Professional Documents
Culture Documents
Pentair Sand Filter
Pentair Sand Filter
Product Features
Why customers specify Structural™
pressure vessels ? - Full choice of vessels available upto 63” diameter
with 86” height
- High-quality products
- Diameter with capacities from 33 to 2500 liters
- On-time delivery - Outstanding performance and durability in harsh
chemical environment
- The best warranties in the business
- Unmatched strength with rust free guarantee
- Unparalleled customer support
- Structural™ pressure vessels comes with an
- Raw material used are from best Multinational unmatched 3 years warranty
suppliers
- Compliance with PED/97/23/EC to mark CE
Application Areas marking
Structural™ pressure vessels serves all residential, Full choice of vessels available upto 63” diameter
with 86” height
pressure vessels are mainly for filtration, softening
water commercial and industrial applications and
these treatment and storage.
Installations
Stainless Steel
Cost Maintenance over 3 years
Water Quality
Light proof to prevent algae growth. Residual chlorides causes chlorine gas when water pours into
StructuralTM Pressure Vessels are completely sealed, manhole pressure vessels through inlet, this degrades both metal and water
covers and air vents are by design dust and insect proof. quality. Bottom slope will not allow complete drainage of hose
No metal components need to be in contact with water. pressure water with chemicals used for cleaning resulting in
Reinforcement bolts and nuts for assembly are on the outside. contamination of incoming water.
Leakage
Long Life UV protection prevents the pressure vessels from Weak points at welded joints lead to Leakage problems with
leakage. Seamless design except Manholes & side ports. welded pressure vessels.
Bolted steel pressure vessels are susceptible to high expansion
and contraction due to thermal properties, which will over time
affect sealant causing leakage.
If corrosion is not corrected regularly it will eventually cause
leakage. Freezing will result is leaks at the joints.
Corrosion Properties
Not applicable No steel in direct contact with water. Highly susceptible to corrosion causing frequent and costly
maintenance.
Materials used to rectify corrosion may be toxic.
Any process to protect the steel from corrosion is easily scratched
as a result of accidents during handling and assembly which in
turn cause corrosion. Durability Water Quality Leakage Repairs &
Maintenance Adaptability of Size and Design Corrosion Properties
Material of Construction Pentair design parameters
- Inner shell of polyethylene - Safety Factor: 4:1
- Threaded & Flanged inlets in various sizes - Minimum burst at 600 psi
- Tested upto 250
Operating Parameters
- Maximum operating pressure: 150 psi NSF design parameters
- Maximum operating temperature: 49ºC - Safety Factor: 4:1
- Minimum burst at 600 psi
- Tested upto 100
* Pentair strongly recommends use of vacuum breaker while installing Structural™ Pressure Vessels
** Please refer individual general arrangement drawing for dimensions, volumes etc.
Note : Pentair maintains a policy of continuous improvement / development and reserves the right to amend the information
given herein without any prior notice
CORPORATE OFFICE REGISTERED OFFICE & REGIONAL OFFICE – REGIONAL OFFICE – REGIONAL OFFICE -
Green Boulevard MANUFACTURING FACILITY MUMBAI CHENNAI AHMEDABAD
B-9/A, 7th Floor, Tower B L/52-55, Verma Industrial Area 804, Windsor, Off CST Road, Eurocon Tiles, 3rd Floor, 503, Sukh Sagar Complex,
Sector 62, Noida-201301 Verma, Goa - 403 722 Near Bandra-Kurla Complex, No.161 Greams Road, Land Ashram Road, Usmanpura,
Phone: + 91 120 419 9444 Phone: +91 832 288 3300 Kalina, Santacruz (E), Mark Near Apollo Hospital. Near Fortune Landmark,
Fax: +91 120 419 9400 Fax: +91 832 288 3312 Mumbai - 400 098 Chennai - 600 006 Ahmedabad - 380 013
Tel. No.: +91 22 61310600 Phone: +91 44 42122046 Phone: +91 79 30620174