Professional Documents
Culture Documents
Salto Door Sensors
Salto Door Sensors
Salto Door Sensors
www.saltosystems.com
TECHNICAL SPECIFICATIONS:
PANEL READER
Publications of SALTO SYSTEMS S.L. are protected by copyright and all rights are reserved.
SALTO SYSTEMS publications may not be reproduced in any form or by any means without written permission from the copyright owner.
www.saltosystems.com SALTO SYSTEMS I Electronic Locking Solutions
(3/16")
IP class: IP66
(1-5/8")
4
Certifications: CE, FCC/IC, RCM, MIC, UL294
41
ELECTRONIC FEATURES:
SALTO KS:
Cable type and distances:
SALTO KS: •
Reader
UTP Cat5e 2 pairs
100m
SALTO SALLIS: AWG24
UTP Cat5e 4 pairs
SALLIS: — AWG24 + 320m
SP224861/SP224895
Twisted pairs AWG18 475m
COVER STICKER FINISHES:
Silver: •
White: •
//DATASHEET
Publications of SALTO SYSTEMS S.L. are protected by copyright and all rights are reserved.
SALTO SYSTEMS publications may not be reproduced in any form or by any means without written permission from the copyright owner.
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
SALTO’s latest Control Unit makes it even easier to bring superior access control to your facility thanks to the ability to
control and manage multiple doors through one Ethernet connection and one IP address.
This means that extending SALTO access control benefits to all those doors where a stand-alone electronic
escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more cost-effective.
Model:
GND
A
CU42E0 +
B
BUS485
B A
121
131
+
READER 2 -
- TAMPER +
+ NC
- IN1
RL1 C
Power Input: 12VDC-1A
+ NO
- IN2
12VDC Input ON B NC
GND + RL2 A C
IN3
- READER 1 NO
12VDC Output (1A)+
-
NC
GND - IN4 +
RL3 C
A + B NO
BUS485 - IN5 NC
B A
121
131
+
+ READER 2 RL4 - C
IN6
- TAMPER - + NO
Ethernet
10Base-T
+ 100Base-TX NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6
104 NO
MAIN FEATURES:
Ethernet
80
10Base-T
100Base-TX
43,3
44
doors or one door reader in and reader out locking. • Virtual network capable through SALTO Virtual Network technology.
• Antipass-back mode available by connecting 2 wall readers and set 104
• All communications between the carrier and the wall reader are
Power Input: 12VDC-1A
80 2.
12VDC Input ON B
• 4 relay outputs. 44length between the door controller and the wall
A B
131
+
READER 2 -
- TAMPER +
INSTALLATION:BUS485
+
GND
A B
B A
121
131
+
READER 2 -
- TAMPER +
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
MECHANICAL ASPECTS: +
- IN3
RL2 C
NO
12Vdc Input
12VDC Input ON B
GND A
READER 1
12VDC Output (1A)
-
CERTIFICATIONS: BUS485
+
GND
A B
BUS485
B A
Tamper input
READER 2
• CE comform +
-
- TAMPER +
• UL 294
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
Model: CU42E0
+ NC
- IN1
RL1 C
Power Input: 12VDC-1A
+ NO
- IN2 12VDC Input ON NC B
GND A
+ RL2 READER
C 1
IN3 12VDC Output (1A)
-
- GND NO
+
+ A NC B
IN4 BUS485
- B A
+
RL3 C 2
READER -
+ - TAMPER NO +
- IN5 NC
+ NC
+ RL4 C
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
SALTO’s latest Control Unit makes it even easier to bring superior access control to your facility thanks to the ability to
control and manage multiple doors through one Ethernet connection and one IP address.
This means that extending SALTO access control benefits to all those doors where a stand-alone electronic
escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more cost-effective.
With the new XS4 2.0 Controller Online with Housing it is easier to install and it enhanced the aesthetic and
sturdiness.
180(7-1/8") 56 (2-1/4")
CU42E0x
CU42E0T CU42E0G
Model: CU42E0
+ NC
- IN1
RL1 C
240(9-1/2")
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
Ethernet
10Base-T
100Base-TX
MAIN FEATURES:
• 2 different tampers:
GND A
READER 1
+ NC
- IN1
RL1 C
1 2 3 4
Model: CU42E0
+ NC
- IN1 C
RL1
+ NO
- IN2 NC
+ RL2 C
- IN3 NO
+ NC
IN4 C
- RL3
+ NO
- IN5 NC
+
+ RL4 C
C
-- IN6 NO
NO
Ethernet
Ethernet
10Base-T
10Base-T
100Base-TX
100Base-TX
XS4 2.0 CONTROLLER - ONLINE DOOR CONTROLLER SETUP: Door A (in & out)
Door 1 Door 2
ONLINE CONTROLLER (CU42E0):
• Connection with the server via Ethernet 100BASE-TX or 10Base-T.
• Requires one IP address.
• Initialization via Ethernet online connection.
• Set up through SALTO ProAccess SPACE software. Model: CU42E0
• Set up:
• As One door (reader in & reader out). Power Input: 12VDC-1A
12VDC Input ON B
• Two doors (reader one - door one, reader two - door two).
GND A
READER 1
12VDC Output (1A)
-
+
GND
A B
BUS485
10Base-T
100Base-TX
Door 3 Door 4
• Set up:
B A
+
READER 2 -
- TAMPER +
• Two doors (reader one - door one, reader two - door two).
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
Model: CU4200
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
IN6
Door 7 Door 8
Model: CU4200
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
IN6
Door 9 Door 10
Model: CU4200
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
Model: CU42E0
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
104
80 43,3
44
104
SALTO XS4 2.0 80 43,3
AUXILIAR OR OFFLINE CONTROLLER Model: CU42E044
SALTO’s latest Control Unit makes it even easier to bring superior access control to your facility thanks to the ability to
GND A
READER 1
12VDC Output (1A)
-
+
GND
control and manage multiple doors through one Ethernet connection and one IP address.
A B
BUS485
B A
121
131
Power Input: 12VDC-1A
+
READER 2 -
TAMPER 12V DC Input ON B
- GND A
+
READER 1
12VDC Output (1A)
-
+
GND
+ NC
- IN1 A
BUS485
B
B RL1 C A
121
131
The New SALTO XS4 2.0 Controller CU4200 is an auxiliar controller that do not requires an IP address and can be set
+ +
READER
NO 2
-
- IN2 - TAMPER
NC
+
+ RL2 C
IN3 + NC
up as an auxiliar controller connected to an XS4 online controller (CU42E0) or can work as offline controller reducing
- IN1
- RL1 NO C
+ + NC NO
- IN4 - IN2 NC
RL3 C
+
+ RL2 C
the costs of installation keeping all the advantages of the SALTO Data-on-card technology.
IN3 NO
- IN5 - NC
NO
+ NC
IN4
+ - RL4 RL3 C C
- IN6 + NO NO
- IN5 NC
Ethernet+ RL4 C
10Base-T- IN6 NO
100Base-TX
Ethernet
10Base-T
100Base-TX
Model: CU4200
Model: CU4200
Power Input: 12VDC-1A
12VDC Input ON B
GND A
READER 1
12VDC Output (1A)
-
+
GND
A B
Power Input: 12VDC-1A BUS485
B A
121
131
+
READER 2 -
12VDC Input - ON TAMPER B +
GND A
READER 1
12VDC Output (1A)+
-
NC
- IN1
RL1 C
+
GND
+ NO
A IN2 B
BUS485 - NC
B A
121
131
+
+
- IN3 READER 2 RL2 - C
NO
- TAMPER +
+
NC
- IN4
RL3 C
+ NO
+ IN5 NC
- IN1 - NC
+ RL1 RL4
C C
+ - IN6 NO NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
MAIN FEATURES:
• Antipass-back mode available by connecting 2 wall readers and set • All communications between the carrier and the wall reader are
up as one door. encrypted and secure4. Power Input: 12VDC-1A
12VDC Input ON B
• 4 relay outputs.
GND A
• The maximum cable length between the door controller and the wall
12VDC Output (1A)
READER 1 -
+
GND
• Door detector, request to exit switch (RTE), office switch. • Connection to the wall reader using 4 wire connection, twisted pair.
+
- IN1
RL1
NC
C
Model: CU42E0
• 2 different tampers: +
by an adaptor.
+ NC
- IN4
RL3 C
+
• Door monitoring and tamper monitoring via contacts input (intrusion GND
12VDC Output (1A)
Ethernet
10Base-T
100Base-TX
READER 1
A
-
+
GND
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
MECHANICAL ASPECTS: +
- IN4
RL3
NC
C
+ NO
• Dimensions: 104mm x 131mm x 43,3mm (W x H x D). -
+
IN5
RL4
NC
C
IN6
• Weight: 0.5kg.
- NO
Ethernet
10Base-T
Model: CU4200
100Base-TX
12Vdc Input
ON
GND A
READER 1
12VDC Output (1A)
-
+
GND
CERTIFICATIONS: BUS485 A
B
BUS485
READER 2
B
A
Tamper input
+
-
TAMPER
• CE comform
-
+
+ NC
- IN1
RL1 C
• UL 294 +
-
+
IN2
RL2
NO
NC
Inputs
C
• FCC certified
IN3
Relay outputs
- NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
Model: CU4200
+
- IN1
RL1
3
NC
C Not available yet.
+ NO
-
+
IN2
RL2
5
Depending on the card and the
NC
C
RFID technology
IN3
-
+
IN4
5
Depending on the cable.
NO
NC
- RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
180(7-1/8") 56 (2-1/4")
SALTO’s latest Control Unit makes it even easier to bring superior access control to your facility thanks to the ability to
GND A
READER 1
12VDC Output (1A)
-
+
GND
A B
BUS485
B A
+
READER 2 -
control and manage multiple doors through one Ethernet connection and one IP address.
- TAMPER +
+ NC
- IN1
RL1 C
240(9-1/2")
+ NO
IN2
The New SALTO XS4 2.0 Controller CU4200 is an auxiliar controller that do not requires an IP address and can be set
- NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
up as an auxiliar controller connected to an XS4 online controller (CU42E0) or can work as offline controller reducing
- IN5 NC
+ RL4 C
- IN6 NO
Ethernet
10Base-T
the costs of installation keeping all the advantages of the SALTO Data-on-card technology.
100Base-TX
With the new XS4 2.0 Auxiliar Controller with Housing it is easier to install and it enhanced the aesthetic and
sturdiness.
180(7-1/8") 56 (2-1/4")
CU4200x
CU4200T CU4200G
Model: CU4200
+ NC
- IN1
RL1 C
240(9-1/2")
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
MAIN FEATURES:
1 2 3 4
Model: CU42E0
+ NC
- IN1 C
RL1
+ NO
- IN2 NC
+ RL2 C
- IN3 NO
+ NC
IN4 C
- RL3
+ NO
- IN5 NC
+
+ RL4 C
C
-- IN6 NO
NO
Ethernet
Ethernet
10Base-T
10Base-T
100Base-TX
100Base-TX
www.saltosystems.com
B A
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
IN6
100BASE-TX -
user access plan and blacklist (list of users card cancelled) is transmited
+ NC
- IN1
RL1 C
+ NO
- IN2 NC
R&W
SVN
Maximum number of users per door 4,000,000
Model SP224895
Connecting circuit adaptor for RJ45 cable for WRDBxxx
series.
Datasheet-XS4CU42xx_ENG_09_15
SALTO Systems reserves the right to modify technical specifications, designs and performance without notice. © SALTO SYSTEMS 2015
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
104
80 43,3
44
The new input / output expansion unit - CU4EB8 - is a device which, when connected to CU4200 door controllers,
GND A
READER 1
12VDC Output (1A)
-
80 43,3
+
GND
provides the option to manage multi relay switchable output systems such as elevator
44 floor level access, multi shutter
A B
BUS485
B A
121
131
+
READER 2 -
- TAMPER +
alarms or even logical actions through the SALTO ProAccess SPACE software.
NO
- IN5 NC
Power Input: 12VDC-1A
+ RL4 C
- IN6 12VDC Input ON NO B
GND A
READER 1
12VDC Output (1A)
-
Ethernet
+
10Base-T GND
100Base-TX A B
BUS485
B A
121
131
+
READER 2 -
- TAMPER +
+ NC
- IN1
RL1 C
+ NO
IN2
104
- IN6 NO
Ethernet
10Base-T
100Base-TX
80 43,3
CU4EB8 44
104
Model: CU4EB8 80 43,3
44
Power Input: 12VDC - 500mA
12VDC Input +
ON IN1
GND -
12VDC Output (1A)
GND
IN2
Model: CU4EB8+-
A +
BUS485 IN3 -
B
121
131
+ +
- TAMPER IN4 -
Power Input: 12VDC - 500mA
12VDC Input +
NO ON IN1
NC
GND -
C RL1 RL5
12VDC Output (1A) C
IN2
+
GND NO -
NC
A +
NO BUS485 NC
IN3
B -
121
131
C RL2 + RL6 C +
NC - TAMPER IN4
NO -
NO NC
NO NC
C RL3 C RL1
RL7 C
RL5 C
NC NC NO NO
NO NO NC NC
C RL4 C RL2 RL8 RL6
C C
NC NO NO
NC
NO NC
C RL3 RL7 C
MAIN FEATURES:
NC NO
NO NC
C RL4 RL8 C
NC NO
A B
BUS485 + NC
B IN1 A
+
- READER 2 RL1
- C
+ NO
- TAMPER - IN2 +
NC
+ RL2 C
IN6 RL2
+ + RL4
C C
IN3
• 8 relay outputs.
- NO
- NO
+ NC
- IN4
RL3 C
- 1 tamper input
- 1 tamper switch.
Model: CU4EB8
• The maximum cable length between the first and the last expansion unit
on the RS485 BUS is 300 meters. Power Input: 12VDC-500mA
• Connection to the controller using 4 wire connection, twisted pair 12Vdc Input
12VDC Input
GND
12VDC Output (1A)
ON IN1
+
-
+
IN2
(AWG24). Inputs
GND -
BUS485 Model:
A
B
CU4EB8BUS485 IN3
+
-
Tamper input
+ +
NO
TAMPER IN4 -
NC
CERTIFICATIONS:
B NC NO
+ +
- TAMPER IN4 -
• CE comform NO
RL5
NC
C
C RL1
NC NO
NO NC
C RL2 RL6 C
NC NO
NO NC
C RL3 RL7 C
NC NO
NO NC
C RL4 RL8 C
NC NO
www.saltosystems.com SALTO SYSTEMS I Wire-free Networked Electronic Locking Solutions
180(7-1/8") 56 (2-1/4")
The new input / output expansion unit - CU4EB8 - is a device which, when connected to CU4200 door controllers,
+ +
- TAMPER IN4 -
NO NC
C RL1 RL5 C
provides the option to manage multi relay switchable output systems such as elevator floor level access, multi shutter
240(9-1/2")
NC NO
NO NC
C RL2 RL6 C
NC NO
NO NC
C RL3 RL7 C
When connected to an online device this expansion board permits to trigger alarms through the inputs and generate
alarms or even logical actions through the SALTO ProAccess SPACE software.
With the new XS4 2.0 Input / output expansion unit with Housing it is easier to install and it enhanced the aesthetic
and sturdiness.
CU4EB8x
CU4EB8T CU4EB8G Model: CU4200
+ NC
- IN1
RL1 C
240(9-1/2")
+ NO
- IN2 NC
+ RL2 C
- IN3
NO
+ NC
- IN4
RL3 C
+ NO
- IN5 NC
+ RL4 C
- IN6 NO
MAIN FEATURES:
INSTALLATION:
1 2 3 4
Model: CU42E0
+ NC
- IN1 C
RL1
+ NO
- IN2 NC
+ RL2 C
IN3
- NO
+ NC
- IN4 C
RL3
+ NO
CU4EB8
- IN5 NC
+
-- IN6
RL4 C
NO
NO
Model:
Ethernet
Ethernet
10Base-T
10Base-T
100Base-TX
100Base-TX
NO NC
C RL1 RL5 C
NC NO
NO NC
C RL2 RL6 C
NC NO
NO NC
C RL3 RL7 C
NC NO
NO NC
C RL4 RL8 C
NC NO