Professional Documents
Culture Documents
D-Line Door Hardware
D-Line Door Hardware
PRODUCT SPECIFICATION
Dimensions: W:49 mm x H:50 mm x D:22 mm.
Material: stainless steel AISI 316
Surfase finish: satin finish, crafted by hand
Warranty for stainless steel (non movable ) parts - 20 years
MOUNTING:
See instruction supplied with the product
PACKING:
1 pcs in a bag
ISO-DRAWING
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning
316. To sustain the unique d line finish appearance please follow the below products as these may damage the surface.
instructions: If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities
● Wash down the surfaces using soapy water or mild detergent in the environment, aggressive conditions or improper or insufficient cleaning.
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
PRODUCT SPECIFICATION
Dimensions: W:40 mm x H:40 mm x D:40 mm.
Radius:Ø14
Material: stainless steel AISI 316
Surfase finish: satin grain 320, crafted by hand
Warranty for stainless steel (non movable ) parts - 20 years
MOUNTING:
See instruction supplied with the product
PACKING:
1pcs in a bag
ISO-DRAWING
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning
316. To sustain the unique d line finish appearance please follow the below products as these may damage the surface.
instructions: If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities
● Wash down the surfaces using soapy water or mild detergent in the environment, aggressive conditions or improper or insufficient cleaning.
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
PRODUCT SPECIFICATION
Dimensions: W:24 mm x H:235 mm x D:88 mm.
Backset: 60 mm.
Centers: 78 mm.
Suitable for sprung and most unsprung lever furniture
Material: stainless steel AISI 316
Surfase finish: satin grain 320, crafted by hand
Warranty for stainless steel (non movable ) parts - 20 years
MOUNTING:
See instruction supplied with the product
PACKING:
1pcs per box
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning
316. To sustain the unique d line finish appearance please follow the below products as these may damage the surface.
instructions: If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities
● Wash down the surfaces using soapy water or mild detergent in the environment, aggressive conditions or improper or insufficient cleaning.
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
PRODUCT SPECIFICATION
Dimensions: W:24 mm x H:235 mm x D:88 mm.
Backset: 60 mm.
Suitable for sprung and most unsprung lever furniture
Material: stainless steel AISI 316
Surfase finish: satin grain 320, crafted by hand
Warranty for stainless steel (non movable ) parts - 20 years
MOUNTING:
See instruction supplied with the product
PACKING:
1pcs per box
PRODUCT CARE
d line products are produced in the highest quality stainless steel, marine grade, AISI Please do not use scouring powder, steel wool, chloride based detergents or other aggressive cleaning
316. To sustain the unique d line finish appearance please follow the below products as these may damage the surface.
instructions: If spots or corrosion appear on the surface it is not due to the stainless steel quality, but to impurities
● Wash down the surfaces using soapy water or mild detergent in the environment, aggressive conditions or improper or insufficient cleaning.
● Always thoroughly rinse off with clean water
● To complete the cleaning procedure dry/polish the surfaces with a soft dry cloth
Additional Information
Standard load: Maximum door weight 120 kg (per pair)
Application: Concealed hinge for non-rebated doors,
hinge leaves are mortised into frame and
door; 3-dimensional adjustability,
maintenance-free bearings; magnetically
fixed cover plates for optics
free-of-screws
Accessories: PIVOTA ® DX safety plate for frame part, Section drawing
retainer for casing or steel frames
Note: incl. fixing screws
Certified according to
Page: DX.100b Stand/Date: 01.01.2019 www.basys.biz Tel: +49-(0)5264/6473-0 Bartels Systembeschläge GmbH
Copyright 1995 - 2019 vertrieb@basys.biz Fax +49-(0)5264/6473-30 Gewerbegebiet Echternhagen 2
32689 Kalletal
EL560 in custom
bronze plated finish.
ABLOY® EL560, EL561, EL562, EL563
High security DIN standard handle controlled lock
for wooden and metal doors
Product description
High security locks EL560/561/562/563 are used especially in situations where the
advantages of handle-controlled unlocking have to be combined with the mechanical
security requirements. The integrated monitoring contacts from the lock can be connected to
the different systems.
When door closes, dead bolt is thrown out automatically, double action latch is blocked and
the lock case is secured in two points.
The exit side settings (EL560/562) and selecting between fail-locked and fail-unlocked can
be performed on the lock as required.
Overview of Advantages
• Mechanical automatic locking system
• Non handed, left / right
• Exit side can be changed over *
• Can be changed between fail-unlocked & fail-locked
• Burglary-resistant due to dead bolt with 20 mm throw
• Exit function by inside handle *
• Suitable for fire doors
• Controllable outside handle *
• Mechanical override with cylinder
• Monitoring functions
• Door status
• Handle down
• Bolt deadlocked
• Bolt in
• Key cylinder used
• Sabotage loop * EL560/EL562
Scope of delivery
• 1 pcs lock case
• Operating manual
Ordered separately
• Strike plate (e.g. EA324)
33
• Cable EA218 (6m) / EA219 (10m)
13 / 1 • Lead cover EA280/281
3/ 98 / 1 • Handle set (e.g. EH006/042) and spindle
88 / 9 • Split spindle EA288/289 with EL560/562
/
0 / 65 16.5 • Cylinder(s) (e.g. CY321T)
55 / 6100
80 /
57
Technical data
66.5
R7
10 Handing Non-handed, left/right
63
168.5
72 (PZ) * / 74 (RZ) **
20 6x2
15
EN14846:2008 3S8D-L611
EN179:2008 376B1342AB (EL560/562)
6x2 EN1125:2008 376B1321AB (EL560/562)
20 / 2 38
4
3
35
We reserve the right to make alterations to the products described in this leaflet.
* EL560/561
** EL562/563