Professional Documents
Culture Documents
Eco .Dia - Irr. 5 Nos - Twells in Nurpur Area - Rehan
Eco .Dia - Irr. 5 Nos - Twells in Nurpur Area - Rehan
*1 Peak Daily Water Requirement for 24 hrs. 13.07 LPS 1 Peak Daily Water Requirement 13.07 LPS 13 Losses in Column pipe:-
*2 Maximum Daily Pumping Hours 16.00 HRS. 2 Maximum Daily Pumping Hours 16.00 HRS. a)Losses in Column Pipe 0.99 MTS.
*3 Length of Rising Main 325 MTS. 3 Peak Daily Design Water Requirement 19.605 LPS b)Losses in Reflux Valve,Sluice Valve,
*4 Highest Point of Discharge 110.00 MTS. 4 Length of Rising Main 325 MTS. Bend & Exit (2.3+0.2+2.2+1.0)v^2/2G 0.11 MTS.
*5 Reduced Level of Pump House 100.00 MTS. 5 Economical Dia. Of Rising Main 200.00 MM 14 Frictional Losses in Rising Main Including
6 Centre Line Level of Pump/P.W.L. 34.00 MTS. 6 Frictional Losses Per 1000 mts. 3.68 MTS. 10% for Bends & Specials 1.32 MTS.
*7 Value of "C" 100.00 7 Delivery Head 76.00 MTS. 15 Total Head 81.42 MTS.
*8 Rate of Electric Charges Per Unit in Rs. 3.10 Rs. *8 Residual Head 3.00 MTS. 16 B.H.P. OF PUMP I/C 15% OVERLOADING 40.79 H.P.
*9 Rate of Pumping Machinery in Per H.P. in Rs. 4500.00 Rs. *9 Dia of Column Pipe 150.00 MM 17 Say B.H.P. 40.00 H.P.
*10 Exact Hours Of Pumping In a Year 3375.47 HRS. *10 Length of Column Pipe 66.00 MTS. *18 Hence Provide 1 Set of 40 H.P. Each
11 Peak Daily Design Water Requirement 19.61 LPS 11 Frictional Losses Per 1000 mts. In Column pipe 14.96 MTS.
DIA OF LENGTH STATIC DISCHARGE LOSSES TOTAL NORMAL MAXIMUM VELOCITY WATER FIELD TEST PRESSURE
PIPE OF PIPE HEAD PER 1000 LOSSES VELOCITY OPERATING OF HAMMER SHALL BE GREATEST
I/C 10% PRESSURE PRESSURE EFFECT 1.5xCOL.3 1.5xCOL.8
FOR BENDS WAVE
(MM) (MTS.) (MTS.) (LPS) (MTS.) (MTS.) (M/SEC.) (MTS.) (M/SEC.) (MTS.) (MTS.) (MTS.)
1 2 3 4 5 6 7 8 9 10 11 12
AT RD = 0 RL = 1100
200 325 76.00 19.61 14.96 1.32 0.62 77.32 1225.52 77.94 114.00 115.98
AT RD = 90 RL = 1152
200 235 24.00 19.61 14.96 3.87 0.62 27.87 1199.76 76.30 36.00 41.80
AT RD = 240 RL = 1221.8
200 85 -45.80 19.61 14.96 1.40 0.62 -44.40 1166.29 74.17 -68.70 -66.60
TENSILE DIA OF OUTSIDE STRESS TEST WALL CORROSION WALL SUMMERY :- PROVIDE
STRENGTH PIPE DIA OF PIPE PRESSURE THICKNESS OR EROSION THICKNESS
* ALLOWANCES I/C 10% MILL RD
"D" "Do" "S" "P" "t" "C" TOLERANCE FROM TO
(Mpa) (MM) (MM) (Mpa) (Mpa) (MM) (MM) tm = t+c(MM)
17 18 19 20 21 22 23 24
210 200 273.10 124.00 0.30 0.39 1.65 2.07 240 325
Hmax.=C Vo/g
Where
Hmax.=maximum pressure rise in the closed conduit above the normal pressure in mts.
C =velocity of pressure wave travel in m.sec.
Vo =normal velocity in the pipeline before sudden closure in m/sec.
g =acceleration due to gravity in sq.m/sec.
C =1425/sqrt.(1+(kd/Ect))
Where
k =bulk modulous of water (2.07*10^8 kg/sq.m)
d =diameter of pipe in mts.
Ct =wall thickness in mts.
E =modulous of elasticity of material in kg/sq.m (for steel pipes E=2.1*10^10)
P =2st/Do
Where
P =test pressure in Mpa
S =stress in Mpa which shall be taken as 40% of the
specified minimum tesile strength
t =specified thickness in mm
Do =outside diameter in mm
or t =PDo/2s
OF T/WELL AT REHAN)
UMMERY :- PROVIDE
AT RD = 0 RL = 1100
200 325 76.00 19.61 14.96 1.32 0.62 77.32 1225.52
AT RD = 90 RL = 1152
200 235 24.00 19.61 14.96 3.87 0.62 27.87 1199.76
AT RD = 240 RL = 1221.8
200 85 -45.80 19.61 14.96 1.40 0.62 -44.40 1166.29
SUMMERY :- PROVIDE
0 90 6.40 Fe 330 28
RISING MAIN
Water requirement =
Carring capacity of R/ main in the year =
Economical dia of rising main. =
Total length of the rising main. =
Working Head Heavy class =
Medium class =
Rate of frictinal losses/1000 8.41
Top Rd. of rising main = 300 And RL= 1332.50
i) At RD = 0 And RL = 1200.00
Frictional lossesin the Rising main = 2.52
Add 10 % for other losses. = 0.25
Static Head. = 132.50
Residual Head. = 3.00
> 148
148
TO 0
120
Rd.
metres
es from
270 metres