Professional Documents
Culture Documents
Master Clock Adjustment
Master Clock Adjustment
Operation Method
4.2 Operation
decrease pushing, , switch and 24/12 switch puts 12 and minute is increment and
: AUTO/MANU switch puts AUTO and 24/12 switch puts 24 and press the switch of
3 or more seconds and the second hand becomes 00. When takes off the switch and
Mode.
- At this Date Setting Mode, UTC Time Display indicates year, LTC Time Display
indicates month and day in order. And date default value is January 1, 2012 (UTC Time
Display : 2012, LTC Time Display : 0101).
- When date value is blinking, you can modify it. The first digit of year is a starting point for
modifying value. And switch is used to increase by 1. Date value will increase
- Blinking position is shifted 1 digit to right by pushing switch. And after completing the
last digit of day value of modifications, you can exit back to Time Display Screen by pushing
- & SWITCH : Changing time and minute of local ootime and UTC time.
MASTER CLOCK CONTROL PANEL
ON ON
ANALOG
ON AUTO 24 SET
(UTC) (TIME)
(LTC) (MIN)
DIMMER OFF MANU 12 TIME
AC DC
First the control panel condition, ANALOG switch is OFF, AUTO/MANU switch is
AUTO, 24/12 switch is 24.
Turns on the power switch and pass the little times(within 30 seconds, GPS activity),
master clock indicates UTC of present time in the left and local time in the right which is
calculated currently location of the vessel. ((Ex.) UTC : 01:30, Local time 10:30 (in Rep. of
Korea 9 hours)
In case of you will want fixing a local time with option, AUTO/MANU switch puts MANU
and 24/12 switch puts 24 and time is increment and decrease pushing , switch
and 24/12 switch puts 12 and minute is increment and decrease pushing , switch.
Press the , switch above 1 second it is increases and decrease at the case 10 units.
If you want to indicate A.M and P.M in local time display, puts the 12 direction 24/12
switch. Automatically AM, PM indicates and in case UTC is 24 hours.
After master clock was setting, digital slave clock come to fix local time of master clock
exactly within 30 seconds.
Operation method of analog slave clock (First installation)
- Master clock is normal operation status and display currently UTC.
- When currently all of the analog slave clocks coming to fix in 12:00:00, AUTO/MANU key
of the master clock lets with MANU direction and fixes the 11:59:xx operating ,
switch.
- At the moment 12:00:00 local clock, ANALOG switch puts the ON.
- Analog slave clock operates.
- When AUTO/MANU key of the master clock lets with AUTO direction, change the digital
local time and also adjusting analog slave clock automatically.
Operation method of exchange slave clock
- When the digital slave clock breakdown, separates wiring and exchange new digital slave
clock, it is rightly indicated.
- Be careful wiring power and signal line of digital slave clock.
- In case of operation method of exchange the breakdown analog slave clock, ANALOG
switch puts the OFF specified time. (Example: specified time 10:35:00 analog slave clock
stopped, digital slave clock keep up activity)
- Removed the breakdown analog slave clock, and installs new analog slave clock after
setting 10:35:00. (All of the analog slave clock indicates 10:35:00) - AUTO/MANU key of
the master clock lets with MANU direction, setting local time 10:34:xx by pushing ,
switch.
- When local time display of master clock indicates 10:35:00, puts the ANALOG switch is
ON and then all of analog & digital slave clock is settled.
- In order to fix the practice local time, AUTO/MANU key of the master clock lets with
AUTO direction or doing manual operation push the , switch MANU direction.