Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

F07

Portik_R
Ceiling Downlights | 180-264 V AC /230-280 V DC
1 arrayLED 6.5 W DC - 7.5 W AC | CRI 80
C00467WHWML

Technical data Finishing casing


Type Surface Material Die-cast Aluminium EN AB - 46100
Installation position Ceiling Colour White
Installation environment Outdoor Processing Open pore anodizing + Powder Coating
Light Source LED
Circuit structure arrayLED Finishing diffuser
Optics Medium Flood Material Extra clear glass - Tempered
Light emission direction downward Colour transparent
Nominal power 6.5 W DC Processing Silk-screening
Total Power 7.5 W
Source lumens 965 lm
Voltage 180 - 264 V AC
Frequency 50 - 60 Hz
CCT / Tone 3000 K
Colour rendering index 80 Ra
C.C. / C.V. AC
Safety class 1
IP IP65
IK IK07
Glow wire test 850°
Direct mounting on normally flammable surfaces Yes
CE Yes
Driver included Driver
Dimmable article No
Directional No
Tilting No
Walk-over No
Drive-over No
Cable included No
Resin potting No
Type of light emission Single emission
Net weight 0.578 Kg
Electrostatic discharge protection Yes
Surge protection 1 KV

Set-back low
Optics technology
glare optics

Linea Light Group reserves the right, without any advance notice, to change the characteristics of their products, as well as the availability of the same at any time. No
1/2 10.05.2024 product, relative technical data, illustrations and information are binding for Linea Light Group. Linea Light Group will not be held liable for any illustration, text and/or linealight.com
translation\ errors. All values indicated are measured values. There is a +/- 10% tolerance for the flow, CCT and power data.
Portik_R
Ceiling Downlights | 180-264 V AC /230-280 V DC | 1 arrayLED 6.5 W DC - 7.5 W AC | CRI
80 | Base
C00467WHWML

Single emission ceiling downlights for outdoor application. The warm Energy efficiency class
white LED light source with a medium flood light distribution is composed This product contains a light source of energy efficiency class E.
of 1 arrayled LEDs with CCT of 3000 K and a CRI 80; the source
luminous flux is 965 lm, with a 148.5 lm/W nominal luminous efficacy. Illuminotechnical Features
Light Output Ratio (LOR) 73 %
The device body is made of die-cast aluminium en ab - 46100 and Source lumens 965 lm
features a white finish, processed by means of open pore anodizing + Delivered lumens 709 lm
powder coating; the diffuser is made of extra clear glass - tempered with
Consumption 7.5 W
a silk-screening treatment. The ingress protection degree is IP65; the
Luminaire efficacy 94 lm/W
total weight is of 0.578 kg.
Colour temperature 3000 K
Standard Deviation of Colour Matching 2 Step MacAdam
The total absorbed power is 7.5 W.
Colour rendering index 80 Ra

The device features protection class I and can be ceiling-mounted.


Standard Operating Ambient Temperature -20 / +50°C
Ordinary temperature on the glass 40°C
Compliant with the EN 60598-1 standard and its specific provisions.

LED Life / Failure Ratio


L70 B10 C0 252000h (at Tj 65 Ta 25 )

UGR
UGR axial 14.3
UGR transversal 14.5
X=4H | Y=8H S=0.25H
Reflection factor 70/50/20

OPTICAL
C0/C180 optics 37°
Light distribution simmetry Symmetrical

Linea Light Group reserves the right, without any advance notice, to change the characteristics of their products, as well as the availability of the same at any time. No
2/2 10.05.2024 product, relative technical data, illustrations and information are binding for Linea Light Group. Linea Light Group will not be held liable for any illustration, text and/or linealight.com
translation\ errors. All values indicated are measured values. There is a +/- 10% tolerance for the flow, CCT and power data.
Powered by TCPDF (www.tcpdf.org)

You might also like