Professional Documents
Culture Documents
Triacsoperatingmanual
Triacsoperatingmanual
Triacsoperatingmanual
LEISTER Triac S
Hot Air Blower
Read operating instructions carefully before
use and keep it for further reference.
APPLICATION
Do not touch heater tube and nozzle when they are hot. They
may cause burns. Let the tool cool down. Do not point hot-
air flow in the direction of people or animals.
CAUTION
APPROVAL MARKS
Line/mains
Voltage V~ 42, 100, 120, 200, 230, 50/60 Hz voltage can
Power consumption W 1000, 1400, 1600, 1400, 1600 not be
switched over
Temperature °C 20 – 700, infinitely controlled
Air flow l/min. max. 230
Air pressure Pa 3000 (30 mbar) after about 24 h operating time
Weight kg 1, 3 with 3m cord
Size mm ø 100 x 330 Handle ø 56
2
Usage LEISTER Triac S
9 10 7 8 11 6 4 1 2 3 5
Change of nozzles
• Before changing nozzles cool down the tool or use only pliers/wrench.
• Do not touch hot nozzle (9) and make sure to place it on a heat resistant surface,
because of fire hazard.
• Push the nozzle (9) on the adapter tube (7) and secure the nozzle by the
.screw on the clamp (10).
Screw the nozzle (9) and secure by wrench.
• Use LEISTER nozzles only.
3
®
BA Triac S /05.2004
VERSIONS
ACCESSORIES
• Use LEISTER accessories only.
MAINTENANCE
• Clean polluted air filter (5) with a small brush or replace it.
• Clean welding nozzle with a steel brush.
• Check mains cable (1) and plug for electrical and mechanical damage.