STIRRUPS S3
Stirrups - 10 Ø @ 100 mm C/C 0.1 0.350 10 55 2.30 126.50
0.700
STIRRUPS S5
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.350 10 63 2.30 144.90
0.700
EXTRA BARS
At junction 26
Top 5.725 20 4 5.73 22.90
At junction 29
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
At junction 32
Top 4.050 20 4 4.05 16.20
At junction 37
Top 0.3 2.385 20 5 2.685 13.42
SIDE BARS
24.500 12 4 24.500 98.00
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
EXTRA BARS
At junction 26
Top 5.725 20 5 5.73 28.63
At junction 29
Top 5.024 20 5 5.02 25.12
At junction 32
Top 4.050 20 5 4.05 20.25
At junction 37
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Top 0.3 2.385 20 5 2.685 13.42
SIDE BARS
24.500 12 4 24.500 98.00
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
0.700
EXTRA BARS
At junction 26
Top 5.725 25 4 5.73 22.90
At junction 29
Top 5.024 25 4 5.02 20.10
At junction 32
Top 4.050 20 5 4.05 20.25
At junction 37
Top 0.3 2.385 20 5 2.685 13.42
SIDE BARS
24.500 12 4 24.500 98.00
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
LONGITUDINAL BARS
STIRRUPS S5
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.350 10 135 2.30 310.50
0.700
EXTRA BARS
At junction 26
Top 5.725 20 5 5.73 28.63
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
At junction 29
Top 5.024 20 5 5.02 25.12
At junction 32
Top 4.050 20 5 4.05 20.25
At junction 37
Top 0.3 2.384 20 5 2.684 13.42
SIDE BARS
24.500 12 4 24.500 98.00
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
STIRRUPS S5
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.350 10 158 2.30 363.40
0.700
EXTRA BARS
At junction A
Top 2.110 20 2 2.41 4.82
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
0.3
Bottom
2.110 20 2 2.41 4.82
0.3
At junction B
Top 3.925 20 4 3.93 15.70
At junction C
Top 5.100 20 5 5.100 25.50
At junction E
Top 3.285 25 4 3.585 14.34
0.3
Bottom 3.285 20 2 3.585 7.17
0.3
SIDE BARS
17.122 12 2 17.122 34.24
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Top 25mm 2 nos T1 Bars 0.3 21.644 0.3 25 2 22.24 44.49
STIRRUPS S5
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.350 10 191 2.30 439.30
0.700
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
EXTRA BARS
At junction A
Top 2.110 20 3 2.41 7.23
0.3
Bottom
2.110 20 2 2.41 4.82
0.3
At junction B
Top 3.925 20 5 3.93 19.63
At junction C
Top 5.100 25 4 5.100 20.40
At junction E
Top 3.285 25 4 3.585 14.34
0.3
Bottom 3.285 20 2 3.585 7.17
0.3
SIDE BARS
17.122 12 2 17.122 34.24
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.275 10 37 1.65 61.05
0.450
STIRRUPS S5
Stirrups - 10 Ø @ 75 mm C/C 0.1 0.350 10 191 2.30 439.30
0.700
EXTRA BARS
At junction A
Top 2.110 20 3 2.41 7.23
0.3
Bottom
2.110 20 2 2.41 4.82
0.3
At junction B
Top 3.925 20 5 3.93 19.63
At junction C
Top 5.100 25 4 5.100 20.40
At junction E
Top 3.285 25 4 3.585 14.34
0.3
Bottom 3.285 20 2 3.585 7.17
0.3
SIDE BARS
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
17.122 12 2 17.122 34.24
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
(2 position))
STIRRUPS S3
Stirrups - 10 Ø @ 100 mm C/C 0.1 0.350 10 153 2.30 351.90
0.700
EXTRA BARS
At junction A
Top 2.110 20 3 2.41 7.23
0.3
Bottom
2.110 20 3 2.41 7.23
0.3
At junction B
Top 3.925 20 5 3.93 19.63
At junction C
Top 5.100 20 5 5.100 25.50
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Bottom 5.100 20 3 5.100 15.30
At junction E
Top 3.285 20 5 3.585 17.93
0.3
Bottom 3.285 20 2 3.585 7.17
0.3
SIDE BARS
17.122 12 2 17.122 34.24
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
30
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
1 Along SB2
LONGITUDINAL BARS
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
(1 position))
Bottom 25 mm 2 nos B2 Bars 1.250 25 2 1.25 2.50
(1 position))
STIRRUPS S1
Stirrups - 8 Ø @ 100 mm C/C 0.08 0.250 8 92 1.56 143.52
0.450
1 Along SB3
LONGITUDINAL BARS
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Along SB11
LONGITUDINAL BARS
Along SB12
LONGITUDINAL BARS
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
Bill No.2
Ø of Cut Total Length (m)
S.N. Description Bar Details dimensions (m) Bar,m No. Length/pc Remark
m (m) 8Ø 10Ø 12Ø 16Ø 20Ø 25Ø 28Ø 32Ø
frpm grid 29 30
Total Wt.
Ton.
Total Wt.= 5065.60 286.47 0.00 0.00 0.00 0.00 0.00 0.00 5.35
Unit wt.= 0.395 0.617 0.888 1.578 2.466 3.853 4.834 6.313
Bill no. 2
Bill no. 2
Bill no. 2
extra top
Page 49 of 57
Bill no. 2
extra top
Between grid B and C 2.425 8 9.0 2.43 21.83
bar
nos=botto
m bar nos
- top
Across grid C 2.425 8 9.0 2.43 21.83 distributio
n bar nos
Between grid C and E 2.225 8 18.0 2.23 40.05
Bill no. 2
Bill no. 2
Bill no. 2
Measurement Sheet
Projec Project :Construction Of Commercial Building of Aadar Multi Investment Company Limited.
Site : Site : Balkhu, Kathmandu
Bill No : One
S.No Description Nos Length Breadth Height Quantity Remarks
8. P.C.C for R.C.C Work
Plain cement concrete for R.C.C shear
wall, column, beam, slabs, lintels, wall
footing and all types of R.C.C works
with cement, sand, and stone ballast
20mm & down with the material
supplied by the owner including
mixing, laying, finishing & curing as
per drawing, specification and
instruction of Consultant. All
concreting work will be done by using
batching plant and the concrete pump.
Deductions
Measurement Sheet
Quantity
Sn Items Units
A Block B Block C Block D Block E Block F Block G Block H Block Total Remarks