Professional Documents
Culture Documents
Quality Manual
Quality Manual
January 2019
Table of Contents
March 2017
How to Use This Manual
The How to Measure Manual contains the POM (Point of Measure) code along with a
sketch and the wording of how to measure each point.
The handbook is in numeric order by the POM codes. Using the POM number from the
Measurement Chart in PLM, go to the Point of Measure in this manual to find the sketch
and the how to measure wording for that point.
To view a specific styles how to measure chart in PLM go to the “How To Measure’ tab on
the top of the Measurement Chart for the complete listing of all of the POM’s included.
Tech Design is accountable for ensuring that all critical POM’s have a matching how
to measure sketch.
Vendors will be held accountable for creating garments that measure to spec and
within the set tolerances as outlined in the Measurement chart located in the tech pack.
Position measurements will have one Point of Measure to list the position and a
second Point of Measure to list the measurement itself
Waist Position from HPS 16”
Waist 30”
All garments should be laid flat on the table in a relaxed position with the loft/fill
allowed to decompress. With the edge flat, place the measuring tape across the
garment at the specified points taking care not to flatten the loft or fill. The measuring
tape should be pulled straight across without causing indentions in the garment.
March 2017
When measuring along the curve, the tape should be on its edge unless otherwise
specified.
For flat felled seams, measure to the center point between the fell stitch lines, unless
otherwise indicated.
For true flatlock seams, measure to the center point between the flatlock stitch lines.
When measuring heavy fabrics, lay the seams with the bulk away from edges.
Welt pocket height is always measured from welt pocket opening to the seam (for
double welts measure from seam to seam) no matter what the orientation of the
pocket.
March 2017
To create an imaginary line, align a ruler or tape measure from point to point.
HPS (High Point of Shoulder) is the highest point of the shoulder at the natural fold.
March 2017
Wovens Guidelines
Woven circumferences are double measurements, unless the Tech Pack specifies
differently. Starting Spring 18 woven garment widths will be measured on the half to
align with knits and sweaters.
Placement of all sewn on details are measured from seams, whenever possible.
On woven garments the shoulder width is taken at the back of the garment.
Hips on pants and skirts are 3-pt measurement; hips on tops, dresses and 1-pieces
are 2-pt measurements.
If garment is bias cut, smooth along both grain lines of fabric to achieve 90 degrees at
grain intersection.
Knits Guidelines
Knit circumferences are half measurements.
If the POM for the neck width is listed as SEAM to SEAM, then all other POM’s given
from the HPS are to be measured from the SEAM
If the POM for the neck width is listed as EDGE to EDGE, then all other POM’s given
from the HPS are to be measured from the EDGE
Knit measurements are generally straight 2 point measurements rather than along the
curve.
March 2017
When measuring the armhole, the side seam should be flattened out to recover the
armhole shape.
All CPSC required measurements are designated with a CPSC in capital letters in
front of the POM description.
March 2017
PLM POM Change/Add Log January 2019
PLM
Date Code PLM Sort PLM Description PLM HTM Text
11/13/2018 1222542 18004.1 Sock Welt Height Measure from top of sock to bottom edge of welt.
11/13/2018 1225604 18005.1 Ankle opening along top edge. Measure along top opening from edge to edge.
07/17/2018 1194719 8005.1 Waist at Bottom of Band ‐ Straight Line up front and back waist edges. With tape measure laying
flat on top of waistband, measure straight along the bottom of
the band edge to edge.
06/18/2018 1187669 19099.10 Ruffle Placement from ____. Measure form the specified point to the top edge of the ruffle.
03/02/2018 1158940 18005.2 Heel Depth Measure from internal end of pick line to the heel.
1158941 18005.3 Toe Pick Depth Measure the length of the toe pick.
1158949 18005.4 Arch Support Placement Measure from toe to beginning of arch support.
1158953 18005.5 Arch Support Length Measure from edge to edge of arch support.
1158957 18005.9 Foot Width ____ From Toe Edge Measure from edge to edge at specified distance from toe
point.
02/02/2018 1150976 6009.1 Pad Pocket Opening Length Measure from inside edge to inside edge.
02/02/2018 1150999 6009.2 Pad Pocket Opening Depth Measure from seam to inside edge of opening at deepest
point.
03/22/2017 1071, 1072, 1073, Removed the word “circumference” from the POM name.
1074, 1075
03/22/2017 Woven Guidelines Starting Spring 18 woven garment widths will be measured on the half to align with knits and sweaters.
03/13/2017 1025656 11004.10 Leg Opening Point to Point ‐ Bodysuit Measure from side seam edge to center of the snap at the
crotch with the crotch snapped closed.
02/14/2017 1017563 18010.01 Strap Length to Seam Measure from the seam to the edge of the strap.
1017579 18013.01 Internal Back Height On the inside, measure from the base of the insole to the top
edge.
1017580 18013.02 Insole Length Measure the length of the insole from the center back to the
center front, edge to edge.
1017443 18013.04 Flip Flop Thickness Measure from the bottom of the sole to the top.
1017455 18012.01 Apex Height Measure the side at the highest point to the sole.
1017483 18012.01 Quarter Height Measure the height of the shoe mid‐distance between the
vamp and the back edge.
PLM POM Change/Add Log January 2019
1017498 18013.03 Boot Shaft Circumference Measure up 300mm/11 3/4" from the top of the heel,
measure across from edge to edge, times 2.
1017517 18013.02 Boot Shaft Height Measure from top of heel to top edge of boot.
12/12/2016 1003505 11014.10 Minimum Opening With Garment fully extended and opened, measure from edge
to edge. Measurement should not be smaller than the
measurement on the measurement chart.
09/27/2016 976118 19073.5 Patch Placement Vertical from ____. Measure from the seam/edge at the specified position to the
top of the patch at the center.
08/03/2016 954273 15005.5 Sideseam Placement Measure from the folded edge of the garment to the seam.
06/27/2016 942301 15012.1 Body Length from High Point Shoulder ‐ at Side Fold the garment in half matching the side seam to the side
seam.
Extend the body to lay as smooth as possible.
Measure from the high point shoulder to the bottom edge.
06/27/2016 942291 11008.1 Back Bottom Opening ‐ at Side Fold the garment in half matching side seam on side seam.
Measure from the folded edge at the CB to SS ‐ double the
measurement for back bottom opening, seam to seam.
06/27/2016 942287 8008.1 Waist ‐ CF to CB Fold garment in half matching the side seam to the side seam.
Measure down from the armhole edge/seam, with the side
shirring relaxed, to the specified position. Measure from the
CF to the CB folded edge to edge.
06/27/2016 942293 11008.2 Front Bottom Opening ‐ at Side Fold garment in half matching side seam on side seam.
Measure from the folded edge at CF to SS ‐ double the
measurement for front bottom opening, seam to seam.
04/22/2016 914768 15010.0 Dress/Top Side Seam Length Measure from the armhole to the bottom edge.
02/16/2016 892944 19028.01 Dart Tip Vertical from High Point Shoulder Measure vertical from HPS to top of dart.
12/01/2015 438830 12012.1 Armhole Along Curve Align front and back armhole. With measuring tape on it’s
side, measure along the front armhole shoulder edge to side
seam. Double the measurement.
06/22/2015 821,964 15000.1 Body Length from High Point Shoulder‐ Shirttail Measure from the high point of the shoulder to longest point
of the bottom opening at the imaginary line.
05/22/2015 1094 3039. Minimum Neck Stretch EFFECTIVE HOLIDAY 2015. Measuring tapes and rulers will be
acceptable through Fall 2015.
Insert gauge into the garment from the bottom opening and
pull towards the neck opening.
Pass = Gauge goes through the neck opening smoothly
without shape distortion or seam breakage.
Fail = Gauge goes through the neck opening with shape
distortion or seam breakage; or the gauge is unable to go
through the neck opening.
05/12/2015 805,196 3002.1 T‐Neck/Mock T‐Neck Rib Height at Center Front Measure from turtleneck/mock turtleneck rib edge at center
front to neck seam.
03/30/2015 791,193 2014.01 Bottom Opening Edge to Edge Measure straight at front bottom opening from outside edge
to outside edge with opening relaxed.
06/18/2014 674,454 17009.1 Inseam Without Gusset Measure from gusset join seam at edge/seam to bottom
opening edge or foot seam, following the shape of the inseam.
PLM POM Change/Add Log January 2019
05/22/2014 661,509 19055.1 Keyhole/Slit Length Measure opening from top edge to bottom edge at the center.
11/8/2013 584,374 19059.1 Hanger Loop Length Measure length from edge to edge at inside neck.
6/27/2013 General Guidelines ‐ Updated Knit Guidelines for Please refer to the Knit Guidelines.
HTM the HPS
5/1/2013 496,300 8010.6 Front waist at panel seam – extended With measuring tape flat, measure along curve of front waist
seam with elastic/knit panel extended, from SS to CF to
opposite SS.
5/1/2013 496,301 8010.7 Back waist at panel seam – extended With measuring tape flat, measure along curve of back waist
seam with elastic/knit panel extended, from SS to CF to
opposite SS.
12/3/2012 430,550 12014.0 Armhole Curve ‐ Total With the measuring tape flat, walk the circumference of the
armhole on the body side starting and ending at the side
seam.
9/12/2012 General Guidelines ‐ Defined responsibility for HTM
sketches
4/9/2012 306191 ‐ 21011.0 ‐ Costumes Please refer to the POM for the description and text.
306468 21011.3
4/9/2012 282627 1122.2 Chest 1” below armhole, CF to CB With garment folded in half with side seams aligned, measure 1"
below bottom of armhole from CF to CB. See "general guidelines"
for garments with bust darts, shaping, or that are cut on the bias.
Added 04/2010 83479 5015.5 Chest with Bust Darts At 1" below bottom of armhole, fold the garment across with the
lower portion of the garment under the top portion. With the
measuring tape on its side, measure from edge to edge
encompassing the fullness from the bust darts.
Added 02/2010 70470 1194.1 Contour Waist at Top Edge Line up front and back waist edges so they are even. With tape
measure laying flat on top of garment, measure along the curve at
the top edge of the band, from edge to edge.
Added 02/2010 70473 1195.1 Contour Waist at Bottom of Band Line up front and back waist edges so they are even. With tape
measure laying flat on top of waistband, measure along the
bottom of the band, from edge to edge.
Added 12/2009 59560 14012.1 Finger Width Measure the width of the finger from edge to edge at the center
of the finger.
Added 10/2009 42073 5010.1 High Back Position from Center Back To determine high back position, measure from the center back
seam/edge to the distance specified.
Added 09/2009 33749 19122.1 Trapezoid Width at Top Measure from edge/seam to edge/seam at top of trapezoid.
Added 09/2009 33756 19122.2 Trapezoid Width at Bottom Measure from edge/seam to edge/seam at bottom of trapezoid.
Added 09/2009 33759 19122.3 Trapezoid eight at Center Measure from edge/seam to edge/seam at the center of the
trapezoid.
Added 08/2009 6892 13013.1 Sleeve Cuff Height Measure from Cuff Top Edge to Sleeve Opening Fold Edge
Added 04/2009 14606 5013.5 Chest At the position specified, measure from edge to edge. If garment
has pleats, measure with pleats open (or as specified on GSS). See
"general guidelines" for garments with bust darts, shaping, or that
Added 04/2009 14611 5013.6 Chest Position from ________________
Added 04/2009 9360 19039.9 Distance between _________________ Measure the distance specified on the GSS from the edge of the
specified object to the other edge.
Added 03/2009 9074 19039.2 Garment Weight (Pounds per dozen)
How To Measure Manual
1000; CPSC - Chest Armpit to Armpit 1001; CPSC - Waist at Midpoint - Guideline
The waist at midpoint must be the narrowest location between the armpit and the
crotch. If for any reason, the narrowest location falls above or below the midpoint
At bottom of armpit (armhole/sideseam intersection), measure from edge to edge. position, the point of measure will be considered a CPSC critical failure.
1002; CPSC - Waist at Midpoint - 1 Piece 1003; CPSC - Bottom Sweep Straight (CPSC Waist)
To find midpoint, place ruler across chest, armpit to armpit. Fold garment up so that
the crotch point meets armpit level. Mark position at sideseam. Unfold garment and
measure straight across from edge to edge. Continued in C001. Measure straight at bottom of garment edge to edge.
1004; CPSC - Waist Relaxed - 2 Piece Bottom 1005; CPSC - Hip 4" From Crotch (CPSC Seat)
Fold garment in half with backs together to find the bottom of the crotch (regardless
Line up front and back edges and measure straight at top of waist relaxed from edge of gusset seams). Mark 4" up from bottom of crotch. Unfold garment and measure
to edge. straight across from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 1 of 133
How To Measure Manual
1006; CPSC - Thigh 1" Below Crotch 1007; CPSC - Bottom Opening - Short
Fold garment in half with backs together to find the bottom of the crotch (regardless
of gusset seams). Mark 1" down from bottom of crotch. Unfold garment and measure Line up front and back edges of leg cuff and measure straight from edge to edge
straight across from edge to edge. If 1" down from bottom of crotch is below the bot with snaps closed, if applicable.
1008; CPSC - Bottom Opening - Ankle 1009; CPSC - Upper Arm Position - 1 Piece
At waist point at sideseam, extend a straight line through armpit to sleeve folded
Line up front and back bottom edges of leg cuff and measure straight from edge to edge. (A to B to C). Measure along folded edge from "C" to "D", the distance
edge with snaps closed, if applicable. specified on the GSS.
1010; CPSC - Upper Arm Position - 2 Piece 1011; CPSC - Upper Arm
At bottom sweep edge at sideseam, extend a straight line through armpit to sleeve At upper arm position (D), measure perpendicular from sleeve folded edge to
folded edge. (A to B to C). Measure along folded edge from "C" to "D", the distance sleeve underarm edge (D to E). If point "D" falls below end of sleeve, use (**SLEEVE
specified on the GSS. OPENING - SHORT) measurement instead.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 2 of 133
How To Measure Manual
1012; CPSC - Sleeve Opening - Short 1013; CPSC - Sleeve Opening - Long (CPSC Wrist)
Line up front and back bottom edges of sleeve/cuff and measure straight from edge Line up front and back bottom edges of sleeve/cuff and measure straight from edge
to edge. to edge.
Measure across top from seam to seam/edge to edge. Measure across from front to back from seam to seam/edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 3 of 133
How To Measure Manual
Measure height from top crown to brim/band seam as specified on the Measurement
Measure across width from seam to seam/edge to edge. Chart
1020; Crown Height from Center Front to Center Back 1021; Crown Height Side To Side
Measure over crown from center front to center back. Measure over crown from side to side.
1022; Total Length from Crown to Bottom Edge 1023; Center Front to Center Back Length
Measure from center of crown to bottom edge of hat. Measure along top from center front edge to center back edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 4 of 133
How To Measure Manual
Measure from outside folded edge/seam to inside edge. Measure headband width from edge to edge.
1028; Width __" Down from Top of Cap 1029; Hat Length-Rolled
Measure edge to edge at specified distance down from top of cap. Measure from top of hat to bottom rolled edge through the center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 5 of 133
How To Measure Manual
Measure from top of hat to bottom edge through the center with hat unrolled. Measure at crown from edge to edge.
Measure straight from edge of visor at bottom of panel to imaginary line of the
Measure from edge to edge at center front. longest point of visor.
With both sides of the visor on a flat surface, measure from the surface to the top of
the visor at the center front. Measure from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 6 of 133
How To Measure Manual
1038; Earflap Height at Center Back 1039; Ear Flap Width at Top
Measure from seam to edge at center back. Measure from edge to edge.
1040; Earflap Length Along Circumference 1041; Distance Between Earflaps at Back
Measure from edge to edge along circumference seam. Measure along circumference from inside edge to inside edge at back.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 7 of 133
How To Measure Manual
1042; Ear Flap Placement from ____ 1043; Shade Flap Height at Side
No Image Available.
Measured from point specified in the GSS to the edge of the earflap. Measure from seam to bottom edge at side.
Measure from seam to bottom edge at center of flap. Count number of darts.
1046; Headband Length Including Casing 1047; Hood Width __ Down from Top
At specified distance down from top of hood, measure straight across from front
Measure from folded edge to folded edge. edge to back edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 8 of 133
How To Measure Manual
1048; Hood Length from Center Front to Center Back 1049; Hood Opening-2 Point
Measure straight from center front neck or hood seam to top of hood with opening
Measure the curve of hood from center front edge to center back neck seam. relaxed or extended.
1050; Hood Opening Along Curve Edge to Edge 1051; Hood Height at Side
Measure along curve from center front neck edge/seam to top of hood. Measure from neck seam at high point of shoulder to top of hood.
1052; Hood along Neckline Edge 1053; Hood Extn Height at Center Front Edge
Measure hood along neck seam or bottom edge of detachable hood from front edge
to front edge. Measure along front edge from neck seam to hood opening edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 9 of 133
How To Measure Manual
1054; Hood Dart Placement from Hood Front Edge 1055; T-Neck/Mock T-Neck Width at Top Edge
Line up front and back neck at top edge and measure straight across top of neck
Measure from front edge to dart. trim without stretching.
1056; T-Neck Width __ from Top Edge 1057; T-Neck/Mock T-Neck Rib Height at Center Back
Line up front and back top edges of neck and at distance specified from top edge,
measure from edge to edge. Measure from turtleneck/mock turtleneck rib edge at center back to neck seam.
1058; Collar Length at Outer Edge 1059; Collar Length at Neck Seam / Collar Stand
Spread collar open and measure collar from edge to edge along neck seam / collar
Spread collar open and measure along top edge from collar point to collar point. stand.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 10 of 133
How To Measure Manual
Measure from collar edge at center back to neck seam or top of collar stand. Measure from collar edge at shoulder to neck seam or top of collar stand.
1062; Collar Point 1063; Rounded Collar Point __" from edge
Measure from collar point to collar stand seam. Where there is no collar stand, At specified distance from edge on collar stand seam or neck seam, measure to
measure to neck seam. outside edge of collar at widest point.
Measure distance between collar edge to collar edge at center front neck with Measure distance between two collar points with neck buttoned. If button down
garment buttoned or zipped. collar, measure with buttons buttoned.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 11 of 133
How To Measure Manual
1066; Collar Stand Height at Center Back 1067; Collar Stand Height ___" from Front Edge
Measure from top of collar stand to bottom of collar stand at specified distance from
Measure from top of collar stand to bottom of collar stand at center back. front edge.
1068; Lapel Width from Roll Line 1069; Collar Point - Notched
Measure the widest point from the natural roll edge to lapel point edge. This
measurement is perpendicular to natural roll edge of lapel. Measure from collar point to lapel seam/corner.
Line up collar band or neck seam front to back. Measure through center with
Measure from lapel point to corner of notch/collar seam. garment closed from edge to edge of collar or collar stand.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 12 of 133
How To Measure Manual
1072; Neck Width Along Seam-Edge to Edge 1073; Collar Length Along Seam-Collar Edge to Collar Edge
Measure from edge to edge along neck seam. Measure from edge of collar to edge of collar along neck seam.
With garment folded in half, measure along neck curve (with measuring tape on it's
Measure from center of button to outside edge of buttonhole along collar/neck seam. side) from center front to end of strap.
1076; Neck Along Edge 1077; Neck Along Edge - Strap to Strap
Measure along edge of neck from shoulder seam to shoulder seam (with measuring Measure top edge along curve (with measuring tape on it's side) from strap join to
tape on it's side) along curve. strap join.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 13 of 133
How To Measure Manual
1078; Vee Neck Along Edge - Each side 1079; Neck Opening
Fold garment in half and line up neck edges. Measure with elastic straightened and
Measure along edge of front neck from shoulder seam to "V" at center of front neck relaxed from edge to edge.
1080; Front Neck Width at __ Above 1081; Neck Width Seam to Seam
Neck Drop-Edge to Edge/Seam to Seam
Measure straight across neck at high point of shoulder, seam to seam. Neckline/
shoulder should be smoothed out to recover neck shape before measuring.
Measure straight across neck from specified distance above neck drop.
1082; Neck Width Edge to Edge 1083; Front Neck Drop: Imaginary Line to Seam
Create an imaginary line across neck from high point shoulder to high point
Measure straight across neck at high point of shoulder, edge to edge. Neckline/ shoulder. Measure from the center of that line to the center front neck seam.
shoulder should be smoothed out to recover neck shape before measuring. Neckline/shoulder should be smoothed out to recover neck shape before measuring.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 14 of 133
How To Measure Manual
1084; Front Neck Drop: Imaginary Line to Top Edge 1085; Front Neck Drop: Imaginary Line to__
No Image Available.
Create an imaginary line across neck from high point of shoulder to high point Create an imaginary line across neck from high point of shoulder to high point
shoulder. Measure from the center of that line to the center front neck edge. shoulder. Measure from the center of that line to the specified point. Neckline/
Neckline/shoulder should be smoothed out to recover neck shape before measuring. shoulder should be smoothed out to recover neck shape before measuring.
1086; Front Neck Drop: Imaginary Line to Center of 1st Button 1087; Back Neck Drop: Imaginary Line to Seam
Create an imaginary line across neck from high point of shoulder to high point Create an imaginary line from high point shoulder to high point shoulder. Measure
of shoulder. Measure from the center of that line to the center of the first button. from the center of that line to the center back neck seam. Neckline/shoulder should
Neckline/shoulder should be smoothed out to recover neck shape before measuring. be smoothed out to recover neck shape before measuring.
1088; Back Neck Drop: Imaginary Line to Top Edge 1089; Back Neck Drop: Imaginary Line to Center of 1st Button
Create an imaginary line across neck from high point shoulder to high point
shoulder. Measure from the center of that line to the center back neck edge. Create an imaginary line acrossthe neck from high point shoulder to high point
Neckline/shoulder should be smoothed out to recover neck shape before measuring. shoulder. Measure from the center of that line to the center of first button.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 15 of 133
How To Measure Manual
Create an imaginary line from high point of bodice to high point of bodice. Measure Create an imaginary line from sideseam to sideseam. Measure from the center of
from the center of that line to the center front neck edge/seam. that line to the center back neck edge/seam.
1092; Distance Between Front Straps 1093; Distance Between Back Straps
Measure straight across at top back from inside edge of strap to inside edge of
Measure straight across at strap/body join from inside edge to inside edge. strap.
1094; Minimum Neck Stretch 1095; Shoulder Width Seam to Seam at Front
Insert gauge into the garment from the bottom opening and pull towards the neck
opening. Pass = Gauge goes through the neck opening smoothly without shape Measure straight across front of garment from natural fold of shoulder at armhole,
distortion or seam breakage. Fail = Gauge goes through the neck opening with seam to seam.
shape distortion or seam breakage; or the gauge is unable to go through the neck
opening.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 16 of 133
How To Measure Manual
1096; Shoulder Width Edge to Edge at Front 1097; Shoulder Width-Seam to Seam at Back
Measure straight across front of garment from natural fold of shoulder at armhole, Measure straight across back of garment from natural fold of shoulder at armhole
edge to edge. seam to seam.
Measure straight across back of garment from natural fold of shoulder at armhole
edge to edge. Measure along shoulder seam from neck edge to armhole edge/seam.
1100; Shoulder Slope 1101; Raglan Shoulder Slope from Imaginary Line to Top of Sleeve
Create an imaginary line through High Point Shoulders. Measure creating a right
Create an imaginary line at high point shoulder. Measure from imaginary line to angle from the imaginary line to top of sleeve. Positioning should line up with side
shoulder at armhole. seam underarm intersection.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 17 of 133
How To Measure Manual
1102; Shoulder Slope __ from Center Back 1103; Shoulder Seam Forward
Create an imaginary line at high point of shoulder. Measure from imaginary line to
shoulder at specified distance from center back. Measure from natural fold of shoulder to shoulder seam.
1104; Shoulder Seam Towards Back 1105; Shoulder Seam Towards Back at High Point Shoulder
Measure from natural fold of shoulder along armhole seam to shoulder seam. Measure from natural fold of shoulder along neck seam to shoulder seam.
1106; Front Bodice Width at Top 1107; Back Bodice Width at Top
Measure along top edge of front bodice from edge to edge. Measure along top from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 18 of 133
How To Measure Manual
1108; High Chest Edge to Edge at Front Neck Drop Imaginary Line 1109; Across Back Width at __" Down from High Point Shoulder
At specified distance down from HPS, measure straight across back from edge to
Measure straight across chest at front neck drop. edge.
1110; Back Body Width at Top 1111; High Chest at 1/2 of Armhole
With elastic straightened and relaxed, measure straight at top edge from sideseam At 1/2 of armhole measure straight across chest from armhole seam to armhole
to sideseam. seam. For sleeveless garments, measure edge to edge.
1112; High Chest Position from High Point Shoulder 1113; High Chest Position from Shoulder/Neck Seam
To determine the high chest position, measure down from high point of shoulder to To determine the high chest position, measure down from shoulder/neck seam to
the distance specified in the GSS. specified distance.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 19 of 133
How To Measure Manual
1114; High Chest 1115; Front High Chest Width Each Side
At specified high chest position measure straight from armhole seam to armhole At specified high chest position, measure straight from seam to edge. If garment has
seam. For sleeveless garments measure edge to edge. pleats, measure with pleats open. For sleeveless garments measure edge to edge.
1116; High Back Position from High Point Shoulder 1117; High Back
To determine high back position, measure from high point of shoulder to the At specified high back position, measure across back from armhole seam to
distance specified in the GSS. armhole seam. For sleeveless garments measure edge to edge.
At 1/2 of armhole, measure straight across back from armhole seam to armhole At specified high chest position, measure from lapel edge to armhole seam, straight
seam. For sleeveless garments measure edge to edge. across.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 20 of 133
How To Measure Manual
At 1" below bottom of armhole, measure from edge to edge. See "general At bottom of armhole, measure from edge to edge. See "general guidelines" for
guidelines" for garments with bust darts, shaping, or that are cut on the bias. garments with bust darts, shaping, or that are cut on the bias.
1122; Chest 1" below Armhole Seam to Edge 1123; Front Chest 1" below Armhole
At 1" below bottom of armhole, move excess fabric below darts or seams, measure At 1" below bottom of armhole, move excess fabric below darts or seams, measure
from edge to seam. from seam to seam.
1124; Back Chest 1" Below Armhole Seam to Seam 1125; Front Panel Width Shoulder Seam to Shoulder Seam
At 1" below bottom of armhole on back of garment, measure from seam to seam. Measure Straight from Seam to Seam
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 21 of 133
How To Measure Manual
Measure Straight from Seam to Seam Measure straight from bottom edge to top of cup at strap join.
1128; Front Underarm-Strap Join to Bottom Edge 1129; Cup Length at Bottom Edge-Softcup
Measure straight from front strap join to bottom edge. Measure along bottom edge from center front seam/edge to sideseam.
No Image Available.
Used by manufacturer to order sizes. Refer to underwire length for measurement. Measure wire length along outer edge, tip to tip, with measuring tape on it's side.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 22 of 133
How To Measure Manual
For factory use in molding garments to size. For factory use in molding garments to size.
No Image Available.
With any gathers removed from casing, measure along bottom edge of cup (with
For factory use in knitting tubular garments to size. measuring tape on it's side) from seam/edge to seam/edge.
Measure channel along outer seam (with measuring tape on it's side) from edge to
edge. Measure along top edge of cup from front cup seam/edge to strap/body join.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 23 of 133
How To Measure Manual
1138; Overbust Cup Seam Length 1139; Overbust Cup Seam Position at Center Front
Measure from top edge of cup along curve (with measuring tape on it's side) to
Measure length of seam from edge to edge/seam. seam.
1140; Overbust Cup Seam Position at Underarm 1141; Total Wire Play
With wire end touching center front end of channel, measure distance between end
Measure along underarm edge from top edge of cup to seam. of wire and end of functional channel at side of cup.
Measure from bottom edge perpendicular to apex of overbust seam. Measure from top edge perpendicular to edge at apex of overbust seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 24 of 133
How To Measure Manual
1144; Center Front Panel width at Top 1145; Center Front Panel Width at Bottom
Measure distance between cups at top edge of front panel from seam to seam. Measure distance between cups at bottom edge of front panel from seam to seam.
Measure straight point to point. Measure straight point to point.
1146; Center Front Tab Height 1147; Front Tab Height at Cup Join - Front Closure
Measure tab height along curve (with measuring tape on it's side) from top edge to
Measure height from edge to edge at center front. bottom edge along cup at tab join.
1148; Front Tab Width at Top - Front Closure 1149; Front Tab Width at Bottom - Front Closure
Measure tab width at top along curve (with measuring tape on it's side) from cup/tab Measure tab width at bottom along curve (with measuring tape on it's side) from cup/
join to front closure. tab join to front closure.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 25 of 133
How To Measure Manual
Measure along curve (with measuring tape on it's side) between center front join and Measure along curve (with measuring tape on it's side) the length of wirecasing
wing join at cup edge. overlapping the bottom band elastic.
Measure along curve (with measuring tape on it's side) the length of bottom band
elastic at the top edge between wirecasings. Measure top edge along curve from cup seam to back strap join.
1154; Center Front Bottom Band from Seam to Seam 1155; Wing Height at Cup Join Along Seam
Measure along curve (with measuring tape on it's side) of bottom band at center
front from seam to seam. Measure edge to edge along curve (with measuring tape on it's side).
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 26 of 133
How To Measure Manual
Measure edge to edge, or natural fold at sideseam. Measure from front strap join to cup join along curve, relaxed.
Measure height of center back from edge to edge. Measure along curve from back strap/wing join seam to back closure/wing seam.
1160; Wing Length Along Top Relaxed 1161; Wing Length Along Bottom Relaxed
Measure along top edge of back wing (with measuring tape on it's side) from cup Measure along bottom edge of back wing from cup seam to back hook and eye tape
seam to back hook and eye tape seam, relaxed. seam, relaxed.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 27 of 133
How To Measure Manual
1162; Total Top Wing Length 1163; Total Bottom Wing Length
Measure top edge along curve from cup join to cup join. Measure along bottom edge curve from cup join to cup join.
1164; Bottom Band Circumference Relaxed 1165; Bottom Band Circumference Relaxed without Trim
With bra open, measure along bottom edge from edge to edge, excluding hook /
With bra open measure along bottom edge from hook to first (tightest) eye, relaxed. trim.
1166; Front Shelf Bra Height from High Point of Bodice 1167; Back Shelf Bra Height from High Point of Bodice
Measure straight from high point of bodice to bottom edge of elastic with garment Measure straight from high point of bodice to bottom edge of elastic with garment
turned inside out. turned inside out.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 28 of 133
How To Measure Manual
1168; Front Shelf Bra Height from High Point of Shoulder 1169; Back Shelf Bra Height from High Point of Shoulder
Measure straight from high point of shoulder to bottom edge of elastic with garment Measure straight from high point of shoulder to bottom edge of elastic with garment
turned inside out. turned inside out.
1170; Shelf Bra Height at Sideseam 1171; Shelf Bra Elastic Length
Measure straight from armhole edge to bottom edge of elastic with garment turned With elastic straightened and relaxed, measure along the elastic edge from
inside out. sideseam to sideseam with garment turned inside out.
1172; Bib Neck Opening at the Center of the Strap, Edge to Edge 1173; Bib Neck Width __ Above Center Front Neck Edge
At specified distance above center front neck edge, measure from inside neck edge
At neck opening measure from neck edge to neck edge. to inside neck edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 29 of 133
How To Measure Manual
1174; Bib Front Neck Drop Imaginary Line to Center Front Neck Edge 1175; Bib Width at Widest Point
Create an imaginary line across neck from the top of the straps. Measure from the
center of that line to the center front neck edge. At widest point, measure straight across from edge to edge.
1176; Bib Width 2" Up from Bottom Edge 1177; Center Front Bib Length
At 2" up from bottom edge, measure straight across from edge to edge. Measure from top edge to bottom edge at center front.
1178; Strap Width 2" from Strap Edge 1179; Bib Width 2" Below Center Front Edge
At 2" down from edge at the center front of the bib, measure straight across from
At 2" down from strap edge, measure strap width from edge to edge. edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 30 of 133
How To Measure Manual
Measure from top edge of bib to waist seam or top of waistband through center of
Measure along top edge from edge to edge. bib.
Measure from top edge of bib to waist seam or top of waistband, following side bib
shape. Measure along waist seam/stitch following waist shape, from edge to edge.
Measure from top edge of bib to waist seam or top of waistband through center of
bib. Measure from top edge to bottom edge/seam of waistband.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 31 of 133
How To Measure Manual
Line up front and back top edges of waistband to form a straight line. Measure Line up front and back top edges of band. Stretch to maximum and measure through
through the center of band from edge to edge. the center of band from edge to edge.
Line up top edges of waist. With elastic straightened and relaxed, measure at top
Measure back waist from sideseam to sideseam through the center. from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 32 of 133
How To Measure Manual
Measure straight at top edge of front from seam to seam. Measure straight at top edge of back from seam to seam.
1196; Waist at Center of Button Follow Waist Curve 1197; Waist at Seam-Overall
Line up front and back edges of the waist. Measure following the curve through the
center of the button from edge to edge. Measure along seam from edge to edge.
1198; Front Waistband Elastic-Full Length-Maternity 1199; Wearer's Left Waist Sideseam to Edge
Adjust button on elastic to the loosest setting. With tape on its edge, measure front Measure wearer's left waist from sideseam to front edge through center (or as
waist from seam to seam along curve. specified for contour bands).
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 33 of 133
How To Measure Manual
1200; Wearer's Right Waist Sideseam to Edge 1201; Waist Position from
No Image Available.
Measure wearer's right waist from sideseam to back edge through center (or as To determine the waist position, measure down from the point specified the
specified for contour bands). specified distance.
At specified waist position measure from edge to edge. If garment is bias cut, gently
smooth along both grains of fabric to achieve 90 degree at grain intersection. At 1/2 of the sideseam length, measure straight across from edge to edge.
No Image Available.
With waist fully extended and opened, measure from edge to edge. Measurement To determine the high hip position, measure down from the specified point the
should not be smaller than the measurement on the GSS. specified distance.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 34 of 133
How To Measure Manual
1206; Low Hip Position from_ 1207; Hip Position at Sideseam from Waist Seam
No Image Available.
To determine the low hip position, measure down from the specified point the
specified distance. To determine hip position, measure from waist seam along sideseam.
1208; Hip Position from Waist Seam 1209; Hip Position at Sideseam from Top Edge
Measure down specified distance from waist seam at side along folded edge, and at
center front where applicable. To determine hip position, measure from top edge of waist along sideseam.
1210; Hip Position from Top Edge 1211; Hip Position __ up from Inseam/Crotch edge
Measure down specified distance from top edge of waist at side along folded edge,
and at center front where applicable. Measure up from inseam/crotch edge to the distance specified in the GSS .
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 35 of 133
How To Measure Manual
1212; Hip-2 Point Measurement - Bottom 1213; Hip-2 Point Measurement - Top/Dress
At specified hip position measure straight across from edge to edge with pleats At specified hip position measure straight across from edge to edge with pleats
closed. If garment is bias cut, gently smooth along both grains of fabric to achieve closed. If garment is bias cut, gently smooth along both grains of fabric to achieve
90 degree at grain intersection. 90 degree at grain intersection.
1214; High Hip 3-Point Measurement 1215; Low Hip 3-Point Measurement
With waist falling in its natural position, lay the garment flat across the hip. At With waist falling in its natural position, lay the garment flat across the hip. At
specified hip position, measure from side edge to center front to side edge, with specified hip position, measure from side edge to center front to side edge, with
pleats closed. Top edge of tape should be placed at the hip position. pleats open. Top edge of tape should be placed at the low hip position.
1216; Hip 1" Up from Rib Seam 1217; Hip at Top of Leg Opening
At 1" up from side leg opening/trim seam, measure straight across from edge to Measure straight across from edge to edge at top of leg opening. If leg opening has
edge. trim, measure at top of trim.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 36 of 133
How To Measure Manual
1218; Hip at Top of Leg Opening-Folded 1219; Gusset Length at Leg Opening
With panty fold at top of leg opening, measure along curve (with measuring tape on
it's side), including trim. Measure at leg opening of gusset from front seam to back seam.
Measure from top seam to bottom seam/edge through center of gusset, including Fold garment with sideseams together, measure from gusset front to gusset back
trim if applicable. along center of gusset piece.
1222; Crotch Placement from Fold to Center of Snap 1223; Crotch Width at Opening
Measure from fold to center of snap. Measure at crotch opening edge to edge, including trim.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 37 of 133
How To Measure Manual
1224; Crotch Width at Narrowest Point 1225; Front Crotch Wdth 1" up from Edge
With garment unsnapped, at 1" up from crotch opening edge, measure straight from
Measure at narrowest point from edge to edge. edge to edge, including trim.
1226; Crotch Width 1" from Natural fold Including Trim 1227; Crotch Width 2" Above Seam
At 1" up from crotch opening/natural fold, measure straight from edge to edge,
including trim. At 2" above seam, measure straight from edge to edge.
At 4" up from crotch opening/natural fold, measure straight from edge to edge,
including trim. Measure straight from edge to edge at seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 38 of 133
How To Measure Manual
1230; Back Crotch Wdth 1 1/2" from Natural Fold 1231; Back Panel Width 2 1/2" from Crotch
At 1 1/2" up from crotch opening/natural fold, measure straight from edge to edge,
including trim. At 2 1/2" up from crotch, measure straight across from seam to seam.
1232; Cross Back Seat Width Position from ___ 1233; Back Seat Width at Ctr of Back Leg Opening-Bodysuit
No Image Available.
From the point specified in the GSS measure the back seat width across from edge At center of back leg opening (excluding snap tape), fold seat and measure along
to edge. curve.
1234; Cross Front Width Position Below Waist Edge 1235; Cross Front Width Position Above Crotch Seam
To determine cross front width position, measure down from waist edge. To determine cross front width position, measure up from the crotch seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 39 of 133
How To Measure Manual
1236; Cross Front Width Position Above Natural Fold 1237; Cross Front Width
To determine cross front width position, measure up from the natural fold at crotch. At specified cross front width position, measure straight across from edge to edge.
1238; Cross Back Seat Width Position Above Crotch Seam 1239; Back Seat Width
To determine cross back seat width position, measure up from the crotch seam. At specified across back width position, measure from edge to edge.
1240; Back Seat Width-2 Piece 1241; Crotch Seam Placement from Natural Fold
With garment folded in half from top of waistband to gusset seam, measure along
natural curve. At center back measure from natural fold of crotch up to seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 40 of 133
How To Measure Manual
1242; Cross Back Width at Narrowest 1243; Panel Width at Natural Fold
Line up front and back top edges and measure straight at natural fold from edge to
Measure from edge to edge at narrowest point. edge.
Measure straight across at front seam from edge to edge including leg trim. Measure from gusset/inseam intersection to gusset/inseam intersection.
1246; Fly Panel Seam Length 1247; Fly Opening Overlap at Center of Fly Opening
Measure seam from bottom of waistband to leg trim seam through the center. Measure overlap at center of fly opening from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 41 of 133
How To Measure Manual
1248; Fly Overlap at Top of Fly Opening 1249; Front Leg Opening Along Curve
With leg opening relaxed, measure along front curve (with measuring tape on it's
Measure overlap at top of fly opening from edge to edge. side) from sideseam to bottom of snap tape, with crotch unsnapped.
Line up front and back edges. With elastic straightened and relaxed, measure With elastic straightened and relaxed, measure leg opening from top edge or
straight from sideseam to natural fold. sideseam to crotch seam.
1252; Leg Opening along Curve 1253; Leg Opening Point to Point
Line up front and back edges, measure along outside edge from top of leg opening Lay garment flat in natural position and measure straight from top edge to bottom
to natural fold of crotch with tape on its edge. edge of leg opening, including snap tape with crotch snapped.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 42 of 133
How To Measure Manual
Line up front and back bottom edges with opening stretched to maximum and
Line up front and back bottom edges with opening relaxed and measure along measure along bottom edge from outside edge to outside edge (with snaps closed, if
bottom edge from outside edge to outside edge (with snaps closed, if applicable). applicable).
1256; Wearers Left Bottom Sweep 1257; Wearer's Right Bottom Sweep
With tape on its edge, measure along sweep of wearer's left panel along bottom With tape on its edge, measure along sweep of wearer's right panel along bottom
edge from sideseam to panel edge. edge from sideseam to panel edge.
Line up front and back edge of garment. With tape on its edge, measure along curve
Measure straight at bottom of garment edge to edge with vents closed. On uneven from edge to edge with vents or pleats closed. If garment is bias cut, gently smooth
hems measure straight at shortest hem. along both grains of fabric to achieve 90 degree at grain intersection.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 43 of 133
How To Measure Manual
Measure straight from seam to seam at top of vent/tails. Measure with pleats open With bodice band fully extended and opened, measure from edge to edge.
and fullness spread out. Measurement should not be smaller than the measurement on the GSS.
1262; Minimum Bottom Hem Stretch from 5" to ____ 1263; Minimum Leg Opening Stretched
Stretch specified amount of hem to maximum amount possible without breaking With leg fully extended and opened, measure from edge to edge. Measurement
stitches. should not be smaller than the measurement on the GSS.
1264; Strap Length Join to Join 1265; Strap Length Join to Ring with __" Loop Formed
Measure from front strap/body join to back strap/body join. Measure from ring to strap join seam with specified loop size formed in strap.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 44 of 133
How To Measure Manual
1266; Underarm Length Relaxed 1267; Armhole from Sideseam to Base of Strap Along Curve
Measure from front strap join to back strap join along curve (with measuring tape on Measure along curve (with measuring tape on it's side) from front strap/body join to
it's side), relaxed. side seam.
1268; Armhole from Sideseam to Base of Strap - Cami 1269; Strap Placement from Sideseam
With elastic straightened and relaxed, measure at top edge from sideseam to outer
Measure straight from front strap/body join to side seam. edge of back strap/body join.
1270; Strap Length - Join to Ring 1271; Self Strap Width at Ring
Measure straight from extension join or bartack to ring. Measure width of strap from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 45 of 133
How To Measure Manual
Measure straight from edge to edge. Measure straight from edge to edge.
Line up front and back armhole. With elastic straightened and relaxed, measure from With armhole stretched to maximum, measure from natural fold of shoulder to
edge to edge of armhole. underarm seam point to point.
1276; Armhole Straight - 2 Point Measurement 1277; Front Armhole Along Curve
Lay body and armhole flat, with armhole in its natural shape. Measure from natural
fold of shoulder to underarm at armhole seam point to point. If garment has trim, With measuring tape on its side, measure along front armhole seam or edge from
measure point to point incl. trim. top to bottom of armhole edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 46 of 133
How To Measure Manual
1278; Back Armhole Along Curve 1279; Front Raglan Armhole - 2 Point Measurement
With measureing tape on its side, measure along back armhole seam or edge from Measure straight point to point from armhole seam at neckline to sideseam on front
top to bottom of armhole edge to edge. body.
1280; Back Raglan Armhole - 2 Point Measurement 1281; Raglan Armhole Straight from Imaginary Line
Measure straight point to point from armhole seam at neckline to sideseam on back Create an imaginary line from high point of shoulder to high point of shoulder.
body. Measure from the center of that line to the bottom of armhole.
1282; Raglan Position from High Point Shoulder at Front 1283; Raglan Position form High Point Shoulder at Back
Measure straight from high point of shoulder to raglan seam at front neck. Measure straight from high point of shoulder to raglan seam at back neck.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 47 of 133
How To Measure Manual
1284; Front Raglan Armhole Along Curve 1285; Back Raglan Armhole Along Curve
Measure along curve (with measuring tape on it's side) from armhole seam at Measure along curve (with measuring tape on it's side) from armhole seam at
neckline to sideseam on front body. neckline to sideseam on back body.
1286; Raglan Saddle Position from High Point Shoulder 1287; Raglan Saddle Width Seam to Seam
To determine raglan saddle position, measure down from high point of shoulder to At specified raglan saddle position, measure across front from seam to seam at
turning point position of saddle to the distance specified in the GSS. turning point of saddle.
With armhole fully extended and opened, measure from edge to edge. Measurement
Measure straight across from sideseam to turning point position of armhole. should not be smaller than the measurement on the GSS.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 48 of 133
How To Measure Manual
1290; Sleeve Length from Center Back 1291; Sleeve Length from Shoulder Seam
Determine center back neck point by measuring shoulder width and marking center
point at neck seam/edge. Measure from this point to shoulder/armhole seam then Measure straight at top of sleeve from armhole seam to bottom edge of cuff or
straight to bottom edge of cuff or sleeve. sleeve opening.
1292; Underarm Sleeve Length 1293; Raglan Sleeve Length from Imaginary Line-2 Point
Measure underarm seam straight from armhole seam to bottom edge of cuff or Create an imaginary line from high point of shoulder to high point of shoulder.
sleeve opening. Measure from the center of that line to the bottom of cuff or sleeve opening.
1294; Raglan Sleeve Length From Neck 1295; Raglan Sleeve Length from Neck
Seam at High Point Shoulder-2 Point Seam at High Point Shoulder along Curve
Measure straight at top of sleeve from high point of shoulder, to bottom edge of cuff Measure along curve (with measuring tape on it's side) at top of sleeve from high
or sleeve opening. point of shoulder to bottom edge of cuff or sleeve opening.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 49 of 133
How To Measure Manual
1296; Raglan Sleeve Length from Center Back-3 Point 1297; Sleeve Cap Height
Determine center back at neck seam by measuring neck width and marking center
point. Measure from this point straight to high point of shoulder then measure to Create an imaginary line from top of underarm seam parallel to sleeve opening.
bottom edge of cuff or sleeve opening along curve (with measuring tape on it's side). Measure from top of sleeve to imaginary line along sleeve fold.
At 1" below armhole, at right angle to sleeve fold, measure from edge to edge. At specified elbow position, measure at a right angle to sleeve fold, edge to edge.
At specified forearm position, measure at a right angle to sleeve fold, edge to edge. Measure across bottom edge of sleeve from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 50 of 133
How To Measure Manual
1302; Sleeve Opening - Rib/Elastic Rlxd 1303; Sleeve Cuff Opening with Buttons
Measure at bottom edge of sleeve from folded edge to folded edge with rib/elastic With cuff buttoned at first button from edge, measure through center of cuff from
relaxed. folded edge to folded edge.
1304; Sleeve Placket Position from Underarm Seam 1305; Sleeve Placket Length
Measure from underarm seam to sleeve placket along cuff seam. Measure from placket point or end to cuff seam.
Measure from cuff seam or sleeve opening to end of functional placket opening. Measure from edge to seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 51 of 133
How To Measure Manual
1308; Sleeve Placket - Doghouse Length at Side 1309; Sleeve Pleat Depth
At side of placket, measure from end of functional placket opening to end of placket. Measure the underlay from top fold to inside fold of the same pleat.
1310; 1st Sleeve Pleat Position from Placket Seam 1311; 2nd Sleeve Pleat Position from Placket Seam
Measure from placket seam to fold of first pleat. Measure from placket seam to fold of second pleat.
With mitten closed over sleeve opening, measure from sleeve opening seam to edge
of mitten. Measure from top edge to bottom edge through center of mitten.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 52 of 133
How To Measure Manual
1314; Distance from Top of Mitten to Base of Thumb 1315; Mitten Width __ from Top Edge
Measure from center of top of mitten to imaginary line or seam at base of thumb. At specified distance down from top edge measure straight across edge to edge.
1316; Thumb Length from Intersection 1317; Thumb Length Top of Thumb to Bottom Opening
Measure straight from thumb intersection to center top edge of thumb. Measure straight from bottom edge to center top of thumb.
1318; Thumb Position Vertical from Bottom Edge 1319; Thumb Position Horizontal from Inside Edge
Measure from bottom edge to thumb join. Measure from inside edge to thumb join.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 53 of 133
How To Measure Manual
Measure from top edge of middle finger to bottom edge of glove at center. Measure at thumb intersection from edge to edge.
1322; Width at Base of Thumb 1323; Thumb Crotch from Index Finger Base
Measure at base of thumb intersection from edge to edge. Measure straight from intersection of index and middle finger to crotch of thumb.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 54 of 133
How To Measure Manual
1326; Tip of Middle Finger to Base of Thumb 1327; Index Finger Length
Measure from tip of middle finger to imaginary line or seam at base of thumb. Measure from base of finger/seam to center top edge.
Measure from base of finger/seam to center top edge. Measure from base of finger/seam to center top edge.
1330; Little Finger Length 1331; Front body length from high point of bodice
Measure from base of finger/seam to center top edge. Measure from front strap/body join to bottom edge of garment, including trim.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 55 of 133
How To Measure Manual
1332; Back Body Length from High Point of Bodice 1333; Bodice Length from High Point Shoulder
Measure from back strap/body join to bottom edge of garment, including trim. Measure from high point of shoulder at neck to waist seam.
1334; Center Front Bodice Length 1335; Center Back Bodice Length
Measure from center front neck seam/edge (excluding collar and stand) to waist Measure from center back neck seam/edge (excluding collar and stand) to waist
seam. seam.
1336; Bodice Sideseam Length 1337; Front Body Length from Shoulder/ Neck Seam
Measure along sideseam from armhole seam/edge to waist seam or bottom edge. Measure from shoulder seam at neckline to bottom edge of garment.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 56 of 133
How To Measure Manual
1338; Body Length from High Point Shoulder 1339; Center Front Length
Measure from center front neck seam/edge (excluding collar and stand) to bottom
Measure from high point of shoulder at neckline to bottom edge of garment. edge of garment.
1340; Back Body Length from High Point Shoulder 1341; Center Back Length
Measure from center back neck seam/edge (excluding collar and stand) to bottom
Measure from high point of shoulder at back to bottom edge of garment. edge of garment.
1342; Center Front Length - Hanging 1343; Center Back Length - Hanging
On hanger, measure from center front neck seam/edge to bottom edge of garment. On hanger, measure from center back neck seam/edge to bottom edge of garment.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 57 of 133
How To Measure Manual
1344; Skirt Length from Waist Seam 1345; Skirt Length to Top Edge
1346; Skirt Sideseam Length to Waist Seam 1347; Skirt Sideseam Length to Top Edge
Measure sideseam from bottom of waistband or waist seam to bottom edge of skirt, Measure sideseam from top edge of waist or waistband to bottom edge of skirt,
following shape of the sideseam. following shape of sideseam.
Measure along sideseam, or natural fold, from top edge of waistband to leg opening
edge. Measure along sideseam from bottom of waistband to bottom edge of leg.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 58 of 133
How To Measure Manual
1350; Outseam to Top Edge 1351; Vertical Trunk from Strap Join
Measure along sideseam from top edge of waist to bottom edge of leg. This
measurement includes the waistband. Measure from front strap/body join to center of crotch at natural fold point to point.
1352; Vertical Trunk 1353; Center Front Body Length Along Curve Top Edge to Seam
Fold garment with sideseams and leg openings together. With measuring tape on
Measure from high point of shoulder to bottom of crotch at natural fold point to it's side, measure along center front from top edge to crotch seam, with fullness
point. smoothed out.
1354; Center Back Body Length Along Curve Top Edge to Seam 1355; Sideseam Edge to Edge - 1 Piece
Fold garment with sideseams and leg openings together. With measuring tape on
it's side, measure along center back from top edge to crotch seam, with fullness Measure along sideseam from armhole edge/seam to leg opening edge, including
smoothed out. trim.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 59 of 133
How To Measure Manual
1356; Front Rise to Top Edge 1357; Back Rise to Top Edge
Measure from top edge of waist along front rise to inseam join. This measurement Measure from top edge of waist along back rise to inseam join. This measurement
includes the waistband. (Refer to HTM guidelines for garments with fell stitching) includes the waistband. (Refer to HTM guidelines for garments with fell stitching)
1358; Front Rise to Waist Seam 1359; Back Rise to Waist Seam
Measure from bottom of waistband along back rise to inseam join (Refer to HTM
Measure from bottom of waistband along rise seam to inseam join. guidelines for garments with fell stitching at the rise).
1360; Front Rise to Panel Seam-Maternity 1361; Front Rise from Top Edge to Snap Placket Edge
Measure from inseam to panel seam along front rise seam. (Refer to HTM guidelines Measure from top edge of waist along front rise to inseam placket edge. This
for garments with fell stitching) measurement includes the waistband.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 60 of 133
How To Measure Manual
1362; Back Rise from Top Edge Snap Placket Stitch 1363; Front Rise from Waist Seam to Snap Placket Edge
Measure from top edge of waist along back rise to inseam placket stitch line. This
measurement includes the waistband. Measure from waist seam along front rise to inseam placket edge.
1364; Back Rise from Waist Seam to Snap Placket Stitch 1365; Front Rise to Top Edge along Curve
Fold garment with sideseams together. Measure along center front from top edge to
Measure from waist seam along back rise to inseam placket stitch line. crotch seam.
1366; Back Rise to Top Edge along Curve 1367; J-Stitch Length to Bottom of Waistband
Fold garment with sideseams together. Measure along center back from top edge to
crotch seam. Measure from bottom of waistband to outside row of stitches.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 61 of 133
How To Measure Manual
Measure from top edge of waist to outside row of stitches. Measure from fly edge to outside row of stitches.
1370; Functional Fly Opening 1371; Fly Opening Distance from Top Edge/Waist Seam
With the zipper or buttons closed, measure from bottom of waistband to front join or
bartack. Where there is no waistband, measure from the top edge of waist. Measure at top of fly to top edge or bottom of waistband.
1372; Front Rise to Top Edge/Neck Seam 1373; Back Rise to Top Edge/Neck Seam
Measure from top of garment or neck seam/edge along front rise to inseam join or Measure from top of garment or neck seam/edge along back rise to inseam join or
inseam placket edge. This measurement includes waistband. inseam placket edge. This measurement includes waistband.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 62 of 133
How To Measure Manual
1374; Drop Back Flap Tail Height 1375; Drop Back Flap Placement Vertical from Armhole
Create an imaginary line at top edge from sideseam to sideseam. Measure distance
between center flap top edge and imaginary line. Measure along sideseam from armhole seam to top edge of flap.
To determine thigh position, measure down from rise seam along inseam the
distance specified in the GSS. (Refer to HTM guidelines for garments with fell
At bottom of gusset with snaps closed, measure straight from edge to edge. stitching at the rise).
At specified distance from the rise seam along the inseam, measure straight across
edge to edge parallel to leg opening. (Refer to HTM guidelines for garments with fell To determine knee position, measure down from rise seam along inseam. (Refer to
stitching at the rise). HTM guidelines for garments with fell stitching at the rise).
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 63 of 133
How To Measure Manual
At specified knee position, measure straight across edge to edge parallel to leg Measure from rise seam along inseam to leg seam. (Refer to HTM guidelines for
opening. garments with fell stitching at the rise).
To determine calf position, measure down from rise seam along inseam. (Refer to At specified calf position, measure straight across from edge to edge parallel to leg
HTM guidelines for garments with fell stitching at the rise). opening.
Measure from rise seam to bottom of leg opening following shape of the inseam. Measure from center of gusset at edge/seam to bottom opening edge following the
(Refer to HTM guidelines for garments with fell stitching at the rise). shape of the inseam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 64 of 133
How To Measure Manual
1386; Inseam from Gusset/Rise Seam to Foot Seam 1387; Stirrup Inseam without Elastic
Measure from center of gusset at folded edge/seam along inseam edge to foot join
seam. If no gusset, measure from rise seam along inseam edge to foot join seam. Measure from rise seam to bottom of stirrup at seam following curve.
1388; Stirrup Inseam with Elastic 1389; Stirrup Height With Elastic
Fold stirrup matching inseam to outseam. Measure from top of stirrup to elastic
Measure from rise seam to elastic seam excluding elastic. seam.
Fold stirrup matching inseam to outseam. Measure from top of stirrup to bottom
edge. Measure stirrup at bottom, edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 65 of 133
How To Measure Manual
1392; Length from Top Edge to Toe Point at Center 1393; Length from Top Edge To Heel Point
Measure from top edge to toe point at center of sock. Measure from top edge to heel point.
Measure from heel to toe point. Measure at center of foot edge to edge.
1396; Width __ Below Top Edge 1397; Leg Opening Along Top Edge
At specified distance below top edge, measure straight across from edge to edge. Measure at top edge from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 66 of 133
How To Measure Manual
1398; Sole Length-Heel to Toe 1399; Sole Width __" from Toe Seam
At specified distance from toe edge, measure straight across edge/seam to edge/
Measure from heel to toe point from edge/seam to edge/seam. seam.
1400; Sole Width __" from Heel Seam 1401; Sole Width at Widest Point
At specified distance from heel seam, measure straight across edge/seam to edge/
seam. Measure sole at widest point from edge/seam to edge/seam.
1402; Strap Holder/Tongue Length 1403; Shoe Top Length / Vamp Height
Measure from end/seam to end. Measure from toe seam to top edge following shape of shoe.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 67 of 133
How To Measure Manual
1404; Shoe Height at Center Back 1405; Shoe Opening at Top Edge
Measure opening from edge to edge. If shoe has elastic, measure with elastic
Measure at center back from seam to top edge. stretched to maximum.
Measure from toe seam to ankle seam at center. Measure from seam to seam along ankle seam.
Measure from top edge to bottom edge along side of beltloop. Measure from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 68 of 133
How To Measure Manual
1410; Beltloop Placement Horizontal from_ 1411; Beltloop Placement Vertical from_
Measure from the point specified on GSS to the beltloop. Measure from the point specified on GSS to the beltloop.
Measure from folded edge of loop to edge of knot, when tied. Measure from end of tail to edge of knot, when tied.
No Image Available.
Measure from edge to edge. Measure from the point specified on GSS to center of knot.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 69 of 133
How To Measure Manual
No Image Available.
Measure from top to bottom of pom pom. Count the number of buttons/snaps at the specified point.
Measure from specified point to center of button/snap. Measure from the point specified on GSS to the center of button/snap.
1420; Button/Snap Placement Vertical from ___ 1421; Button/Snap Placement Horizontal from ___
Measure from the point specified on GSS to the center of button/snap. Measure from the point specified on GSS to the center of button/snap.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 70 of 133
How To Measure Manual
No Image Available.
Measure from specified point to center of last button/snap. Measure from center of button/snap to center of button/snap.
1424; Horizontal Button/Snap Spacing 1425; Collar Button/Snap Placement Vertical from Neck Seam
Measure from center of button/snap to center of button/snap. Measure from neck seam to center of button/snap.
1426; 1st Button/Snap Placement from 1427; 1st Button/Snap Placement from Waist Seam
Neck Edge/Seam to Center of Button/Snap
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 71 of 133
How To Measure Manual
1428; 1st Button/Snap Placement from Rise Seam 1429; Button/Snap Placement Horizontal from Front Edge
Measure from rise seam to center of first button/snap. Measure from center of butto/snap to front edge of garment.
1430; Last Button/Snap Placement from Bottom Edge 1431; Dart Length
Measure from center of button/snap to bottom edge. Measure dart from end to end.
Measure dart from seam to end. Measure edge to stitch at widest point.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 72 of 133
How To Measure Manual
1434; Front Dart Placement from__ 1435; Back Dart Placement from_
Measure from the point specified on GSS to the dart. Measure from the point specified on GSS to the dart.
1436; Princess Seam/Dart Placement from Center Front/Edge 1437; Distance Between Back Darts at Hem
Measure from dart to dart along curve (with measuring tape on it's side) at bottom
Measure from center front edge to princess seam or dart stitch. hem.
Measure drawcord extended from center back to end of drawcord tips. For kids 2 Measure in relaxed position and drawcord fully extended from opening to end of
piece drawcord: Measure from sideseam to end. drawcord.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 73 of 133
How To Measure Manual
Measure from edge to edge. Measure straight along tie/cord/belt, end/seam to end, relaxed.
1444; Tie/Belt Placement Horizontal from_ 1445; Tie/Belt Placement Vertical from_
Measure from the point specified on GSS to the tie/belt. Measure from the point specified on GSS to the tie/belt.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 74 of 133
How To Measure Manual
Measure elastic from stitch/seam to stitch/seam as specified in the GSS. Measure from point specified on GSS to the bottom edge of the elastic.
1448; 3" of ____Elastic Stretches to ___ 1449; 5" of ____Elastic Stretches to ___
Stretch specified amount of elastic to maximum amount possible without breaking Stretch specified amount of elastic to maximum amount possible without breaking
stitches or fabric distortion. stitches or fabric distortion.
No Image Available.
Measure the distance specified on the GSS from the center of eyelet/grommet/ Measure from point specified on the GSS to the center of eyelet/grommet/
buttonhole to the center of eyelet/grommet/buttonhole. buttonhole.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 75 of 133
How To Measure Manual
1452; Eyelet/Grommet/Buttonhole Placement Horizontal from ____ 1453; Eyelet/Grommet/Buttonhole Placement Vertical from ____
Measure from point specified on the GSS to the center of eyelet/grommet/ Measure from point specified on the GSS to the center of eyelet/grommet/
buttonhole. buttonhole.
Measure from facing seam/join to outside edge of facing. Measure from edge to edge.
No Image Available.
Measure from point specified on GSS to the edge of the pattern. Measure from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 76 of 133
How To Measure Manual
No Image Available.
Measured from the point specified in the GSS to the edge of the stripe. Measure from top edge to bottom edge at center.
No Image Available.
Measure from edge to edge at center. Measured from the point specified in the GSS to the edge of the graphics.
No Image Available.
Measured from the point specified in the GSS to the edge of the graphics. Measure from top of keyhole to imaginary line at bottom edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 77 of 133
How To Measure Manual
Measure from edge to edge with elastic relaxed. Measure opening from edge to edge at widest point.
Measure from seam to seam. Measure from end to end through center of loop.
No Image Available.
Measure from inside edge to inside edge. Measure from point specified to specified distance.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 78 of 133
How To Measure Manual
Measure from edge of right overlap to edge of left overlap at edge/seam. Measure length of miter from corner to corner.
Measure from sideseam to edge of overlap. Measure along edge from v-point to end.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 79 of 133
How To Measure Manual
Measure from seam to seam at bottom. Measure from top to bottom of panel through center.
1480; Panel Height at Panel Seam 1481; Center Panel Width at Widest Point
Measure from top to bottom of panel at panel seam (with measuring tape on it's
side). Measure from seam to seam through center of panel at it's widest point.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 80 of 133
How To Measure Manual
1484; Patch Width 1485; Patch Placement Vertical from Bottom Edge
Measure from edge to edge through center. Measure up from bottom edge of garment to bottom edge of patch.
1486; Patch Placement Horizontal ____ 1487; Back Seat Patch Position from Waist Seam
Measure across from seam/edge to side edge of patch at center. Measure patch from top to bottom at center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 81 of 133
How To Measure Manual
1488; Back Seat Patch Position from Top Edge 1489; Back Seat Patch Length
Measure across patch at widest point. Measure patch from top to bottom at center.
Measure along front edge from neck seam/edge (excluding collar and stand) to
Measure across patch at widest point. bottom of placket or last stitch line.
Measure from edge to edge/stitch. Measure placket box height from top row stitch line to bottom stitch line.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 82 of 133
How To Measure Manual
Measure the underlay from top fold to inside fold of the same pleat/tuck at waist or
hem, or as specified in the GSS. Measure outside pleat width from fold edge to fold edge.
1498; Back Pleat Placement from Armhole 1499; Pleat Depth: 1st Pleat from Center Front
Measure the underlay of the first pleat from center front from top fold to inside fold
Measure from pleat folded edge straight to armhole seam. of the same pleat at waist or hem.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 83 of 133
How To Measure Manual
1500; Pleat Depth: 2nd Pleat from Center Front 1501; Pleat Placement: 1st Pleat from Center Front
Measure the underlay of the second pleat from center front from top fold to inside
fold of the same pleat at waist or hem. Measure from center front to top folded edge of 1st pleat on outside of garment.
1502; Pleat Placement: 2nd Pleat from Center Front 1503; Width __ above Rib/Cuff Seam
At specified distance up from seam, measure straight from edge to edge parallel to
Measure from center front to top folded edge of 2nd pleat on outside of garment. bottom, flattening out fullness.
Measure at bottom edge of cuff from folded edge to folded edge with rib/elastic
relaxed. Measure rib/cuff/welt from seam/topstitching to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 84 of 133
How To Measure Manual
Measure along seam edge to edge, relaxed. Measure from edge of garment to ruffle seam.
1510; Distance Between Ruffle Rows Seam to Seam 1511; Ruffle Placement from Crotch
Measure from seam to seam. Measure from crotch seam to ruffle seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 85 of 133
How To Measure Manual
Measure shirring length straight from end to end at stitch/seam. Measure from the specified point to the start of the shirring.
No Image Available.
Measure from edge of specified point to stitch line. If multi-needle, measure to the
Measure from natural fold to sideseam. outer stitch.
Measure from bottom edge to top stitch line. Measure from the edge/top stitch to bottom stitch of casing.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 86 of 133
How To Measure Manual
1518; Casing Placement Horizontal from_ 1519; Casing Placement Vertical from_
To determine the casing placement position, measure down from the point specified To determine the casing placement position, measure across from the specified
in the GSS the specified distance. point the specified distance.
Measure from shoulder seam to end of topstitch. Measure from bottom of waistband to end of cord stitch.
With strap in specified strap slider position, measure from back strap join to folded
end at hasp. Measure along inside strap edge from end of strap to strap/body join seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 87 of 133
How To Measure Manual
No Image Available.
Measure from fold at center of slider to folded edge of hasp on back of strap. Measure from edge to edge of strap at specified point.
Measure from center front/back extension to point/edge. Measure from edge to edge/seam through center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 88 of 133
How To Measure Manual
No Image Available.
Measure from specified area to edge of tab. Measure vertical from point edge/seam to edge/seam at widest part of triangle.
Measure horizontal from edge/seam to edge/seam at widest part of triangle. Measure from top to bottom at center of diamond.
Measure along side edge of diamond from top to bottom. Measure from edge to edge/seam
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 89 of 133
How To Measure Manual
No Image Available.
Measure the trim length from end to end at the secified point. Measure from edge of garment to seam/stitch width.
Create an imaginary line from sideseam edge to sideseam edge. Measure distance
Measure from bottom edge of garment to top of vent/slit opening. between center bottom edge and imaginary line.
1540; Back Half Moon Height 1541; Back Half Moon Width
Measure from neck or collar seam to bottom row of stitching on half moon at center
back. Measure straight across top of half moon from outside stitch to outside stitch.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 90 of 133
How To Measure Manual
1542; Center Front Yoke Height 1543; Front Yoke Height from High Point of Shoulder
Measure from center front neck seam (excluding collar and stand) to yoke seam. Measure from high point of shoulder to yoke seam.
1544; Front Yoke Height from Shoulder/Neck Seam 1545; Front Yoke Length Along Neck Seam
Measure from shoulder/neck seam to yoke seam. Measure along neck seam from shoulder seam to yoke seam.
1546; Front Yoke Width 1547; Front Yoke Point from Front Edge
Measure yoke from edge/seam to edge/seam at yoke seam. Measure straight from front edge to point of yoke.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 91 of 133
How To Measure Manual
1548; Back Yoke from High Point of Shoulder 1549; Center Back Yoke Height
Measure from center back neck seam/edge (excluding collar and stand) to yoke
Measure from high point of shoulder to yoke seam. seam.
1550; Back Yoke Point Height 1551; Distance Between Back Yoke Points
Create imaginary line from yoke point to yoke point. Measure from neck or collar
seam to imaginary line. Measure from point to point.
Measure along armhole seam from yoke edge to yoke edge or to shoulder seam Measure from top of yoke to bottom of yoke at center. Measurements are taken to
according to styling. the yoke seam, regardless of fell stitching.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 92 of 133
How To Measure Manual
Measure from top of yoke to bottom of yoke at side seam. Measurements are taken
to the yoke seam, regardless of fell stitching. Measure from inside edge to inside edge.
Measure from top edge of zipper to bottom of slider. Measure from top edge to bottom edge.
Measure from seam to edge. Measure from top edge to bottom edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 93 of 133
How To Measure Manual
Measure from seam to edge. Measure from top edge to bottom edge at center of flap.
Measure from top edge to bottom edge at side of flap. Measure edge to edge at top of flap.
Measure from edge to edge at bottom of flap. Measure from top edge to bottom edge at center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 94 of 133
How To Measure Manual
Measure at side of pocket from top edge to bottom edge. Measure from edge to edge at top.
Measure from edge to edge at bottom. Measure opening from edge to edge.
Measure height of welt from edge to edge. If double welt, measure total height of
pocket. Measure from top of pocket to bottom edge through center of pocket, including flap.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 95 of 133
How To Measure Manual
1572; Bib Pocket Height at Side 1573; Bib Pocket Width at Top
Measure straight from top of pocket to bottom edge, including flap. Measure at top edge of pocket from edge to edge.
1574; Bib Pocket Width at Widest Point 1575; Bib Pocket Width at Bottom
Measure at widest point of pocket from edge to edge. Measure at bottom edge of pocket from edge to edge.
1576; Bib Pocket Center Panel Width 1577; Bib Pocket Placement Vertical from Top Edge
Measure from seam to seam at top edge of pocket panel. Measure from top edge of bib to top edge of bib pocket.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 96 of 133
How To Measure Manual
Measure from top edge to bottom row of stitching. Measure from edge to outside row of stitching.
1580; Kangaroo Pocket Height at Center 1581; Kangaroo Pocket Height at Sides
Measure from top edge to bottom edge/seam of pocket at center, excluding trim. Measure from top edge to bottom edge of pocket at side, excluding trim.
1582; Kangaroo Pocket Width at Top 1583; Kangaroo Pocket Width at Bottom
Measure from edge to edge at top of pocket, excluding trim. Measure from edge to edge at bottom of pocket, excluding trim.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 97 of 133
How To Measure Manual
1584; Kangaroo Pocket Width at Widest Point 1585; Kangaroo Pocket Opening
Measure across horizontally from edge to edge at the widest point. Measure opening straight from point to point.
Measure opening from end to end. Measure opening along seam from waist seam to join or bartack.
1588; Front Pocket Opening along Scoop 1589; Front Slash Pocket Opening
Measure along pocket edge from waistband seam to sideseam. Where there is no
Measure along pocket edge from waistband seam to sideseam with measuring tape waistband, measure from the top edge of waist. If there are bartacks, measure from
on its side. Where there is no waistband, measure from the top edge of waist. bartack to bartack.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 98 of 133
How To Measure Manual
1590; Pocket Opening Horizontal Along Waist 1591; Pocket Opening Vertical Along Sideseam
Measure along waist seam from sideseam to pocket opening edge. Where there is Measure along sideseam from waist seam to pocket opening edge. Where there is
elastic, measure with elastic stretched to maximum. no waistband, measure from top edge of waist.
1592; Coin Pocket Width at Top 1593; Coin Pocket Width at Bottom
Measure along top edge from edge to edge. Measure along bottom edge from edge to edge.
1594; Coin Pocket Height at Center 1595; Coin Pocket Height at Side
Measure at center of pocket from top edge to bottom edge. Measure at side of pocket from top edge to bottom edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 99 of 133
How To Measure Manual
1596; Coin Pocket Height to Single Needle Stitch 1597; Coin Pocket Placement Horizontal from Sideseam
Measure from top edge of pocket to single needle stitch. Measure from sideseam to coin pocket edge.
1598; Coin Pocket Placement Vertical from Waist Seam 1599; Coin Pocket Placement Vertical from Top Edge
Measure from waistband seam to top of pocket at center or at corners if pocket is Measure from top edge of waist to top of pocket at center or at corners if pocket is
not parallel to seam. not parallel to seam.
1600; Inner Coin Pocket Opening 1601; Inner Coin Pocket Height at Center
Measure pocket opening edge to edge. Measure from top edge to bottom edge of pocket at center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 100 of 133
How To Measure Manual
1602; Tool Pocket Opening 1603; Tool Pocket Height at Inside Edge
Measure along opening edge to edge. Measure from top corner of pocket to bottom of pocket at inside edge.
1604; Tool Pocket Height at Sideseam 1605; Tool Pocket Width at Bottom
Measure from top corner of pocket to bottom of pocket at sideseam. Measure along bottom from edge to edge.
Measure from end to end through center of loop (Untwisted). Measure from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 101 of 133
How To Measure Manual
1608; Hammer Loop Position Below Bottom of Pocket 1609; Pocket Hem Height at Center
Measure from edge of pocket to stitch line at center. If multi needle, measure to
Measure at sideseam from bottom of front pocket opening to top of hammer loop. outer stitch line.
Measure from edge of pocket to stitch line at side. If multi needle, measure to outer
stitch line. Measure the underlay from top fold to inside fold of the same pleat at waist or hem.
1612; Pocket Box Pleat Width 1613; Pocket Bellow Width at Side
Measure from folded edge to folded edge. Measure from edge to edge at side of pocket.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 102 of 133
How To Measure Manual
Measure from edge to edge at bottom of pocket. Measure from side stitch to side stitch.
On inside of garment, measure from sideseam across widest point of pocket bag to
edge, or if not attached, measure from side to side. At inside of back pocket, measure from pocket opening to bottom of pocket bag.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 103 of 133
How To Measure Manual
1620; Chest/Top Pocket Placement Vertical from_ 1621; Chest/Top Pocket Flap Placement Vertical from_
Measure from the point specified on GSS to the pocket edge. Measure from the point specified on GSS to the flap edge.
1622; Chest/Top Pocket Position Horizontal from_ 1623; Chest/Top Pocket Flap Placement Horizontal from_
Measure from the point specified on GSS to the pocket edge. Measure from the point specified on GSS to the flap edge.
1624; Chest/Top Pocket Placement Vertical from High Point Shoulder 1625; Pocket Flap Placement Vertical from High Point Shoulder
Measure from Shoulder Seam/Neck Seam to Top of Pocket Flap Measure from high point of shoulder to flap edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 104 of 133
How To Measure Manual
1626; Pocket Flap Placement Vertical from Shoulder/Neck Seam 1627; Pocket Placement Vertical from High Point Shoulder
Measure from shoulder/neck seam to flap edge. Measure from high point of shoulder to pocket edge.
1628; Pocket Placement Vertical from Shoulder/Neck Seam 1629; Chest/Top Pocket Placement Horizontal from Lapel Edge
Measure from shoulder/neck seam to pocket edge. Measure from lapel edge to pocket edge.
1630; Chest/Top Pocket Placement Horizontal from Front Edge 1631; Chest/Top Pocket Placement Horizontal from Center Front
Measure from front edge of garment to pocket edge. Measure from center front of garment to pocket edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 105 of 133
How To Measure Manual
1632; Pocket Flap Placement Horizontal from Center Front 1633; Lower Pocket Placement Horizontal from_
No Image Available.
Measure from center front of garment to flap edge. Measure from the point specified on GSS to the pocket edge.
1634; Pocket Placement Vertical from Bottom Edge-Front Corner 1635; Pocket Placement Vertical from Bottom Corner
Measure from bottom edge of garment to front corner of pocket. Measure from bottom edge of garment to side corner of pocket.
1636; Pocket Placement Vertical from Bottom Edge 1637; Pocket Flap Placement Vertical from Bottom Edge
Measure from bottom edge of garment to top or bottom of pocket or welt seam. Measure from bottom edge of garment to flap edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 106 of 133
How To Measure Manual
1638; Pocket Placement Horizontal from Front Edge-Top Corner 1639; Pocket Placement Horizontal from Front Edge-Bottom Corner
Measure from front edge of garment to top corner of pocket. Measure from front edge of garment to bottom corner of pocket.
1640; Pocket Placement Horizontal from Front Edge 1641; Pocket Flap Placement Horizontal from Front Edge
Measure from front edge to edge of pocket. Measure from front edge of garment to flap edge.
1642; Lower Pocket Placement Horizontal from Center Front 1643; Back Pocket Placement Vertical from High Point Shoulder
Measure from center front of garment to pocket edge. Measure from high point of shoulder to top of pocket.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 107 of 133
How To Measure Manual
1644; Back Pocket Placement Vertical from Top Edge-Overall 1645; Back Pocket Placement Horizontal from__
No Image Available.
Measure from top edge at CB to top of pocket inside corner. Measure across from specified point to back pocket edge.
1646; Back Pocket Placement Vertical from__ 1647; Cargo Pocket Placement Horizontal from
Measure down from spepcified point to top of back pocket edge. Measure from specified area across to cargo pocket.
1648; Cargo Pocket Placement Vertical from __ 1649; Cargo Pocket Flap Placement Vertical from__
Measure from specified area to cargo pocket. Measure from the point specified on the GSS to the top edge of the flap.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 108 of 133
How To Measure Manual
1650; Onseam Pocket Placement from__ 1651; Pocket Placement Horizontal from_
Measure from the point specified on GSS to the pocket edge. Measure from the point specified on GSS to the pocket edge.
1652; Pocket Placement Vertical from_ 1653; Welt Pocket Placement Horizontal from_
Measure from the point specified on GSS to the pocket edge. Measure from the point specified on GSS to the pocket edge.
1654; Welt Pocket Placement Vertical from_ 1655; Pocket Placement Vertical from Waist Seam at Center Corner
No Image Available.
Measure from the point specified on GSS to the pocket edge. Measure from waistband seam to top of pocket at center corner.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 109 of 133
How To Measure Manual
1656; Pocket Placement Vertical from Waist Seam at Side 1657; Pocket Placement Vertical from Top Edge
Measure from top edge of waist to top of pocket at center or at corners if pocket is
Measure from waistband seam to top of pocket at side. not parallel to seam.
1658; Pocket Placement Vertical from Waist Seam at Center 1659; Pocket Placement Vertical from Yoke Seam at Center Corner
Measure from yoke seam to top of pocket at center corner. (Measurement is taken
Measure from waistband seam to top of pocket at center of the pocket. from yoke seam, regardless of fell stitching).
1660; Pocket Placement Vertical from Yoke Seam at Center 1661; Pocket Placement Vertical from Yoke Seam at Side
Measure from yoke seam to top of pocket at center of the pocket. (Measurement is Measure from yoke seam to top of pocket at sideseam corner. (Measurement is
taken from yoke seam, regardless of fell stitching). taken from yoke seam, regardless of fell stitching).
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 110 of 133
How To Measure Manual
1662; Pocket Flap Placement Vertical from Top Edge 1663; Pocket Flap Placement Vertical from Waist Seam
Measure from top edge of waist to top of flap. Measure from waistband seam to top of flap.
1664; Cargo Pocket Placement Vertical from Waist 1665; Cargo Pocket Placement Vertical from Bottom
Measure from bottom of waistband or waist seam to pocket edge. Measure from bottom edge of garment to pocket edge.
1666; Front Pocket Placement Horizontal from Center Front Edge 1667; Front Pocket Placement Horizontal from Sideseam at Top
Measure from center front edge to pocket edge. Measure from sideseam to top corner of pocket.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 111 of 133
How To Measure Manual
1668; Front Pocket Placement Horizontal from Sideseam at Bottom 1669; Pocket Flap Placement Horizontal from Sideseam
Measure from sideseam to bottom corner of pocket. Measure from sideseam to flap edge.
1670; Back Pocket Placement Horizontal from Center Back 1671; Back Pocket Placement Horizontal from Side Seam
Measure from center back seam to top edge of pocket. Measure from side seam to pocket edge.
1672; Back Pocket Flap Placement Horizontal from Center Back 1673; Sheet Width
Measure from center back to flap edge. (Refer to HTM guidelines for garments with
fell stitching at center back). Measure across narrow end of sheet from corner seam to corner seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 112 of 133
How To Measure Manual
1674; Sheet Length 1675; Head & Foot Ruffle Bottom Sweep
Measure length of sheet from corner seam to corner seam. Measure bottom edge of ruffle, fully extended, from edge to edge.
Measure bottom edge of ruffle, fully extended, from edge to edge. Count number of individual panels.
Count number of tie sets on bumpers. Measure length from seam/edge to seam/edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 113 of 133
How To Measure Manual
Measure width from seam/edge to seam/edge. Measure total length of bumper from end to end.
Measure from top edge to bottom edge. Measure height from top seam/folded edge to bottom edge.
Measure width across from edge to edge. Measure placket box width from stitch line to stitch line.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 114 of 133
How To Measure Manual
5150; Elbow Position 5151; Under Arm Shield Length Along Armhole
Measure from armhole seam to specified elbow position at a right angle to the
sleeve fold, edge to edge.
5152; Under Arm Shield Height Including Binding 6108; Center Front Neck to Shoulder Seam
Fold garment at center front and line up neck edges. With elastic straightened and
relaxed, measure from center front to shoulder seam.
6109; Center Front Neck to Base of Strap 6110; Center Back Neck to Shoulder Seam
Fold garment at center front and line up neck edges. With elastic straightened and Fold garment at center back and line up neck edges. With elastic straightened and
relaxed, measure from center front to strap/body join. relaxed, measure from center back to shoulder seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 115 of 133
How To Measure Manual
6111; Center Back Neck to Base of Front Strap 6134; Sleeve Cap Width __ Below Top of Cap
Fold garment at center back and line up neck edges, With elastic straightened and At specified sleeve cap position, measure at a right angle to sleeve fold, edge to
relaxed, measure from center back to front strap/body join. edge/seam.
No Image Available.
Measure the distance specified on the GSS from the edge of the specified object to
Measure from Cuff Top Edge to Sleeve Opening Fold Edge the other edge.
At the position specified, measure from edge to edge. If garment has pleats, At the position specified, measure from edge to edge. If garment has pleats,
measure with pleats open (or as specified on GSS). See "general guidelines" for measure with pleats open (or as specified on GSS). See "general guidelines" for
garments with bust darts, shaping, or that are cut on the bias. garments with bust darts, shaping, or that are cut on the bias.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 116 of 133
How To Measure Manual
Measure from edge/seam to edge/seam at top of trapezoid. Measure from edge/seam to edge/seam at bottom of trapezoid.
33759; Trapezoid Height at Center 42073; High Back Position from Center Back
To determine high back position, measure from the center back seam/edge to the
Measure from edge/seam to edge/seam at the center of the trapezoid. distance specified.
59560; Finger Width 70470; Contour Waist at Top Edge - Tape Flat
Line up front and back waist edges so they are even. With tape measure laying flat
on top of garment, measure along the curve at the top edge of the band, from edge
Measure the width of the finger from edge to edge at the center of the finger. to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 117 of 133
How To Measure Manual
70473; Contour Waist at Bottom of Band - Tape Flat 83479; Chest with Bust Darts
At 1" below bottom of the armhole, fold the garment across with the lower portion
Line up front and back waist edges so they are even. With tape measure laying flat of the garment under the top portion. With the measuring tape on its side, measure
on top of waistband, measure along the bottom of the band, from edge to edge from edge to edge encompassing the fullness from the bust darts.
113828; 2" of ____ Elastic/Seam Stretches to ___ 157732; Low Hip 3-Point Measurement Up from Crotch
Locate low hip position up from crotch seam. Measure distance from waist seam to
Stretch specified amount of elastic to maximum amount possible without breaking low hip position. Apply this measurement to the side seams. Measure edge to edge,
stitches or fabric distortion. three point low hip.
Measure at the widest point from edge to edge. Measure thumbhole length from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 118 of 133
How To Measure Manual
262939; Thumbhole Placement from Sleeve Opening 262944; Thumbhole Seam Placement from Sleeve Inseam
Measure from the bottom of the thumbhole edge to the sleeve opening edge. Measure along opening edge from seam to seam.
With garment folded in half with side seams aligned, measure 1" below bottom
of armhole from CF to CB. See "general guidelines" for garments with bust darts,
shaping, or that are cut on the bias. Measured from Hood seam to Highest point of comb.
Measure from widest edge point to point. Measured edge to edge at tallest part of wing.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 119 of 133
How To Measure Manual
306378; Wing Length Along Seam 306381; Wing Width at Widest Point
Measured edge to edge along body seam. Measured from Body seam to furthest edge.
Measured from body seam to mid-curve. Measured along side edge - seam to point.
306392; Fin/Spine Length along Seam 306393; Shoe/Boot Height at Center Back
Measured along body seam - edge to edge. Measured from bottom edge/seam to top edge/seam at center back.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 120 of 133
How To Measure Manual
Measured from bottom edge/seam to top edge/seam at side. Measure along top of foot from seam to toe edge.
Measured along seam at front of foot - side seam to side seam. Measured from body seam to edge of trim.
Measured through diameter of antenna. Measure along eyelid/eye seam, seam to seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 121 of 133
How To Measure Manual
Measure up along back of eyelid, body seam to eyelid seam. Measured from body seam to point edge.
Measured from edge to edge along body seam. Measure from edge to edge at widest point.
Measure from seam to edge. Measure from ankle seam to base of foot edge (not including claw).
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 122 of 133
How To Measure Manual
Measure up along eye curve, seam to edge. Measure along seam, edge to edge.
Measure from seam to edge at longest point. Measure from edge to edge at widest point.
Measure from edge to edge along seam. Measure from seam to top edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 123 of 133
How To Measure Manual
Measure from seam at base, along curves, to edge. Measure from edge to edge.
372866; Distance Between Princess Seams at Hem 373001; Distance Between Princess Seams at Waist
Measure straight between princess seams at hem. Measure straight between princess seams at waist.
373068; Princess Seam from Front Edge at Hem 373082; Princess Seam from Front Edge at Waist
Measure straight from front edge to princess seam at hem. Measure straight from front edge to princess seam at waist.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 124 of 133
How To Measure Manual
373089; Dart Tip Vertical from Shoulder/Neck Seam 373093; Dart Tip Horizontal from Front Edge
Measure vertical from shoulder neck seam to top of dart. Measure straight horizontally from front edge to dart tip.
373096; Dart Position Horizontal from Princess Seam at Hem 373097; Distance Between Darts at Hem
Measure straight horizontally from dart to princess seam at hem. Measure straight between darts at hem.
373098; Distance Between Darts at Waist 373104; Dart Placement Horizontal from Front Edge at Hem
Measure straight between darts at waist. Measure straight horizontally from dart to front edge at waist.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 125 of 133
How To Measure Manual
373105; Dart Placement Horizontal from Front Edge at Waist 374047; Dart Position Horizontal from Princess Seam at Waist
Measure straight horizontally from dart to front edge at waist. Measure straight horizontally from dart to princess seam at waist.
417510; Bodice Height from High Point of Bodice 430550; Armhole Curve - Total
With the measureing tape flat, walk the circumference of the armhole on the body
Measure from front strap/body join to bodice seam. side starting and ending at the side seam.
438830; Armhole Along Curve 496300; Front Waist at Panel Seam - Extended
Align front and back armhole. With measuring tape on its side, measure along front With measuring tape flat, measure along curve of front waist seam with elastic/knit
armhole seam or edge from top to bottom of armhole edge to edge. panel extended, from side seam to center front to opposite side seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 126 of 133
How To Measure Manual
496301; Back Waist at Panel Seam - Extended 584374; Hanger Loop Length
With measuring tape flat, measure along curve of back waist seam with elastic/knit
panel extended, from side seam to center front to opposite side seam. Measure length from edge to edge at inside neck.
Measure from gusset join seam at edge/seam to bottom opening edge or foot seam,
Measure opening from top edge to bottom edge at the center. following the shape of the inseam.
No Image Available.
Measure straight at front bottom opening from outside edge to outside edge with
opening relaxed. Count the number of ___.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 127 of 133
How To Measure Manual
821964; Body Length from High Point of Shoulder - Shirttail 892944; Dart Tip Vertical from High Point Shoulder
Measure from the high point of the shoulder to longest point of the bottom opening
at the imaginary line. Measure vertical from HPS to top of dart.
Fold garment in half matching the side seam to the side seam. Measure down from
the armhole edge/seam, with the side shirring relaxed, to the specified position.
Measure from the armhole to the bottom edge. Measure from the CF to the CB folded edge to edge.
942291; Back Bottom Opening - at Side 942293; Front Bottom Opening - at Side
Fold garment in half matching side seam on side seam. Measure from the folded
edge at the CB to SS - double the measurement for back bottom opening, seam to Fold garment in half matching side seam on side seam. Measure from the folded
seam. edge at CF to SS - double the measurement for front bottom opening, seam to seam.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 128 of 133
How To Measure Manual
942301; Body Length from High Point Shoulder - at Side 954273; Sideseam Placement
Fold the garment in half matching the side seam to the side seam. Extend the body
to lay as smooth as possible. Measure from the high point shoulder to the bottom
edge. Measure from the folded edge of the garment to the seam.
965478; Ear Width at Widest Point 965480; Spike/Horn/Ear Placement Vertical from Edge
Measure from edge to edge at the widest point. Measure from the edge of the garment to the top of the Spike/Horn/Ear.
965482; Distance between the Spike/Horn/Ear. 976118; Patch Placement Vertical from _____.
Measure from the seam/edge at the specified position to the top edge of the patch at
Measure straight across from Spike/Horn/Ear to Spike/Horn/Ear. center.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 129 of 133
How To Measure Manual
With Garment fully extended and opened, measure from edge to edge. Measurement
should not be smaller than the measurement on the measurement chart. Measure from the bottom of the sole to the top.
Measure the side at the highest point to the sole. Measure the height of the shoe mid-distance between the vamp and the back edge.
Measure up 300mm/11 3/4" from the top of the heel, measure across from edge to
edge, times 2. Measure from top of heel to top edge of boot.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 130 of 133
How To Measure Manual
Measure from end to end. Measure from the seam to the edge of the strap.
Measure the length of the insole from the center back to the center front, edge to
On the inside, measure from the base of the insole to the top edge. edge.
1025656; Leg Opening Point to Point - Bodysuit 1150976; Pad Pocket Opening Length
Measure from side seam edge to center of the snap at crotch with the crotch
snapped closed. Measure from inside edge to inside edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 131 of 133
How To Measure Manual
Measure from seam to inside edge of opening at deepest point. Measure from internal end of pick line to the heel.
Measure the length of the toe pick. Measure from toe to beginning of arch support.
1158953; Arch Support Length 1158957; Foot Width ____ From Toe Edge
Measure from edge to edge of arch support. Measure from edge to edge at specified distance from toe point.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 132 of 133
How To Measure Manual
1172287; Front Rise without Seam 1172288; Back Rise to Gusset Seam
Measure from top edge to back gusset seam flat. This measurement includes the Measure from top edge to back gusset seam flat. This measurement includes the
waist band. waist band.
1187669; Ruffle Placement from ___. 1194719; Waist at Bottom of Band - Straight
No Image Available.
Line up front and back waist edges. With tape measure laying flat on top of
Measure from specified point to the top edge of the ruffle. waistband, measure straight along the bottom of the band edge to edge.
1222542; Sock Welt Height 1225604; Ankle Opening Along Top Edge
Measure from top of sock to bottom edge of welt. Measure along top opening from edge to edge.
Generated Date/Time: Jan 4, 2019 1:30:58 PM PST Company Confidential, Gap Inc. Page 133 of 133