Professional Documents
Culture Documents
IGA EGP Report
IGA EGP Report
Report Summary :
Testing performed as per ASTM F2111 & Work instruction IMS-QAD-TP-116, sample evaluated at 100x-500x magnification and found
acceptable. End grain pitting and Intergranular attack none observed.
Test Method : ASTM F2111 & ASTM E3 Test condition : As polished condition
Note : (*) Pit definition: A depression or cavity with a width to depth ratio of < 6 to 1
Image 1 : Image showing Long Transverse (LT) location-1 of part at 500X magnification.
Image 2 : Image showing Long Transverse (LT) location-2 of part at 500X magnification.
Image 3 : Image showing Short Transverse (ST) location of part at 500X magnification.