Professional Documents
Culture Documents
C7.CN Tái Chế Blends
C7.CN Tái Chế Blends
1
Nội dung
1. Tình hình chung
2
1. Tình hình chung
• Nylon có đặc tính giữ ẩm tốt hơn PET (Why???)
• Sợi PET/ nylon 6 tái chế đã được phát triển để tăng phạm vi sử
dụng sợi PET tái chế.
• Điều quan trọng là phải nghiên cứu đặc tính của vải dệt kim
PET/nylon tái chế để thay thế vải dệt kim PET nguyên chất và
mở rộng các ứng dụng cho trang phục thể thao và trang phục
ngoài trời.
• Sợi PET tái chế về mặt cơ học và hóa học được sản xuất bằng
phương pháp kéo sợi nóng chảy. Vận tốc kéo sợi nóng chảy là
3000 m/phút.
• Sợi hỗn hợp PET–nylon6 tái chế bao gồm PET 80% tái chế/
nylon6 20% được sản xuất với vận tốc kéo sợi là 3960 m/phút.
3
Bảng so sánh thông số của PET nguyên sinh và PET tái
Choi and Kim
chế , PET tái chế/nylon 6 3
Table 2. Dimensional properties of virgin and recycled polyethylene terephthalate knitted fabrics
4
Pw Pc Stitch density
#1 #1 #2
PET–nylon6
blend 80/20 75/24SDY
CN tái chế
DTY: drawn textured yarn; SDY: spin draw yarn.
Table 2. Dimensional properties of virgin and recycled polyethylene terephthalate knitted fabrics
Pw Pc Stitch density
Sample code Sample (cm#1) (cm#1) (cm#2)
5
4 Textile Research Journal 0(00)
So sánh giá trị độ bền kéo, modun, độ biến dạng
(a) (b)
(c)
Figure 1. Tensile properties of virgin and recycled polyethylene terephthalate (PET) knitted fabrics: (a) strength; (b) strain;
(c) modulus. 6
Ảnh SEM
Table 4. Field emission scanning electron microphotographs of virgin and recycled polyethylene terephthalate (PET) knitted fabrics
!50
SV hãy
xem
và
phân
tích
!1000 ảnh
SEM.
!3000
7
Morphology the surface of
Đặc tính vận chuyển
The độ ẩm là một
morphologies oftrong nhữngsamples
the four yếu tố quan
are trọng nhấtin
detailed ảnh of chemical rec
hưởng đếnTable
cả sự thoải mái và khảPET–nylon6
4. Recycled năng giặt của hàng dệtfabric
blend may, đặc biệt là đồfabric
knitted lót touch.
và đồ thể thao.
Moisture tran
Vải dệt kim
The moisture
PET/nylon6
important fact
tái chế đã
wash-wear
được cải of t
and khả
thiện sportswea
ity, and
năng wickin
hút ẩm.
moisture trans
Moisture re
Figure 4. Mois
philicity. Wher
Figure 4. Moisture regains of virgin and recycled polyethylene has some h
terephthalate (PET) knitted fabrics. Therefore,
8
mo
that of PET. R
moisture regain, lower thickness, and a smoother sur-
Figure 5.
Đặc tính thấm hút của PET
Moisture permeabilities of virgin and recycled poly-
tái chế và PET/nylon 6 tái chế
face than other samples, the moisture permeability
of recycled PET–nylon6 blend knitted fabric was
ethylene terephthalate (PET) knitted fabrics. improved.
Table 5. Wicking properties of virgin and recycled polyethylene terephthalate (PET) knitted fabrics
9
water is transferred in fabrics by wicking and evaporating, as well as identifying the factors affecting
this wicking–evaporating process, is essential.
Figure 1. Water wicking and evaporating occur simultaneously in a typical vertical wicking test.
Water transfer behavior is highly related to the geometry of fabrics [24], which depends on the
density, weaves, thickness, and porosity [11,14,15,25]. The porosity of fabrics, determined by the 10
structural weave [26,27], could induce changes in the structure, shape, and the number of capillary
BÀI TẬP
48 SV hãy cho biết các cải thiện cần phải
G. Hole and A.S. Hole / Sustainable Production and Consumption 23 (2020) 42–51
Fig. 3. overview over challenges within textile recycling and corresponding possible solutions for introduction of policies
11