Professional Documents
Culture Documents
Thrane&Thrane Sailor RT5022 Installation Manual
Thrane&Thrane Sailor RT5022 Installation Manual
Subject:
Priority:
Identification:
Connecting a printer to the VHF5000-series for printing of DSC messages.
H1252B
Parallel
printer
HS5001
Template After Sales Service_TN_3 00_Rev_D
Continued….
Continued….
For details on the installation of the RT5020/22 VHF DSC refer to the Operation
Manual B5022GB0 available for download at the Extranet/eSupport.
Note: Printout is supported for the languages available in the RT5020/22. The
TT-3608/H1252B printer’s character set “Latin 6” has been found to best support
the implemented languages.
Continued….
Thrane & Thrane A/S · Lundtoftegaardsvej 93 D · DK-2800 Kgs. Lyngby · Denmark
T +45 39 55 88 00 · F +45 39 55 88 88 · info@thrane.com · www.thrane.com
Bank: Danske Bank · Comp.reg.: 65 72 46 18 · VAT: DK-20 64 64 46 Page 2 of 5
Continued….
However, most printer servers supporting the LPR printing protocols will provide
printing capability from the RT5020/22 using the LB5007 LAN Box. The above
mentioned printer servers are delivered with a normal AC to DC power supply. If
AC power is not readily available or reliable on board the vessel, it may be
necessary to source power from the ship DC power (e.g. 12V or 24V). Examples
of power converters to use for the printer server are:
• An inverter solution (e.g. 12/24VDC > 230 VAC) to supply the original
server AC to >DC power supply. Search e.g. under www.shipshop.dk
• A DC-DC converter (e.g. 24VDC > 5VDC) which may be used in place of
the original server supply. e.g. PMG/PCMG 15 – www.mtm-power.dk
Setting up and configuring of the printer server varies from one manufacturer to
another. However, as a rule of thumb any printer server which is configurable in
regards to its IP-address, supports LPR printing and is capable of interfacing to
the selected printer can be configured to provide the printing facility. Printer
system configuration is to be done in the LB5007 for which three parameters
must be given:
These settings are configured and stored in the LB5007. Refer to the SB5006
Operation Manual on how to accomplish this.
Continued.....
Continued….
Continued….
The LB5007 may also be used as service box. In installations with a LB5007 the
service PC may be connected in place of the printer server during
service/configuration of the VHF equipment.
Action:
No specific action required except as stated above under “Priority”.