Professional Documents
Culture Documents
Rev. Purkazi I&D Scheme Dt. 14.05.2024
Rev. Purkazi I&D Scheme Dt. 14.05.2024
FOR
Under
Swachh Bharat Mission -2.0
YEAR : 2024 – 25
EXECUTIVE ENGINEER,
EST.NO. :
Construction Division,
U.P. Jal Nigam (Urban),
Muzaffarnagar
INDEX
OFFICE OF THE EXECUTIVE ENGINEER,
CONSTRUCTION DIVISION, U.P. JAL NIGAM (URBAN)
MUZAFFARNAGAR
INDEX
2 PROJECT REPORT 8 32
3 FINANCIAL STATEMENT 33 44
4 TECHNICAL STATEMENT 45 68
5 ESTIMATES CIVIL 69 93
9 DRAWINGS
SALIENT FEATURE
1
OFFICE OF THE EXECUTIVE ENGINEER,
CONSTRUCTION DIVISION, U.P. JAL NIGAM (URBAN)
MUZAFFARNAGAR
SALIENT FEATURES
2
The Purkazi has been divided into two Zones viz. - Core Sanitation Zone and Outskirts Zone
on the basis of topographical and geographical features. Zone wise population and coverage of
ward are given below.
Zone Population
Sewerage Zone Ward covered
No. 2026 2041 2056
Core Sanitation
1 7, 8, 9,10,13, & 14 18617 24780 32982
Zone
2 Outskirts Zone 1,2,3,4,5,6,11,12, & 15 18617 24779 32981
6. Sewerage Generation
6.1 EXISTING DRAINAGE SYSTEM: -
There are 4 Nallas/ drains in Purkazi Town. Abatement of pollution in town by discharge of
untreated wastewater into different Drains of Purkazi in Natural Drain. Mainly there are 2
main Nallas near STP site that ultimately polluting Town. Moahalla Jataan Drain & Bazaar
Khurd drain are merged into Idgah Road drain, futher Sufi wala drain & Gaushala drain are
merged into Khera Road Gaushala drain and ultimately reaching to the nearby pond.
3
6.3 Capacity of STP cum FSTP: -
Sl. No. Description Year 2026 Year 2041 Year 2056
As per the prevailing guidelines of SBM 2.0, the STP will be designed for 70% of base
year’s flow i.e. 70% x 4.02 = 2.81 MLD say 2.85 MLD. Hence, the capacity of Sewage
Treatment Plant considered for the design and estimation is 2.85 MLD.
4
ii) RCC Manhole Size:
i) 1500 mm Dia = 12 Nos.
One sewage treatment plant with co-treatment facilities for faecal sludge is proposed to be
constructed for the treatment of wastewater and septage. Since STP is constructed in modules
and considering the large capital investment; the capacity of STPs is decided based on
prevailing guidelines.
The capacity of STP as per drain discharge - 2.80 MLD Capacity
Capacity of STP as per population project - 4.02 MLD (2026)
- 5.35 MLD (2041)
- 7.12 MLD (2056)
As per the guidelines of SBM 2.0, the STP will be designed for 70% of base year’s flow i.e.
70% x 4.02 = 2.81 MLD say 2.85 MLD. Hence, the capacity of Sewage Treatment Plant
considered for the design and estimation is 2.85 MLD.
As per the prevailing guidelines and considering the availability of land Extended Aeration
Technology is best suited hence the same has been adopted for this project.
5
7.7 Cesspool Tanker - 1 No.
After treatment, 350 mm dia & 60 m length of gravity main has been proposed in this DPR to
discharge the treated water in to the existing Pond.
6
8. General Abstract of Cost-
Sl. Description of work Quantities Estimated Cost Rs. Lakh
No.
Civil E&M Total Rs.
Works Works (in lacs)
1 2 3 4 5 6
7
PROJECT REPORT
8
OFFICE OF THE EXECUTIVE ENGINEER,
CONSTRUCTION DIVISION, U.P. JAL NIGAM (URBAN) MUZAFFARNAGAR
PROJECT REPORT
2.0 INTRODUCTION:
The Sustainable Development Goals (SDGs) place significant emphasis on sanitation,
cleanliness and hygiene. There is evidence globally that better sanitation, hygiene and
cleanliness helps in effective control of various vector borne diseases, parasite infections and
nutritional deficiencies. There have been studies linking cleanliness and hygiene with
reduction in respiratory disorders, gastrointestinal diseases (especially diarrhoea),
psychological issues and allergic conditions.
Need for SBM-U 2.0 NSSO had undertaken an impartial assessment of the Mission in 2018.
In its report of the 76th Round (with theme of Drinking Water, Sanitation, Hygiene and
Housing Conditions of India: July – December 2018), the study found that 98% of toilets are
being used in urban areas. Further, NITI Aayog has evaluated various Centrally Sponsored
Schemes, including SBM-U, in its report dated 18th January 2021. Its recommendations
include the following:
a) need for continued investment in IHHLs and CT/PTs;
9
b) need for focusing on entire sanitation value chain for inclusive sanitation, which also
includes collection, containment, treatment, disposal and recycling of faecal waste and waste
water;
c) need for managing different types of solid wastes (including plastic, C&D and sanitary
waste);
d) need for budgetary support for disposal of legacy waste, management of plastic waste,
C&D waste.
The above recommendations suggest, inter alia, the need for Mission to continue. Moreover,
the achievements under SBM Urban need to be sustained in the long run with creation of
adequate infrastructure, and their implementation needs to be accelerated manifold.
Hence, SBM-U 2.0 is needed, with the following areas of focus:
● To achieve the vision of a “Garbage Free” Urban India, more focus is required to be given
to issues such as source segregation, collection & transportation, and processing, including
effective management of Construction & Demolition waste, plastic waste management
including reduction in single use plastic, and remediating all legacy dumpsites;
● To sustain the ODF status and prevent slippage, there is a need to ensure that all fecal
sludge and waste(used) water are safely contained, transported, processed and disposed off,
so that no untreated faecal sludge or used water pollutes the ground or water bodies;
● intensified focus is required to be given to IEC and behaviour change through citizen
outreach and jan-andolan, as well as capacity building and skilling of all relevant
stakeholders, towards achieving the Mission‟s objectives
Mission : Overall Vision, and Specific Objectives SBM-U 2.0 will be implemented with a
vision of achieving “Garbage Free” status for all cities. This will involve the following:
● all households and premises segregate their waste into “wet waste” (from kitchen and
gardens) and “dry waste” (including paper, glass, plastic, and domestic hazardous waste and
sanitary waste wrapped separately);
● 100% door to door collection of segregated waste from each household/ premise;
● 100% scientific management of all fractions of waste, including safe disposal in scientific
landfills;
● all legacy dumpsites remediated and converted into green zones;
● all used water including fecal sludge, especially in smaller cities are safely contained,
transported, processed and disposed so that no untreated fecal sludge and used water pollutes
the ground or water bodies.
10
In order to achieve this vision, the following specific objectives are targeted to be achieved:
In order to achieve this vision, the following specific objectives are targeted to be achieved:
a) Sustainable Solid Waste Management
i. ensuring cleanliness and hygiene in public places to make all cities clean and garbage
free, with 100% scientific processing of MSW;
ii. reducing air pollution arising out of SWM activities;
iii. phased reduction in use of single-use plastic.
b) Sustainable Sanitation and treatment of used water
i. holistic Sanitation, with end-to end solutions (from discharge, containment,
evacuation, transportation to safe disposal of all effluents from toilets);
ii. treatment of used water1 before discharge into water bodies, and maximum reuse of
treated used water;
iii. eradication of hazardous entry into sewers and septic tanks, and sustaining
elimination of manual scavenging, through mechanization of sewer and septic tank
cleaning operations;
c) awareness creation along with large scale citizen outreach to create „jan-andolan‟,
and institutionalize „swachh‟ behaviour.
d) create institutional capacity to effectively implement programmatic interventions to
achieve mission objectives .
Used water management Objective: To ensure that no untreated faecal sludge or used
water is discharged into the environment, and all used water (including sewerage and
septage, grey water and black water) is safely contained, transported and treated, along with
maximum reuse of treated used water, in all cities with less than 1 lakh population. The
following components would be eligible for funding:
i. desludging equipment, for scheduled and need-based de-sludging of all septic tanks;
ii. interception and diversion of drains (I&D) (including last mile connectivity for
nearest sewer network);
iii. Construction of Sewage Treatment Plants (STPs)/ STP cum Faecal Sludge Treatment
plants (FSTPs) for used water treatment.
11
4.0 BRIEF DESCRIPTION OF THE PURKAZI NAGAR PANCHAYAT:
Purkazi is a town and a Nagar Panchayat in Muzaffarnagar district of Uttar Pradesh, India. It
is located on NH 58, Delhi-Dehradun highway, 56 km from temple city of Haridwar. It is
adjacent to the Uttarakhand state, connecting border of Haridwar district and Muzaffarnagar
district.
5.0 Geography:
Purkazi is located at Latitude 29.4726887 and Longitude 77.7085021. It has an average
elevation of 242 metres.
12
5.1 Demographics Purkazi:
As of 2001 India census, Purkazi had a population of 23599 &27516 in year 2011.
13
Area Covered
The scheme was accorded top priority by Government of Uttar Pradesh due to the fact that a
PIL No. 914/1996 is under consideration in Hon‟bIe Supreme Court for abatement of
pollution Town. The Govt. of Uttar Pradesh submitted the development made so far in
compliance with the directive of Hon‟ble Supreme Court of India, wherein, it has been
mentioned to stop the flow of waste water from the catchment of Purkazi to Drain. It has
been directed to stop the waste water flowing from Purkazi catchment to Natural drain
directly after proper treatment. Further on the behalf of Nagar Panchayat Purkazi in
compliance of instructions given by Monitoring committee for Yamuna constituted by
Hon‟ble National Green Tribunal in OA No.-06/2012 for abatement of pollution of town by
discharge of untreated wastewater into different Drains of Purkazi town.
14
7. DESIGN CRITERIA:
7.1 General: -
The project has been prepared based on the guidelines laid down in the Manual on
Drainage/Sewerage and Sewage Treatment, published by CPHEEO, Ministry of Urban
Development, Govt. of India (May-1999). The population & Sewage Generation of Purkazi
Town are given below:
15
90% due to industrial wastes, changed water use habits etc. Generally 80% of the water
supply may be expected to reach the Drains/Sewers.
Therefore, Interception factor has been taken as 0.8 for this project.
16
Population Peak Factor
For population <=20,000 3
For population > 20000and <=50000 2.5
For population >50000 and<=750000 2.25
For population >750000 2
n = 0.013 for RCC - S&S pipes, variable value of „n‟ has been considered in sewer design.
17
7.9.1 Spacing: -
As para in 3.71.2, table 3.31 of CPHEEO Manual, spacing between the manholes has been
provided as follows:
Drains/Sewer Diameter (mm) Up to 600 600 to 900 900 to 1200 1200 to 1500
Minimum Manhole Space (m) 30m or it can be less than 30m depending on the street.
The width/diameter of the manhole should not be less than internal diameter of the sewer
+150mm benching on both sides (150mm + 150mm).
The opening for entry into the manhole (without cover) should be of such minimum
dimensions as to allow a workman with the cleaning equipments to get access into the
interior of the manhole without difficulty. A circular opening is generally preferred. A
minimum clear opening of 60cm is recommended. Suitable steps usually of malleable cast
iron and plastic encapsulated shall be provided for entry.
7.10 BEDDING: -
18
supporting strength of a pipe as installed in the field is dependent upon the distribution of the
vertical load and the reaction against the bottom of the pipe. It also depends on the
magnitude and distribution of the lateral pressure acting on the sides of the pipe. In Purkazi
town Sub soil water table found at a depth of 2.0 m below Ground Level, hence RCC
Bedding (Ad Type) has been considered for this project.
The load factor does not contain a factor of safety. Load factors have been determined
experimentally and analytically for the commonly used construction condition for both
trench and embankment conduits.
19
For calculating the total weight of backfill over sewer pipe, the width of trench is taken
equal to Bc + 60 cm, where Bc is the outer dia of the pipe.
8. POPULATION:
The assessment of future population of a city is an important parameter to decide the city‟s
development and investment plan. In the context of the Sewerage system, population
estimation and projection are being carried out with the following objectives:
(1) to obtain a realistic estimate of the total current population in the city and the spatial
distribution of the same through empirical methods;
(2) to take informed strategic decisions on provision of sanitation infrastructure and services
for the city as a whole and for different parts of the city;
(3) In taking strategic decisions, to strive for a reasonable balance between the risks of
adequacy and viability in the future.
The census population of Purkazi city in various decades starting from 1971 to 2011 is as
under –
30000 27516
23599
25000
20000 17752
13412
15000 12047 Series1
10000
5000
0
1971 1981 1991 2001 2011
The Purkazi town has total 15 wards. As per census 2011, the population is 27516. The ward
wise population and area is provided in the technical statement of this report.
The future design population of Purkazi using different method is given in Table below.
20
Table: Summary of Population projection
Population (for different years) for the sewage quantity assessment and further design
purpose. Hence, total as well as ward wise population projection for the design years (2041
& 2056) for the sewerage project has been made using the same standard method.
Table: Population projection
Sl. No. Description Year 2026 Year 2041 Year 2056
The Purkazi town has been divided into two Zones viz.- Core Sanitation Zone and Outskirts
Zone on the basis of topographical and geographical features. Zone wise population and
coverage of wards are given below.
Zone Population
Sewerage Zone Ward covered
No. 2026 2041 2056
Core Sanitation
1 7, 8, 9,10,13, & 14 18617 24780 32982
Zone
21
9. EXISTING INFRASTRUCTURE
The existing water supply system of the city is not up to the standard as set by the ministry.
The existing source of water is based on ground water. There is no surface based water
supply scheme in the city.
Existing MoUD
Sl. No. Indicators
Service Level Benchmark
1 Coverage of Sewerage Network 0% 100%
Collection efficiency of Sewerage
2 0% 100%
Network
3 Adequacy of Sewage Treatment Capacity 0% 100%
4 Quality of sewage treatment 0% 100%
5 Extent of Reuse and Recycling of Sewage 0% 20%
Extent of cost recovery in sewage/ used
6 0% 100%
water management
Efficiency in redressal of customer
7 0% 80%
complaints
Efficiency in Collection of sewage / used
8 0% 90%
water Charges
9 Access to toilets 0% 100%
10 Scheduled desludging 0% 100%
Notified tariff for desludging (Collection
11 Yes Yes
and conveyance)
22
10.0 EXISTING DRAINAGE SYSTEM:
There are 4 Nallas/ drains in Purkazi Town which are contributing pollution in town by
discharging the untreated wastewater. Moahalla Jataan Drain & Bazaar Khurd drain are
merged into Idgah Road drain, futher Sufi wala drain & Gaushala drain are merged into
Khera Road Gaushala drain and ultimately reaching to the nearby pond.
As per the prevailing guidelines of SBM 2.0, the STP will be designed for 70% of base
year‟s flow i.e. 70% x 4.02 = 2.81 MLD say 2.85 MLD. Hence, the capacity of Sewage
Treatment Plant considered for the design and estimation is 2.85 MLD.
23
11.2 Septage Generation: -
12. PROPOSAL: This DPR is prepared for the following components to improve the sanitation
situation in the town.
Interception and diversion (I&D) of existing drains and to create a co- treatment facility for
used water from drains and faecal sludge from septic tanks (STP cum FSTP) in the town.
DPR includes laying of interception and diversion drains with allied works, interception and
diversion works, Main pumping station (MPS), Co-Treatment Facilities (sewage treatment
plant (2.85MLD STP) cum Faecal Sludge Treatment Plant (4.50 KLD FSTP), Cesspool
machine and reuse arrangement of treated effluent. Following proposals have been made in
this DPR to be funded under SBM2.0.
I&D AND STP WORKS:
Following proposals have been made as under:
12.1 Drains/Sewers and Appurtenances:
Laying and jointing of following RCC pipes with necessary manholes.
24
12.3 Pumping Station:
Sl. No. Description Size
1 At MPS 6.00 m dia, 7.89 m depth
One sewage treatment plant with co-treatment facilities for faecal sludge is proposed to be
constructed for the treatment of wastewater and septage. Since STP is constructed in
modules and considering the large capital investment; the capacity of STPs is decided based
on prevailing guidelines.
25
13. SEWAGE TREATMENT PLANT:
13.1 Brief Description of Sewage Treatment Processes
The objective of wastewater treatment is to separate various pollutants from water. There are
a large variety of treatment techniques designed to remove pollutants from wastewater. The
CPHEEO Manual on Sewerage and Sewage Treatment Systems (2013) discusses in detail
the different types of treatment technologies including decentralized waste water treatment
technologies along with their design considerations and operating requirements. A
significant classification categorizing the type of treatment is as below.
ii. Secondary treatment: Secondary process is stage where major biological reaction occurs.
The microbes present in the activated sludge degrade the organic pollutants that exerts the
biochemical oxygen demand resulting in the treatment of wastewater.
The various technologies are described in the later sections 2.2
iii. Disinfection: The last stage in the wastewater treatment process is disinfection. The process
ensures the elimination of E-Coli and other microbes to permissible level. Disinfection
using chlorine is a common practice. It shall be provided for all the technologies mentioned
in the Ready Reckoner document. Ozone and Ultra Violet(UV) radiation canals obe used for
disinfection but the see methods of disinfection are not in common use
iv. Depending on need, Tertiary treatment process after Secondary process can be used to
remove Phosphorous and Nitrogen etc. It can be further treated using Ultra filtration and
Reverse Osmosis techniques to meet industry process requirements.
26
Table: Classification of common waste water treatment processes
27
a) Waste Stabilization Pond
b) Root Zone or Constructed Wetland
28
As per the prevailing guidelines and considering the availability of land Extended Aeration
Technology is best suited hence the same has been adopted for this project.
After treatment, 350 mm dia & 60 m length of gravity main has been proposed in this DPR
to discharge the treated water in to the existing Pond.
29
20. FUNDING PATTERN
The project shall be funded as per the guidelines of SBM 2.0.
21. CONCLUSION:
With the above, The Interception & Diversion (I&D) and STP works in Purkazi town
with an estimated cost of works of Rs. 879.08 Lakh and operation and maintenance cost
for 5 years as Rs. 447.94 Lac (Total project cost Rs. 1327.02 Lakh) is being submitted
for technical and financial approval.
(Abu. Zaid)
Counter Signed Executive Engineer
(Neelam)
Superintending Engineer
Construction Division
U.P. Jal Nigam (Urban)
Meerut
30
UTTAR PRADESH JAL NIGAM
(NAGARIYA)
UNDER
SBM 2.0
EXECUTIVE ENGINEER
CONSTRUCTION DIVISION (E&M)
Estimate No. : U.P JAL NIGAM (NAGARIYA)
Year : 2023-24 SAHARANPUR
31
OFFICE OF THE EXECUTIVE ENGINEER, CONSTRUCTION DIVISION (E&M)
U.P. JAL NIGAM(URBAN), SAHARANPUR
ESTIMATE OF E/M WORKS FOR MPS&STP PURKAZI , DISTRICT- MUZAFFAR NAGAR
IN SBM 2.0 PROGRAMME.
REPORT
This E&M Estimate has been prepared for MPS&STP Purkazi in District Muzaffarnagar
under SBM 2.0 programe as per Letter No. 192/vividh-11/16 Dated 15/02/2024 of
Executive Engineer, Construction Division, U.P Jal Nigam (Urban),Muzaffarnagar on
whatsapp. In this estimate provision of E&M works in have been made with 3 months
Trial & Run. Provision of HT Panls, Substation and DG Set in MPS have not been made
because these items are common items for MPS and STP ,Hence included in STP Cost.
Rates for E&M works are taken from UPJN(E&M), SOR-2020 and 2022, Rajasthan
PWD,BSR-2022& MJP SOR -2022
Hence E&M works Total Rs-750.97 Lakh (Rs- 320.95 Lakh (E&M work cost) +O&M
cost of five years Rs- 432.02 Lakh (E&M o&m cost including STP) has been submitted
for approval and allotment of funds.
Executive Engineer
32
FINANCIAL STATEMENTS
33
OFFICE OF THE EXECUTIVE ENGINEER, CONSTRUCTION DIVISION, U.P. JAL NIGAM (URBAN)
MUZAFFARNAGAR
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.
(UNDER SBM-2.0 PROGRAMME)
Prepared By Prepared By
Recommended By Approved By
34
OFFICE OF THE EXECUTIVE ENGINEER, CONSTRUCTION DIVISION, U.P. JAL NIGAM (URBAN)
MUZAFFARNAGAR
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Approved By
(R.K. Pankaj)
Chief Engineer (Ghzaiabad Zone)
U.P. Jal Nigam (Urban)
Ghaziabad
35
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR
PRADESH JAL NIGAM, NAGARIYA SAHARANPUR
ESTIMATE OF E/M WORKS FOR MPS & STP PURKAZI , DISTRICT- MUZAFFARNAGAR
IN SBM 2.0 PROGRAMME.
Form-'J' (E&M)
Prepared By Recommended by
Technically Approved By
(Rajneesh Kumar Maurya)
JE(T)
(R. K. Pankaj)
Chief Engineer
Ghaziabad Zone
U.P.Jal Nigam(Nagriya)
Ghaziabad
36
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN
AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
ASSISTANT ENGINEER
37
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Total Rs.
Sl. No. Description of work
(in lacs)
1 2 3
ASSISTANT ENGINEER
38
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M),
UTTAR PRADESH JAL NIGAM, NAGARIYA SAHARANPUR
ESTIMATE FOR MPS IN PURKAZI, Dist MUZAFFAR NAGAR
Assistant Engineer
39
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT
PLANT FOR EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR,
U.P.(UNDER SBM-2.0 PROGRAMME)
Amount
Sl. No. Items % Inflation
(Rs. lacs)
1 2 3 4
ASSISTANT ENGINEER
40
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0
PROGRAMME)
Amount
Sl. No. Description of works Qty/Amount Unit Rate
(Rs. lacs)
1 2 3 4 5 6
ASSISTANT ENGINEER
41
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR,
U.P.(UNDER SBM-2.0 PROGRAMME)
BREAK UP OF COST
Break - up of Cost
Machinary
Building
Sl. Cost Earth work Timbering
Particulars Pipe PCC/
No in Lacs road cutting, Dewatering
work RCC
and misc works
1 2 3 4 5 6 7 8
A CIVIL WORKS
1 Estimate of Interception & Diversion of Nalla (Drain) Near STP
18.67 0.93 5.60 12.14
2 Estimate of Pipe Drain (250mm to 450mm dia RCC NP-3 Pipe)
59.38 2.97 5.94 50.47
3 Estimate of Main Pumping Station (MPS) (16.03 mld Peak Flow)
& Coarse Screen Channel. 51.85 15.56 25.93 10.37
4 Estimate of MPS Site Development, Buildings & Other Allied
Works 30.99 6.20 9.30 9.30 6.20
5 Estimate of Rising Main 300 mm Dia DI K-9.
1.17 0.59 0.23 0.35
6 Sewage Treatment Plant (STP) cum FSTP 2.85mld Capacity,
4.50kld Co-treatment of Septage & Cesspool tanker with all
necessary units. 291.20 14.56 43.68 43.68 174.72 14.56
7 Treated Effluent Disposal Pipe (350mm dia RCC NP-3). 2.18 1.09 0.44 0.65
ASSISTANT ENGINEER
42
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR
PRADESH JAL NIGAM, NAGARIYA SAHARANPUR
Rate Amount
Qty
S.N. Particulars Month
(Nos) (in Lacs) (in Lacs)
1 2 3 4 5 6
1 Power Consumption for (MPS+STP)( taken
For 1 year 41.25
from trial run calculation)
Grand Total 41.25
a 1st year Electricity Charges Total 41.25
b 2nd year Electricity Charges 41.25
c 3rd year Electricity Charges 41.25
d 4th year Electricity Charges 41.25
e 5th year Electricity Charges 41.25
Total With Electricity 206.25
Say 206.25 Lacs
Assistant Engineer
43
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR
PRADESH JAL NIGAM, NAGARIYA SAHARANPUR
Rate Amount
Qty
S.N. Particulars Month
(Nos) (in Lacs) (in Lacs)
1 2 3 4 5 6
3 Diesel and lubricant for mps & stp(in lacs) For 1 year 10.91
Assistant Engineer
44
TECHNICAL STATEMENTS
45
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
1 1971 12047
2 1981 13412 1365
3 1991 17752 4340
4 2001 23599 5847
5 2011 27516 3917
Total 15469
Average 3867.25
Say 3868.00
46
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
1 1971 12047
2 1981 13412 1365
3 1991 17752 4340 2975
4 2001 23599 5847 1507
5 2011 27516 3917 0
Total 15469 4482
Average 3867.25 1494.00
Say 3868 1494
2011 27516 - - - - -
2023 27516 1.2 3868 4641.60 2.2 1972.08 34130
2025 27516 1.4 3868 5415.20 2.4 2509.92 35442
2026 27516 1.5 3868 5802.00 2.5 2801.25 36120
2040 27516 2.9 3868 11217.20 3.9 8448.57 47182
2041 27516 3.0 3868 11604.00 4.0 8964.00 48084
2055 27516 4.4 3868 17019.20 5.4 17748.72 62284
2056 27516 4.5 3868 17406.00 5.5 18488.25 63411
47
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
1 1971 12047
2 1981 13412 1365 0.1100
3 1991 17752 4340 0.3200
4 2001 23599 5847 0.3300
5 2011 27516 3917 0.1700
Total 15469
Note: Ignoring the negative figure for calculation of Geometric mean (rg).
= 0.21
2011 27516 - - - - -
2023 27516 1.2 0.2100 1.2100 1.2570 34589
2025 27516 1.4 0.2100 1.2100 1.3059 35933
2026 27516 1.5 0.2100 1.2100 1.3310 36624
2040 27516 2.9 0.2100 1.2100 1.7381 47826
2041 27516 3.0 0.2100 1.2100 1.7716 48747
2055 27516 4.4 0.2100 1.2100 2.3134 63657
2056 27516 4.5 0.2100 1.2100 2.3579 64882
48
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
Sr. No. Year (Y) Population (X) Sr. No. Year (Y) Population (X)
49
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
45000
y = 4112.5x + 10640
25000 y = 11520e0.2217x 40000
35000
20000 30000
25000
15000 20000
15000
10000
10000
5000
5000
0
01-01-2046
01-01-1971
01-01-1976
01-01-1981
01-01-1986
01-01-1991
01-01-1996
01-01-2001
01-01-2006
01-01-2011
01-01-2016
01-01-2021
01-01-2026
01-01-2031
01-01-2036
01-01-2041
01-01-2051
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5
50
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Comparative Statement Showing Anticipated Population Projections by various methods, suggested by CPHEEO Manual
6 ADOPTED POPULATION :-
Adopted
S.No. Design Stage / Year
Population
1 Census (Year 2011) 27516
2 Present Stage(Year 2023) 34589
3 Year 2025 35933
4 Initial Stage (Year 2026) 36624
5 Year 2040 47826
6 Mid Stage (Year 2041) 48747
7 Year 2055 63657
8 Design Stage (Year 2056) 64882
51
INTERCEPTION AND DIVERSION WORKS AND SEWAGE
TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP),
MUZAFFARNAGAR, U.P.
Ward Wise Population
52
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
53
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
Zone Population
Sewerage Zone Ward covered
No. 2026 2041 2056
54
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
55
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
56
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR,
U.P.
DESIGN CHART OF PIPE DRAIN FOR I&D
Average
DEPTH OF HYD. LEVEL IN
NODE NO. Flow Vf DESIGN PEAK FLOW GROUND LEVEL INVERT LEVEL (M)
SEC. Ult. INVERT (M)
(LPS) DIA. in SLOPE
LENGTH Qf d/D depth of
mm 1 in
(M) VfxVd/Vf=v flow
HEAD TAIL DESIGN m/sec. Qd/Qf vd/Vf HEAD TAIL HEAD TAIL HEAD TAIL HEAD TAIL
d,m/sec
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1 2 22 26.04 250 260 0.652 32.033 0.81 0.98 0.64 0.76 0.189 252.52 252.93 250.36 250.28 2.16 2.66 250.55 250.46
2 3 22 26.04 250 260 0.652 32.033 0.81 0.98 0.64 0.76 0.189 252.93 252.70 250.28 250.19 2.66 2.51 250.46 250.38
3 4 25 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 252.70 252.53 250.19 250.11 2.51 2.42 250.39 250.30
4 5 15 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 252.53 252.60 250.11 250.06 2.42 2.54 250.30 250.25
5 6 21 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 252.60 252.73 250.06 249.99 2.54 2.74 250.25 250.18
6 7 30 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 252.73 252.80 249.99 249.89 2.74 2.91 250.18 250.08
7 8 29 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 252.80 253.45 249.89 249.79 2.91 3.66 250.08 249.99
8 9 45 26.04 250 300 0.607 29.822 0.87 1.00 0.61 0.79 0.198 253.45 253.25 249.79 249.64 3.66 3.61 249.99 249.84
9 10 22 86.81 450 450 0.734 116.761 0.74 0.96 0.71 0.72 0.323 253.25 252.30 249.43 249.38 3.82 2.92 249.75 249.70
10 11 38 86.81 450 450 0.734 116.761 0.74 0.96 0.71 0.72 0.323 252.30 252.90 249.38 249.29 2.92 3.61 249.70 249.62
11 MPS 10 86.81 450 450 0.734 116.761 0.74 0.96 0.71 0.72 0.323 252.90 252.88 249.29 249.27 3.61 3.61 249.62 249.60
TP-2 9 10 60.76 350 300 0.760 73.157 0.83 0.99 0.76 0.77 0.268 252.95 252.93 250.61 250.57 2.34 2.36 250.87 250.84
57
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR PURKAZI DRAIN, DISTT. - MUZAFFARNAGAR (UNDER SBM-2.0 PROGRAMME)
DESIGN OF BEDDING
Class of Bedding Code Load Class of Bedding Code Load Class of Bedding Code Load Length
Factor Facto Factor
B=Shaped bottom or compacted granular
Ab =(Code -2) = Concrete cradel - plain r Ad= (Code -5) = Concrete
1 1.9 concrete and carefully tamped back fill. PCC 3 2.8 cradel - RCC with P-1%(1% 5 4.8 1
bedding with carefully compacted backfill
1:2:4 reinforcement)
Aa = Concrete cradel - plain concrete and lightly Ac = (Code -4) = Concrete cradel - RCC with P- Subsoil depth below G.L.
2 2.2 0.4%(0.4% reinforcement) 4 3.4 in m 2
tamped backfill. PCC-1:4:8
If Sewer is laid in Subsoil water condition use RCC with 1 % or0.4% steel Bedding Factor = (Design Load x Factor of Safety) /Ultimate load (Three edge Bearing Strength)
BEDDING FACTOR
(Saturated
Width of Trench
Thickness of pipe
Code OF BEDING
Class of Bedding
Av.Depth OF I.L.
L: eff. length of
H=IL-(d+t) in M
Bc=d+2t (in m)
Cs (Table 6.5)
earth + Road
Bd=Bc+0.6
ULTIMATE
Design
DIA IN M
Manual
Material) = Ww
(NP-3)
in mm
Bc/2H
H/Bd
L/2H
NODE NODE Wsc=Cs* Load
in M
U/S
D/S
(M)
Wc=Cn* =π/4x(d^
3
U/S D/S 6250*1.5 Wt=Wc+
W(2080)*Bd^2 2)x1000
Wsc+Ww
+
(2400)xBdx0.2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 2 250 30 0.31 2.29 2.79 2.54 2.26 1.00 0.91 2.50 1.80 3537.21 0.22 0.07 0.0402 376.88 49.11 3963.19 2250 2.64 Ad 5
2 3 250 30 0.31 2.79 2.64 2.71 2.43 1.00 0.91 2.70 1.92 3743.90 0.21 0.06 0.0386 361.88 49.11 4154.88 2250 2.77 Ad 5
3 4 250 30 0.31 2.64 2.55 2.60 2.32 1.00 0.91 2.60 1.86 3640.55 0.22 0.07 0.0402 376.88 49.11 4066.54 2250 2.71 Ad 5
4 5 250 30 0.31 2.55 2.67 2.61 2.33 1.00 0.91 2.60 1.86 3640.55 0.21 0.07 0.0386 361.88 49.11 4051.54 2250 2.70 Ad 5
5 6 250 30 0.31 2.67 2.87 2.77 2.49 1.00 0.91 2.80 1.98 3847.25 0.20 0.06 0.037 346.88 49.11 4243.23 2250 2.83 Ad 5
6 7 250 30 0.31 2.87 3.04 2.96 2.68 1.00 0.91 3.00 2.10 4053.94 0.19 0.06 0.0352 330.00 49.11 4433.05 2250 2.96 Ad 5
7 8 250 30 0.31 3.04 3.79 3.42 3.14 1.00 0.91 3.50 2.30 4398.43 0.16 0.05 0.0298 279.38 49.11 4726.91 2250 3.15 Ad 5
8 9 250 30 0.31 3.79 3.74 3.77 3.49 1.00 0.91 3.90 2.46 4674.02 0.14 0.05 0.0262 245.63 49.11 4968.75 2250 3.31 Ad 5
9 10 450 75 0.60 4.00 3.10 3.55 3.02 1.00 1.20 2.60 1.86 6147.07 0.17 0.10 0.0316 296.25 159.11 6602.43 3234 3.06 Ad 5
10 11 450 75 0.60 3.10 3.78 3.44 2.91 1.00 1.20 2.50 1.80 5967.36 0.17 0.10 0.0316 296.25 159.11 6422.72 3234 2.98 Ad 5
11 MPS 450 75 0.60 3.78 3.78 3.78 3.26 1.00 1.20 2.80 1.98 6506.50 0.15 0.09 0.0280 262.50 159.11 6928.10 3234 3.21 Ad 5
TP-2 9 350 75 0.50 2.52 2.53 2.53 2.10 1.00 1.10 2.00 1.50 4303.20 0.24 0.12 0.0434 406.88 96.25 4806.33 2516 2.87 Ad 5
58
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR,
U.P.
DESIGN CHART OF PIPE FOR TREATED EFFLUENT DISPOSAL PIPE
Average
DEPTH OF HYD. LEVEL IN
NODE NO. Flow Vf DESIGN PEAK FLOW GROUND LEVEL INVERT LEVEL (M)
SEC. Ult. INVERT (M)
(LPS) DIA. in SLOPE
LENGTH Qf d/D depth of
mm 1 in
(M) VfxVd/Vf=v flow
HEAD TAIL DESIGN m/sec. Qd/Qf vd/Vf HEAD TAIL HEAD TAIL HEAD TAIL HEAD TAIL
d,m/sec
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
STP POND 60 82.47 350 130 1.332 128.230 0.64 0.92 1.23 0.66 0.230 252.900 252.450 251.55 251.09 1.35 1.36 251.78 251.32
59
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR
EXISTING DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
Description
MPS
Location of Pumping Station
Design peak flow,in LPS 185.52
Providie RT=3.75 minutes,sump capacity, (in M3 ) 41.74
Assumed Water Depth in sump in M 1.48
Required Area of sump, M2 28.21
Theoritical Dia in M 5.99
Proposed Dia in M 6.00
Provide Area of sump, M2 28.26
Actual Water Depth in sump in M 1.48
G.L. M 252.88
Plinth level, M 253.38
I.L. of incoming Sewer, M 249.27
Drop before screen, M 0.10
Drop after screen, M 0.15
Floor Level of after Screen, M 249.02
Free fall in sump, M 0.25
Water Level in sump, M 248.77
Dead storage, M 1.80
I.L. of sump floor in M 245.49
Height of sump upto plinth in M 7.89
Height of Vertical Colomn of Pipe 6.39
Level at disposal point of rising main 257.38
Static Head (Level of Disposal Point -Bed Level of MPS) 11.89
60
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
SCREEN CHANNEL
1. Let velocity through Screen = 0.90 mps
7. SWD = 0.26 m
61
DESIGN FOR ECONOMIC SIZE OF RISING MAIN (Taking Water Hammer pressure into consideration)
NAME OF SCHEME :- Purkazi I&D Scheme, For Average Hours
Line MPS to STP
1) Water requirement Discharge
Pumping Hours Design years
Stage Year LPM MLD(Q) PIPE DATA Excavation Rate per CUM 269.94
Initial 2026 2793.00 2.346 14 (n) DI pipe Rate/M
Excavation
Middle 2041 3717.00 3.122 14 15 Dia. In mm HWC
Type Class Supply Laying& Jointing Rates per M
Ultimate 2056 4948.00 4.156 14 30
80 DI K-9 140 1092.00 0.00 198.24
100 DI K-9 140 1332.00 0.00 207.85
2) pumping main length (M) DI 20.00 150 DI K-9 140 1892.00 0.00 232.82
{ Hs 1.48 200 DI K-9 140 2547.00 0.00 259.14
3)static head of pumps in M
{ Hd 10.41 11.89 250 DI K-9 140 3419.00 0.00 286.81
4)Combined eff. Of pump set 70 300 DI K-9 140 4341.00 0.00 315.83
5)Cost of Pumping unit( perKw.) 25000.00 350 DI K-9 140 5333.00 0.00 346.20
6)Interest Rate (%) 10 400 DI K-9 140 6469.00 0.00 377.92
7) Life of Electric Motor & Pumping set (YEAR) 15 450 DI K-9 140 7719.00 0.00 410.98
8)Energy Charges Per KWH unit in Rs (Ec) 8.50 500 DI K-9 140 9030.00 0.00 445.40
600 DI K-9 140 11831.00 0.00 518.28
700 DI K-9 140 15026.00 0.00 596.57
CALCULATIONS : 1st 15 years 2nd 15years Date for Water Hammer Calculation
1.Average Discharge (Qa) 2.73 mld 3.64 mld k= 2.07E+08 kg/sqm
2.Average hours of pumping for Average Dis. (Xa) 14 hrs 14 hrs E(CI) = 7.50E+09 kg/sqm
3.KW.reqd.at 70%combined eff.of pump set (Kw) 0.868 H1 1.155 H2 E(DI) = 1.70E+10 kg/sqm
4.Average annual energy charges in Rs. (Cr) 43463.56 Kw1 43463.56 Kw2 E(AC) = 3.00E+09 kg/sqm
5.Capitalised Energy charges (Cc) 7.606 Cr1 7.606 Cr2 g= 9.81 kg/sqm
6.Present worth of sum required after 15Yrs for pump 0.239 cost of pump Hmax 1425xV0/g/(1+Kd/Ect)^0.5
{
15Yrs for energy 0.239 Cc2 1425 V0
Table - 1 Velocity & Head losses (in Metres) for defferent sizes pipes
Hmax (1+kd/Ect)
x
g
Total Head losses including 10% Ratio Max
Friction losses for DI pipe in DI K-9 Head
Velocity in M/sec (V0) other losses + Hd + D/s losses in
metres Internal design including
Sl.no. DIA. mm metres Max. Water Pressure in Hmax to
Wall thickness hammer Max. head Kg/cm2 internal
in CT) pressure in Hmax
1st stage 2nd stage 1st stage 2nd stage 1st stage 2nd stage Design
metres (Hmax)
Pressure
1 80 10.798 14.373 22.17 37.64 36.282 53.289 0.0060 1454.88 1491.161 50 2.98
2 100 6.911 9.199 7.48 12.70 20.118 25.855 0.0060 915.28 935.397 50 1.87
3 150 3.071 4.088 1.04 1.76 13.032 13.829 0.0063 392.84 405.869 50 0.81
4 200 1.728 2.300 0.26 0.43 12.171 12.368 0.0064 213.60 225.769 50 0.45
5 250 1.106 1.472 0.09 0.15 11.985 12.051 0.0068 133.49 145.479 50 0.29
6 300 0.768 1.022 0.04 0.06 11.929 11.956 0.0072 90.85 102.779 50 0.21
7 350 0.564 0.751 0.02 0.03 11.908 11.921 0.0077 65.75 77.657 40 0.19
8 400 0.432 0.575 0.01 0.01 11.900 11.906 0.0081 49.58 61.481 40 0.15
9 450 0.341 0.454 0.00 0.01 11.895 11.899 0.0085 38.66 50.551 40 0.13
10 500 0.276 0.368 0.00 0.01 11.893 11.896 0.009 31.01 42.906 40 0.11
11 600 0.192 0.256 0.00 0.00 11.891 11.892 0.0099 21.15 33.043 40 0.08
12 700 0.141 0.188 0.00 0.00 11.891 11.891 0.0108 15.32 27.207 32 0.09
62
Table - 2 KILOWATTS & COST OF PUMP SETS REQUIRED FOR DEFFERENT SIZE PIPE AND PIPE COST (Rs. In Thousands)
Cost of pipe
1st stage 2nd stage
line(supply+
laying &
Sl.No. DIA. mm KW Pump Cost @ Capitalised Pump cost @ Capitalised
H1 Total Head in Annual Energy H2 Total Head in KW Required + Annual Energy jointing in
Required + Rs.25000.00/ Energy Charges Rs.30000.00/ Energy Charges
(Metre) Charges (Cr1) (Metre) Stand bye Charges (Cr2)
Stand bye KW (Cc1) KW (Cc2) thousand
K-9
1 80 48.172 41.80 1044.90 1816.60 13817.10 65.179 75.28 2258.44 3272.00 24886.81 25.80
2 100 32.008 27.77 694.29 1207.05 9180.84 37.745 43.60 1307.86 1894.80 14411.86 30.80
3 150 24.922 21.62 540.59 939.84 7148.42 25.719 29.70 891.14 1291.08 9819.92 42.50
4 200 24.061 20.88 521.92 907.38 6901.52 24.258 28.02 840.52 1217.73 9262.09 56.12
5 250 23.875 20.71 517.87 900.35 6848.04 23.941 27.65 829.56 1201.85 9141.25 74.12
6 300 23.819 20.67 516.66 898.24 6832.02 23.846 27.54 826.27 1197.09 9105.06 93.14
7 350 23.798 20.65 516.22 897.46 6826.11 23.811 27.50 825.06 1195.33 9091.69 113.58
8 400 23.790 20.64 516.02 897.13 6823.58 23.796 27.48 824.54 1194.58 9085.98 136.94
9 450 23.785 20.64 515.93 896.97 6822.37 23.789 27.48 824.29 1194.22 9083.26 162.60
10 500 23.783 20.64 515.89 896.89 6821.75 23.786 27.47 824.16 1194.04 9081.85 189.51
11 600 23.781 20.63 515.85 896.82 6821.20 23.782 27.47 824.05 1193.87 9080.61 246.99
12 700 23.781 20.63 515.83 896.79 6821.00 23.781 27.47 824.01 1193.81 9080.15 312.45
Table-3 COMPRATIVE STATEMENT OF OVERALL COST OF PUMPING MAIN FOR DIFFERENT PIPE SIZE(Rs. in Thousand)
Cost of pipe line 1st stage 2nd stage
(supply+10%for Grand Total of
Pipe size in Minimum Value CONCLUSION
Capitalised Capitalised capitalised
SL. No. specials+laying & Cost of Capatalised Cost of Pump Capatalised
mm (d) Energy charges Energy charges cost for 30 (In Thousand)
pump sets Total cost (In Sets Total cost (In
jointing in (Cc1) (Cc2) years(In
Thousand) Thousand)
Thousand) DI K-9
thousand
1 80 25.80 1044.90 13817.10 14887.80 2258.44 24886.81 27171.05 42058.86
2 100 30.80 694.29 9180.84 9905.92 1307.86 14411.86 15750.51 25656.44 Most economical size of
3 150 42.50 540.59 7148.42 7731.51 891.14 9819.92 10753.56 18485.07 Rising Main Dia. In mm
4 200 56.12 521.92 6901.52 7479.57 840.52 9262.09 10158.73 17638.30
5 250 74.12 517.87 6848.04 7440.03 829.56 9141.25 10044.93 17484.96 17466.29 300
6 300 93.14 516.66 6832.02 7441.82 826.27 9105.06 10024.46 17466.29
7 350 113.58 516.22 6826.11 7455.91 825.06 9091.69 10030.34 17486.24
Water Hammer Device not
8 400 136.94 516.02 6823.58 7476.54 824.54 9085.98 10047.46 17524.00
required
9 450 162.60 515.93 6822.37 7500.91 824.29 9083.26 10070.15 17571.06
10 500 189.51 515.89 6821.75 7527.15 824.16 9081.85 10095.52 17622.67
11 600 246.99 515.85 6821.20 7584.03 824.05 9080.61 10151.65 17735.68
12 700 312.45 515.83 6821.00 7649.28 824.01 9080.15 10216.62 17865.90
Reference : Mannual on Water Supply and Treatment .Ministry of Urban Development , New Delhi
Note: Concidering average and peak flow 300mm dia pipe has been adopted as per velocity criteria.
63
DESIGN FOR ECONOMIC SIZE OF RISING MAIN (Taking Water Hammer pressure into consideration)
NAME OF SCHEME :- Purkazi I&D Scheme, For Peak Hours
Line MPS to STP
1) Water requirement Discharge
Pumping Hours Design years
Stage Year LPM MLD(Q) PIPE DATA Excavation Rate per CUM 269.94
Initial 2026 6982.00 2.514 6 (n) DI pipe Rate/M
Excavation
Middle 2041 9293.00 3.345 6 15 Dia. In mm HWC
Type Class Supply Laying& Jointing Rates per M
Ultimate 2056 11132.00 4.008 6 30
80 DI K-9 140 1092.00 0.00 198.24
100 DI K-9 140 1332.00 0.00 207.85
2) pumping main length (M) DI 20.00 150 DI K-9 140 1892.00 0.00 232.82
{ Hs 1.48 200 DI K-9 140 2547.00 0.00 259.14
3)static head of pumps in M
{ Hd 10.41 11.89 250 DI K-9 140 3419.00 0.00 286.81
4)Combined eff. Of pump set 70 300 DI K-9 140 4341.00 0.00 315.83
5)Cost of Pumping unit( perKw.) 25000.00 350 DI K-9 140 5333.00 0.00 346.20
6)Interest Rate (%) 10 400 DI K-9 140 6469.00 0.00 377.92
7) Life of Electric Motor & Pumping set (YEAR) 15 450 DI K-9 140 7719.00 0.00 410.98
8)Energy Charges Per KWH unit in Rs (Ec) 8.50 500 DI K-9 140 9030.00 0.00 445.40
600 DI K-9 140 11831.00 0.00 518.28
700 DI K-9 140 15026.00 0.00 596.57
CALCULATIONS : 1st 15 years 2nd 15years Date for Water Hammer Calculation
1.Average Discharge (Qa) 2.93 mld 3.68 mld k= 2.07E+08 kg/sqm
2.Average hours of pumping for Average Dis. (Xa) 6 hrs 6 hrs E(CI) = 7.50E+09 kg/sqm
3.KW.reqd.at 70%combined eff.of pump set (Kw) 2.169 H1 2.599 H2 E(DI) = 1.70E+10 kg/sqm
4.Average annual energy charges in Rs. (Cr) 18627.24 Kw1 18627.24 Kw2 E(AC) = 3.00E+09 kg/sqm
5.Capitalised Energy charges (Cc) 7.606 Cr1 7.606 Cr2 g= 9.81 kg/sqm
6.Present worth of sum required after 15Yrs for pump 0.239 cost of pump Hmax 1425xV0/g/(1+Kd/Ect)^0.5
{
15Yrs for energy 0.239 Cc2 1425 V0
Table - 1 Velocity & Head losses (in Metres) for defferent sizes pipes
Hmax (1+kd/Ect)
x
g
Total Head losses including 10% Ratio Max
Friction losses for DI pipe in DI K-9 Head
Velocity in M/sec (V0) other losses + Hd + D/s losses in
metres Internal design including
Sl.no. DIA. mm metres Max. Water Pressure in Hmax to
Wall thickness hammer Max. head Kg/cm2 internal
in CT) pressure in Hmax
1st stage 2nd stage 1st stage 2nd stage 1st stage 2nd stage Design
metres (Hmax)
Pressure
1 80 26.995 33.879 120.79 183.88 144.761 214.153 0.0060 3637.20 3781.960 50 7.56
2 100 17.277 21.683 40.75 62.03 56.711 80.118 0.0060 2288.20 2344.910 50 4.69
3 150 7.679 9.637 5.66 8.61 18.112 21.361 0.0063 982.09 1000.205 50 2.00
4 200 4.319 5.421 1.39 2.12 13.423 14.223 0.0064 533.99 547.416 50 1.09
5 250 2.764 3.469 0.47 0.72 12.407 12.677 0.0068 333.74 346.142 50 0.69
6 300 1.920 2.409 0.19 0.29 12.103 12.214 0.0072 227.13 239.228 50 0.48
7 350 1.410 1.770 0.09 0.14 11.990 12.043 0.0077 164.37 176.362 40 0.44
8 400 1.080 1.355 0.05 0.07 11.942 11.970 0.0081 123.95 135.896 40 0.34
9 450 0.853 1.071 0.03 0.04 11.920 11.935 0.0085 96.64 108.559 40 0.27
10 500 0.691 0.867 0.02 0.02 11.908 11.917 0.009 77.53 89.439 40 0.22
11 600 0.480 0.602 0.01 0.01 11.897 11.901 0.0099 52.88 64.777 40 0.16
12 700 0.353 0.443 0.00 0.00 11.893 11.895 0.0108 38.29 50.184 32 0.16
64
Table - 2 KILOWATTS & COST OF PUMP SETS REQUIRED FOR DEFFERENT SIZE PIPE AND PIPE COST (Rs. In Thousands)
Cost of pipe
1st stage 2nd stage
line(supply+
laying &
Sl.No. DIA. mm KW Pump Cost @ Capitalised Pump cost @ Capitalised
H1 Total Head in Annual Energy H2 Total Head in KW Required + Annual Energy jointing in
Required + Rs.25000.00/ Energy Charges Rs.30000.00/ Energy Charges
(Metre) Charges (Cr1) (Metre) Stand bye Charges (Cr2)
Stand bye KW (Cc1) KW (Cc2) thousand
K-9
1 80 156.651 339.81 8495.34 6329.79 48144.36 226.043 587.38 17621.25 10941.18 83218.60 25.80
2 100 68.601 148.81 3720.28 2771.94 21083.39 92.008 239.08 7172.54 4453.48 33873.21 30.80
3 150 30.002 65.08 1627.02 1212.28 9220.58 33.251 86.40 2592.10 1609.45 12241.50 42.50
4 200 25.313 54.91 1372.73 1022.81 7779.47 26.113 67.86 2035.66 1263.96 9613.65 56.12
5 250 24.297 52.71 1317.65 981.77 7467.31 24.567 63.84 1915.13 1189.12 9044.43 74.12
6 300 23.993 52.05 1301.15 969.47 7373.80 24.104 62.63 1879.02 1166.70 8873.92 93.14
7 350 23.880 51.80 1295.06 964.93 7339.28 23.933 62.19 1865.69 1158.42 8810.97 113.58
8 400 23.832 51.70 1292.45 962.99 7324.52 23.860 62.00 1859.99 1154.89 8784.06 136.94
9 450 23.810 51.65 1291.21 962.07 7317.49 23.825 61.91 1857.28 1153.20 8771.23 162.60
10 500 23.798 51.62 1290.57 961.59 7313.85 23.807 61.86 1855.87 1152.33 8764.59 189.51
11 600 23.787 51.60 1290.00 961.17 7310.65 23.791 61.82 1854.64 1151.56 8758.76 246.99
12 700 23.783 51.59 1289.80 961.01 7309.47 23.785 61.81 1854.18 1151.28 8756.61 312.45
Table-3 COMPRATIVE STATEMENT OF OVERALL COST OF PUMPING MAIN FOR DIFFERENT PIPE SIZE(Rs. in Thousand)
Cost of pipe line 1st stage 2nd stage
(supply+10%for Grand Total of
Pipe size in Minimum Value CONCLUSION
Capitalised Capitalised capitalised
SL. No. specials+laying & Cost of Capatalised Cost of Pump Capatalised
mm (d) Energy charges Energy charges cost for 30 (In Thousand)
pump sets Total cost (In Sets Total cost (In
jointing in (Cc1) (Cc2) years(In
Thousand) Thousand)
Thousand) DI K-9
thousand
1 80 25.80 8495.34 48144.36 56665.50 17621.25 83218.60 100865.65 157531.15
2 100 30.80 3720.28 21083.39 24834.47 7172.54 33873.21 41076.54 65911.01 Most economical size of
3 150 42.50 1627.02 9220.58 10890.10 2592.10 12241.50 14876.10 25766.20 Rising Main Dia. In mm
4 200 56.12 1372.73 7779.47 9208.33 2035.66 9613.65 11705.43 20913.76
5 250 74.12 1317.65 7467.31 8859.08 1915.13 9044.43 11033.68 19892.76 19534.90 400
6 300 93.14 1301.15 7373.80 8768.09 1879.02 8873.92 10846.08 19614.17
7 350 113.58 1295.06 7339.28 8747.92 1865.69 8810.97 10790.24 19538.16
Water Hammer Device not
8 400 136.94 1292.45 7324.52 8753.91 1859.99 8784.06 10780.99 19534.90
required
9 450 162.60 1291.21 7317.49 8771.30 1857.28 8771.23 10791.11 19562.42
10 500 189.51 1290.57 7313.85 8793.92 1855.87 8764.59 10809.97 19603.90
11 600 246.99 1290.00 7310.65 8847.64 1854.64 8758.76 10860.38 19708.02
12 700 312.45 1289.80 7309.47 8911.72 1854.18 8756.61 10923.24 19834.96
Reference : Mannual on Water Supply and Treatment .Ministry of Urban Development , New Delhi
Note: Concidering average and peak flow 300mm dia pipe has been adopted as per velocity criteria.
65
DESIGN FOR ECONOMIC SIZE OF RISING MAIN (Taking Water Hammer pressure into consideration)
NAME OF SCHEME :- Purkazi I&D Scheme, For Non Peak Hours
Line MPS to STP
1) Water requirement Discharge
Pumping Hours Design years
Stage Year LPM MLD(Q) PIPE DATA Excavation Rate per CUM 269.94
Initial 2026 1396.50 0.335 4 (n) DI pipe Rate/M
Excavation
Middle 2041 1858.50 0.446 4 15 Dia. In mm HWC
Type Class Supply Laying& Jointing Rates per M
Ultimate 2056 2474.00 0.594 4 30
80 DI K-9 140 1092.00 0.00 198.24
100 DI K-9 140 1332.00 0.00 207.85
2) pumping main length (M) DI 20.00 150 DI K-9 140 1892.00 0.00 232.82
{ Hs 1.48 200 DI K-9 140 2547.00 0.00 259.14
3)static head of pumps in M
{ Hd 10.41 11.89 250 DI K-9 140 3419.00 0.00 286.81
4)Combined eff. Of pump set 70 300 DI K-9 140 4341.00 0.00 315.83
5)Cost of Pumping unit( perKw.) 25000.00 350 DI K-9 140 5333.00 0.00 346.20
6)Interest Rate (%) 10 400 DI K-9 140 6469.00 0.00 377.92
7) Life of Electric Motor & Pumping set (YEAR) 15 450 DI K-9 140 7719.00 0.00 410.98
8)Energy Charges Per KWH unit in Rs (Ec) 8.50 500 DI K-9 140 9030.00 0.00 445.40
600 DI K-9 140 11831.00 0.00 518.28
700 DI K-9 140 15026.00 0.00 596.57
CALCULATIONS : 1st 15 years 2nd 15years Date for Water Hammer Calculation
1.Average Discharge (Qa) 0.39 mld 0.52 mld k= 2.07E+08 kg/sqm
2.Average hours of pumping for Average Dis. (Xa) 4 hrs 4 hrs E(CI) = 7.50E+09 kg/sqm
3.KW.reqd.at 70%combined eff.of pump set (Kw) 0.434 H1 0.577 H2 E(DI) = 1.70E+10 kg/sqm
4.Average annual energy charges in Rs. (Cr) 12418.16 Kw1 12418.16 Kw2 E(AC) = 3.00E+09 kg/sqm
5.Capitalised Energy charges (Cc) 7.606 Cr1 7.606 Cr2 g= 9.81 kg/sqm
6.Present worth of sum required after 15Yrs for pump 0.239 cost of pump Hmax 1425xV0/g/(1+Kd/Ect)^0.5
{
15Yrs for energy 0.239 Cc2 1425 V0
Table - 1 Velocity & Head losses (in Metres) for defferent sizes pipes
Hmax (1+kd/Ect)
x
g
Total Head losses including 10% Ratio Max
Friction losses for DI pipe in DI K-9 Head
Velocity in M/sec (V0) other losses + Hd + D/s losses in
metres Internal design including
Sl.no. DIA. mm metres Max. Water Pressure in Hmax to
Wall thickness hammer Max. head Kg/cm2 internal
in CT) pressure in Hmax
1st stage 2nd stage 1st stage 2nd stage 1st stage 2nd stage Design
metres (Hmax)
Pressure
1 80 5.399 7.186 6.15 10.44 18.656 23.374 0.0060 727.44 746.096 50 1.49
2 100 3.455 4.599 2.07 3.52 14.172 15.764 0.0060 457.64 471.812 50 0.94
3 150 1.536 2.044 0.29 0.49 12.207 12.428 0.0063 196.42 208.625 50 0.42
4 200 0.864 1.150 0.07 0.12 11.968 12.022 0.0064 106.80 118.767 50 0.24
5 250 0.553 0.736 0.02 0.04 11.916 11.935 0.0068 66.75 78.663 50 0.16
6 300 0.384 0.511 0.01 0.02 11.901 11.908 0.0072 45.43 57.326 50 0.11
7 350 0.282 0.375 0.00 0.01 11.895 11.899 0.0077 32.87 44.769 40 0.11
8 400 0.216 0.287 0.00 0.00 11.893 11.895 0.0081 24.79 36.683 40 0.09
9 450 0.171 0.227 0.00 0.00 11.892 11.893 0.0085 19.33 31.219 40 0.08
10 500 0.138 0.184 0.00 0.00 11.891 11.892 0.009 15.51 27.397 40 0.07
11 600 0.096 0.128 0.00 0.00 11.890 11.891 0.0099 10.58 22.466 40 0.06
12 700 0.071 0.094 0.00 0.00 11.890 11.890 0.0108 7.66 19.548 32 0.06
66
Table - 2 KILOWATTS & COST OF PUMP SETS REQUIRED FOR DEFFERENT SIZE PIPE AND PIPE COST (Rs. In Thousands)
Cost of pipe
1st stage 2nd stage
line(supply+
laying &
Sl.No. DIA. mm KW Pump Cost @ Capitalised Pump cost @ Capitalised
H1 Total Head in Annual Energy H2 Total Head in KW Required + Annual Energy jointing in
Required + Rs.25000.00/ Energy Charges Rs.30000.00/ Energy Charges
(Metre) Charges (Cr1) (Metre) Stand bye Charges (Cr2)
Stand bye KW (Cc1) KW (Cc2) thousand
K-9
1 80 30.546 13.25 331.29 164.56 1251.65 35.264 20.36 610.94 252.89 1923.50 25.80
2 100 26.062 11.31 282.66 140.41 1067.92 27.654 15.97 479.10 198.32 1508.40 30.80
3 150 24.097 10.45 261.34 129.82 987.38 24.318 14.04 421.30 174.39 1326.44 42.50
4 200 23.858 10.35 258.75 128.53 977.60 23.912 13.81 414.28 171.49 1304.33 56.12
5 250 23.806 10.33 258.19 128.25 975.48 23.825 13.76 412.76 170.86 1299.54 74.12
6 300 23.791 10.32 258.03 128.17 974.85 23.798 13.74 412.31 170.67 1298.11 93.14
7 350 23.785 10.32 257.96 128.14 974.61 23.789 13.74 412.14 170.60 1297.58 113.58
8 400 23.783 10.32 257.94 128.12 974.51 23.785 13.74 412.07 170.57 1297.35 136.94
9 450 23.782 10.32 257.92 128.12 974.46 23.783 13.73 412.03 170.56 1297.25 162.60
10 500 23.781 10.32 257.92 128.11 974.44 23.782 13.73 412.01 170.55 1297.19 189.51
11 600 23.780 10.32 257.91 128.11 974.42 23.781 13.73 412.00 170.54 1297.14 246.99
12 700 23.780 10.32 257.91 128.11 974.41 23.780 13.73 411.99 170.54 1297.12 312.45
Table-3 COMPRATIVE STATEMENT OF OVERALL COST OF PUMPING MAIN FOR DIFFERENT PIPE SIZE(Rs. in Thousand)
Cost of pipe line 1st stage 2nd stage
(supply+10%for Grand Total of
Pipe size in Minimum Value CONCLUSION
Capitalised Capitalised capitalised
SL. No. specials+laying & Cost of Capatalised Cost of Pump Capatalised
mm (d) Energy charges Energy charges cost for 30 (In Thousand)
pump sets Total cost (In Sets Total cost (In
jointing in (Cc1) (Cc2) years(In
Thousand) Thousand)
Thousand) DI K-9
thousand
1 80 25.80 331.29 1251.65 1608.74 610.94 1923.50 2560.25 4168.99
2 100 30.80 282.66 1067.92 1381.38 479.10 1508.40 2018.30 3399.68 Most economical size of
3 150 42.50 261.34 987.38 1291.23 421.30 1326.44 1790.24 3081.46 Rising Main Dia. In mm
4 200 56.12 258.75 977.60 1292.48 414.28 1304.33 1774.74 3067.22
5 250 74.12 258.19 975.48 1307.79 412.76 1299.54 1786.42 3094.21 3067.22 200
6 300 93.14 258.03 974.85 1326.01 412.31 1298.11 1803.55 3129.56
7 350 113.58 257.96 974.61 1346.16 412.14 1297.58 1823.30 3169.46
Water Hammer Device not
8 400 136.94 257.94 974.51 1369.39 412.07 1297.35 1846.36 3215.74
required
9 450 162.60 257.92 974.46 1394.99 412.03 1297.25 1871.88 3266.87
10 500 189.51 257.92 974.44 1421.87 412.01 1297.19 1898.71 3320.58
11 600 246.99 257.91 974.42 1479.32 412.00 1297.14 1956.12 3435.44
12 700 312.45 257.91 974.41 1544.77 411.99 1297.12 2021.57 3566.34
Reference : Mannual on Water Supply and Treatment .Ministry of Urban Development , New Delhi
Note: Concidering average and peak flow 300mm dia pipe has been adopted as per velocity criteria.
67
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.
DESIGN OF THRUST BLOCK FOR 300MM DIA PIPE
Dia. of pipe d d= in (cm ) 30
The deviation angle(Degrees) α(in Degree) 90 0.71
Working Pressure (Meter) 13.00
= (Kg/cm2) 1.30
Design Pressure = 1.5 x Working Pressure = (Kg/cm2) 1.95
Say p = (Kg./cm2) 2.00
Density of concrete (Kg./m3) 2400
Soil density assumed (Kg./m3) 1800
Angle of Internal Friction (Degrees) 30
Minimum cover of earth over thrust block (Metre) 0.60
Cohession for sandy soilL ( Kg./m2) 0
Crossectional area A=π/4 x d2 cm2 707.14
Horizontal thrust F=2pA SIN α /2 In Kg. 2000
1.Lateral Resistance to counteract the Horizontal Thrust
Try a Thrust block of size L B H Inn m3
0
for 90 0.90 0.90 0.90 0.729
Weight of Thrust block In Kg.for 900 1749.60
Weight of water in pipe in Kg. 64
Weight of earth 291.60
Total Weight ( in Kg.) 2105.20
Total force available considering frictional resistance of soil.(Total Wt.Xfrictional cofficient
632
i.e.0.3( In Kg.)
2.Lateral Resistance soil against the block.( In Kg.)
Yield=fp=γs* H^2/2*L*1+sinθ/1-sinθ+2CHL√1+sinθ/1-sinθ 1968.30
3.Lateral resistance of soil when the thrust block is free to yield away from the soil mass i.e.,
the portion of projected pipe. (In Kg.)
fa=γs* h*1-sinθ/1+sinθ+2C√1-sinθ/1+sinθ 180
Total Lateral Resitance 2780.30
0
Total Horizontal Thrust for 90 2000
Factor of Safety which should be more than 1.00 1.39 TRUE
Calculation for reinforcement required for thrust block
As per mannual on water supply and treatment of Govt. of India as per
appendix 6.6
ABSTRACT OF QUANTITY FOR 1
Minimum steel for surface reinforcement in Kg. 5.00
NO.
RCC1:1.5:3 Reinforcement
Surface area of thrust block in sqm. 4.86
(m3) (Kg)
Hence steel required for one thrust in Kg. 24.3 0.73 24.3
68
ESTIMATES
69
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Rate Amount
Sl. No. Description Qty. Unit
(in Rs.) (in Rs.)
1 2 3 4 5 6
947927.98
2 Nalla tapping Point No.-2 including screen channel as
per detailed estimate.
919137.16
Total Rs. 1867065.14
Say Rs. (in lacs) 18.67
70
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
1 Excavation in foundation in
ordinary soil (loam, clay & sand)
including lift upto 1.5m and lead
upto 50m watering & ramming of
excavated earth into the
trenches or into the space
between the building and the
sides of the foundation or into
the plinth and disposal of surplus
earth upto a distance of 50m
from centre of trenches.
In Screen Channel
3002 1.50 to 3.00 m 1 3.73 1.93 0.45 3.24 Cum 340.06 1101.63
1 3.73 1.93 0.45 3.24 Cum 340.06 1101.63
In Outlet Chamber
3002 1.50 to 3.00 m 2 4.39 0.70 0.95 5.84 Cum 340.06 1985.51
3 1.20 0.70 0.95 2.39 Cum 340.06 814.10
14.71 Cum
71
Sl. UPJN Rate Amount
Description No. L B H Qty. Unit
No. 2022-23 (in Rs.) (in Rs.)
1 2 3 4 5 6 7 8 9 10 11
4 1029 Ist class brick work in 1:6
cement and local sand in
foundation and plinth including
supply of all materials, labour, T
& P etc. required for proper
completion of the work.
In Screen Channel Walls 1 3.96 0.23 1.78 1.62 Cum
1 3.73 0.23 1.78 1.53 Cum
In Outlet Chamber 2 3.69 0.23 2.41 4.09 Cum
3 1.20 0.23 2.41 2.00 Cum
9.23 Cum
Deduct for
Opening 2 0.60 0.23 0.50 -0.14 Cum
Net Brick Work 9.10 Cum 5487.47 49916.77
72
Sl. UPJN Rate Amount
Description No. L B H Qty. Unit
No. 2022-23 (in Rs.) (in Rs.)
1 2 3 4 5 6 7 8 9 10 11
7 1151 Mild steel or iron work in R.C.C.
work wrought to required shape
as necessaty including bending
for proper completion of work
including supply of steel &
wastage etc.
In Slab 52.38 Kg 101.42 5312.08
Total 947927.98
73
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
1 Excavation in foundation in
ordinary soil (loam, clay & sand)
including lift upto 1.5m and lead
upto 50m watering & ramming of
excavated earth into the
trenches or into the space
between the building and the
sides of the foundation or into
the plinth and disposal of surplus
earth upto a distance of 50m
from centre of trenches.
In Screen Channel
3002 1.50 to 3.00 m 1 3.73 1.93 2.12 15.26 Cum 340.06 5189.88
1 3.73 1.93 2.12 15.26 Cum 340.06 5189.88
In Outlet Chamber
3002 1.50 to 3.00 m 2 4.39 0.70 0.95 5.84 Cum 340.06 1985.51
3 1.20 0.70 0.95 2.39 Cum 340.06 814.10
38.76 Cum
74
Sl. UPJN Rate Amount
Description No. L B H Qty. Unit
No. 2022-23 (in Rs.) (in Rs.)
1 2 3 4 5 6 7 8 9 10 11
4 1029 Ist class brick work in 1:6
cement and local sand in
foundation and plinth including
supply of all materials, labour, T
& P etc. required for proper
completion of the work.
In Screen Channel Walls 1 3.96 0.23 1.87 1.70 Cum
1 2.50 0.23 1.87 1.08 Cum
In Outlet Chamber 2 3.69 0.23 2.65 4.50 Cum
3 1.20 0.23 2.65 2.19 Cum
9.47 Cum
Deduct for
Opening 2 0.60 0.23 0.50 -0.14 Cum
Net Brick Work 9.33 Cum 5487.47 51213.22
75
Sl. UPJN Rate Amount
Description No. L B H Qty. Unit
No. 2022-23 (in Rs.) (in Rs.)
1 2 3 4 5 6 7 8 9 10 11
7 1151 Mild steel or iron work in R.C.C.
work wrought to required shape
as necessaty including bending
for proper completion of work
including supply of steel &
wastage etc.
In Slab 52.38 Kg 101.42 5312.08
Total 919137.16
76
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
77
UPJN Rate Amount
Sl. No. Description Qty. Unit
2022-23 (in Rs.) (in Rs.)
1 2 2 3 4 5 6
6 DSR 2021 Disposal of surplus earth with municipal limits upto
Item 1.1.2 a distance of 8km as per direction of E/I. 250.54 M3 329.50 82554.45
1.50 to 3.00 m
381+3070 250mm dia
+3205 135.00 M 516.08 69670.83
387+3194+ 350mm dia
3205 10.00 M 1420.86 14208.63
3.00 to 4.50 m
381+3070+ 250mm dia
3206 74.00 M 548.08 40557.75
387+3196+ 450mm dia
3206 70.00 M 2012.35 140864.26
78
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
TIMBERING
Open Timbering Close Timbering
NAME
SL. No.
OF WORK 0.0 TO 1.50 1.50 to 3.0 TO 6.0 6.0 TO 9.0 9.0 TO 12.0
M 3.00M M M M
1 Timbering 391.91 432.00 85.03 0.00
LAYING OF SEWER
350 0 10 0 0 0 0 10
450 0 0 70 0 0 0 70
TOTAL 0.00 145.00 144.00 0.00 0.00 0.00 289
79
Boxing of Joint
Centering
Thickness Area of Quantity Total Total Qty of
Length of No. of Joint &
Dia of Pipe of Pipe Box Per Joint Quantity Steel
Sewer (In Nos.) Shuttering
(In mm) (InSqm) (In Cum) (In Cum) in kg
in sqm
250 209 30 84 0.48 0.22 18.13 1423.30
450 70 75 28 0.80 0.40 11.16 876.34
TOTAL 279 112 29.29 2299.64 72208.76
MAN HOLES
BRICK CIRCULAR M.H. BRICK CIRCULAR M.H. RCC CIRCULAR M.H. CIRCULAR M.H.
DIA. 900 mm DIA.(1200mm) DIA.(1500mm) DIA. (1500 mm)
0.0 to 1.67 (M) 1.657to 2.30 (M) 2.30 to 4.95 (M) 4.95 to 9.0 (M)
80
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Sl. UPJN
Rate Amount
No. 2022- Description No. L B H Qty. Unit
(in Rs.) (in Rs.)
23
1 2 3 4 5 6 7 8 9 10 11
In ordinary soil
3001 0.00 to 1.50 m 1 10.02 4.90 0.26 12.77 Cum 269.94 3445.91
3002 1.50 to 3.00 m 1 9.52 4.40 1.50 62.83 Cum 340.06 21366.65
3003 3.00 to 4.50 m 1 9.02 3.90 1.50 52.77 Cum 427.41 22553.14
3004 4.50 to 6.00 m 1 8.52 3.40 1.50 43.45 Cum 500.04 21727.74
Total 171.82
81
Sl. UPJN
Rate Amount
No. 2022- Description No. L B H Qty. Unit
(in Rs.) (in Rs.)
23
1 2 3 4 5 6 7 8 9 10 11
In Slab 1 2.00 2.10 0.20 0.84 Cum
Total 42.92 Cum 12047.63 517133.92
82
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Abstract of Cost of Sump Well At MPS, Size- 6.00 m Dia x 7.89 m deep
2 AOR RCC M-30 work with cement, coarse sand and graded
stone aggregate 20mm nominal size, excluding supply
of the reinforcement and its bending but including its
fixing and binding with 0.5mm thick binding wire (to be
supplied by the contractor) & including necessary
centering and shuttering, supply of all materials labour,
T&P etc. required for proper completion of work.
In Wall Shoe, Base, Slab, Foundation of Pump etc. Cum 111.59 14634.01 1633019.71
83
UPJN Rate Amount
Sl No Item Description Unit Quantity
2022-23 (In Rs.) (In Rs.)
1 3 4 5 6 7
6 AOR Sinking of well in ordinary soil below spring level,
Attached including supply - erection and working of all plants
required as well as loading and unloading of weight
and bailing and pumping out water with machinery or
otherwise as required including MS form work of curb
as shown in drawing and disposal of surplus earth as
per direction of E/I.
3.00 - 6.00m M 3.00 171343.00 514029.00
6.00 - 9.00m M 1.89 231972.00 438427.08
84
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Detail Measurement of Sump Well At MPS, Size- 6.00 m Dia x 7.89 m deep
1 3 4 5 6 7 8
85
Sl No Item Description No. L W D/H Quantity Unit
1 3 4 5 6 7 8
@ 44.20 Kg/m 309.40 Kg
Hand Rail 1 50.82 50.82 m
@ 2.58 Kg/m 131.12 Kg
Total 1475.77 Kg
86
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN AT
PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Sl. No. UPJN Description of Item Units. Qty. Rate (Rs.) Amounts
2022- (Rs.)
23
1 2 3 4 5 6
4 Carting laying jointing and fill testing from store (upto 8km)
the following sizes of D.I. Pipes (Class K-9) and specials to
the site of work, lowering them in to trenches and laying
true to alignment and gradient including testing of pipeline
(but excluding cost of trenching and cuting of pipes etc. for
making of lengths but including making joint.
5 1025 RCC work with cement, coarse sand and graded stone
aggregate 20mm nominal size in proportion of 1:1.5:3
excluding supply of the reinforcement and its bending but
including its fixing and binding with 0.5mm thick binding
wire (to be supplied by the contractor) & including
necessary centering and shuttering, supply of all materials
labour, T&P etc. required for proper completion of work.
87
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN
AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
Sl. No. Description of Item Nos. Length Width Height/Dept Qty. Units.
(m) (m) h (m)
1 2 3 4 5 6 7 8
88
Sl. No. Description of Item Nos. Length Width Height/Dept Qty. Units.
(m) (m) h (m)
1 2 3 4 5 6 7 8
6 Mild steel or iron work in R.C.C. work wrought to
required shape as necessaty including bending for
proper completion of work including supply of steel
& wastage etc.
Thrust Block 300mm dia 1 @ 24.30 Kg. 24.30 Kg.
24.30 Kg.
89
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
90
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING DRAIN
AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
1.50 to 3.00 m
387+3194+ 350mm dia
3205 60.00 M 1420.86 85251.60
91
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR EXISTING
DRAIN AT PURKAZI (NP), MUZAFFARNAGAR, U.P.(UNDER SBM-2.0 PROGRAMME)
SUMMARY OF QUANTITY
Total Wt. of
Depths 0.0 TO 1.50 1.5 TO 3.0 3.0TO 4.5 4.5TO 6.0 6.0O 7.5 7.5 TO 9.0 Total
Steel (In kg)
Grannular
0.00 6.00 0.00 0.00 0.00 0.00 6.00
Bedding in m3
Total Bedding 0.00 6.00 0.00 0.00 0.00 0.00 6.00 0.00
LAYING OF SEWER
300 0 0 0 0 0 0 0
350 0 60 0 0 0 0 60
400 0 0 0 0 0 0 0
450 0 0 0 0 0 0 0
TOTAL 0 60 0 0 0 0 60
92
Estimate of MPS Site Development, Buildings & Other Allied Works
0
1 2 3 4 5 6
1 Unit Est. Construction of Staff Quarter as per detailed estimate. 1 No. 1484000.00 1484000.00
4 Unit Est. Fixing 3.6m wide iron gate and with pillars. As per Unit
Estimate. 1 Each 54500.00 54500.00
93
ESTIMATE OF E&M WORKS
94
OFFICE OF THE EXECUTIVE ENGINEER,CONST.DIVISION(E/M), U.P. JAL NIGAM
(NAGRIYA), SAHARANPUR
Assistant Engineer
95
OFFICE OF THE EXECUTIVE ENGINEER, CONST.DIVISION(E/M), U.P. JAL NIGAM (NAGRIYA),
SAHARANPUR
A Electrical Works
1 H.T.Panel( Comprising with 1 -I/C and 2 -O/G.
SITC of Indoor Type Floor mounted HT Panel with 11 KV, 630 Amps 3
phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by
System Integrator of VCB Manufacturer as per IEC 62271-1,100,200
Standard made from Powder painted pre-fabricated, CRCA sheet steel
/High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication
shall be done through CNC turret press and CNC bending machine
having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for
3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR
clasification with suitable capacity of bus bar connected with the
incoming and outgoing panels as per given details-
Supply installation testing and commissioning of Incoming Panel
comprising of following:
- VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCB
operationg mechanism should be of M2 duty for minimum 10000 mechanical
operation.
- Closing & tripping coil of VCB should be of continious rating to achive
minimal failure.
- Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA;
Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load
requirement)
- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should
included in
be floor mounted and to be connected from the back side of the panel. 1 Sets 0.00
STP costing
- Numerical relay (should be VCB manufacturer's own make) having
protections of 50,51, 50N,51N,TCS. The relay shall have programable 4
digital Input , programable 6 Digital Output and programable 4 nos. LED at
HMI.
- Ammeter with Selectorswitch and Volt meter with Selector switch
- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,
KVAR, PF, KWH, KVARH, KVAH, A,V etc.
- Trip circuit supervision relay (feature of numerical relay)
- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip,
TCS healthy etc., Space heaters
- Power Pack (230V AC- 110V DC) and 8/12 window Annunciator.
96
Supply Installation Testing and Commissioning Outgoing Panel
comprising of following:
- VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCB
operationg mechanism should be of M2 duty for minimum 10000 mechanical
operation.
- Closing & tripping coil of VCB should be of continious rating to achive
minimal
failure.
- Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA;
Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load
requirement) included in
2 Sets 0.00
- Numerical relay (should be VCB manufacturer's own make) having STP costing
protections
of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,
programable 6 Digital Output and programable 4 nos. LED at HMI.
- Ammeter with Selectorswitch and Volt meter with Selector switch
- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,
KVAR, PF, KWH, KVARH, KVAH, A,V etc.
- Trip circuit supervision relay (feature of numerical relay)
- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip,
TCS healthy etc., Space heaters
- Power Pack (230V AC- 110V DC)
2 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per
PWD specification for electrical Works for working voltage 11 K.V.(E) in
existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on 0.00
existing cable trays or on surface etc. including making necessary connection,
testing etc. Ref.23.7.3 (Rajasthan PWD BSR, 2022)
3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) included in
60 Meter 0.00
Ref.13.1.2 (PRE BSR 2022) STP costing
Trench making and covering of trench in all respect. Ref.E130300, E130400, included in
60 Meter 0.00
E130500 and E130700 and (PRE BSR 2021) STP costing
SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) included in
4 Sets 0.00
Ref.13.12.1.3 (PRE BSR 2021) STP costing
11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down included in
2.5 sqm. 0.00
Voltage 45 KV Ref.8.10.2 (PRE BSR 2022) STP costing
3 Transformer: 200 KVA with Off -LTC (+5% to - 10% @ 2.5%) :
S I T C of star rated Copper wound distribution Transformer of following
rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN
Cooled & losses as defined as per IS 1180 part I 2014. including standard
accessories like conservator, silica gel breather, radiator, fins, HT cable box & included in
2 Nos 0.00
LT cable boxes, temperature rise in winding/oil 35-40 degree C & 40-45 STP costing
degree C for above 800 KVA, ISI marked drain valve, Dial type Temperature
gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint,
including carrying of pre-commission Testing & Charging of Transformer
complete in all respect.
4 L.T. Panel
97
SITC of 0.415 kV IP 54 protected L.T. control panel for pumping plant-L.T. control
panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per
details given below-(A) 2 Nos incoming panels and 1 outgoing panel, each
consisting of following items -(i) 4 pole MCCB With Thermal Magnetic release
,400Amp , 50 kA, adjustable O/L & adjustable S/C setting- 1 No.(ii) C.Ts of
suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with
selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)
Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay&
one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for
phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite
panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 1 Set 650297.20 650297.20
With Thermal Magnetic release ,63 Amp , 25 kA, adjustable O/L & adjustable S/C
setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of
suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start /
stop device according to level in the sump- 1 No.(v)Indicating
lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels
for miscellaneous works, each consisting of following items – (i) MCB of 40 A
capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch -
1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole MCCB
With Thermal Magnetic release ,100 Amp , 25 kA, adjustable O/L & adjustable S/C
setting Panel for DG set incoming - 1 NO.(G)Rubber resistance sheet and fire
extinguisher complete in all respect.
5 LT Cable laying and jointing
Power and control cable-Supply of 50 sq. mm 3.5 core cable - 1Run required for 1 Job 69,672.00 69672
power from each Transformer to each L.T. panel , 25 sq. mm X3 core-1 run cable
for power from starters to Motor including lugging and jointing, laying, trench
excavation and compaction as well as complete cabling of automation system etc.
complete in all respect.
6 Earthing
Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of
size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground
level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories
like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty
weather proof poly-propylene earth pit chamber with lockable Jam free
lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to
4 Nos 15144.00 60576.00
260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and
embodying the pipe complete with alternate layers salt and coke/
charcoal, testing of earth resistance for value of 5 ohms or less as
required & must record by engineer in charge during site visit and ensure
to enter in measurment book. All as per pre approved by Engineer in
charge. Ref.14.3 (PRE BSR 2022)
Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B '
class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with
perforated holes of 12 mm dia ,including all accessories like nut, bolts,
reducer, nipple, wire meshed funnel, and Heavy duty weather proof
poly propylene earth pit chamber with lockable Jam free lid suitable for safe
working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom
2 Nos. 3643.00 7286.00
Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe
complete with alternate layers salt and coke/ charcoal, testing of earth
resistance for value of 5 ohms or less as required & must record by
engineer in charge during site visit and ensure to enter in measurment
book.All as per pre approved by Engineer in charge. Ref.14.1 (PRE BSR
2022)
Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical
run in ground/surface/recess including riveting,soldering, saddles, Jointing
shall be done by overlapping and with 2 set of GI nut bolt & spring washer 120 Mets. 184.00 22080.00
spaced at 50cm making connection etc.(20meter for each earthing)
Ref.E140611 (PRE BSR 2021)
7 Charges of Electrical safety Clearance
Expenditure on B&L Form, Challan etc. 1 Job 10000.00 10000.00
8 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing
1 Job 120000.00 120000.00
AMRUT Work Aligarh Sewarage)
9 STARTER PANEL
98
i SITC of Compraising of Soft Starter, suitable to meet the basic requirement of
motor protections and suitable to run 25 HP motor (To be fixed in composite 2 Nos 85000.00 170000.00
panel of LT Panel)- Ref. UP Jal Nigam E&M SOR, 2020
B Mechanical Works
10 (i) Pump
The submersible non clog pumpset should be single stage having two vanes
enclosed impeller coupled with submersible motor of 25 HP Rating 400 Volt
±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw
sewage with an specific gravity 1.03 having following construction of material
with 10 Met. cable as offered. (2W+2S)
Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.
Impeller-Stainless steel CF-8M
shaft-stainless steel AISI-410
Discharge of pump= 3560 lpm
Total Head= 17 M
Speed=1450 RPM
Quantity of pumps. 4 Nos. 351986 1407944
iii Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with 4 Sets 17600 70400
D/Bow shackle @ 5%
11 Main piping and Valves.
Main piping and valves 200 mm dia delivery, 250 mm dia common header
line.
Valves.
Confirming to IS 780/2906 or as applicable
PN rating- 1.0
Type of liquid to be handled-potable water
Material of construction
Body-CI,IS-210 grade FG 200
Wedge-CI IS210 Grade FG200
Spindle-Stainless steel AISI304
Sheet and face Ring-SS ASTMA 743 Grade C.F.8 M
Channel& Shoe-S.S.AISI,.304
Drain& Air plug-S.S.AISI.304
Bushing arrangement-Halprene on bronze
Rivets-AISI:304
Fasteners-MS
Motor Operated Sluice Valves
Sluice Valve 200 mm dia (Ref. UP Jal Nigam E&M SOR, 2020) 4 Nos. 150000.00 600000.00
Sluice Valve 250 mm dia (Ref. UP Jal Nigam E&M SOR, 2020+ previous
1 No. 190000.00 190000.00
sor)
Reflux Valve
Reflux valve 200 mm dia N.B.(Ref. Attached SOR of IVC with CE (E/M), UP
4 Nos. 47017.00 188068.00
Jal Nigam Letter)
Pipings
99
Note : Regarding the size of pipes, Tee, Bend etc, contrctor is required to
designed them self and may got it approved by the department before
execution of works along with layout drawing taking 200mm pipe 40 m and
250 mm pipe 15m .(Ref.UPJN SOR, 2022)
200 mm, K9 delivery pipes for all six pumping plant 40 m 2547.00 101880.00
250 mm, K9 common header pipes 10 m 3419.00 34190.00
Specials like bend, tee, D Joint etc.@ of 5% 6803.50 6803.50
Nut Bolt, Washer Rubber packing etc @ of 5% 7143.68 7143.68
INSTALLATION, TESTING & COMMISSIONING
Installation & Commissioning of all 4 Nos. Pump set,Piping & Valves as
267682.92
mentioned in above @10% of supplied items.
12 Level Transmitter (For Hi-Lo cut-off & alarms)
SITC of Radar type level transmitter shall be provided in the pump
house for measuring the sewage level in wet sump. The indicator shall
1 Set 120000.00 120000.00
be digital type showing depth in meters and shall be capable for input
to PLC or HMI touch sceen for display.
13 Electro magnetic flow meter
SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to
30 MLD flow to be fitted in 250 mm dia main header line.(Ref. upjn SOR) 1 No. 225000.00 225000.00
14 E.O.T. Crane
SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single
girder electrically operated rectangular over head travelling crane with 6 m lift
complete with wire rope hoist, class II duty, all three motions electrically 1 No 671214.00 671214.00
operated by suitable rating motor IP 54, control panel and down pendent
control block. (Ref. MJP SOR, 2022)
15 Chequerred plate and guards
SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to
cover properly and M.S. grill and M.S. guard over all pipes ducts and other
235.17 kg 101.41 23848.59
point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate)
(3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm.
16 PAINTING
Painting of all pumps piping and valves with two coat enamel paint. (Ref.UP
4 Jobs 3000.00 12000.00
Jal Nigam E&M SOR, 2019)
17 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR,
2019)
Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 1 Job
20000.00 20000.00
IPS Campus with Solar Panel and LED Light of 3 sets. 1 Job 90000.00 90000.00
Sub Total B( Rs in lacs) 41.07
100
SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA
sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop
commands, control Relays , Ammeter & Voltmeter with selector switches,
Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole included in
19 1 Set. 0.00
MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, stp costing
operator interface panel complete in all respect. ( pwd bsr 2022- 23.29.3)
Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class
G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated
holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple,
wire meshed funnel, and Heavy duty weather proof poly propylene earth pit
chamber with lockable Jam free lid suitable for safe working load 5000 Kg or included in
20 2 Job 0.00
more of size Top Dia. 225 to 260 mm, Bottom stp costing
Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe
complete with alternate layers salt and coke/ charcoal, testing of earth
resistance for value of 5 ohms or less as required.( pwd bsr 2022- 14.1)
Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size
600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with
20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut,
bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-
propylene earth pit chamber with lockable Jam free lid suitable for safe included in
21 2 Job 0.00
working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia stp costing
300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete
with alternate layers salt and coke/charcoal, testing of earth resistance for
value of 5 ohms or less as required.( pwd bsr 2022- 14.3)
23 Providing and Laying cable for DG Set to Panel 185 sq mm X 3.5 core x 2 included in
50 Met 0.00
run( armored aluminium )-(pwd bsr-2022-item no 11.2.12.2) stp costing
24 Supplying and making one end termination with heavy duty brass compression
gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per
IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape
as per PWD specification for electrical Works etc for following size of included in
4 Jobs 0.00
Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable stp costing
of 1100 volt grade for 3.5 core X 185 sq mm.(pwd bsr-2022-item no 12.1.24)
101
28 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable 1 No. 30000.00 30000.00
to transfer & gather data from remote sites to control stations all accessories included
with signal enhancer antenna made for pumping plant internet charges as specified
in tender technical specification.
29 CE/UL certified intellignet Smart Energy Meter 1 No. 25000.00 25000.00
30 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-
1 & IEC-60947-b-1)
31 160 AMP rating 1 No. 70000.00 70000.00
32 Electronic sensor type pressure measuring device suitable for pressure 5 Nos. 50000.00 250000.00
measurements of sewage flow in delivery and common header line. The
material of construction of housing and other parts in contact with sewage
shall be of stainless steel. These shall be of required protection category and
complete with signal transmitting device and digital pressure indicator.
33 CE/UL Certified Surge protector for control panel. 1 No. 15000.00 15000.00
34 CE/UL Certified 7" HMI touch screen suitable to communication with PLC/RTU for 1 No. 30000.00 30000.00
local display & control ofp rocess parameters.
35 Security Survillance IP Camera with recorder 1 No. 20000.00 20000.00
36 Installation, commissiong & testing of above automation work 1 No. 20000.00 20000.00
37 Trial run for 3 month period for IPS 1 No. 15000.00 15000.00
Assiastant Engineer
102
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR
PRADESH JAL (NIGAM, NAGARIYA), SAHARANPUR
Assistant Engineer
103
OFFICE OF THE EXECUTIVE ENGINEER,
CONST.DIVISION(E/M), U.P. JAL NIGAM (NAGRIYA),
SAHARANPUR
Assistant Engineer
104
OFFICE OF THE EXECUTIVE ENGINEER,CONST.DIVISION(E/M), U.P. JAL
NIGAM (NAGRIYA), SAHARANPUR
Assistant Engineer
105
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR PRADESH JAL (NIGAM, NAGARIYA), SAHARANPUR
Note:- However actual expenditure will be done after getting electricity bill of UPPCL.
Assistant Engineer
106
Rate Analysis of LT Panel and Cabling Work at Purkazi MPS, MUZAFFARNAGAR
Sno. Description of Work Qty. Unit Unit Rate Amount Reference
A Design, Supply, Installation, Testing and Commissioning of 415 V, Indoor Switch board for pumping station
1 SITC of 4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having
following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -
2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load
interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable
for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push
(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation
voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making
connections etc. (For Sr. No. 2,3&4)
2 4 pole MCCB with Thermal Magnetic release ,suitable capacity up to 400 Amp , 50 kA, adjustable O/L & adjustable S/C setting - 3 Nos 40781 1,22,343 Rate as per rajasthan
2incoming & 1 outgoing.( 600 mm x600 mm x 1000 mm) pwd electric BSR-2022
SOR7, item no 9.3.4.3
3 4 pole MCCB with Thermal Magnetic release ,suitable c apacity up to 400 Amp , 50 kA, adjustable O/L & adjustable S/C setting - 1 No 40781 40,781 Rate as per rajasthan
1 No for DG Set . ( 600 mm x600 mm x 1000 mm) pwd electric BSR-2022
SOR7, item no 9.3.4.3
4 4 pole MCCB With Thermal Magnetic release,suitable capacity up to 63 Amp, 25 kA, adjustable O/L & adjustable S/C setting 4 Nos 7112 28,448 Rate as per rajasthan
(.6 X .6 X 2 + 1 X .6 X 4) pwd electric BSR-2022
SOR7, item no 9.3.3.2
5 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as 3 Nos 1738.4 5,215 Rate as per rajasthan
per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 pwd electric BSR-2022
SOR7, item no 6.1.4.3
2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination
capacity of 35sq.mm. ,conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets,
minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making
connections, testing etc. for spare panels like lighting, flow meter etc.( 4 pole 40 A MCB) (.6 X .6
X 2 + 1 X .6 X 4)
6 SITC of free standing floor mounted dust and vermin proof compartmentalised cubical panel . Thickness of sheet shall not be less 34.32 Sq M 5975 2,05,062 Rate as per rajasthan
than 1.6 mm up to 600 mmlength / width of any compartment and be of 2.0 mm above 600 mm. pwd electric BSR-2022
SOR7, code no 8.1
Load bearing structure shall be of 2.0 mm thick sheet supported bybase M.S. channel if required . Side walls and cable alley
compartmentshaving bolted type doors with / without detachable extension type structure .panel shall be dulytreated for derusting
in 7 tank process withdephosphating and with powder coating of minimum 70 microns on
both side of panel in desired shade The panel having PU/ Neoprenerubber gasket of not less than 3mm thickness ,required
hardware,separate detachable gland plate M.S. base channel (min75mm) ,hinged door with locking arrangement for
equipment/switchgear complete in all respect,
for 100 A MCCB - 4 X (.6X .6 X 2 + 1 X .6 X 4)= 12.48 SQ M
for 32 A MCCB - 4X (.6 X .6 X 2 + 1 X .6 X 4)=12.48 SQ M
for 40 A MCB - 3 X (.6 X .6 X 2 + 1 X .6 X 4)= 9.36 SQ M
7 Supplying and fixing of Aluminium (IEC 60028) bus bar as per PWD specification for electrical Works, by means of SMC / DMC 300 Kg 542 1,62,600 Rate as per rajasthan
type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size pwd electric BSR-2022
SOR7, item no 8.2.1
and colour coding with heat shrinkable PVC sleeves( 25 Kg for each MCCB, MCCB and MCB Compartment) (250 Kg for LT
Panel and 25 Kg for APFC Panel)
9 Volt Meter upto 500 Volt with Inbuilt Selector Switch 3 Nos 1689 5,067 Rate as per rajasthan
pwd electric BSR-2022
SOR7, item no 8.3.3
10 Ammeter with Inbuilt Selector Switch 12 Nos 1039 12,468 Rate as per rajasthan
pwd electric BSR-2022
OR7, item no 8.3.4
107
11 Frequency Meter 3 Nos. 1172 3,516 Rate as per rajasthan
pwd electric BSR-2022
OR7, item no 8.3.7
12 Providing & Fixing of BIS approved Current Transformer as per PWD specification for electrical Works ,ISI marked as per IS 0
2705-1992/ conforming to IEC 60044-1, with secondary terminal of CT shall be brought out suitable to a terminal block which
shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc.
as required Current transformer Resin Cast Wound Primary / Ring Type Tape Wound as per IS 16227 with, Accuracy Cl, CT ratio
and burden as specified. ISF<=5, Cu cross section of secondary wire 1.5sqmm (minimum), including all necessary support in
existing panel including connection etc. as required .
C T Class 1, Ratio upto 150/5, Burden 5 VA 12 Nos 614 7,368 Rate as per rajasthan
pwd electric BSR-20212
SOR7, item no 8.4.1.1
13 Providing & Fixing of ISO certified company made UL listed , IP 65 110/220 V, unibody LED Indicating lamp IEC 60947 all 12 Set 170 2,040 Rate as per rajasthan
red,yellow and green for 1 panel. (8 Nos for LT Panel and 1 Nos. for APFC Panel) pwd electric BSR-2022
SOR7, item no 8.8.1
14 Providing & Fixing of IP 51 Multi function meter as per PWDspecification for electrical Works, ISI marked (IS 16444)/ 3 Set 3530 10,590 Rate as per rajasthan
Confirming toIEC 61557 & IEC 62052 with LCD/ LED 3/4 line display capable ofmeasuring electrical parameters like V, I, F, PF, pwd electric BSR-2022
SOR7, item no 8.3.5
KW, Kva, Kvar, Kwh,Kvah, Kvarh display with 1A/5A CT input for LV/ HV network, with RS 485 communication port etc
15 Providing & Fixing of Electrical insulating rubber matts as per PWDspecification for electrical Works, ISI marked confirming to
IS: 15652 /2006 with one side anti skid abberation marks and pasting the matwith synthetic rubber adhesive as required
3.3 KV, class A 2 mm thick with proof voltage 10 KV AC (rms) and Break Down Voltage 30 KV AC (rms) 5 Sq M 1498 7,490 Rate as per rajasthan
pwd electric BSR-2022
SOR7, code no 8.10.1
16 Providing & Fixing of self healing IP20 MPP type shunt capacitor (banks) as per PWD specification for electrical Works, ISI 21 Kvar 374 7,854 Rate as per rajasthan
marked IS:13340-41 / conforming to IEC :831-1&2 OR IEC : 60831-1& 2 in existing panel or parallel with load terminals , the pwd electric BSR-2022
SOR7, item no 8.11.1
capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than
0.0025 at 50 Hz and total wattage loss less than 0.35 Watt per KVAR. Min over current capacity 1.8 times rated current & peak
inrush current min. 250 times of rated current, including making connections, testing etc. as required
17 Providing & Fixing of IP54 on front microprocessor based three phase sensing power factor correction relay , IEC / EN 61000-6- 1 No 14995 14,995 Rate as per rajasthan
(2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted pwd electric BSR-2022
SOR7, item no 8.13.1
power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor
switching status, alarm output for under current, over current, insufficient compensation, communication interface with RS 485,
indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter
like KW, KVA, KVAR, VTHD, ITHD, metering facility as required complete in all respect ( 6 to 8 stage).
18 Cubical panel for capacitor banks (8X .6 X .6 X 2 + 1 X .6 X 4 X 8 ) SQ M 24.96 Sq M 5975 1,49,136 Rate as per rajasthan
pwd electric BSR-2022
SOR7, code no 8.1
108
4 Providing and covering of existing cable by second class brick of minimum 32 mm thick and 250 mm wide in complete running 40 Met 44 1,760 Rate as per rajasthan
length of trench. pwd electric BSR-2021
SOR7, item no E110400
5 Labour charges for excavation of 30cmX75cm size trench in loose soil including refilling of excavated earth, compaction of earth, 40 Met 59 2,360 Rate as per rajasthan
making good the same complete as required. pwd electric BSR-2021
SOR7, item no E110500
6 Laying charges for cable through manual boggi by making pit at regular interval and repairing the pit after laying of cable with PCC 40 Met 105 4,200 Rate as per rajasthan
as required pwd electric BSR-2021
SOR7, item no E110900
7 Laying and fixing of 25sqmm.X3 Core 1 run power Cable of 1.1 KV grade of following size on wall/ cable tray with saddles/MS 20 Met 12 240 Rate as per rajasthan
flat clamp etc. pwd electric BSR-2021
SOR7, item no E110801
8 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy 4 Jobs 777 3,108 Rate as per rajasthan
duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification pwd electric BSR-2022
SOR7, item no 12.1.23
for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100
volt grade for 3.5 coreX 150 sq mm X1 run
9 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy 8 Jobs 216 1,728 Rate as per rajasthan
duty copper (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for pwd electric BSR-2022
SOR7, item no 12.1.13
electrical Works etc for following size of Un Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of
1100 volt grade for 3 coreX 25 sq mmX 1 run
SUB TOTAL 1,19,796.00
TOTAL (A+B) 9,04,769.20
Assistant Engineer
109
DESIGN OF PUMPING PLANT OF MPS
1 2 3 4 5 6
1 When peak flow is passing through the
rising main 2 3560 7120 0.118667
2 When average flow is passing through the
rising main 1 3560 3560 0.059333
3 When minimum flow is passing through
the rising main. 1 3560 3560 0.059333
Assistant Engineer
110
TECHNICAL STATEMENT NO.2
MPS
Sl.No. DATA OF PUMP Year 2041
Total Head in m 17
Quantity 4(2W+2S)
Type of Pumps Non clog submersible
power connection Independent feeder
1 Calculation of Capacity of motor
Discharge of Pump in lpm 3560
Total Head in m 17
Sp.gr. Of sewage 1.03
WHP 13.85
Efficiency of Pump 70%
Pump input in HP 19.8
Pump input in KW 14.8
Efficiency of motor 86.0 %
HP input to motor 23.0
KWI to motor 17.2
Considering 20% margin of as per jal nigam guidelines rating 17.72
of motor required in KW
Next commercial rating of motor in KW 18.5
Operating voltage of motor 400±10%
2 Calculation for capacity of Diesel Generating set Total
required load
During peak hours
No of pumps 2 Nos
Capacity of one pump 18.5 kw
Load of peak running pumps in kw 37 KW
37 KW
Load of light and fan, and miscellaneous works 5 KW
Sub Total 42 KW
During Average Hours
No of pumps 1 No
Capacity of one pump 18.5 KW
111
Load of 1 No pump 18.5 KW
18.5 KW
Load of light and fan, and miscellaneous works 5 KW
Sub Total 23.5 KW
During non peak hours
No of pumps 1 No
Capacity of one pump 18.5 KW
load of 1 Nos Pump 18.5 KW
18.5 KW
Load of light and fan, and miscellaneous works 5 KW
Sub Total 23.5 KW
Capacity of D.G. Set in KVA(taking power factor as 0.8 and
30% margin)
Total Load on STP 57 KW
During peak hours 161 KVA
During Average Hours 131 KVA
During non peak hours 131 KVA
112
During peak hours 161 KVA
During Average Hours 131 KVA
During non peak hours 131 KVA
Hence capacity of Transformer is being proposed (As per 200 KVA
standared rating)
Quantity 2Nos(1W+1S)
Assistant Engineer
113
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR
PRADESH JAL (NIGAM, NAGARIYA), SAHARANPUR
Assistant Engineer
114
OFFICE OF THE EXECUTIVE ENGINEER,
Assistant Engineer
115
OFFICE OF THE EXECUTIVE ENGINEER, CONST. DIVISION (E/M), UTTAR PRADESH JAL (NIGAM, NAGARIYA), SAHARANPUR
MPS & STP ELECTRICITY CONSUMPTION CHARGES FOR 3 MONTH TRIAL RUN
Sr. Year Flow Peak Pump Pump No of No of Electricity Load for Runnin Electricity STP Rate of Cost of Electricity Fixed Electricity Total Cost Per Total Cost for 1
No. given in Flow Rating Discharge Pump working consumpti Mechanical g Hrs consumption Consuption in Electricity Per Month Charges Duty Per Month Year ( In Rs)
base in KW Capacity in Workin Hour Per on in KWH Screens, of (J) in KWH Per kwh Charges (30*(I+L+M)*N) (75% of Month (O+P+R)
year MLD g day Per Day Light, Fan, Day for Per KWH KVA * (O+P) *7.5%
(C/F*24)/ (E*G*H) Conveyer etc. screens and 337.50)
G (In KW) lightings etc
(J*K)
A B C D E F G H I J K L m N O P R T U
1 2023 4.00 10.00 18.5 4.22 2 11.37 420.85 3 12 36 655 8.6 286858.09 32906.25 23982.33 343746.67 4124960.05
Note:- However actual expenditure will be done after getting electricity bill of UPPCL.
Assistant Engineer
116
UNIT ESTIMATE
117
Analysis of Rates For Perforated Slab (In Sqm)
UPJN Amount
S.L ITEMS No. L B H QTY. Unit Rate
2022-23 (In Rs.)
1 2 3 4 5 6 4 5 6
118
ANALYSIS RATE OF GRANUAL BEDDING
1:1:2 (1 Coarse Sand: 1 graded stone aggregate 20mm nominal size: 2 graded stone aggregate 40mm nominal
size) As per UPJN
119
ANALYSIS RATE OF RCC M-30
120
ABSTRACT OF COST R.C.C MANHOLE,1520.X 4.95 M DEEP
UPJN
SL.NO. DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT
2022-23
1 2 3 4 5 6 7
1 (b) 1006 Extra for every additional lift of 1.5m or part thereof
in.
All kinds of soil.
1.50 to 3.00 m (1 x 19.03) M3 19.03 35.31 671.91
3.00 to 4.50 m (2 X 14.59) M3 29.18 35.31 1030.32
4.50 to 6.00 m (3 X 7.88) 23.63 35.31 834.25
3 1011 Concrete with 4cm guage stone ballast, local sand &
cement in proporation of 8:4:1 in foundation including
supply of all materials, labour T&P etc. required for
proper completion of the work.
M3 0.81 4587.10 3707.68
121
UPJN
SL.NO. DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT
2022-23
1 2 3 4 5 6 7
In Raft 1.43
In Walls 3.58
In Ring Beam 0.505
In Cover Slab 0.351
3
M 5.86 12047.63 70636.53
122
MEASUREMENT OF R.C.C MANHOLE,1520 mm DIA RCC CIRCULAR MANHOLE
4.95 m Deep
123
Sl. No. DESCRIPTION OF ITEM NO L B H QTY. UNIT
1 3 4 5 6 7 8 9
4 RCC with cement, coarse sand & 20mm
gauge approved stone ballast in
proportion of 1:1.5:3 in raft foundation,
footing, beam & slab excluding supply of
reinforcement and its bending but
including its fixing and binding the same
with 0.50mm thick binding wire in
position & necessary centering and
shuttering including curring and supply
of all materials, labour, T&P etc.
required for proper completion of the
work.
In Raft 0.785x(1.52+0.7+0.40+0.40)^2 X0.20) 1.43 cum
In Walls
0.0-1.5 m BGL 1 3.14 x(1.520+0.15) x 0.15 X 0.45 0.35
1.5-3.0 m BGL 1 3.14 x(1.520+0.15) x 0.15 X 1.50 1.18
3.0-4.5 m BGL 1 3.14 x(1.520+0.15) x 0.15 X 1.50 1.18
4.5-6.0 m BGL 1 3.14 x(1.520+0.15) x 0.15 X 1.50 1.18
Sub total 3.89 cum
Deduction of pipe 600 mm dia RCC pipe
2 0.785X(0.6+0.15+0.15)^2X0.25 -0.32 cum
Total 3.58 cum
In Ring Beam
1.5-3.0 m BGL 1 3.14 x(1.520+0.345) X 0.345 X 0.25 0.505 Cum
Cover Slab 1 0.785x(1.520+0.30-0.6)^2 0.30 0.351 Cum
124
Sl. No. DESCRIPTION OF ITEM NO L B H QTY. UNIT
1 3 4 5 6 7 8 9
Total 60.05 Kg.
125
UNIT ESTIMATE OF 1 M SHAFT FOR 1520 MM DIA. RCC CIRCULAR MANHOLE
TO REGULATE THE DEPTH OF MANHOLE
1 (b) 1006 Extra for every additional lift of 1.5m or part thereof
in.
All kinds of soil.
4.50 to 6.00 m (3 X 5.81) 17.42 Cum 35.31 615.21
126
DETAILS OF MEASUREMENT OF 1 M SHAFT FOR 1520 MM DIA. RCC CIRCULAR MANHOLE
TO REGULATE THE DEPTH OF MANHOLE
127
ANNEXURE
128
- '5£~ cfil4fttt4, '30'5£0
-q,Jfcfi I(:; '.1
FJT11=r (1•R1ll), 6-'UUTT '5RITT'
~~/(2121-oos2)12022 j:J s-
i:rrrf, cl€i1$ I
11 10 512 022
129
ft closure of Letter No. fb3 /Purchase/General/(2121-0052)2022/ 2- S dated 1/ /05/2022
ANNEXURE-A
Rates for LS.I Marked Ductile Iron Pressure Pipes conforming to l.S -8329/2000 or its latest
amendment(s).
s. Nominal Dia. & F.O.R. Destination Rates per meter (exclusive of G.S.T.) in Rs.,
No. Class of Pipe
anywhere in U.P. up to stores of consignees, inclusive of third party
inspection charges, packing and forwarding charges, transit
insurance charges, road transportation charges etc.
I. 2. 3.
1. 80/cfi-7 953.00
2. 100/cfi-7 1158.00
3. 125/cfi-7 1435.00
4. 150/cfi-7 1639.00
5. 200/cfi-7 2127.00
6. 250/cfi- 7 2795.00
7. 300/cfi-7 3589.00
8. 350/cfi 7 4417.00
9. 400/cfi 7 5372.00
11 . 500/cfi 7 7557.00
1. 80/cfi 9 1092.00
2. 100/cfi 9 1332.00
3. 125/cfi 9 1648.00
4. 150/cfi 9 J892.00
5. 200/cfi 9 2547.00
6. 250/cfi 9 3419.00
7. 300/cfi 9 4341.00
8. 350/cfi 9 5333.00
9. 400/cfi 9 6469.00
130
; ·,.
L
14.
15.
700/cfi 9
750/cfi 9
800/cfi-9
-2 -
15026.00
16692.00
18430.00
16. 900/cfi-9
22471.00
17. 1000/cfi-9
27193.00
18. 1100/cfi-9
31992.00
19. 1200/cfi-9
37203.00
NOTE: - Goods and Services Tax (G .S.T.) is to be paid extra on F.O.R. destination rates .
131
[ . of Letter No.
I e,3 /Purchase/General/(2121-0052)2022/ ' s- dated I I/05/2022
ANNEXURE-B
Rates for LS.I Marked H.D.P.E Pipes conforming to I.S. 4984:2016 or its latest
amendment(s}
s. Dia. in mm, Pressure Rating F.O.R. Destination Rates per meter (exclusive of G.S.T.) in Rs.,
No. of H.D.P.E Pipes anywhere in U.P. up to stores of consignees, inclusive of third
party inspection charges, packing and forwarding charges,
transit insurance charges, road transportation charges etc.
GRADE-PE-100
1. 2. 3.
90/cft.1:1:,. -6 195.00
1.
110/cft.1:!:,.-6 282.00
2.
12 s/cft. 1:1:,. -6 358.00
3.
140/cft.1:1:,. -6 451.00 .
4.
160/cft."Q:,. -6 587.00
5.
180/cft.1:1:,. -6 742.00
6.
200/cft.1:1:,. -6 916.00
7.
90/cft."Q:,.-8 234.00
8.
110/cft.1:!:,.-8 338.00
9.
12s/cft.1:1:,. -8 431.00
IO.
140/cft.1:1:,. -8 544.00
11.
710.00
160/cft.1:!:,. 8
12.
,so/cft.1:1:,.-8 895.00
13.
1102.00
200/cft.1:1:,. 8
14.
287.00
90/cft.1:1:,. 10
15.
409.00
110/cft.1:1:,. 10
16.
524.00
12s/cft.1:1:,. -1 o
17.
660.00
140/cft.1:1:,. 10
18.
860.00
160/cft."Q:,. 10
19.
1093.00
180/cft .1:1:,. 1o
20.
1342.00
200/cft.1:1:,. -10
21.
· Tax (G .s.T). is to be paid extra on F.O.R. destination rates .
.!:iQI!: - Goods an d Serv1ces
132
{i ,ure of Letter No.
0 1,(,
3 /Purchase/General/(2121-0052)2022/ :z ? dated r1 /05/2022
ANNEXURE-C
Rates for LS.I Marked H.D.P.E Pipes conforming to I.S. 14333/1996 or its latest
amendment(s)
s. Dia. in mm, Pressure Rating F.O.R. Destination Rates per meter (exclusive of G.S.T.) in Rs.,
No, of H.D.P.E Pipes anywhere in U.P. up to stores of consignees, inclusive of third
party inspection charges, packing and forwarding charges,
transit insurance char2es, road transportation chari?:es etc.
GRADE-PE-100
1. 2. 3.
1. 110/ITT.1!:[.-6 332.00
2. 140/ITT.1!:[.-6 532.00
3. 160/ITT.1!:[. -6 690.00
4. 200/ITT.1!:[. -6 1078.00
5. 11 o/lTT.1!:f. -s 419.00
6. 140/ITT.1!:[. 8 673.00
7. 160/ITT.1!:[. 8 873.00
200/ITT.1!:f. 8 1366.00
8.
11 o/lTT .1!:f. 10 496.00
9.
140/ITT.1!:[. 10 805.00
10.
160/ITT. 'Q:f. 10 1045.00
11.
12. 2oo/lTT. 'Q:f. 10 1631.00
NOTE,. Goods '"d Se<,ioes Ta, (G.S.T.) is to bo paid «tra oo F.O.R. destioatioo rates. t-~~y/
133
134
135
136
137
138
139
RATES OF LABOUR & MATERIALS FOR YEAR 2022-23 (FOR PROJECT PREPARTIONONLY)
DISTRICT:-SAHARNPUR /SHAMLI/MUZZAFARNAGAR
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
(A) LABOUR:
101 MISTRY 642 DAY
140
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
141
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
(B) MATERIALS:-
235 BRICKS IST CLASS 6206 1000NOS
243 DIFF. IN RATES OF I CLASS & SPECIALLY MOULDED BRICKS 744 1000NOS
142
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
143
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
144
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
145
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
364 DIFFERENCE IN RATES OF IST & 2ND CLASS BRICKS 428.00 1000NO.
366 DIFFERENCE IN RATES OF IST & 3RD CLASS BRICKS 1605.00 1000NO.
146
RATE in Rs.
CODE DESCRIPTION UNIT
(Construction)
1 2 3 4
389 HOLDER FOR A.C. DOWN PIPE 100MM SIZE. 105 NO.
147
SCHEDULE OF RATES FOR YEAR 2022-23 (FORPROJECT PREPARTION ONLY)
DISTRICT:-SAHARANPUR /SHAMLI/MUZZAFARNAGAR
148
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1039 FOR III CLASS BRICK-WORK (DEDUCT FROM ITEMS 1034 TO 1036). 829.79 CUM
1040 SUNDRIED BRICK-WORK IN MUD-MORTAR IN FOUNDATION & PLINTH.
4060.63 CUM
1041 1ST CLASS BRICK-WORK IN ARCHES (EXTRA ON ITEMS 1027 TO 1036).
959.49 CUM
1042 SAME AS ITEM 1041 BUT IN JACK-ARCHES (EXTRA ON ITEMS 1027 TO
1033). 1053.93 CUM
1043 SAME AS ITEM 1041 BUT IN WELL-STEINING WITH ORDINARY BRICKS
(EXTRA ON ITEMS 1027 TO 1033). 1256.26 CUM
1044 SAME AS ITEM 1043 BUT WITH SPECIALLY MOULDED BRICKS (EXTRA
ON ITEM 1043). 845.99 CUM
1045 11.5 CM STRING OR DRIP-COURSE OF 1ST CLASS-BRICK IN KANKAR-
LIME. 525.14 RM
1046 SAME AS ITEM 1045 BUT IN 1:6 CEMENT & LOCAL SAND. 418.68 RM
1047 SAME AS ITEM 1045 BUT IN 23 CM CORNICE IN KANKAR-LIME WITH
LIME-PLASTER. 392.97 RM
1048 SAME AS ITEM 1047 BUT IN 1:6 CEMENT & LOCAL-SAND WITH
PLASTERING 1:6. 333.77 RM
1049 EXTRA FOR CUTTING OF BRICK FOR MOULDING. 134.71 RM
1050 MAKING OPENING THROUGH WALLS IN LIME OR CEMENT MORTAR. 2829.56 CUM
1051 R.B. WORK IN SUN-SHADE WITH 1ST CLASS BRICK, CEMENT & COARSE-
SAND MORTAR 1:3. 9276.79 CUM
1052 SAME AS ITEM 1051 BUT IN LINTELS. 8180.66 CUM
1053 ENCASING ROLLED STEEL SECTIONS IN 1:3 BRICK WORK IN CEMENT &
COARSE-SAND. 1454.24 RM
1054 20 MM THICK D.P.C. WITH CEMENT & COARSE-SAND 1:2. 329.41 SQM
1055 SAME AS ITEM 1054 BUT 25 MM THICK C.C. WITH CEMENT, COARSE-
SAND & 12 MM STONE GRIT 1:1.5:3. 421.73 SQM
1056 SUPPLY & FIX FINE-DRESSED STONE IN DOOR-SILLS WITH CEMENT &
LOCAL-SAND 1:6. 39419.20 CUM
1057 SUPPLY & FIX 40 MM THICK STONE-SLAB IN STEPS & SHELVES WITH
CEMENT & LOCAL-SAND 1:6. 1230.52 SQM
1058 SUPPLY & FIX 40 MM THICK STONE CHAJJAS WITH CEMENT & LOCAL-
SAND 1:6. 1230.52 SQM
1059 SUPPLY & FIX UPTO 40 MM THICK STONE SUN-SHADE OVER DOORS &
WINDOWS WITH CEMENT & LOCAL-SAND 1:6. 1048.06 SQM
1060 SUPPLY & FIX 50 MM TO 60 MM THICK STONE WITH CEMENT & COARSE-
SAND 1:3. 6758.48 SQM
1061 C.P. TEAK-WOOD WROUGHT, FRAMED & FIXED IN CHAUKHATS. 139550.00 CUM
1062 SAME AS ITEM 1061 BUT WITH SHEESHAM-WOOD. 114201.40 CUM
1063 SAME AS ITEM 1061 BUT WITH INDIAN-SAL-WOOD. 94594.20 CUM
1064 SAME AS ITEM 1061 BUT WITH DEODAR-WOOD. 134663.60 CUM
1065 SAME AS ITEM 1061 BUT WITH KAIL-WOOD. 73680.20 CUM
1066 SAME AS ITEM 1061 BUT WITH COUNTRY-WOOD. 65031.20 CUM
1067 SAME AS ITEM 1061 TO 1066 BUT FOR CURVED WORK (EXTRA ON
ITEMS 1061 TO 1066). 25%
1068 WOOD-WORK WROUGHT, FRAMED & FIX IN ROOF-TRUSSES PURLINS,
CEILINGS, JOINTS (DEDUCT FROM ITEMS 1061 TO 1066). 270.15 CUM
1069 SUPPLY & FIX 40 MM THICK C.P. TEAK WOOD PART PANNELLED & PART
GLAZED IN DOOR & WINDOW SHUTTERS. 5446.90 SQM
1070 ADDITIONAL COST FOR FIXING GLASS-PANES WITH C.P. TEAK-WOOD.
601.57 SQM
1071 SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD FULLY PANELLED (40
MM THICK). 6862.88 SQM
1072 SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD FULLY GLAZED (40 MM
THICK). 4464.07 SQM
1073 SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD 35 MM THICK. 4932.80 SQM
1074 SAME AS ITEM 1071 BUT FOR C.P. TEAK WOOD 35 MM THICK. 6349.37 SQM
1075 SAME AS ITEM 1072 BUT FOR C.P. TEAK WOOD 35 MM THICK. 4167.82 SQM
1076 SAME AS ITEM 1069 BUT FOR C.P. TEAK WOOD 25 MM THICK. 4111.22 SQM
1077 SAME AS ITEM 1071 BUT FOR C.P. TEAK WOOD 25 MM THICK. 4962.42 SQM
1078 SAME AS ITEM 1072 BUT FOR C.P. TEAK WOOD 25 MM THICK. 3501.17 SQM
149
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1079 SAME AS ITEM 1069 BUT FOR SHEESHAM WOOD 40 MM THICK. 4710.60 SQM
1080 SAME AS ITEM 1071 BUT FOR SHEESHAM WOOD 40 MM THICK. 5810.80 SQM
1081 SAME AS ITEM 1072 BUT FOR SHEESHAM WOOD 40 MM THICK. 3934.07 SQM
1082 SAME AS ITEM 1079 BUT FOR SHEESHAM WOOD 35 MM THICK. 4302.59 SQM
1083 SAME AS ITEM 1080 BUT FOR SHEESHAM WOOD 35 MM THICK. 5402.35 SQM
1084 SAME AS ITEM 1081 BUT FOR SHEESHAM WOOD 35 MM THICK. 3698.49 SQM
1085 SAME AS ITEM 1069 BUT FOR SAL WOOL 40 MM THICK. 4139.30 SQM
1086 SAME AS ITEM 1071 BUT FOR SAL WOOD 40 MM THICK. 4995.07 SQM
1087 SAME AS ITEM 1072 BUT FOR SAL WOOD 40 MM THICK. 3522.49 SQM
1088 SAME AS ITEM 1085 BUT FOR SAL WOOD 35 MM THICK. 3812.83 SQM
1089 SAME AS ITEM 1076 BUT FOR SAL WOOD 35 MM THICK. 4668.56 SQM
1090 SAME AS ITEM 1087 BUT FOR SAL WOOD 35 MM THICK. 3334.00 SQM
1091 SAME AS ITEM 1069 BUT FOR DEODAR WOOD 40 MM THICK. 5308.45 SQM
1092 SAME AS ITEM 1071 BUT FOR DEODAR WOOD 40 MM THICK. 6664.47 SQM
1093 SAME AS ITEM 1072 BUT FOR DEODAR WOOD 40 MM THICK. 4365.73 SQM
1094 SAME AS ITEM 1091 BUT FOR DEODAR WOOD 35 MM THICK. 4814.78 SQM
1095 SAME AS ITEM 1092 BUT FOR DEODAR WOOD 35 MM THICK. 6170.88 SQM
1096 SAME AS ITEM 1093 BUT FOR DEODAR WOOD 35 MM THICK. 4076.07 SQM
1097 SAME AS ITEM 1091 BUT FOR DEODAR WOOD 25 MM THICK. 4025.04 SQM
1098 SAME AS ITEM 1092 BUT FOR DEODAR WOOD 25 MM THICK. 4838.73 SQM
1099 SAME AS ITEM 1093 BUT FOR DEODAR WOOD 25 MM THICK. 3436.30 SQM
1100 SAME AS ITEM 1069 BUT FOR CHIR WOOD 40 MM THICK. 3597.62 SQM
1101 SAME AS ITEM 1071 BUT FOR CHIR WOOD 40 MM THICK. 4221.45 SQM
1102 SAME AS ITEM 1072 BUT FOR CHIR WOOD 40 MM THICK. 3131.16 SQM
1103 SAME AS ITEM 1100 BUT FOR CHIR WOOD 35 MM THICK. 3348.13 SQM
1104 SAME AS ITEM 1101 BUT FOR CHIR WOOD 35 MM THICK. 3972.14 SQM
1105 SAME AS ITEM 1102 BUT FOR CHIR WOOD 35 MM THICK. 2975.30 SQM
1106 SAME AS ITEM 1100 BUT FOR CHIR WOOD 25 MM THICK. 2949.61 SQM
1107 SAME AS ITEM 1101 BUT FOR CHIR WOOD 25 MM THICK. 3299.88 SQM
1108 SAME AS ITEM 1102 BUT FOR CHIR WOOD 25 MM THICK. 2653.44 SQM
1109 SAME AS ITEM 1069 BUT FOR KAIL WOOD 40 MM THICK. 4129.44 SQM
1110 SAME AS ITEM 1071 BUT FOR KAIL WOOD 40 MM THICK. 4119.01 SQM
1111 SAME AS ITEM 1072 BUT FOR KAIL WOOD 40 MM THICK. 3078.37 SQM
1112 SAME AS ITEM 1109 BUT FOR KAIL WOOD 35 MM THICK. 3286.19 SQM
1113 SAME AS ITEM 1110 BUT FOR KAIL WOOD 35 MM THICK. 3879.75 SQM
1114 SAME AS ITEM 1111 BUT FOR KAIL WOOD 35 MM THICK. 2940.43 SQM
1115 SAME AS ITEM 1109 BUT FOR KAIL WOOD 25 MM THICK. 2903.74 SQM
1116 SAME AS ITEM 1110 BUT FOR KAIL WOOD 25 MM THICK. 2798.89 SQM
1117 SAME AS ITEM 1111 BUT FOR KAIL WOOD 25 MM THICK. 2630.34 SQM
1118 SUPPLY OF 1 MM THICK SHEET IRON PANNELLED DOOR & WINDOW
SHUTTERS IN 40 MM THICK SALWOOD FRAME. 3688.93 SQM
1119 SUPPLY & FIXING OF 40 MM THICK C.P. TEAK WOOD DOOR & WINDOW
SHUTTERS. 4749.06 SQM
1120 SAME AS ITEM 1119 BUT IN SHEESHAM WOOD 40 MM THICK. 4083.94 SQM
1121 SAME AS ITEM 1119 BUT IN SAL WOOD 40 MM THICK. 3569.48 SQM
1122 SAME AS ITEM 1119 BUT IN DEODAR WOOD 40 MM THICK. 4620.84 SQM
1123 SAME AS ITEM 1119 BUT IN CHIR WOOD 40 MM THICK. 3082.46 SQM
1124 SAME AS ITEM 1119 BUT IN KAIL WOOD 40 MM THICK. 3020.72 SQM
1125 SUPPLY OF GALVANIZED IRON WIRE OVER WINDOWS AND C.P. TEAK
WOOD BATTENS 50 MM X 12 MM. 934.25 SQM
1126 SAME AS ITEM 1125 BUT WITH SHEESHAM WOOD BATTENS 50 MM X 12
MM. 869.70 SQM
1127 SAME AS ITEM 1125 BUT WITH DEODAR WOOD BATTENS 50 MM X 12
MM. 927.45 SQM
1128 SAME AS ITEM 1125 BUT WITH SAL WOOD BATTENS 50 MM X 12 MM.
816.84 SQM
1129 SAME AS ITEM 1069 BUT BRACED & BATTENED 40 MM THICK
SHEESHAM WOOD DOORS & WINDOWS. 7638.89 SQM
1130 SAME AS ITEM 1129 BUT IN SAL WOOD 40 MM THICK. 6411.69 SQM
1131 SAME AS ITEM 1129 BUT IN COUNTRY WOOD 40 MM THICK. 4515.41 SQM
1132 SAME AS ITEM 1129 BUT IN DEODAR WOOD 40 MM THICK. 8938.73 SQM
1133 SAME AS ITEM 1129 BUT IN KAIL WOOD 40 MM THICK. 5064.83 SQM
150
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1134 SAME AS ITEM 1129 BUT IN CHIR WOOD 40 MM THICK. 5214.30 SQM
1135 SUPPLY OF 40MM THICK C.P. TEAK WOOD DOOR & WINDOW
SHUTTERS WITH 9MM THICK PLYWOOD OR PRESSED WOOD PANELS
AND FIXING C.P. TEAK WOOD CLEATS, STOPS, HINGES, LOCK, BOLTS,
HANDLERS, SPRINGS & OTHER FITTINGS (EXCLUDING SUPPLY OF
FITTINGS). 4392.97 SQM
1136 SAME AS ITEM 1135 BUT IN DEODAR WOOD 40 MM THICK. 4273.02 SQM
1137 SAME AS ITEM 1135 BUT IN SHEESHAM WOOD 40 MM THICK. 3733.28 SQM
1138 SAME AS ITEM 1135 BUT IN SAL WOOD 40 MM THICK. 3220.12 SQM
1139 SAME AS ITEM 1135 BUT IN KAIL WOOD 40 MM THICK. 2662.54 SQM
1140 SAME AS ITEM 1135 BUT IN CHIR WOOD 40 MM THICK. 2730.74 SQM
1141 SAME AS ITEM 1135 BUT IN COUNTRY WOOD 40 MM THICK. 2453.54 SQM
1142 APPROXIMATE COST OF IRON-FITTINGS FOR DOORS & WINDOWS. LS
1143 APPROXIMATE COST OF OXIDIZED IRON-FITTINGS FOR DOORS &
WINDOWS. LS
1144 APPROXIMATE COST OF BRASS-FITTINGS FOR DOORS & WINDOWS.
LS
1145 APPROXIMATE COST OF OXIDISED BRASS-FITTINGS FOR DOORS &
WINDOWS. LS
1146 ROLLED STEEL JOISTS LIGHT SECTION 0.0 - 7.5M HIGH. 1652.70 QTL
1147 ROLLED STEEL JOISTS HEAVY SECTION 0.0 - 7.5M HIGH. 3218.82 QTL
1148 EXTRA ON ITEMS 1146 & 1147 FOR MORE THAN 7.5M HEIGHT. 1004.42 QTL
1149 MILD STEEL OR IRON WORK OF SMALL SIZE & SECTIONS. 11088.30 QTL
1150 MILD STEEL OR IRON WORK IN HEAVY SIZES. 11833.86 QTL
1151 MILD STEEL OR IRON IN PLAIN WORK. 10141.64 QTL
1152 CUTTING ROLLED STEEL JOISTS UPTO 225MM X 100MM. 309.30 CUT
1153 CUTTING ROLLED STEEL JOISTS ABOVE 225MM X 100MM. 618.60 CUT
1154 CUTTING OF PLATES & ANGLES UPTO 20MM THICK. 135.30 SQM
1155 CUTTING ROUNDS UPTO 15MM DIA. 7.73 CUT
1156 BORING HOLES IN MILD STEEL OR IRON UPTO 10MM DIA. & UPTO 6 MM
THICK PLATE. 41.79 HOLE
1157 SAME AS ITEM 1156 BUT HOLES 10 - 20MM DIA. & 6.0 - 13.0 MM THICK
PLATE. 66.39 HOLE
1158 PROVIDE & FIX 100MM DIA. C.I. DOWN PIPE. 726.86 RM
1159 FIX BARBED IRON WIRE FENCING TO POSTS. 73.09 RM
1160 SUPPLY & FIX SINGLE ALLAHABAD TILES FOR ROOF WORK. 880.86 SQM
1161 SAME AS ITEM 1160 BUT FOR DOUBLE ALLAHABAD TILES ROOF. 1409.38 SQM
1162 SUPPLY & FIX LARGE COUNTRY TILES ROOFING ON BAMBOO FRAMES.
1004.93 SQM
1163 SAME AS ITEM 1162 BUT SMALL SIZE COUNTRY TILES. 1392.26 SQM
1164 LAYING OF R.B. SLAB WITH 1ST CLASS BRICKS LAID IN CEMENT
MORTAR WITH APPROVED COARSE SAND (1:3). 10990.18 CUM
1165 SUPPLY & FIX GALVANISED CORRUGATED IRON ROOFING 0.63MM
THICK. 831.84 SQM
1166 SUPPLY & FIX 0.63MM THICK RIDGES, VALLEY & GUTTERS FOR G.C.
IRON ROOFING. 1053.22 SQM
1167 SUPPLY & LAY 40MM THICK INSULATION LAYER OF SAND & CLAY OVER
ROOF. 59.96 SQM
1168 SUPPLY & LAY 25MM THICK DEODAR WOOD PLANK CEILING. 4196.55 SQM
1169 SAME AS ITEM 1168 BUT FOR C.P. TEAK WOOD. 4362.91 SQM
1170 SAME AS ITEM 1168 BUT FOR KAIL WOOD. 2124.14 SQM
1171 SUPPLY & FIX 6MM THICK A.C. PLANE SHEETS CEILING WITH 25MM X
40MM DEODAR WOOD BEADINGS. 994.80 SQM
1172 SAME AS ITEM 1171 BUT WITH C.P. TEAK WOOD BEADING. 1003.65 SQM
1173 SAME AS ITEM 1171 BUT OF MASONITE OR CELOTAX WITH DEODAR
BEADING. 1215.12 SQM
1174 SAME AS ITEM 1173 BUT WITH C.P. TEAK WOOD BEADING. 1223.96 SQM
1175 STRUCK POINTING WITH KANKAR LIME ON BRICK-WORK. 251.34 SQM
1176 SAME AS ITEM 1175 BUT FOR FLUSH POINTING. 204.45 SQM
1177 RUBBING WITH KANKAR LIME OR WITH WHITE LIME & SURKHI ON
BRICK-WORK. 132.91 SQM
151
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1178 SAME AS ITEM 1175 BUT WITH CEMENT & LOCAL SAND (1:2) MORTAR.
251.19 SQM
1179 SAME AS ITEM 1178 BUT FLUSH POINTING (DEDUCT FROM ITEM 1178).
37.28 SQM
1180 SAME AS ITEM 1178 & 1179 BUT IN FLOORS (DEDUCT FROM ITEMS 1178
& 1179). 45.05 SQM
1181 RAISED POINTING WITH CEMENT & LOCAL SAND MORTAR (1:2) ON
BRICK WORK. 274.70 SQM
1182 STRUCK CEMENT POINTING IN CEMENT MORTAR (1:2) WITH
COLOURING MATERIALS. 268.40 SQM
1183 12MM THICK PLASTER WITH KANKAR LIME OVER BRICK-WORK. 222.41 SQM
1184 SAME AS ITEM 1183 BUT WITH CEMENT & LOCAL SAND (1:2) MORTAR.
229.41 SQM
1185 SAME AS ITEM 1183 BUT WITH CEMENT & COARSE SAND (1:2) MORTAR.
267.04 SQM
1186 SAME AS ITEM 1183 BUT WITH CEMENT & LOCAL SAND (1:3) MORTAR.
206.96 SQM
1187 SAME AS ITEM 1183 BUT WITH CEMENT & COARSE-SAND MORTAR
(1:3). 238.56 SQM
1188 SAME AS ITEM 1183 BUT WITH CEMENT & LOCAL SAND MORTAR (1:4).
197.72 SQM
1189 SAME AS ITEM 1183 BUT WITH CEMENT AND LOCAL SAND MORTAR
(1:5). 194.80 SQM
1190 SAME AS ITEM 1183 BUT WITH CEMENT & LOCAL SAND MORTAR (1:6).
187.68 SQM
1191 EXTRA ON ALL ITEM OF PLASTER IF DONE ON CEILING. 29.65 SQM
1192 SAME AS ITEM 1183 BUT WITH CEMENT, WHITE LIME & LOCAL SAND
(1:1:6). 220.05 SQM
1193 MUD-PLASTER OVER BRICK WALL. 92.14 SQM
1194 20 MM THICK STUCCO PLASTER RESEMBLING MARBLE FINISH. 1132.43 SQM
1195 20MM THICK PLASTER ON WALLS, STEPS ETC. FINISHED WITH 5MM
THICK CEMENT & MARBLE CHIPS (1:2). 1354.87 SQM
1196 SAME AS ITEM 1195 BUT FINISHED WITH 5MM THICK WHITE CEMENT &
MARBLE CHIPS. 1267.18 SQM
1197 SAME AS ITEM 1196 BUT WITH 5MM THICK TOP COAT COLOURED. 1368.25 SQM
1198 20MM THICK PEBBLE-DASH PLASTER. 476.90 SQM
1199 ROUGH CAST FINISH TO PLASTER OF DIFFERENT MORTARS (EXTRA
TO PLASTER ITEMS). 97.42 SQM
1200 PLASTER OVER ROUGH FACE OF ONE BRICK WALL (EXTRA TO
PLASTER ITEMS). 36.04 SQM
1201 20MM THICK CEMENT PLASTER IN DADO OR SKIRTING. 602.28 SQM
1202 25MM THICK 1:2:4 P.C.C. FLOOR WITH CEMENT, COARSE SAND AND
20MM GAUGE STONE BALLAST WITH BASE CONCRETE (75MM THICK)
1:4:8 CEMENT, LOCAL SAND & BRICK BALLAST 40MM GAUGE. 639.79 SQM
1203 SAME AS ITEM 1202 BUT WITH BASE CONCRETE CONSISTING OF
BRICK BALLAST, WHITE LIME & SURKHI 100:16:32. 641.17 SQM
1204 SAME AS ITEM 1202 BUT WITH BASE CONCRETE CONSISTING OF
BRICK BALLAST, WHITE LIME & SAND MORTAR (1:2). 643.13 SQM
1205 SAME AS ITEM 1202 BUT WITH 50MM THICK 1:1.5:3 P.C.C. FLOOR. 917.56 SQM
1206 SAME AS ITEM 1202 BUT WITH 40MM THICK FLOOR & WITHOUT BASE
CONCERETE. 440.95 SQM
1207 EXTRA ON ITEMS 1202, 1205 & 1206 WHEN FLOORS ARE POLISHED. 433.38 SQM
1208 EXTRA ON ITEMS 1202, 1205 & 1206 WHEN COLOURED, POLISHED
FLOORS ARE LAID. 501.77 SQM
1209 STONE FLOORS 40MM THICK OF MIRZAPUR OR OTHER APPROVED
STONE FLAGS, SET IN WHITE LIME & SAND. 2557.52 SQM
1210 SAME AS ITEM 1209 BUT STONE FLAGS LAID IN (1:4) CEMENT & LOCAL
SAND MORTAR. 2471.31 SQM
1211 SAME AS ITEM 1209 BUT STONE FLAGS LAID IN WHITE LIME & SURKHI
1:2 & BASE CONCRETE WITH BRICK BALLAST, WHITE LIME & SURKHI
(1:2). 2495.49 SQM
152
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1212 SAME AS ITEMS 1209, 1210, 1211 BUT UPPER SURFACE & EDGES
CHIESEL DRESSED & JOINT UPTO 6MM THICK IN WHITE LIME & SAND. 2320.82 SQM
1213 SAME AS ITEM 1212 BUT IN CEMENT & SAND. 2216.88 SQM
1214 SAME AS ITEM 1212 BUT BASE CONCRETE IN WHITE LIME & SURKHI.
2263.81 SQM
1215 1ST CLASS BRICK FLOOR LAID IN CEMENT & LOCAL SAND MORTAR
(1:6) & POINTED WITH (1:2) CEMENT MORTAR OVER 75MM THICK BASE
CONCRETE WITH KANKAR LIME. 1110.25 SQM
1216 SAME AS ITEM 1215 BUT WITH 75MM BASE CONCRETE WITH (1:2)
WHITE LIME & SURKHI. 1086.90 SQM
1217 SAME AS ITEM 1215 BUT WITH 75MM BASE CONCRETE IN (1:4:8)
CEMENT, LOCAL SAND & BRICK BALLAST. 1114.25 SQM
1218 1ST CLASS BRICKS FLOOR LAID DRY, JOINTS SAND FILLED. 536.34 SQM
1219 GRANOLYTHIC MARBLE FLOORING 25MM THICK WITH 20MM THICK
LAYER OF CEMENT & COARSE SAND & 12 MM GAUGE STONE CHIPS
WITH SURFACE COAT OF ORDINARY CEMENT INCLUDING 75MM THICK
BASE CONCRETE WITH WHITE LIME & SAND. 1546.54 SQM
1220 SAME AS ITEM 1219 BUT WITH WHITE CEMENT IN TOP LAYER. 1651.97 SQM
1221 SAME AS ITEM 1219 BUT WITH COLOURED FLOOR. 1661.76 SQM
1222 SAME AS ITEM 1219 BUT BASE CONCRETE IN (1:4:8) CEMENT, LOCAL
SAND AND BRICK BALLAST. 1551.29 SQM
1223 SAME AS ITEM 1220 BUT BASE CONCRETE IN (1:4:8) CEMENT, LOCAL
SAND AND BRICK BALLAST. 1649.25 SQM
1224 SAME AS ITEM 1221 BUT BASE CONCRETE IN (1:4:8) CEMENT, LOCAL
SAND AND BRICK BALLAST. 1660.74 SQM
1225 SAME AS ITEM 1219 BUT BASE CONCRETE IN WHITE LIME & SURKHI
(1:2) (EXTRA ON ITEM 1219). 1556.40 SQM
1226 SAME AS ITEM 1220 BUT BASE CONCRETE IN WHITE LIME & SURKHI
(1:2) (EXTRA ON ITEM 1220). 1636.25 SQM
1227 SAME AS ITEM 1221 BUT BASE CONCRETE IN WHITE LIME & SURKHI
(1:2) (EXTRA ON ITEM 1221). 1647.25 SQM
1228 GRANOLYTHIC MARBLE DADO 20MM THICK WITH 14MM THICK LAYER
OF CEMENT & COARSE SAND (1:2) WITH 6MM THICK SURFACE COAT
OF ORDINARY CEMENT. 1304.87 SQM
1229 SAME AS ITEM 1228 BUT WITH WHITE CEMENT IN TOP COAT. 1405.58 SQM
1230 SAME AS ITEM 1228 BUT WITH COLOURED DADO. 1417.14 SQM
1231 SUPPLY AND FIXING OF 15X15CM CHINA WHITE GLAZED TILES 6MM
THICK IN FLOORING OR IN SKIRTING OR DADO LAID WITH (1:3)
CEMENT & COARSE SAND. 3288.08 SQM
1232 PAINTING OR VARNISHING ON NEW IRON WORK IN SMALL AREAS OR
NEW WOOD WORK WITH ONE COAT PRIMING & ONE COAT PAINT OR
VARNISH. 119.42 SQM
1233 SAME AS ITEM 1232 BUT FOR EVERY COAT AFTER FIRST COAT. 71.12 SQM
1234 SAME AS ITEM 1233 BUT FOR EVERY COAT ON PREVIOUSLY PAINTED
SURFACE. 76.44 SQM
1235 PAINTING ROOF OR OTHER IRON WORK IN LARGE AREA WITH ONE
COAT PRIMING & ONE COAT PAINT OR VARNISH. 124.69 SQM
1236 SAME AS ITEM 1235 BUT FOR EVERY COAT AFTER FIRST COAT. 71.12 SQM
1237 SAME AS ITEM 1236 BUT FOR EVERY COAT OVER PREVIOUSLY
PAINTED SURFACE. 71.12 SQM
1238 PAINTING OR VARNISHING WITH VALSPER OR HIGH GRADE ENAMEL
153
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1245 ONE COAT SOLIGNUM OR OTHER PRESERVATIVE ON NEW WOOD
WORK. 41.25 SQM
1246 SAME AS ITEM 1245 BUT FOR EVERY COAT AFTER FIRST COAT ON
PREVIOUSLY TREATED SURFACE. 26.72 SQM
1247 OILING WOOD WORK WITH DOUBLE BOILED LINSED OIL. 22.68 SQM
1248 REMOVING PAINT OR VARNISHING WITH PAINT REMOVER OR CAUSTIC
SODA. 39.36 SQM
1249 WAX POLISHING OVER NEW WOOD WORK WUTH READY MADE
POLISH AFTER RUBBING DOWN WITH SAND PAPER. 62.59 SQM
1250 SAME AS ITEM 1249 BUT REPOLISHING WOOD WORK ALREADY WAX
POLISHED WITH READY MADE WAX POLISH. 36.92 SQM
1251 WHITE WASHING ONE COAT. 12.04 SQM
1252 SAME AS ITEM 1251 BUT TWO COATS. 18.33 SQM
1253 SAME AS ITEM 1251 BUT THREE COATS. 28.60 SQM
1254 COLOUR WASHING ONE COAT USING COLORING MATERIALS OF BUFF
BLUE, BROWN SHADE. 16.34 SQM
1255 SAME AS ITEM 1254 BUT TWO COATS. 29.03 SQM
1256 SAME AS ITEM 1254 BUT USING COLOURING MATERIALS OF PINK,
GREEN OR YELLOW SHADE. 18.60 SQM
1257 SAME AS ITEM 1256 BUT TWO COATS. 32.73 SQM
1258 COLOUR WASHING ONE COAT USING COPPER OR IRON SULPHATE. 19.26 SQM
1259 SAME AS ITEM 1258 BUT TWO COATS. 38.69 SQM
1260 CEMENT WASHING. 15.25 SQM
1261 ONE PRIMING COAT & ONE COAT OF DRY DISTEMPER ON NEW WORK.
63.73 SQM
1262 SAME AS ITEM 1261 BUT FOR EACH COAT OF DISTEMPER AFTER FIRST
COAT. 30.34 SQM
1263 DISMANTLING SUNDRIED BRICK WORK. 141.24 CUM
1264 DISMANTLING BRICK WORK OR STONE WORK IN LIME OR CEMENT
MORTAR. 659.12 CUM
1265 SAME AS ITEM 1264 BUT IN MUD MORTAR. 376.64 CUM
1266 DISMANTLING R.C.C. OR R.B. WORK. 1521.90 CUM
1267 DISMANTLING JACK ARCHED OR WOODEN BEAM & BARJA ROOFS
INCLUDING BEAMS & ROOF CONCRETE. 659.12 CUM
1268 SAME AS ITEM 1269 BUT ONLY ROOF CONCRETE. 470.80 CUM
1269 DISMANTLING CEMENT CONCRETE OR BRICKS OR GRANOLYTHIC
FLOORS INCLUDING BASE CONCRETE. 94.16 SQM
1270 SAME AS ITEM 1269 BUT STONE FLAG OR TILED FLOOR. 94.16 SQM
1271 DISMANTLING SINGLE TILED ROOF INCLUDING PURLINES & BATTENS.
101.22 SQM
1272 SAME AS ITEM 1271 BUT DOUBLE TILED ROOF. 171.84 SQM
1273 DISMANTLING CORRUGATED IRON ROOFS, WALLS OR PARTITIONS
INCLUDING PURLINS, BATTENS & VERTICAL SUPPORTS. 81.18 SQM
1274 DISMANTLING OF GIRDERS, TRUSSES & OTHER STEEL WORK. 2416.01 QTL
1275 DISMANTLING DOORS & WINDOWS INCLUDING CHAUKHATS WITH
HOLDFASTS. 86.61 SQM
1276 DISMANTLING DOORS & WINDOWS LEAVES. 44.74 SQM
1277 DISMANTLING DOORS & WINDOWS INCLUDING CHAUKHATS BUT
EXCLUDING HOLDFASTS. 75.01 SQM
1278 DISMANTLING EXISTING PLASTER. 94.16 SQM
1279 RACKING OUT JOINTS OF BRICK WORK IN CEMENT & LIME MORTAR TO
A DEPTH OF 10MM. 47.08 SQM
1280 SCRAPING OLD WHITE OR COLOUR WASHING. 23.54 SQM
1281 SUPPLY & FIX BLOCK OF C.P. TEAK WOOD 75X75X120MM IN WALL
WITH (1:3) (CEMENT & COARSE SAND MORTAR. 106.34 NO.
1282 SUPPLY & FIX BRASS CLEATS FOR CLERESTORY WINDOW CORDS TO
TEAK WOOD PLATE 100X100X10MM OVER BLOCKS OF C.P. TEAK
WOOD. 150.96 NO.
1283 SAME AS ITEM 1282 BUT WITH OXIDISED IRON CLEATS. 97.53 NO.
1284 SUPPLY & FIX COTTON CORD FOR CLERESTORY WINDOW. 179.44 KG
1285 SUPPLY & FIX C.P. TEAK WOOD CLEATS 100X75X50 MM TO C.P. TEAK
DOORS & WINDOWS WITH BRASS HINGS 50MM. 206.55 NO.
154
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1286 SUPPLY & FIX 100MM DIA. A.C. DOWN PIPES COMPLETE WITH ROSE,
HEADS, BENDS & GRATINGS WITH M.S. CLAMP 25X3MM FIXED TO
WALLS & SUPPLY OF 150MM LONG, 6MM DIA. NAILS, REPAIRS OF
PLASTER, PAINTING ETC. COMPLETE. 375.70 RM
1287 SUPPLY & FIX C.P. TEAK WOOD PAG RACK 900X75X25MM WITH THREE
BRASS PEGS ON 75X75X120MM TEAK WOOD BLOCK. 1302.52 NO.
1288 SUPPLY & FIX 40MM THICK C.P. TEAK WOOD PANNELLED PARTITION
WITH TEAK WOOD FRAMES 100X80MM TOP, BOTTOM & SIDE
VERTICALS AT 1.5M APART. 7710.99 SQM
1289 SUPPLY & FIX PLAIN ASBESTOS SHEET PARTITION WITH 50X10MM
DEODAR OR SHEESHAM WOOD BEADING, ERECTION & FIXING. 3565.71 SQM
1290 SAME AS ITEM 1289 BUT WITH MASONITE PARTITIONS. 3681.18 SQM
1291 CONSOLIDATION OF 30 TO 40MM GUAGE KANKAR BY HAND RAMMER,
SORTING KANKAR INTO THREE SIZES REPAIRING PATCHES IN
EXISTING ROAD SURFACE WITH KANKAR, PICKING UP OLD SURFACE,
SPREADING KANKAR, MAKING MEDIS TO RETAIN WATER & RAMMING
WITH CARRIAGE OF MATEL & WATER AND MAINTENANCE OF
BARRIERS, CAUTION POSTS, LIGHTS ETC. (EXCLUDING SUPPLY OF
KANKAR). 681.31 CUM
1292 SAME AS ITEM 1291 BUT FOR CONSOLIDATION BY ROAD ROLLER. 863.55 CUM
1293 SAME AS ITEM 1291 BUT FOR 120MM THICK COAT OF BRICK BALLAST.
681.31 CUM
1294 SAME AS ITEM 1292 BUT FOR 80MM THICK COAT OF BRICK BALLAST.
863.55 CUM
1295 SAME AS ITEM 1292 BUT FOR 12MM THICK COAT OF BRICK BALLAST.
966.77 CUM
1296 SAME AS ITEM 1292 BUT 80MM THICK STONE BALLAST OVER EXISTING
KANKAR ROAD SURFACE. 1093.76 CUM
1297 WATER ALLOWANCE ON ITEM 1291 TO 1296. 117.70 CUM
1298 DIGGING KANKAR INCLUDING BREAKING, CLEANING & ROLLING AND
THE COST OF BORING TO FIND KANKAR STRATA. 1534.43 CUM
1299 MAKING MUD TREE GUARDS IM (I.D) & 1M HIGH ABOVE G.L. 958.61 NO.
1300 DUG BELLING 150MM DEEP IN ONE LINE ALIGNED WITH FLAGS &
JHANDIES. 3148.75 KM
1301 PAINTING WHITE TRAFFIC LINES 75MM WIDE IN THREE COATS WITH
APPROVED WHITE PAINT. 913.43 SQM
1302 BRICK SOLING WITH STRAIGHT OVER BURNT BRICKS & DRY WITH
BRICK EDGING LAID VERTICAL ON EITHER SIDE, FILLING THE JOINTS
WITH LOCAL EARTH. 403.90 SQM
1303 RENEWING PARTIES 3M WIDE, DRESSING SURFACE, FILLING UP TO 8
CM DEPTH & MAKING PROFILES OF EVERY 15M APART. 70.08 RM
1304 BRICK EDGING OF 1ST CLASS BRICKS LAID VERTICAL WITH MUD
MORTAR. 194.06 RM
1305 STACKING OF ROAD METAL TO THE REQUIRED TEMPLATE AFTER
SCREENING AT ROAD SIDE. 169.92 CUM
1306 BITUMEN PAINTING (LABOUR ONLY) OVER WATER BOUND SURFACE
(1ST COAT) EXCLUDING SUPPLY OF PAINT & GRIT. 55.19 SQM
1307 SAME AS ITEM 1306 BUT SUBSEQUENT COATS OF PAINTING OVER
PREVIOUSLY PAINTED SURFACE. 27.60 SQM
1308 SAME AS ITEM 1306 BUT WITH COLD EMULSION IN 2ND COAT. 46.81 SQM
1309 SAME AS ITEM 1306 BUT WITH TAR IN ONE COAT. 48.67 SQM
1310 SAME AS ITEM 1306 BUT WITH TAR IN 2ND COAT OR OTHER
SUBSEQUENT COATS OF PAINTING OVER PREVIOUSLY PAINTED
SURFACE. 24.33 SQM
1311 SCRAPPING OF OLD PAINTED SURFACE (ROAD SURFACE). 102.63 SQM
1312 LAYING C.C. ROAD SLAB 100MM THICK IN (1:2:4) CEMENT, COARSE
SAND & STONE BALLAST OVER PREPARED SURFACE. 12571.05 CUM
1313 SAME AS ITEM 1312 BUT EXCLUDING SUPPLY OF CEMENT, COARSE
SAND & STONE BALLAST. 7035.40 CUM
1314 BLENDING OF WATER BOUND STONE OR KANKAR ROAD SURFACE
WITH LOCAL EARTH OR SAND IN 15MM DEEP LAYERS. 16.21 RM
155
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
1315 EARTH WORK IN EDGING OF THE PAINTED OR C.C. ROAD IN A WIDTH
OF 0.5M ON EITHER SIDE & 100MM DEEP. 30.89 RM
1316 JOINT FILLING IN C.C. ROADS & REMOVING THE OLD TAR OR OTHER
MATERIALS (LABOUR ONLY). 2.69 RM
1317 CONSOLIDATION OF KANKAR IN PATCH REPAIRING BY HAND RAMMER,
PICKING OUT OLD SURFACE UPTO 100MM DEPTH IN A RECTANGULAR
FORM MAKING 50MM WIDE DRAIN AROUND THE PATCH. 1551.11 CUM
1318 PATCH REPAIR OF SURFACE PAINTED WITH BITUMEN INCLUDING
HEATING THE PAINT ETC. (LABOUR ONLY). 5517.88 CUM
1319 CLEANING OF THE EXISTING PAINTED SURFACE & LAYING PREMIX
20MM THICK OVER A TACK COAT WITH GRADED GRIT & BITUMEN
(LABIUR ONLY). 65.58 SQM
1320 SAME AS ITEM 1319 BUT IN PATCHES. 2657.77 CUM
1321 CLEANING THE PREMIX SURFACE & LAYING SEAL COAT WITH 6MM
GRADED GRIT & BITUMEN INCLUDING HEATING OF PAINT (LABOUR
ONLY). 19.45 SQM
1322 SAME AS ITEM 1319 BUT ON WATER BOUND SURFACE. 79.56 SQM
1323 PROVIDE ALL MATERIALS, LABOUR,T & P ETC. & CONSTRUCT 100MM
THICK (1:2:4:) CEMENT CONCRETE ROAD FOR REINSTATEMENT OF
PATCH & TRENCH CUTS IN CEMENT CONCRETE ROAD. 2290.53 SQM
1324 SAME AS ITEM 1323 BUT TWO COATS OF BITUMEN PAINTING INSTEAD
OF 100MM THICK CEMENT CONCRETE CONCRETE LAYER. 1237.26 SQM
1325 SAME AS ITEM 1323 BUT TWO EXCLUDING THE CEMENT CONCRETE
SLAB. 858.13 SQM
1326 MAINTENANCE OF TERRACED ROOFS, FILLING UP CRACKS BEFORE
RAINS WITH BITUMINOUS FILLER. 108.76 SQM
1327 REPAIR OF PLASTER OR POINTING IN PATCHES INCLUDING REMOVAL
OF OLD PLASTER. 25%
1328 REPAIRS OF FLOORING IN PATCHES INCLUDING DIGGING UPTO
EXISTING THICKNESS OF FLOORS, RENEWING THE SAME. 25%
1329 CLEANING OF WELL & THROWING OUT THE SILT TO THE PLACE AS
DIRECTD BY THE ENGINEER IN CHARGE. 1797.28 RM
1330 BLENDING PANES OF GLASS. 149.27 SQM
1331 RENEWING PANES OF GLASS 2.5MM THICK WITH PUTTY & BEADS. 605.77 SQM
1332 CLEANING DOORS & WINDOWS WITH ORDINARY OIL & WATER. 16.09 SQM
1333 FIXING PANES & GLASS INCLUDING PUTTY & BEADS (EXCLUDING
COST OF GLASS). 319.19 SQM
1334 CLEANING PANES OF GLASS WITH SPRIT OR CAUSTIC SODA. 107.76 SQM
1335 LABOUR FOR FIXING DOOR BOLTS OR HINGES OR TOWER BOLTS OR
HASP & STRAPLES OR HANDLES ETC. TO DOORS & WINDOWS. 26.36 EACH
1336 OPENING & REFIXING 100MM DIA. RAIN WATER DOWN PIPE AFTER
CLEANING. 94.68 RM
1337 VARNISHING OR POLISHING FURNITURE WITH HIGH GRADE VARNISH
OR POLISH AFTER SAND PAPERING. 142.82 NO.
156
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
(B) WATER SUPPLY WORKS:
2001 EXCAVATION FOR PIPE LINE 0-1.5 M DEEP IN ORDINARY SOIL (LOAM,
CLAY, SAND). 256.40 CUM
2002 SAME AS ITEM 2001 BUT IN SOIL MIXED WITH
MOORUM/SHINGLE/KANKAR. 298.37 CUM
2003 EXTRA ON ITEMS 2001 AND 2002 FOR ADDITIONAL LEAD AND LIFT. 62.15 CUM
2004 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF
15MM DIA. (NOMINAL) M.S. GALVANIZED SCREWED & SOCKETTED
PIPES (LIGHT & MEDIUM QUALITY), SPECIALS & FITTINGS (INSIDE
HOUSES). 118.43 RM
2005 SAME AS ITEM 2004 BUT FOR 20MM DIA. 131.30 RM
2006 SAME AS ITEM 2004 BUT FOR 25MM DIA. 173.84 RM
2007 SAME AS ITEM 2004 BUT FOR 32MM DIA. 200.92 RM
2008 SAME AS ITEM 2004 BUT FOR 40MM DIA. 239.70 RM
2009 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING OF
15MM DIA. (NOMINAL) M.S. GALVANIZED SCREWED & SOCKETTED
PIPES (MEDIUM QUALITY),SPECIALS & FITTINGS (IN TRENCHES
OUTSIDE HOUSES). 30.33 RM
2010 SAME AS ITEM 2009 BUT FOR 20MM DIA. 43.92 RM
2011 SAME AS ITEM 2009 BUT FOR 25MM DIA. 60.46 RM
2012 SAME AS ITEM 2009 BUT FOR 32MM DIA. 73.09 RM
2013 SAME AS ITEM 2009 BUT FOR 40MM DIA. 80.41 RM
2014 SAME AS ITEM 2009 BUT FOR 50MM DIA. 94.12 RM
2015 SAME AS ITEM 2009 BUT FOR 65MM DIA. 111.60 RM
2016 SAME AS ITEM 2009 BUT FOR 80MM DIA. 135.35 RM
2017 SAME AS ITEM 2009 BUT FOR 100MM DIA. 159.28 RM
2018 SAME AS ITEM 2009 BUT FOR 125MM DIA. 173.93 RM
2019 SAME AS ITEM 2009 BUT FOR 150MM DIA. 196.45 RM
2020 CARTING FROM STORE, LAYING, JOINTING & TESTING 50MM DIA.
CLASS I & II A.C. PRESURE PIPE WITH FITTING ETC. 28.11 RM
2021 SAME AS ITEM 2020 BUT 65 MM DIA. 34.82 RM
2022 SAME AS ITEM 2020 BUT 80 MM DIA. 37.03 RM
2023 SAME AS ITEM 2020 BUT 100MM DIA. 44.98 RM
2024 SAME AS ITEM 2020 BUT 125MM DIA. 56.68 RM
2025 SAME AS ITEM 2020 BUT 150MM DIA. 64.52 RM
2026 SAME AS ITEM 2020 BUT 200MM DIA. 77.65 RM
2027 SAME AS ITEM 2020 BUT 250MM DIA. 92.72 RM
2028 SAME AS ITEM 2020 BUT 300MM DIA. 108.03 RM
2029 SAME AS ITEM 2020 BUT 350MM DIA. 159.30 RM
2030 SAME AS ITEM 2020 BUT 400MM DIA. 198.78 RM
2031 SAME AS ITEM 2020 BUT 450MM DIA. 239.13 RM
2032 SAME AS ITEM 2020 BUT 500MM DIA. 295.51 RM
2033 SAME AS ITEM 2020 BUT 600MM DIA. 412.52 RM
2034 SAME AS ITEM 2020 TO 2033 BUT CLASS III A.C. PIPE (EXTRA ON ITEMS
2020 TO 2033). 5%
2035 CARTING FROM STORE, LAYING, JOINTING, FIXING & TESTING 15 MM
DIA. (I.D.) P.V.C. PIPES & SPECIALS. 8.53 RM
2036 SAME AS ITEM 2035 BUT 20MM DIA. 10.40 RM
2037 SAME AS ITEM 2035 BUT 25MM DIA. 11.39 RM
2038 SAME AS ITEM 2035 BUT 32MM DIA. 13.80 RM
2039 SAME AS ITEM 2035 BUT 40MM DIA. 15.67 RM
2040 SAME AS ITEM 2035 BUT 50MM DIA. 23.57 RM
2041 SAME AS ITEM 2035 BUT 65MM DIA. 32.00 RM
2042 SAME AS ITEM 2035 BUT 80MM DIA. 39.51 RM
2043 SAME AS ITEM 2035 BUT 100 MM DIA. 43.93 RM
2044 SAME AS ITEM 2035 BUT 125 MM DIA. 47.97 RM
2045 SAME AS ITEM 2035 BUT 150 MM DIA. 61.67 RM
2046 SAME AS ITEM 2035 BUT 180 MM DIA. 68.86 RM
2047 SAME AS ITEM 2035 BUT 200 MM DIA. 71.51 RM
2048 CARTING FROM STORE P1 QUALITY R.C.C. PRESSURE PIPES &
SPECIALS 80MM DIA., LAYING JOINTING, & TESTING WITH (1:1.5)
CEMENT & SAND MORTAR JOINTS. 141.25 RM
157
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2049 SAME AS ITEM 2048 BUT 100 MM DIA. 170.09 RM
2050 SAME AS ITEM 2048 BUT 150 MM DIA. 207.02 RM
2051 SAME AS ITEM 2048 BUT 250 MM DIA. 258.92 RM
2052 SAME AS ITEM 2048 BUT 300 MM DIA. 290.62 RM
2053 SAME AS ITEM 2048 BUT P2 QUALITY 80 MM DIA. PIPES. 141.25 RM
2054 SAME AS ITEM 2049 BUT P2 QUALITY 100MM DIA. PIPES. 170.14 RM
2055 SAME AS ITEM 2050 BUT P2 QUALITY 150MM DIA. PIPES. 207.02 RM
2056 SAME AS ITEM 2055 BUT P2 QUALITY 250MM DIA. PIPES. 265.34 RM
2057 SAME AS ITEM 2055 BUT P2 QUALITY 300MM DIA. PIPES. 308.49 RM
2058 SAME AS ITEM 2055 BUT P2 QUALITY 350MM DIA. PIPES. 405.16 RM
2059 SAME AS ITEM 2055 BUT P2 QUALITY 400MM DIA. PIPES. 468.00 RM
2060 SAME AS ITEM 2055 BUT P2 QUALITY 450MM DIA. PIPES. 519.73 RM
2061 SAME AS ITEM 2055 BUT P2 QUALITY 500MM DIA. PIPES. 614.04 RM
2062 SAME AS ITEM 2055 BUT P2 QUALITY 600MM DIA. PIPES. 761.17 RM
2063 SAME AS ITEM 2048 BUT P3 QUALITY 80 MM DIA. PIPES. 141.25 RM
2064 SAME AS ITEM 2049 BUT P3 QUALITY 100MM DIA. PIPES. 170.09 RM
2065 SAME AS ITEM 2050 BUT P3 QUALITY 150MM DIA. PIPES. 207.02 RM
2066 SAME AS ITEM 2065 BUT 250MM DIA. PIPES. 276.25 RM
2067 SAME AS ITEM 2065 BUT 300MM DIA. PIPES. 321.31 RM
2068 SAME AS ITEM 2065 BUT 350MM DIA. PIPES. 421.40 RM
2069 SAME AS ITEM 2065 BUT 400MM DIA. PIPES. 482.93 RM
2070 CARTING OF C.I.S & S AND FLANGED (CLASS `LA' AND `A') PIPES &
SPECIALS FROM STORE, LAYING, JOINTING & TESTING ETC. 80MM DIA. 38.97 RM
2071 SAME AS 2070 BUT 100MM DIA. PIPES. 49.50 RM
2072 SAME AS 2070 BUT 125MM DIA. PIPES. 63.97 RM
2073 SAME AS 2070 BUT 150MM DIA. PIPES. 79.84 RM
2074 SAME AS 2070 BUT 200MM DIA. PIPES. 116.76 RM
2075 SAME AS 2070 BUT 250MM DIA. PIPES. 157.15 RM
2076 SAME AS 2070 BUT 300MM DIA. PIPES. 203.18 RM
2077 SAME AS 2070 BUT C.I. SCREWED FLANGED PIPES (CLASS 'A') 80 MM
DIA. 44.16 RM
2078 SAME AS 2077 BUT 100 MM DIA. 55.79 RM
2079 SAME AS 2077 BUT 125 MM DIA. 72.13 RM
2080 SAME AS 2077 BUT 150 MM DIA. 90.35 RM
2081 SAME AS 2077 BUT 200 MM DIA. 130.27 RM
2082 SAME AS 2077 BUT 250 MM DIA. 174.89 RM
2083 SAME AS 2077 BUT 300 MM DIA. 224.88 RM
2084 C.I. FLANGED PIPES VERTICALLY CAST CLASS (A) - SAME RATES AS
FOR ITEMS 2077 TO 2083. RM
2085 SAME AS ITEM 2070 BUT 350 MM DIA. 246.27 RM
2086 SAME AS ITEM 2070 BUT 400 MM DIA. 299.43 RM
2087 SAME AS ITEM 2070 BUT 450 MM DIA. 360.89 RM
2088 SAME AS ITEM 2070 BUT 500 MM DIA. 423.29 RM
2089 SAME AS ITEM 2070 BUT 600 MM DIA. 563.59 RM
2090 SAME AS ITEM 2070 BUT 700 MM DIA. 727.66 RM
2091 SAME AS ITEM 2070 BUT 750 MM DIA. 814.98 RM
2092 SAME AS ITEM 2085 BUT C.I. FLANGED PIPES (VERTICALLY CAST
CLASS - A) 350 MM DIA. 273.85 RM
2093 SAME AS ITEM 2085 BUT FOR 400 MM DIA. 336.03 RM
2094 SAME AS ITEM 2085 BUT FOR 450 MM DIA. 404.25 RM
2095 SAME AS ITEM 2085 BUT FOR 500 MM DIA. 471.22 RM
2096 SAME AS ITEM 2085 BUT FOR 600 MM DIA. 630.40 RM
2097 SAME AS ITEM 2085 BUT FOR 700 MM DIA. 818.08 RM
2098 SAME AS ITEM 2085 BUT FOR 750 MM DIA. 920.68 RM
2099 SAME AS ITEM 2070 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
800 MM DIA. 923.30 RM
2100 SAME AS ITEM 2070 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
900 MM DIA. 1126.60 RM
2101 SAME AS ITEM 2070 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
1000MM DIA. 1355.16 RM
158
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2102 SAME AS ITEM 2099 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
800 MM DIA. 976.94 RM
2103 SAME AS ITEM 2099 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
900 MM DIA. 1185.08 RM
2104 SAME AS ITEM 2099 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
1000MM DIA. 1433.47 RM
2105 SAME AS ITEM 2070 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
1100MM DIA. 1477.13 RM
2106 SAME AS ITEM 2070 BUT C.I.S. & S PIPES (VERTICALLY CAST CLASS A)
1200MM DIA. 1721.66 RM
2107 CARTING FROM STORE CLASS 'A' C.I. SEREWED FLANGED SPUN PIPES
& CLASS 'A' VERTICALLY CAST PIPES, SPECIALS & FITTINGS, HOISTING
& ERECTING IN VERTICAL POSITION (UPTO 8 M HIGHT) 80 MM DIA. 157.53 RM
2108 SAME AS ITEM 2107 BUT 100 DIA. 195.54 RM
2109 SAME AS ITEM 2107 BUT 125 DIA. 256.42 RM
2110 SAME AS IETM 2107 BUT 150 DIA. 321.72 RM
2111 SAME AS IETM 2107 BUT 200 DIA. 463.39 RM
2112 SAME AS ITEM 2107 BUT 250 DIA. 622.69 RM
2113 SAME AS IETM 2107 BUT 300 DIA. 804.51 RM
2114 SAME AS IETM 2107 BUT 8.0 - 16.0 HIGH 80 MM DIA. 266.58 RM
2115 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 100MM DIA. 336.23 RM
2116 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 125MM DIA. 433.13 RM
2117 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 150MM DIA. 542.89 RM
2118 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 200MM DIA. 784.13 RM
2119 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 250MM DIA. 1052.61 RM
2120 SAME AS ITEM 2107 BUT 8.0 - 16.0 HIGH 300MM DIA. 1359.31 RM
2121 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 80 MM DIA. 434.95 RM
2122 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 100MM DIA. 542.72 RM
2123 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 125MM DIA. 709.04 RM
2124 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 150MM DIA. 887.20 RM
2125 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 200MM DIA. 1279.34 RM
2126 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 250MM DIA. 1719.74 RM
2127 SAME AS ITEM 2107 BUT 16.0 - 24.0 HIGH 300MM DIA. 2219.64 RM
2128 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 350 MM DIA. 1086.53 RM
2129 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 400 MM DIA. 1335.71 RM
2130 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 450 MM DIA. 1605.99 RM
2131 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 500 MM DIA. 1871.37 RM
2132 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 600 MM DIA. 2500.49 RM
2133 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 700 MM DIA. 3246.87 RM
2134 SAME AS ITEM 2107 BUT VERTICALLY CAST PIPES 750 MM DIA. 3655.15 RM
2135 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 350 MM DIA. 1484.73 RM
2136 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 400 MM DIA. 1823.60 RM
2137 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 450 MM DIA. 2193.54 RM
2138 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 500 MM DIA. 2557.08 RM
2139 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 600 MM DIA. 3419.46 RM
2140 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 700 MM DIA. 4438.30 RM
2141 SAME AS ITEM 2128 BUT 8.0 - 16.0 HIGH FOR 750 MM DIA. 4994.64 RM
2142 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 350 MM DIA. 2381.27 RM
2143 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 400 MM DIA. 2905.60 RM
2144 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 450 MM DIA. 3495.67 RM
2145 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 500 MM DIA. 4076.60 RM
2146 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 600 MM DIA. 5447.86 RM
2147 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 700 MM DIA. 7072.93 RM
2148 SAME AS ITEM 2128 BUT 16.0 - 24.0 HIGH FOR 750 MM DIA. 7959.56 RM
2149 CARTING, LAYING & TESTING OF STEEL CYLENDER REINFORCED
CONCRETE PIPES CLASS 3 AND SPECIALS 200 MM DIA. 167.96 RM
2150 SAME AS ITEM 2149 BUT 250 MM DIA. 218.73 RM
2151 SAME AS ITEM 2149 BUT 300 MM DIA. 253.62 RM
2152 SAME AS ITEM 2149 BUT 350 MM DIA. 304.60 RM
2153 SAME AS ITEM 2149 BUT 400 MM DIA. 356.24 RM
2154 SAME AS ITEM 2149 BUT 450 MM DIA. 438.78 RM
159
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2155 SAME AS ITEM 2149 BUT 500 MM DIA. 498.37 RM
2156 SAME AS ITEM 2149 BUT 600 MM DIA. 611.81 RM
2157 SAME AS ITEM 2149 BUT 700 MM DIA. 756.33 RM
2158 SAME AS ITEM 2149 BUT 900 MM DIA. 1300.41 RM
2159 SAME AS ITEM 2149 BUT 1100 MM DIA. 1716.85 RM
2160 SAME AS ITEM 2149 BUT 1200 MM DIA. 2078.71 RM
2161 MAKING LEAD & SPUN YARN JOINTS OF C.I.S & S PIPES & SPECIALS 80
MM DIA. 918.29 JNT
2162 SAME AS ITEM 2161 BUT 100 MM DIA. 1147.18 JNT
2163 SAME AS ITEM 2161 BUT 125 MM DIA. 1343.40 JNT
2164 SAME AS ITEM 2161 BUT 150 MM DIA. 1706.79 JNT
2165 SAME AS ITEM 2161 BUT 200 MM DIA. 2476.20 JNT
2166 SAME AS ITEM 2161 BUT 250 MM DIA. 2998.81 JNT
2167 SAME AS ITEM 2161 BUT 300 MM DIA. 3428.52 JNT
2168 SAME AS ITEM 2161 BUT 350 MM DIA. 4032.31 JNT
2169 SAME AS ITEM 2161 BUT 400 MM DIA. 4706.55 JNT
2170 SAME AS ITEM 2161 BUT 450 MM DIA. 6514.63 JNT
2171 SAME AS ITEM 2161 BUT 500 MM DIA. 7040.89 JNT
2172 SAME AS ITEM 2161 BUT 600 MM DIA. 8938.87 JNT
2173 SAME AS ITEM 2161 BUT 700 MM DIA. 10460.89 JNT
2174 SAME AS ITEM 2161 BUT 750 MM DIA. 11966.87 JNT
2175 SAME AS ITEM 2161 BUT 800 MM DIA. 14866.09 JNT
2176 SAME AS ITEM 2161 BUT 900 MM DIA. 16692.84 JNT
2177 SAME AS ITEM 2161 BUT 1000MM DIA. 19255.85 JNT
2178 SAME AS ITEM 2161 BUT 1100MM DIA. 21643.28 JNT
2179 SAME AS ITEM 2161 BUT 1200MM DIA. 23620.46 JNT
2180 MAKING JOINTS OF 80MM DIA. FLANGED PIPES & SPECIALS. 317.55 JNT
2181 SAME AS ITEM 2180 BUT 100 MM DIA. 446.56 JNT
2182 SAME AS ITEM 2180 BUT 125 MM DIA. 514.66 JNT
2183 SAME AS ITEM 2180 BUT 150 MM DIA. 676.05 JNT
2184 SAME AS ITEM 2180 BUT 200 MM DIA. 772.70 JNT
2185 SAME AS ITEM 2180 BUT 250 MM DIA. 1065.96 JNT
2186 SAME AS ITEM 2180 BUT 300 MM DIA. 1194.08 JNT
2187 SAME AS ITEM 2180 BUT 350 MM DIA. 1573.30 JNT
2188 SAME AS ITEM 2180 BUT 400 MM DIA. 2056.93 JNT
2189 SAME AS ITEM 2180 BUT 450 MM DIA. 2548.75 JNT
2190 SAME AS ITEM 2180 BUT 500 MM DIA. 2805.64 JNT
2191 SAME AS ITEM 2180 BUT 600 MM DIA. 3575.40 JNT
2192 SAME AS ITEM 2180 BUT 700 MM DIA. 4365.02 JNT
2193 SAME AS ITEM 2180 BUT 750 MM DIA. 4661.70 JNT
2194 SAME AS ITEM 2180 BUT 800 MM DIA. 6480.98 JNT
2195 SAME AS ITEM 2180 BUT 900 MM DIA. 7452.22 JNT
2196 SAME AS ITEM 2180 BUT 1000MM DIA. 8781.79 JNT
2197 CARTING, LAYING & TESTING OF C.I.S & S CLASS 'LA' TYTON JOINT &
LEAD JOINT PIPES & SPECIALS 80 MM DIA. 31.73 RM
2198 SAME AS ITEM 2097 BUT 100 MM DIA. 40.64 RM
2199 SAME AS ITEM 2097 BUT 125 MM DIA. 52.64 RM
2200 SAME AS ITEM 2097 BUT 150 MM DIA. 65.74 RM
2201 SAME AS ITEM 2097 BUT 200 MM DIA. 95.88 RM
2202 SAME AS ITEM 2097 BUT 250 MM DIA. 129.38 RM
2203 SAME AS ITEM 2097 BUT 300 MM DIA. 167.11 RM
2204 SAME AS ITEM 2097 BUT 350 MM DIA. 192.28 RM
2205 SAME AS ITEM 2097 BUT 400 MM DIA. 233.34 RM
2206 SAME AS ITEM 2097 BUT 450 MM DIA. 281.99 RM
2207 SAME AS ITEM 2097 BUT 500 MM DIA. 330.51 RM
2208 SAME AS ITEM 2097 BUT 600 MM DIA. 439.62 RM
2209 SAME AS ITEM 2097 BUT 700 MM DIA. 568.11 RM
2210 SAME AS ITEM 2097 BUT 750 MM DIA. 636.35 RM
2211 MAKE SPECIAL RUBBER GASKET TYTON JOINT C.I.S. & S PIPES &
SPECIALS ALL CLASSES 80 MM OR 100 MM DIA. 38.71 JNT
2212 SAME AS ITEM 2211 BUT 125 OR 150 MM DIA. 54.05 JNT
2213 SAME AS ITEM 2211 BUT 200 MM DIA. 65.83 JNT
160
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2214 SAME AS ITEM 2211 BUT 250 MM DIA. 82.69 JNT
2215 SAME AS ITEM 2211 BUT 300 MM DIA. 111.19 JNT
2216 SAME AS ITEM 2211 BUT 350 MM DIA. 140.10 JNT
2217 SAME AS ITEM 2211 BUT 400 MM DIA. 168.54 JNT
2218 SAME AS ITEM 2211 BUT 450 MM DIA. 190.71 JNT
2219 SAME AS ITEM 2211 BUT 500 MM DIA. 220.98 JNT
2220 SAME AS ITEM 2211 BUT 600 MM DIA. 241.12 JNT
2221 SAME AS ITEM 2211 BUT 700 MM DIA. 294.34 JNT
2222 SAME AS ITEM 2211 BUT 750 MM DIA. 346.13 JNT
2223 MAKING RUBBER RING FLANGED JOINTS (USING C.I. DETACHABLE
JOINTS) A.C.PRESURE PIPES & C.I. PLAIN ENDED SPECIALS ALL
CLASSES 50, 80 OR 100 MM DIA. 38.71 JNT
2224 SAME AS ITEM 2223 BUT 125 OR 150 MM DIA. 54.05 JNT
2225 SAME AS ITEM 2223 BUT 200 MM DIA. 65.83 JNT
2226 SAME AS ITEM 2223 BUT 250 MM DIA. 82.69 JNT
2227 SAME AS ITEM 2223 BUT 300 MM DIA. 111.19 JNT
2228 MAKING JOINTS OF STEEL CYLINDER REINFORCED CONCRET PIPES
OF CLASS III & SPECIAL 200 MM DIA. 2042.93 JNT
2229 SAME AS ITEM 2228 BUT 250 MM DIA. 2814.77 JNT
2230 SAME AS ITEM 2228 BUT 300 MM DIA. 3350.20 JNT
2231 SAME AS ITEM 2228 BUT 350 MM DIA. 4213.84 JNT
2232 SAME AS ITEM 2228 BUT 400 MM DIA. 4799.42 JNT
2233 SAME AS ITEM 2228 BUT 450 MM DIA. 5863.97 JNT
2234 SAME AS ITEM 2228 BUT 500 MM DIA. 6531.61 JNT
2235 SAME AS ITEM 2228 BUT 600 MM DIA. 7773.01 JNT
2236 SAME AS ITEM 2228 BUT 700 MM DIA. 9540.24 JNT
2237 SAME AS ITEM 2228 BUT 900 MM DIA. 12891.27 JNT
2238 SAME AS ITEM 2228 BUT 1100MM DIA. 15001.85 JNT
2239 SAME AS ITEM 2228 BUT 1200MM DIA. 17415.82 JNT
2240 RATE TO REGULATE PAYMENT OF EXCESS NO. 1:1.5 CEMENT MORTAR
JOINTS IN 80 MM SIZE P1 QUALITY R.C.C. PRESURE PIPE. 170.71 JNT
2241 SAME AS ITEM 2240 BUT FOR 100 MM DIA. 203.54 JNT
2242 SAME AS ITEM 2240 BUT FOR 150 MM DIA. 231.10 JNT
2243 SAME AS ITEM 2240 BUT FOR 250 MM DIA. 268.00 JNT
2244 SAME AS ITEM 2240 BUT FOR 300 MM DIA. 353.41 JNT
2245 SAME AS ITEM 2240 BUT P2 QUALITY PIPES 80 MM DIA. 170.71 JNT
2246 SAME AS ITEM 2241 BUT P2 QUALITY PIPES 100 MM DIA. 203.54 JNT
2247 SAME AS ITEM 2242 BUT P2 QUALITY PIPES 150 MM DIA. 231.10 JNT
2248 SAME AS ITEM 2247 BUT 250 MM DIA. 272.14 JNT
2249 SAME AS ITEM 2247 BUT 300 MM DIA. 365.80 JNT
2250 SAME AS ITEM 2247 BUT 350 MM DIA. 418.09 JNT
2251 SAME AS ITEM 2247 BUT 400 MM DIA. 475.34 JNT
2252 SAME AS ITEM 2247 BUT 450 MM DIA. 566.37 JNT
2253 SAME AS ITEM 2247 BUT 500 MM DIA. 617.53 JNT
2254 SAME AS ITEM 2247 BUT 600 MM DIA. 724.89 JNT
2255 SAME AS ITEM 2240 BUT FOR P3 QUALITY PIPES 80 MM DIA. 170.71 JNT
2256 SAME AS ITEM 2241 BUT FOR P3 QUALITY PIPES 100MM DIA. 203.54 JNT
2257 SAME AS ITEM 2242 BUT FOR P3 QUALITY PIPES 150MM DIA. 231.10 JNT
2258 SAME AS ITEM 2257 BUT FOR 250 MM DIA. 276.61 JNT
2259 SAME AS ITEM 2257 BUT FOR 300 MM DIA. 374.14 JNT
2260 SAME AS ITEM 2257 BUT FOR 350 MM DIA. 440.03 JNT
2261 SAME AS ITEM 2257 BUT FOR 400 MM DIA. 500.26 JNT
2262 RATE TO REGULATE PAYMENT FOR MAKING LEAD & SPUN YARN
JOINTS IN R.C.C. P1 QUALITY PIPES 80 MM DIA. 1193.78 JNT
2263 SAME AS ITEM 2262 BUT 100 MM DIA. 1434.04 JNT
2264 SAME AS ITEM 2262 BUT 150 MM DIA. 1997.28 JNT
2265 SAME AS ITEM 2262 BUT 250 MM DIA. 3358.67 JNT
2266 SAME AS ITEM 2262 BUT 300 MM DIA. 3771.37 JNT
2267 SAME AS ITEM 2262 BUT PC QUALITY PIPES 80 MM DIA. 1193.78 JNT
2268 SAME AS ITEM 2263 BUT 100 MM DIA. 1434.04 JNT
2269 SAME AS ITEM 2264 BUT 150 MM DIA. 1997.28 JNT
2270 SAME AS ITEM 2264 BUT 250 MM DIA. 3388.78 JNT
161
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2271 SAME AS ITEM 2264 BUT 300 MM DIA. 3977.08 JNT
2272 SAME AS ITEM 2264 BUT 350 MM DIA. 4637.21 JNT
2273 SAME AS ITEM 2264 BUT 400 MM DIA. 5459.59 JNT
2274 SAME AS ITEM 2264 BUT 450 MM DIA. 7427.49 JNT
2275 SAME AS ITEM 2264 BUT 500 MM DIA. 8026.77 JNT
2276 SAME AS ITEM 2264 BUT 600 MM DIA. 10279.70 JNT
2277 SAME AS ITEM 2262 BUT P3 QUALITY PIPES 80 MM DIA. 1193.78 JNT
2278 SAME AS ITEM 2263 BUT 100 MM DIA. 1434.04 JNT
2279 SAME AS ITEM 2264 BUT 150 MM DIA. 1997.28 JNT
2280 SAME AS ITEM 2264 BUT 250 MM DIA. 3478.46 JNT
2281 SAME AS ITEM 2264 BUT 300 MM DIA. 4114.22 JNT
2282 SAME AS ITEM 2264 BUT 350 MM DIA. 4879.15 JNT
2283 SAME AS ITEM 2264 BUT 400 MM DIA. 5789.05 JNT
2284 CUTTING 15 - 25 MM DIA. M.M. GALVANISED PIPES INCLUDING
THREADING, SHAPING & FINISHING THE ENDS. 28.77 CUT
2285 SAME AS ITEM 2284 BUT 32 TO 50 MM DIA. 42.80 CUT
2286 SAME AS ITEM 2284 BUT 65 TO 80 MM DIA. 57.21 CUT
2287 SAME AS ITEM 2284 BUT 100 TO 150 MM DIA. 115.97 CUT
2288 CUTTING 50-100 MM DIA A.C. PIPE INCLUDING SHAPING & FINISHING
THE ENDS. 89.57 CUT
2289 SAME AS ITEM 2288 BUT 125 OR 150 MM DIA. 119.33 CUT
2290 SAME AS ITEM 2288 BUT 200 OR 250 MM DIA. 179.00 CUT
2291 SAME AS ITEM 2288 BUT 300 MM DIA. 238.66 CUT
2292 CUTTING C.I. (SPUN) PIPES (CLASS LA AND A) OR SPECIALS
INCLUDING SHAPING & FINISHING THE ENDS 80 TO 300 MM DIA. 298.91 CUT
2293 SAME AS ITEM 2292 BUT 350 TO 750 MM DIA. 953.70 CUT
2294 SAME AS ITEM 2292 BUT 800 TO 1000 MM DIA. 2200.52 CUT
2295 SAME AS ITEM 2292 BUT 1100 TO 1200 MM DIA. 3566.84 CUT
2296 CUTTING 200 TO 400 MMD DIA. STEEL CYLINDER R.C.C. PIPES &
SPECIALS INCLUDING SHAPING & FINISHING THE ENDS. 820.40 CUT
2297 SAME AS 2296 BUT 450 TO 600 MM DIA. 1715.31 CUT
2298 SAME AS 2296 BUT 700 TO 900 MM DIA. 3505.34 CUT
2299 SAME AS 2296 BUT 1100 TO 1200 MM DIA. 5220.41 CUT
2300 MAKING CONNECTION WITH EXISTING M.S. GALVANISED MAINS UPTO
25 MM DIA. 894.96 CONN
2301 SAME AS ITEM 2300 BUT 32 TO 40 MM DIA. 1194.35 CONN
2302 SAME AS ITEM 2300 BUT 50 TO 80 MM DIA. 1566.18 CONN
2303 SAME AS ITEM 2300 BUT 100 TO 150 MM DIA. 2908.57 CONN
2304 CUTTING EXISTING A.C. MAINS 50 TO 125 MM DIA., MAKING
CONNECTION, BAILING OUT OF WATER ETC. 2504.63 CONN
2305 SAME AS ITEM 2304 BUT 150 TO 300 MM DIA. 4098.57 CONN
2306 CUTTING OF EXISTING 80 TO 150 MM DIA. S & S OR FLANGED C.I.
RUNNING MAINS, MAKING CONNECTION, BAILING OUT OF WATER ETC. 1907.40 CONN
2307 SAME AS ITEM 2306 BUT 200 TO 300 MM DIA. 4627.79 CONN
2308 SAME AS ITEM 2306 BUT 350 TO 450 MM DIA. 7929.03 CONN
2309 SAME AS ITEM 2306 BUT 500 TO 600 MM DIA. 10294.11 CONN
2310 SAME AS ITEM 2306 BUT 700 TO 750 MM DIA. 13735.23 CONN
2311 SAME AS ITEM 2306 BUT 800 TO 1000 MM DIA. 20250.23 CONN
2312 SAME AS ITEM 2306 BUT 1100 TO 12000 MM DIA. 24471.74 CONN
2313 DISMANTLING 15 MM DIA. SCREWED & SOCKETED M.S. GALVANISED
PIPES, SPECIALS & FITTINGS INCLUDING TAKEN OUT FROM INTERNAL
WORKS. 64.60 RM
2314 SAME AS ITEM 2313 BUT 20 MM DIA. 90.52 RM
2315 SAME AS ITEM 2313 BUT 25 MM DIA. 135.77 RM
2316 SAME AS ITEM 2313 BUT 32 MM DIA. 170.89 RM
2317 SAME AS ITEM 2313 BUT 40 MM DIA. 191.18 RM
2318 SAME AS ITEM 2313 BUT TAKEN OUT FROM TRENCHES 15 MM DIA. 23.40 RM
2319 SAME AS ITEM 2318 BUT 20 MM DIA. 32.67 RM
2320 SAME AS ITEM 2318 BUT 25 MM DIA. 45.79 RM
2321 SAME AS ITEM 2318 BUT 32 MM DIA. 59.36 RM
2322 SAME AS ITEM 2318 BUT 40 MM DIA. 64.61 RM
162
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2323 SAME AS ITEM 2318 BUT 50 MM DIA. 85.55 RM
2324 SAME AS ITEM 2318 BUT 65 MM DIA. 108.99 RM
2325 SAME AS ITEM 2318 BUT 80 MM DIA. 134.88 RM
2326 SAME AS ITEM 2318 BUT 100 MM DIA. 177.91 RM
2327 SAME AS ITEM 2318 BUT 125 MM DIA. 220.93 RM
2328 SAME AS ITEM 2318 BUT 150 MM DIA. 262.56 RM
2329 TAKING OUT 50 OR 80 MM DIA. A.C. PR. PIPES, SPECIALS & FITTINGS
163
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2376 SAME AS ITEM 2359 BUT C.I. S & S PIPES (SPUN CLASS LA LEAD YARN
164
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
2429 INSERTING & FIXING WATER METER OR FITTING SUCH AS STOP
COCKS, WHEEL VALVE ETC. UPTO 25 MM DIA. IN EXISTING M.S.
GALVANISED PIPES. 730.91 CONN
2430 SAME AS ITEM 2429 BUT 32 - 40 MM DIA. 1073.03 CONN
2431 SAME AS ITEM 2429 BUT 50 - 80 MM DIA. 1491.57 CONN
2432 SAME AS ITEM 2429 BUT 100-150 MM DIA. 2684.88 CONN
2433 FIXING OF 10 - 15 MM SIZE BRASS FERRULE IN EXISTING C.I. OR M.S.
GALVANISED PIPE (50 MM & ABOVE). 894.96 CONN
2434 SAME AS ITEM 2433 20 - 25 MM . 1266.76 CONN
2435 SAME AS ITEM 2433 32 - 50 MM . 1640.79 CONN
2436 CARTING & PLACING OF C.I. M.H. HEAVY DUTTY 500 - 560 MM (CLEAR
OPENING) SIZE. 1016.84 NO.
2437 SAME AS ITEM 2346 BUT MEDIUM DUTY (SIZE 610 X 445 MM ). 688.22 NO.
2438 SAME AS ITEM 2346 BUT LIGHT DUTTY RECTANGULAR. 425.73 NO.
2439 SAME AS ITEM 2436 BUT MEDIUM OR LIGHT DUTY FOR STANDARD SIZE
(250 - 455 MM). 360.18 NO.
2440 CARTAGE & FIXING OF C.I. OR M.S. SURFACE BOX UPTO 200 MM DIA.
268.92 NO.
2441 MAKING I.S.S. THREADS IN 15 - 25 MM DIA. GALVANISED M.S. PIPES.
43.21 END
2442 SAME AS ITEM 2441 BUT 32 - 50 MM DIA. 72.76 END
2443 SAME AS ITEM 2441 BUT 65 - 80 MM DIA. 115.97 END
2444 SAME AS ITEM 2441 BUT 100 - 150 MM DIA. 227.30 END
2445 CARTAGE & FIXING OF SLUICE VALVE OR REFLUX VALVE 50 - 125 MM
DIA. 486.08 NO.
2446 SAME AS ITEM BUT 150 - 200 MM DIA. 790.53 NO.
2447 SAME AS ITEM BUT 250 - 300 MM DIA. 1509.95 NO.
2448 SAME AS ITEM BUT 350 - 400 MM DIA. 2066.35 NO.
2449 SAME AS ITEM BUT 450 - 600 MM DIA. 2940.50 NO.
2450 CARTING & FIXING OF 20 - 25 SCREWED DOWN AIR VALVE IN C.I.
MAINS. 820.40 NO.
2451 SAME AS ITEM 2450 BUT 65 - 80 MM DIA. FLANGED AIR VALVE OR FIRE
HYDRANT OVER EXISTING FLANGED TEE. 397.52 NO.
2452 BORING OF 150 MM DIA. BY PALM & PRESSURE METHOD 0-30 M. DEEP.
591.65 RM
2453 SAME AS ITEM 2452 BUT 31-50 M. DEEP. 654.43 RM
2454 BORING OF 150 MM DIA. BY CASING METHOD 0-30 M. DEEP INCLUDING
EXTRACTION OF CASING PIPE. 887.48 RM
2455 SAME AS ITEM 2454 BUT 31-50 M. DEEP. 981.64 RM
2456 LOWERING OF HAND PUMP ASSEMBLY 0-45 M. DEEP. 22.41 RM
2457 INSTALLATION & DEVELOPMENT OF HAND PUMP. 3115.24 NO.
2458 HIRE CHARGES OF BORING T & P AND CARTAGE OF HAND PUMP
MATERIAL BY TRACTOR TROLLEY. L.S.
2459 FILLING COARSE SAND ROUND THE HAND PUMP ASSEMBLY (EXCLUDE
COST OF SAND). 313.87 CUM
165
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
(C) SEWERAGE & DRAINAGE WORKS:
3001 EXCAVATION 0.0 - 1.5M DEEP IN ORDINARY SOIL. 269.94 CUM
3002 EXCAVATION 1.5 - 3.0M DEEP IN ORDINARY SOIL. 340.06 CUM
3003 EXCAVATION 3.0 - 4.5M DEEP IN ORDINARY SOIL. 427.41 CUM
3004 EXCAVATION 4.5 - 6.0M DEEP IN ORDINARY SOIL. 500.04 CUM
3005 EXCAVATION 6.0 - 7.5M DEEP IN ORDINARY SOIL. 653.78 CUM
3006 EXCAVATION 7.5 - 9.0M DEEP IN ORDINARY SOIL. 859.32 CUM
3007 EXCAVATION 0.0 - 1.5M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3001). 40.52 CUM
3008 EXCAVATION 1.5 - 3.0M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3002). 65.82 CUM
3009 EXCAVATION 3.0 - 4.5M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3003). 92.10 CUM
3010 EXCAVATION 4.5 - 6.0M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3004). 117.37 CUM
3011 EXCAVATION 6.0 - 7.5M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3005). 142.70 CUM
3012 EXCAVATION 7.5 - 9.0M DEEP IN SOIL MIXED WITH MOORUM, SHINGLE,
KANKAR ETC.(EXTRA OVER ITEM 3006). 176.49 CUM
3013 EXCAVATION 0.0 - 1.5M DEEP IN HARD ROCK BY CHISELLING. 1725.27 CUM
3014 EXCAVATION 1.5 - 3.0M DEEP IN HARD ROCK BY CHISELLING. 1908.86 CUM
3015 EXCAVATION 3.0 - 4.5M DEEP IN HARD ROCK BY CHISELLING. 2120.63 CUM
3016 EXCAVATION 4.5 - 6.0M DEEP IN HARD ROCK BY CHISELLING. 2363.90 CUM
3017 EXCAVATION 6.0 - 7.5M DEEP IN HARD ROCK BY CHISELLING. 2702.17 CUM
3018 EXCAVATION 7.5 - 9.0M DEEP IN HARD ROCK BY CHISELLING. 3047.60 CUM
3019 EXCAVATION 0.0 - 1.5 DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 1374.91 CUM
3020 EXCAVATION 1.5 - 3.0 DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 1513.63 CUM
3021 EXCAVATION 3.0 - 4.5M DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 1696.95 CUM
3022 EXCAVATION 4.5 - 6.0M DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 1896.90 CUM
3023 EXCAVATION 6.0 - 7.5M DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 2090.49 CUM
3024 EXCAVATION 7.5 - 9.0M DEEP IN MEDIUM ROCK BY CHISELLING OR BY
MILD BLASTING. 2355.55 CUM
3025 EXCAVATION 0.0 - 1.5M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 1253.82 CUM
3026 EXCAVATION 1.5 - 3.0M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 1448.50 CUM
3027 EXCAVATION 3.0 - 4.5M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 1666.68 CUM
3028 EXCAVATION 4.5 - 6.0M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 1939.00 CUM
3029 EXCAVATION 6.0 - 7.5M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 2356.27 CUM
3030 EXCAVATION 7.5 - 9.0M DEEP IN DECOMPOSED OR SOFT ROCK BY
CHISELLING. 2910.87 CUM
3031 BAILING OUT OR PUMPING OUT SUBSOIL WATER. 120.42 CUM
3032 CLOSE TIMBERING IN TRENCHES 0.0 - 3.0M DEEP. 888.25 SQM
3033 CLOSE TIMBERING IN TRENCHES 3.0 - 6.0M DEEP. 1133.06 SQM
3034 CLOSE TIMBERING IN TRENCHES 6.0 - 9.0M DEEP. 1285.71 SQM
3035 CLOSE TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 0.0 - 3.0M
DEEP. 5060.13 SQM
3036 CLOSE TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 3.0 - 6.0M
DEEP. 6257.39 SQM
3037 CLOSE TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 6.0 - 9.0M
DEEP. 6844.82 SQM
3038 CLOSE TIMBERING LEFT IN TRENCHES (USED TIMBERING) 0.0 - 3.0M
DEEP. 2082.05 SQM
166
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
3039 CLOSE TIMBERING LEFT IN TRENCHES (USED TIMBERING) 3.0 - 6.0M
DEEP. 2589.84 SQM
3040 CLOSE TIMBERING LEFT IN TRENCHES (USED TIMBERING) 6.0 - 9.0M
DEEP. 2852.55 SQM
3041 OPEN TIMBERING IN TRENCHES 0.0 - 3.0M DEEP. 505.96 SQM
3042 OPEN TIMBERING IN TRENCHES 3.0 - 6.0M DEEP. 648.34 SQM
3043 OPEN TIMBERING IN TRENCHES 6.0 - 9.0M DEEP. 784.25 SQM
3044 OPEN TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 0.0 - 3.0M
DEEP. 2691.62 SQM
3045 OPEN TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 3.0 - 6.0M
DEEP. 3291.76 SQM
3046 OPEN TIMBERING LEFT IN TRENCHES (UNUSED TIMBERING) 6.0 - 9.0M
DEEP. 3866.87 SQM
3047 OPEN TIMBERING LEFT IN TRENCHES (USED TIMBERING) 0.0 - 3.0M
DEEP. 1121.63 SQM
3048 OPEN TIMBERING LEFT IN TRENCHES (USED TIMBERING) 3.0 - 6.0M
DEEP. 1384.57 SQM
3049 OPEN TIMBERING LEFT IN TRENCHES (USED TIMBERING) 6.0 - 9.0M
DEEP. 1636.67 SQM
3050 SHEET PILING IN TRENCHES 0.0 - 3.0M DEEP (SCRAP VALUE OF
SHEETS & ANGLES & SALVAGE VALUE OF TIMBER WILL BE
DEDUCTED). 2663.57 SQM
3051 SHEET PILING IN TRENCHES 3.0 - 6.0M DEEP (SCRAP VALUE OF
SHEETS & ANGLES & SALVAGE VALUE OF TIMBER WILL BE
DEDUCTED). 3707.86 SQM
3052 SHEET PILING IN TRENCHES 6.0 - 9.0M DEEP (SCRAP VALUE OF
SHEETS & ANGLES & SALVAGE VALUE OF TIMBER WILL BE
DEDUCTED). 4845.52 SQM
3053 LAYING, JOINTING 100MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 367.38 RM
3054 LAYING, JOINTING 150MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 484.36 RM
3055 LAYING, JOINTING 200MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 570.27 RM
3056 LAYING, JOINTING 250MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 688.13 RM
3057 LAYING, JOINTING 300MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 853.19 RM
3058 LAYING, JOINTING 350MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 967.78 RM
3059 LAYING, JOINTING 400MM DIA. STONE WARE GLAZED PIPE 0.0 - 1.5M
DEEP. 1084.14 RM
3060 LAYING, JOINTING 200MM DIA. SEV PIPE 0.0 - 1.5M DEEP. 484.35 RM
3061 LAYING, JOINTING 250MM DIA. SEV PIPE 0.0 - 1.5M DEEP. 579.22 RM
3062 LAYING, JOINTING 300MM DIA. SEV PIPE 0.0 - 1.5M DEEP. 708.85 RM
3063 LAYING, JOINTING OF STONE WARE OR SEV PIPE 1.5 - 3.0M DEEP
(EXTRA OVER ITEMS 3053 TO 3062). 5.85%
3064 LAYING, JOINTING OF STONE WARE OR SEV PIPE 3.0 - 4.5M DEEP
(EXTRA OVER ITEMS 3053 TO 3062). 12.7%
3065 LAYING, JOINTING OF STONE WARE OR SEV PIPE 4.5 - 6.0M DEEP
(EXTRA OVER ITEMS 3053 TO 3062). 21.3%
3066 LAYING, JOINTING OF STONE WARE OR SEV PIPE 6.0 - 7.5M DEEP
(EXTRA OVER ITEMS 3053 TO 3062). 30.6%
3067 LAYING, JOINTING OF STONE WARE OR SEV PIPE 7.5 - 9.0M DEEP
(EXTRA OVER ITEMS 3053 TO 3062). 41.4%
3068 LAYING, JOINTING 100MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
265.88 RM
3069 LAYING, JOINTING 150MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
337.17 RM
3070 LAYING, JOINTING 250MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
452.50 RM
167
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
3071 LAYING, JOINTING 300MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
562.90 RM
3072 LAYING, JOINTING 350MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
665.94 RM
3073 LAYING, JOINTING 400MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
727.99 RM
3074 LAYING, JOINTING 450MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
862.15 RM
3075 LAYING, JOINTING 500MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
964.24 RM
3076 LAYING, JOINTING 600MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
1102.26 RM
3077 LAYING, JOINTING 700MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
1223.73 RM
3078 LAYING, JOINTING 800MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
1828.21 RM
3079 LAYING, JOINTING 900MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
2083.92 RM
3080 LAYING, JOINTING 1000MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
2377.36 RM
3081 LAYING, JOINTING 1100MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
2776.85 RM
3082 LAYING, JOINTING 1200MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
3188.54 RM
3083 LAYING, JOINTING 1400MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
3961.53 RM
3084 LAYING, JOINTING 1600MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
4890.17 RM
3085 LAYING, JOINTING 1800MM DIA. RCC NP2 HUME PIPE 0.0 - 1.5M DEEP.
6054.58 RM
3086 LAYING, JOINTING RCC NP2 HUME PIPE 1.5 - 3.0M DEEP (EXTRA OVER
ITEMS 3068 TO 3085). 6.45%
3087 LAYING, JOINTING RCC NP2 HUME PIPE 3.0 - 4.5M DEEP (EXTRA OVER
ITEMS 3068 TO 3085). 13.05%
3088 LAYING, JOINTING RCC NP2 HUME PIPE 4.5 - 6.0M DEEP (EXTRA OVER
ITEMS 3068 TO 3085). 20.75%
3089 LAYING, JOINTING RCC NP2 HUME PIPE 6.0 - 7.5M DEEP (EXTRA OVER
ITEMS 3068 TO 3085). 31.55%
3090 LAYING, JOINTING RCC NP2 HUME PIPE 7.5 - 9.0M DEEP (EXTRA OVER
ITEMS 3068 TO 3085). 46.15%
3091 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 100MM DIA. HUME
PIPE. 127.94 NO.
3092 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 150MM DIA. HUME
PIPE. 185.38 NO.
3093 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 250MM DIA. HUME
PIPE. 281.16 NO.
3094 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 300MM DIA. HUME
PIPE. 406.35 NO.
3095 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 350MM DIA. HUME
PIPE. 458.32 NO.
3096 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 400MM DIA. HUME
PIPE. 515.59 NO.
3097 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 450MM DIA. HUME
PIPE. 555.06 NO.
3098 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 500MM DIA. HUME
PIPE. 731.69 NO.
3099 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 600MM DIA. HUME
PIPE. 867.17 NO.
3100 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 700MM DIA. HUME
PIPE. 990.41 NO.
3101 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 800MM DIA. HUME
PIPE. 1516.08 NO.
168
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
3102 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 900MM DIA. HUME
PIPE. 1929.60 NO.
3103 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1000MM DIA. HUME
PIPE. 2376.97 NO.
3104 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1100MM DIA. HUME
PIPE. 3117.40 NO.
3105 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1200MM DIA. HUME
PIPE. 3742.86 NO.
3106 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1400MM DIA. HUME
PIPE. 4633.93 NO.
3107 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1600MM DIA. HUME
PIPE. 5376.11 NO.
3108 PRECAST CEMENT CONCRETE (1:3:6) SADDLE FOR 1800MM DIA. HUME
PIPE. 6147.21 NO.
3109 DISMANTLING 100MM DIA. OLD S.W. PIPE SEWERS. 83.23 RM
3110 DISMANTLING 150MM DIA. OLD S.W. PIPE SEWERS. 113.10 RM
3111 DISMANTLING 200MM DIA. OLD S.W. PIPE SEWERS. 155.57 RM
3112 DISMANTLING 250MM DIA. OLD S.W. PIPE SEWERS. 199.53 RM
3113 DISMANTLING 300MM DIA. OLD S.W. PIPE SEWERS. 232.07 RM
3114 DISMANTLING 400MM DIA. OLD S.W. PIPE SEWERS. 298.76 RM
3115 DISMANTLING 100MM DIA. RCC NP2 HUME PIPE SEWERS. 93.34 RM
3116 DISMANTLING 150MM DIA. RCC NP2 HUME PIPE SEWERS. 140.04 RM
3117 DISMANTLING 250MM DIA. RCC NP2 HUME PIPE SEWERS. 233.38 RM
3118 DISMANTLING 300MM DIA. RCC NP2 HUME PIPE SEWERS. 280.09 RM
3119 DISMANTLING 400MM DIA. RCC NP2 HUME PIPE SEWERS. 427.06 RM
3120 DISMANTLING 450MM DIA. RCC NP2 HUME PIPE SEWERS. 480.54 RM
3121 DISMANTLING 500MM DIA. RCC NP2 HUME PIPE SEWERS. 534.02 RM
3122 DISMANTLING 600MM DIA. RCC NP2 HUME PIPE SEWERS. 640.72 RM
3123 DISMANTLING 700MM DIA. RCC NP2 HUME PIPE SEWERS. 961.08 RM
3124 DISMANTLING 800MM DIA. RCC NP2 HUME PIPE SEWERS. 1098.22 RM
3125 DISMANTLING 900MM DIA. RCC NP2 HUME PIPE SEWERS. 1235.79 RM
3126 DISMANTLING 1000MM DIA. RCC NP2 HUME PIPE SEWERS. 1310.46 RM
3127 DISMANTLING 1100MM DIA. RCC NP2 HUME PIPE SEWERS. 1441.62 RM
3128 DISMANTLING 1200MM DIA. RCC NP2 HUME PIPE SEWERS. 1572.79 RM
3129 FIXING IND. TYPE WHITE GLAZED EARTHENWARE CLOSET &
FOOTRESTS. 1636.60 NO.
3130 FIXING EUR. TYPE WHITE GLAZED EARTHENWARE CLOSET &
FOOTRESTS. 1400.44 NO.
3131 FIXING 15 LITRES C.I. FLUSHING CISTERN. 3004.91 NO.
3132 FIXING 10 LITRES C.I. FLUSHING CISTERN. 2773.21 NO.
3133 FIXING 5 LITRES C.I. FLUSHING CISTERN. 2493.57 NO.
3134 FIXING LOW LEVEL FLUSHING CISTERN. 1848.70 NO.
3135 FIXING WHITE GLAZED EARTHENWARE URINALS & WASTE PIPE. 1282.51 NO.
3136 FIXING IND. URINAL SQUATTING OF WHITE GLAZED FIRECLAY. 3185.30 NO.
3137 FIXING 400X400 MM SIZE WASH BASIN OF WHITE GLAZED
EARTHENWARE. 989.30 NO.
3138 FIXING 450X300 MM OR 550X400 MM SIZE WASH BASIN OF WHITE
GLAZED EARTHENWARE. 1210.96 NO.
3139 FIXING 600X480 MM OR 630X450 MM SIZE WASH BASIN OF WHITE
GLAZED EARTHENWARE. 1417.31 NO.
3140 FIXING 600X450X150 MM OR 600X400X200 MM OR 600X450X250 MM OR
750X450X250 MM SIZE SINK. 1311.55 NO.
3141 FIXING 400X250X150 MM OR 450X300X150 MM OR 500X350X150 MM
SIZE SINK. 1064.23 NO.
3142 FIXING TEAKWOOD. PLASTIC OR ANY OTHER TYPE OF SEAT IN
EUROPEAN TYPE WATER CLOSET. 343.39 NO.
3143 MAKING 15 MM DIA. LEAD CONNECTION. 169.28 NO.
3144 FIXING G.I. CHAIN WITH G.I. PLUG. L.S.
3145 FIXING BRASS CHAIN AND RUBBER PLUG FOR SINK OR LAVATORY
BASIN. L.S.
3146 FIXING 750X450X40 MM THICK WOOD DRAINING BOARD WITH
SKIRTING AND HEADING. L.S.
169
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
3147 FIXING 550X450 MM OR 450X300 MM SIZE BEVELLED ON PLAIN EDGE
MIRROR. 784.72 NO.
3148 FIXING GLASS SHELF WITH SHELF WITH C.P. BRASS BRACKETS AND
GUARD RAIL. 429.57 NO.
3149 FIXING 750X20 MM OR 600X20 MM OR 450X20 MM SIZE BRASS TOWEL
RAIL. 337.47 NO.
3150 FIXING C.P. BRASS WOODEN OR GLAZED OR VITROUS CHINA "TOILET
PAPER HOLDER". 432.08 NO.
3151 FIXING 80 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS. 278.25 RM
3152 FIXING 100 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS. 349.94 RM
3153 FIXING 150 MM DIA. H.C.I. SOIL OR VENT PIPE AND SPECIALS. 498.28 RM
3154 MAKING LEAD JOINTS OF 80 MM DIA. H.C.I. PIPES AND SPECIALS. 469.75 JNT
3155 MAKING LEAD JOINTS OF 100 MM DIA. H.C.I. PIPES AND SPECIALS. 633.55 JNT
3156 MAKING LEAD JOINTS OF 150 MM DIA. H.C.I. PIPES AND SPECIALS. 926.83 JNT
3157 FIXING 50 MM DIA. A.C. SOIL OR VENT PIPE WITH SPECIALS. 292.51 RM
3158 FIXING 80 MM DIA. A.C. SOIL OR VENT PIPE WITH SPECIALS. 361.87 RM
3159 FIXING 100 MM DIA. A.C. SOIL OR VENT PIPE WITH SPECIALS. 426.90 RM
3160 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 50MM DIA. A.C. SOIL
OR VENT PIPE & SPECIALS. 196.52 JNT
3161 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 80MM DIA. A.C. SOIL
OR VENT PIPE & SPECIALS. 275.58 JNT
3162 MAKING 1:1 CEMENT AND COARSE SAND JOINT OF 100MM DIA. A.C.
SOIL OR VENT PIPE & SPECIALS. 354.58 JNT
3163 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 0.0 - 1.5M
DEEP. 11260.07 RM
3164 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 1.5 - 3.0M
DEEP. 15914.37 RM
3165 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 3.0 - 6.0M
DEEP. 21854.99 RM
3166 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 6.0 - 9.0M
DEEP. 29588.24 RM
3167 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 9.0 - 12.0M
DEEP. 35482.80 RM
3168 SINKING OF WELL 2.5M DIA. (EXTERNAL) IN ORDINARY SOIL 12.0 -
15.0M DEEP. 39672.86 RM
3169 SAME AS ITEM 3163 TO 3168 BUT FOR OTHER DIAMETERS (THE RATES
SHALL BE PROPORTIONAL TO THEIR AREAS). RM
3170 SAME AS ITEM 3163 TO 3169 BUT FOR SOFT CLAY (EXTRA OVER ITEMS
3163 TO 3169). 25%
3171 SAME AS ITEM 3163 TO 3169 BUT FOR HARD CLAY (EXTRA OVER ITEMS
3163 TO 3169). 50%
3172 SAME AS ITEM 3163 TO 3169 BUT FOR KANKAR, SHINGLES (EXTRA
OVER ITEMS 3163 TO 3169). 75%
3173 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. I. 455.15 RM
3174 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. II. 525.99 RM
3175 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. III. 592.17 RM
3176 KERB & CHANNEL (K&C) DRAINS (ORDINARY) NO. IV. 754.22 RM
3177 100MM DIA. C.C. SEMI CIRCULAR DRAIN. 1017.80 RM
3178 150MM DIA. C.C. SEMI CIRCULAR DRAIN. 1102.26 RM
3179 250MM DIA. C.C. SEMI CIRCULAR DRAIN. 1388.34 RM
3180 300MM DIA. C.C. SEMI CIRCULAR DRAIN. 1528.82 RM
3181 400MM DIA. C.C. SEMI CIRCULAR DRAIN. 1787.58 RM
3182 450MM DIA. C.C. SEMI CIRCULAR DRAIN. 2123.97 RM
3183 DISMANTLING & MAKING CONNECTION OF 100MM OR 150MM DIA.
DRAIN PIPE WITH C.C. 1:2:4. 477.37 CONN
3184 DISMANTLING & MAKING CONNECTION OF 200,250 & 300MM DIA. DRAIN
PIPE WITH C.C. 1:2:4. 781.07 CONN
3185 DISMANTLING & MAKING CONNECTION OF 350,400 & 450MM DIA. DRAIN
PIPE WITH C.C. 1:2:4. 1187.47 CONN
3186 FIXING R.C.C. SPUN VENTILATING COLUMN 9.0M LONG. 12147.01 NO.
3187 FIXING C.I. FOOTSTEPS IN THE WALLS. 527.36 NO.
170
CODE DESCRIPTION RATE in Rs. UNIT
1 2 3 4
3188 FIXING 375X175X40MM (SECTION) R.C.C. FOOTSTEPS WITH 16MM DIA.
BAR. 419.21 NO.
3189 EXTRA OVER ITEMS OF CONCRETE, BRICK WORK, D.P.C., PLASTER,
POINTING, FLOORING, DEMOLITION & DISMANTLING WORKS OF
SCHEDULE OF RATES FOR BUILDING, ROADS & W/S IF EXECUTED
FROM 1.5 - 3.0M DEEP. 3%
3190 EXTRA OVER ITEMS OF CONCRETE, BRICK WORK, D.P.C., PLASTER,
POINTING, FLOORING, DEMOLITION & DISMANTLING WORKS OF
SCHEDULE OF RATES FOR BUILDING, ROADS & W/S IF EXECUTED
FROM 3.0 - 4.5M DEEP. 7%
3191 EXTRA OVER ITEMS OF CONCRETE, BRICK WORK, D.P.C., PLASTER,
POINTING, FLOORING, DEMOLITION & DISMANTLING WORKS OF
SCHEDULE OF RATES FOR BUILDING, ROADS & W/S IF EXECUTED
FROM 4.5 - 6.0M DEEP. 12%
3192 EXTRA OVER ITEMS OF CONCRETE, BRICK WORK, D.P.C., PLASTER,
POINTING, FLOORING, DEMOLITION & DISMANTLING WORKS OF
SCHEDULE OF RATES FOR BUILDING, ROADS & W/S IF EXECUTED
FROM 6.0 - 7.5M DEEP. 20%
3193 EXTRA OVER ITEMS OF CONCRETE, BRICK WORK, D.P.C., PLASTER,
POINTING, FLOORING, DEMOLITION & DISMANTLING WORKS OF
SCHEDULE OF RATES FOR BUILDING, ROADS & W/S IF EXECUTED
FROM 7.5 - 9.0M DEEP. 30%
3194 LAYING, JOINTING 350MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
1119.58 RM
3195 LAYING, JOINTING 400MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
1225.43 RM
3196 LAYING, JOINTING 450MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
1514.23 RM
3197 LAYING, JOINTING 500MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
1644.48 RM
3198 LAYING, JOINTING 600MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
1811.21 RM
3199 LAYING, JOINTING 700MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
2131.32 RM
3200 LAYING, JOINTING 800MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
3059.84 RM
3201 LAYING, JOINTING 900MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
3624.67 RM
3202 LAYING, JOINTING 1000MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
4237.05 RM
3203 LAYING, JOINTING 1100MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
5186.30 RM
3204 LAYING, JOINTING 1200MM DIA. R.C.C. NP3 HUME PIPE 0.0 - 1.5M DEEP.
5863.53 RM
3205 LAYING, JOINTING R.C.C. NP3 HUME PIPE 1.5 - 3.0M DEEP (EXTRA OVER
ITEMS 3194 TO 3204). 6.45%
3206 LAYING, JOINTING R.C.C. NP3 HUME PIPE 3.0 - 4.5M DEEP (EXTRA OVER
ITEMS 3194 TO 3204). 13.05%
3207 LAYING, JOINTING R.C.C. NP3 HUME PIPE 4.5 - 6.0M DEEP (EXTRA OVER
ITEMS 3194 TO 3204). 20.75%
3208 LAYING, JOINTING R.C.C. NP3 HUME PIPE 6.0 - 7.5M DEEP (EXTRA OVER
ITEMS 3194 TO 3204). 31.55%
3209 LAYING, JOINTING R.C.C. NP3 HUME PIPE 7.5 - 9.0M DEEP (EXTRA OVER
ITEMS 3194 TO 3204). 46.15%
171
Government of Rajasthan Local Self Government
Department
INTEGRATED
SCHEDULE OF RATES
2022
(w.e.f. 01/05/2022)
172
Code Description Unit Rate
No Rs.
2973 White marble makrana second quality plain veined stone pieces for quintal 132.00
crazy flooring
2978 Cutting marble or sand stone slab upto 50 mm thick by mechanical metre 10.00
device
2981 75mm x 75mm Single paitam (rebated) stone doors windows and metre 75.00
ventilator frames of approved quarry
2982 100mm x 60mm Single paitam (rebated) stone doors windows and metre 85.00
ventilator frames of approved quarry
2983 100mm x 75mm Single paitam (rebated) stone doors windows and metre 100.00
ventilator frames of approved quarry
2984 125mm x 100mm Single paitam (rebated) stone doors windows and metre 105.00
ventilator frames of approved quarry
2985 100mm x 75mm Double paitam (rebated) stone doors windows and metre 96.00
ventilator frames of approved quarry
2986 125mm x 100mm Double paitam (rebated) stone doors windows and metre 115.00
ventilator frames of approved quarry
2991 Sand stone slab 25 mm thick machine cut and polished for shelves sqm 236.00
2992 Sand stone slab 50 mm thick machine cut and polished for shelves sqm 336.00
2993 Kota stone slab 30 mm thick machine cut and polished for shelves sqm 275.00
3001 R.C.C. pipes NP4 class 150 mm dia metre 301.00
3002 R.C.C. pipes NP4 class 200 mm dia metre 393.00
3003 R.C.C. pipes NP4 class 250 mm dia metre 569.00
3004 R.C.C. pipes NP4 class 300 mm dia metre 760.00
3005 R.C.C. pipes NP4 class 350 mm dia metre 1,250.00
3006 R.C.C. pipes NP4 class 400 mm dia metre 1,470.00
3007 R.C.C. pipes NP4 class 450 mm dia metre 1,820.00
3008 R.C.C. pipes NP4 class 500 mm dia metre 2,040.00
3009 R.C.C. pipes NP4 class 600 mm dia metre 2,560.00
3010 R.C.C. pipes NP4 class 700 mm dia metre 3,200.00
3011 R.C.C. pipes NP4 class 800 mm dia metre 4,140.00
3012 R.C.C. pipes NP4 class 900 mm dia metre 5,015.00
3013 R.C.C. pipes NP4 class 1000 mm dia metre 5,670.00
3014 R.C.C. pipes NP4 class 1100 mm dia metre 5,820.00
3015 R.C.C. pipes NP4 class 1200 mm dia metre 7,802.00
3016 R.C.C. pipes NP4 class 1400 mm dia metre 11,390.00
3017 R.C.C. pipes NP4 class 1600 mm dia metre 14,280.00
3018 R.C.C. pipes NP4 class 1800 mm dia metre 18,700.00
3019 R.C.C. pipes NP4 class 2000 mm dia metre 24,820.00
3021 R.C.C. pipes NP3 class 150 mm dia metre 285.00
3022 R.C.C. pipes NP3 class 200 mm dia metre 362.00
3023 R.C.C. pipes NP3 class 250 mm dia metre 514.00
173
Code Description Unit Rate
No Rs.
174
Rates of Well Sinking
(UPJN Sinking of well of 2.5 m (External) in ordinary soil below spring level, including supply -
2022-23
Analysis of erection and working of all plants required as well as loading and unloading of weight and
Rates -well bailing and pumping out water with machinery or otherwise as required and disposal of surplus
work , Item
no 3163) erath up to a distance of 5 meter-
0.0 to 1.5 m M 11260.07
14 Same as item 13 above but in depth 1.5 to 3.00 m M 15914.37
15 Same as item 13 above but in depth 3.0 to 6.0 m M 21854.99
16 Same as item 13 above but in depth 6.0 to9.0 m M 29588.24
17 Same as item 13 above but in depth 9.0 to 12.0 m M 35482.80
18 Same as item 13 above but in depth 12.0 to 15.0 m M 39672.86
Note:- The rates for other dia well shall be calculated on proportionaly to their area .
Rates for Sinking of well in Depth BGL (Proportional to 2.5m Dia. Rates)
External Dia. Area of per M
of Well in M Well
0.0 -1.5 1.50-3.0 3.0-6.0 6.0-9.0 9.0-12.0 12.0-15.0
175
Rates for Sinking of well in Depth BGL (Proportional to 2.5m Dia. Rates)
External Dia. Area of per M
of Well in M Well
0.0 -1.5 1.50-3.0 3.0-6.0 6.0-9.0 9.0-12.0 12.0-15.0
176
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR PURKAZI DRAIN, DISTT. - MUZAFFARNAGAR (UNDER SBM-2.0
PROGRAMME)
CALCULATION OF DIFFERENT TYPE OF BEDDING
Type (Ad) Craddle with
Base Concrete PCC 1:4:8
RCC 1:2:4 WITH 1.0 % Weight of
Node Average Crossectional Area in m2 Below PCC/RCC 1:2:4 Steel in kg.
Reinforcement If code=5
Av.Dept CRADEL
Code Length dia or If Sewer laid in Subsoil
h
using 1%
Lean PCC./RCC
bedding
in (Ad)
Grannular PCC1:4:8
type
From To Concrete (1:2:4) 0-1.5 1.5-3.0 3.0-4.5 0-1.5 1.5-3.0 3.0-4.5
BEDDING BEDDING
(1:4:8) BEDDING
5 1 2 22 250 2.54 0.09 0.153 0.153 0.153 0.00 3.37 0.00 0.00 2.05 0.00 124.47
5 2 3 22 250 2.71 0.09 0.153 0.153 0.153 0.00 3.37 0.00 0.00 2.05 0.00 124.47
5 3 4 25 250 2.60 0.09 0.153 0.153 0.153 0.00 3.83 0.00 0.00 2.33 0.00 141.45
5 4 5 15 250 2.61 0.09 0.153 0.153 0.153 0.00 2.30 0.00 0.00 1.40 0.00 84.87
5 5 6 21 250 2.77 0.09 0.153 0.153 0.153 0.00 3.22 0.00 0.00 1.95 0.00 118.82
5 6 7 30 250 2.96 0.09 0.153 0.153 0.153 0.00 4.59 0.00 0.00 2.79 0.00 169.74
5 7 8 29 250 3.42 0.09 0.153 0.153 0.153 0.00 0.00 4.44 0.00 0.00 2.70 164.08
5 8 9 45 250 3.77 0.09 0.153 0.153 0.153 0.00 0.00 6.89 0.00 0.00 4.19 254.60
5 9 10 22 450 3.55 0.12 0.408 0.408 0.273 0.00 0.00 6.00 0.00 0.00 2.64 310.86
5 10 11 38 450 3.44 0.12 0.408 0.408 0.273 0.00 0.00 10.36 0.00 0.00 4.56 536.94
5 11 MPS 10 450 3.78 0.12 0.408 0.408 0.273 0.00 0.00 2.73 0.00 0.00 1.20 141.30
5 TP-2 9 10 350 2.53 0.10 0.197 0.197 0.197 0.00 1.97 0.00 0.00 1.00 0.00
Total 0.00 22.64 30.41 0.00 13.56 15.28 2171.60
177
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR PURKAZI DRAIN, DISTT. -
MUZAFFARNAGAR (UNDER SBM-2.0 PROGRAMME)
MEASUREMENT OF DEFFERENT WORKS
Avg. Depth
Depth of sewer (inM) Width of trench (In M)
of Sewer
Outer
Thickness Width of
Length in Dia of pipe dia.of pipe
From To of pipe Trench
Metres (inMM) Bc=d+2t
Head Tail Avg. Depth in mm (in m)
Bd=Bc+0.6 0.0 to1.5 1.5 to3.0 3.0 to4.50 9.0 to 10.5
1 2 3 4 5 6 7 10 11 12 13 15 17
1 2 22 250 2.29 2.79 2.54 30.00 0.31 0.91 1.41 0.91 0.00 0.00
2 3 22 250 2.79 2.64 2.71 30.00 0.31 0.91 1.41 0.91 0.00 0.00
3 4 25 250 2.64 2.55 2.60 30.00 0.31 0.91 1.41 0.91 0.00 0.00
4 5 15 250 2.55 2.67 2.61 30.00 0.31 0.91 1.41 0.91 0.00 0.00
5 6 21 250 2.67 2.87 2.77 30.00 0.31 0.91 1.41 0.91 0.00 0.00
6 7 30 250 2.87 3.04 2.96 30.00 0.31 0.91 1.41 0.91 0.00 0.00
7 8 29 250 3.04 3.79 3.42 30.00 0.31 0.91 1.91 1.41 0.91 0.00
8 9 45 250 3.79 3.74 3.77 30.00 0.31 0.91 1.91 1.41 0.91 0.00
9 10 22 450 4.00 3.10 3.55 75.00 0.60 1.20 2.20 1.70 1.20 0.00
10 11 38 450 3.10 3.78 3.44 75.00 0.60 1.20 2.20 1.70 1.20 0.00
11 MPS 10 450 3.78 3.78 3.78 75.00 0.60 1.20 2.20 1.70 1.20 0.00
TP-2 9 10 350 2.52 2.53 2.53 75.00 0.50 1.10 1.60 1.10 0.00 0.00
Total 289.00
178
INTERCEPTION AND DIVERSION WORKS AND SEWAGE TREATMENT PLANT FOR PURKAZI DRAIN, DISTT. -
MUZAFFARNAGAR (UNDER SBM-2.0 PROGRAMME)
MEASUREMENT OF DEFFERENT WORKS
1 2 21 23 25 29 30 31 32 42 43 34 35 36 42 43
1 2 46.53 20.80 0.00 R.C.C. 0 22 0 33.00 22.86 0.00 0.00 0.00 1 -2.41
2 3 46.53 24.30 0.00 R.C.C. 0 22 0 33.00 26.71 0.00 0.00 0.00 1 -2.24
3 4 52.88 24.95 0.00 R.C.C. 0 25 0 37.50 27.41 0.00 0.00 0.00 1 -2.35
4 5 31.73 15.19 0.00 R.C.C. 0 15 0 22.50 16.70 0.00 0.00 0.00 1 -2.34
5 6 44.42 24.33 0.00 R.C.C. 0 21 0 31.50 26.73 0.00 0.00 0.00 1 -2.18
6 7 63.45 39.80 0.00 R.C.C. 0 30 0 45.00 43.74 0.00 0.00 0.00 1 -1.99
7 8 83.09 61.34 10.99 R.C.C. 0 0 29 0.00 0.00 43.50 43.50 12.08 1 -1.53
8 9 128.93 95.18 31.33 R.C.C. 0 0 45 0.00 0.00 67.50 67.50 34.43 2 -2.37
9 10 72.60 56.10 14.45 R.C.C. 0 0 22 0.00 0.00 33.00 33.00 12.05 1 -1.40
10 11 125.40 96.90 20.02 R.C.C. 0 0 38 0.00 0.00 57.00 57.00 16.68 1 -1.51
11 MPS 33.00 25.50 9.38 R.C.C. 0 0 10 0.00 0.00 15.00 15.00 7.82 1 -1.17
TP-2 9 24.00 11.29 0.00 R.C.C. 0 10 0 15.00 10.26 0.00 0.00 0.00 0 0.00
Total 752.54 495.67 86.18 0.00 145.00 144.00 217.50 174.41 216.00 216.00 83.05 12.00 -21.49
179
DRAWINGS