Professional Documents
Culture Documents
Piping Support Manual Load Calculation
Piping Support Manual Load Calculation
Operating Wt Operating
Max No. of Total Empty Total Test. Total Operating Load
Pipe Pipe Empty Pipe Wt + Insulation Wind Insul./ Pipe Wt + (Kg/m) = Wind Load load + Wind
Pipe Support Pipe Support tag Support Pipe Support Height Water Wt Pipe Load Load KN
Line Designation Phase Size length Pipe Wt Water Wt thickness Pressure Lining Wt. Ins. Wt Empty (Lateral) Load REMARKS
Node Number number Type Sch. for Limit (m) (Kg/m) (Vertical). (Vertical)
mm M (Kg/m) (Kg/m) mm in Kpa (Kg/m) (Kg/m) Pipe+Insulati KN (Lateral)
stop KN KN
on+Water KN
AXIAL VERTCIAL LATERAL
NOTES :
1) Insulation density = 130kg/m3.
3) Total test weight has been taken as the summation of total empty pipe weight & the water weight of the pipe in the section
5) Axial load are calculated based on sum of number of supports vertical load on longest section of upstream or downstream section from axial stop, multiplied with friction co-efficient 0.3
6) Wind loads are calculated for 10" & above piping based on BS 6399-2 considering wind drag/force co-efficient = 1.2, Wind Pressure is taken from Project Design Basis para 7.2.3-e