Professional Documents
Culture Documents
Electronic Control Module (Engine) - Remove and Install (SENR1126-36)
Electronic Control Module (Engine) - Remove and Install (SENR1126-36)
Removal Procedure
PSP
202 -000A
Note: If the ECM is being replaced, download the personality module before you remove the
ECM. Refer to Troubleshooting, "Replacing the ECM".
4. Support ECM (4). Remove bolts (1) and disconnect ground strap assembly (5). Remove ECM
(4).
Note: Rubber grommets behind ECM (4) are held in place by the mounting bolts. The
grommets help to reduce vibration. The grommets may fall when the bolts and/or ECM (4) are
removed.
Installation Procedure
https://sis2.cat.com/#/print-preview/service/dfafcaac-f6ca-4bba-bf51-2bd3f71d19b0 1/2
3/25/24, 3:45 PM SIS 2.0
Illustration 2 g01213557
1. Position ECM (4) and the grommets. Connect ground strap assembly (5) and install bolts (1).
Note: You should be able to slightly move the ECM (4) after bolts (1) are installed.
PSP-000A4FC7
2024/03/25
07:45:25+08:00
i02428381
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/dfafcaac-f6ca-4bba-bf51-2bd3f71d19b0 2/2