Professional Documents
Culture Documents
Machines MCQ
Machines MCQ
a) Reluctance motor
b) Capacitor start motor
c) Capacitor run motor
d) all the above
a) A.C only
b) D.C. only
c) either A.C. or D.C.
d) none of the above
6-Which of the following motor will give relatively high starting torque ?
a) shunt motor
b) series motor
c) compound motor
d) separately excited motor
1
8-To reverse the direction of rotation of a capacitor-start motor while it is running we should ?
a) disconnect motor from the supply till it stops then reconnect it to supply with reversed
connection of main or auxiliary winding
b) disconnect motor from supply and immediately reconnect it to supply with reversed connections
of the main winding
c) reverse the direction of connection of the auxiliary winding and after motor comes to rest then
connect auxiliary winding to the supply
d) reverse the direction of connections of the auxiliary winding and immediately connect it to
supply
9-For the same rating which of the following motors has the highest starting torque ?
a) Synchronous motor
b) Universal motor
c) Split-phase motor
d) All have identical starting torque
10-A centrifugal switch is used to disconnect starting winding when motor has ?
12-Which of the following motors can be run on AC. as well as D.C. supply ?
a) Universal motor
b) Repulsion motor
c) Synchronous motor
d) Reluctance motor
13-If starting winding of a single-phase induction motor is left in the circuit, it will ?
a) run faster
b) spark at light loads
c) draw excessive current and overheat
d) run slower
2
14-In a split-phase motor the ratio of number of turns for starting winding to that for running winding is?
a) toys
b) hair dryers
c) circulators
d) any of the above
16-Which of the following motor will have relatively higher power factor ?
17-A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by
an inductor of equivalent reactance value. It will ?
a) Repulsion motor
b) Reluctance motor
c) Hysteresis motor
d) Universal motor
a) lagging
b) always leading
c) unity
d) unity to 0.8 leading
20-Hysteresis motor is particularly useful for high-quality record players and tape-recorders because ?
a) it revolves synchronously
b) it is not subject to any magnetic or mechanical vibrations
c) it can be easily manufactured in extremely small sizes of upto 1 W output
d) it develops hysteresis torque which is extremely steady both in amplitude and phase
3
21-In case of a reluctance motor, when the load is increased so that it cannot maintain synchronous
speed the motor will ?
a) become unstable
b) draw excessive armature current and may burn out
c) fall out of synchronism and come to stand still
d) Run as induction motor
a) retentivity
b) resistivity
c) susceptibility
d) none of the above
24-Which of the following single-phase motors is suitable for timing and control purposes ?
a) Reluctance motor
b) Series motor
c) Repulsion motor
d) Universal motor
4
28-The rotor of a hysteresis motor is made of ?
a) aluminium
b) cast iron
c) chrome steel
d) copper
a) (1 − 𝑠) (𝑃𝑔𝑓 + 𝑃𝑔𝑏 )
b) (1 + 𝑠) (𝑃𝑔𝑓 − 𝑃𝑔𝑏 )
c) (1 + 𝑠) (𝑃𝑔𝑓 + 𝑃𝑔𝑏 )
d) (1 − 𝑠) (𝑃𝑔𝑓 − 𝑃𝑔𝑏 )
30-In single-phase induction motors