Professional Documents
Culture Documents
하이오스 카다록
하이오스 카다록
하이오스 카다록
00A
Beginning and a Never Ending Journey
For more than a quarter of a century after Totsu Screw was introduced, they are still used for watches and toys.
From the very start of the company, Hios has been concerned not only with screws and screwdrivers but also
a mechanical fastening system and method. Hios has dedicated a whole company history to the development
of perfect mechanical fasteners and the most sophisticated and
gentle tools for every operator. Therefore our main products are
low voltage screw drivers being safe to operate and easy to
maintain.
At one time the industry was dominated by manual drivers and pneu-
matic drivers to offer.
As pneumatic drivers were thought long life and highly effective
products, because of their robust housing and high rotation speed,
they were accepted as a standard option and electric drivers were
only for the limited use.
However, after the plastic housing became popular in the electric
and electronics industry, the first electric screw driver of Hios, Type
M, occupied the market step by step, even with slow rotation speed
and no clutch mechanism. Type M became a first epoch making
screw driver of Hios. The Victory of Hios' Type M screw driver against
pneumatic was achieved by several advantages, such as no oil mist
Plane Touch System
exhaust, stable rotation speed and reduced damage to plastic
material.
Hios developed an unique and ideal clutch mechanism, Plane Touch System, for electric drivers and it was
used for the first CL-Drivers, released in 1977. CL-Driver was a progressed screw driver of Type M and had the
capability of accurate tightening torque and higher rotation speed than Type M. The mechanism of the clutch
system, "Plane Touch", is simple but effective. An inner gear case of planet gear is
automatically released when the rated torque is transported through bit axis to planet
gear. Also the exact and precise torque adjustment is possible very easily. CL-Driver
is driven by the voltage of less than 30 V DC and is made up of three blocks, Switch
assy., Motor assy. and Gear assy. It means CL-Driver is not only very safe but also an
easy-maintenance product.
With these two advantages, the exact and precise torque adjustment and easy main-
tenance, CL-Drivers were widely accepted by many customers, especially by many
operators of factories. CL-Driver became a successful product of Hios.
1
In parallel with the rise of demand for small and precision screws, the industry market needed an exact mea-
surement and control of tightening and loosening torque of screw drivers. In 1978, Hios developed Model H, a
first digital torque tester, which could measure exact tightening torque. It is more difficult to measure loosening
torque than tightening torque, because a momentary torque should be sensed at the measurement of loosen-
ing torque. However, Hios offers an excellent torque tester which can measure both tightening and loosening
torque. The latest torque meters of Hios realises a real-time indication of measured torque by advanced sensing
technologies. Hios's torque meters now play a very important role in a critical quality control of assembly (e.g.
ISO 9000s).
Nowadays Hios concentrates on development of the fourth products generation. Following are some of the
superstars which will be released in the near future:
Low particle and low electric noise screw driver (Type CR)
In a clean room, particles and electric noise are always a concern of quality. With the low particle and low
noise electric screw drivers, it is easily realised to a decrease quality problem and also to increase throughput
of the production line in the clean room.
Compared with high-technology companies, Hios seems to be an old fashioned company always concentrating
only on one development. But Hios is also committed to constant innovation in its field. Continuous concentra-
tion and contribution on "one target and one development" requires an extensive and deep knowledge not only
on electric drivers and screws but also on a general machinery and assemble technology.
It is the way Hios is and must be. We take pleasure in the never ending effort of developing ideal screws and
operator oriented tools accompanied with customers to achieve the highest products standards.
2
History of Hios Products
1996
• Shock absorbing screwdriver (SS series) goes on sale.
• Developed Top Totsupra screw.
--
1993
• Torque meter (HM, HMP series) goes on sale.
• Auto-feeding screwdriver (Recipro III series) goes on sale.
1992
• Torque display screwdriver (ATM, ATMA series) goes on sale.
• Transformerless screwdriver (VZ series) goes on sale.
• Torque meter (HP and HDP) series goes on sale. • Universal model
-
Robot assembly drivers Rotary Robot (HR 400 series) goes on sale.
• Auto-feeding screwdriver (Recipro series) goes on sale.
1990
1989 • Automatic screw feeder Neji-Taro (NT series) goes on sale.
1988
• R-102 mini-grinder goes on sale. • HN-10 electric nipper goes on sale.
• Transformerless screwdriver (ACL type) goes on sale. • VMS-40 screwdriver stand goes on sale.
1987
•Torque control (DCD series) for automated operations goes on sale.
• F-9800 rechargeable screwdriver goes on sale.
1986
• Push-to-start electric screwdriver (CL series) goes on sale.
-
1983
• DR-486 rechargeable riveter goes on sale.
• F-9001 rechargeable screwdriver goes on sale.
• CG-II rechargeable caulking gun goes on sale.
1982
• CL-2000 clutch-equipped screwdriver goes on sale.
• W-07 rechargeable ratchet wrench goes on sale.
1981
• DL-20 rechargeable screwdriver goes on sale.
-
1973 • M-4000 and M-5000 electric screwdrivers goes on sale.
3
Comparison Table CL • α type and VZ type
Exchange of
the carbon Easy Easy
Brushes
Conversion
from the
normal type Easy Easy
to the suction
type
4
■ The Hios Family of Products
CL-9000 CLT-75
VZ-1820 VZ-1820PS
120V VZ-3012 VZ-3012PS VZQ-1820
VZ-4506 VZ-4506PS VZQ-3012
VZ-Series (Standard type) ● How to order Hios tools ● Output torque graphs
VZ-1812 VZ-1812PS
220V VZ-3007 VZ-3007PS VZQ-1812 This catalog provides tables with the neces- Output torque graphs for each type of driver
Transformerless VZ-4504 VZ-4504PS VZQ-3007
Manual sary information for ordering all tools, with the are given for each model series. The x-axes
Screwdriver
exception of clean room drivers. To order the of these graphs are the numbers 1-6, corre-
ACL-Series (Mini type) ACL-10 ACL-10PS
latter, please contact Hios Inc. or your local sponding to the drivers' torque settings. The
P.23
Hios agent. y-axes show the output torque equivalents of
Rechargeable F-Series F-9000, F-9000S, F-9001
Manual F-9500, F-9800, F-9900 these settings in units of [kgf.cm]. Please note
Screwdriver
that these are only approximate values.
SB-400C Exclusive Power Pack * The torque settings on CL, α, VZ and ACL series
P.24 Electric Type SBT-50 drivers signify different output torque values.
SB-650C ● Bit Shank
Electric Tool Handy Tapper
There are two types of bit receptacles for
Rechargeable Type SB-900F screwdrivers: for standard hexagonal bit
shank and for the Hios bit shank, as indicated
For testing HP-Series
HP-10
torque of drivers HP-100 in the specification lists. Illustrations of both
■ Approximate Guidance of Output
shanks are shown below.
HDP-5 Torque
HDP-Series HDP-50
P.25-P.26 HDP-100* N• m Color of spring
For testing torque Hexagonal shank:
of installed screws HDM-5
Torque Meter HDM-Series HDM-50
HDM-100* * Option
5
6.3
For automatic HM-Series HM-10 9.0
drivers HM-100 Hios shank:
Torque Scale*
Electric Screwdrivers CL Series (Mini Type)
Low-torque drivers especially designed for stable tight-
ening of very small fasteners.
■ Push-to-Start Type
CLT-50
CL-3000PS (Attachment PS-2)
CL-4000PS (Attachment PS-1)
* Push-to-start drivers : equipped with “PS” adaptor kits
(see P.21).
CLT-20
CL-2000 CL-3000 CL-4000 ■ Approximate Guidance of Output Torque
(Power source Spec. page 13,14) N•m CL-2000 CL-3000 CL-4000
■ Specifications 0.25 0.9
0.8
Bl 0.3
0.2
Model CL-2000 CL-3000 CL-4000 0.7
0.25
0.6 R
Output Torque N•m 0.02 - 0.2 0.03 - 0.2 0.1 - 0.54 0.15 B
0.2 0.5
Range lbf•in 0.17 - 1.7 0.3 - 1.7 0.9 - 4.8 Y 0.15 0.4
0.1
B
(kgf•cm) 0.2 - 2 0.3 - 2 1 - 5.5 0.1
G 0.3
0.2
0.05
Torque Switching Stepless Adjustment 0.03 0.05
0.1
1
0.02
Unloaded Rotation HI 680* 1000 1000
1 2 3 4 5 6 7 8 1 2 3 4 5 6 1 2 3 4 5 6
Speed (r.p.m) LOW 490 670 690 Torque Scale
*Color of Spring
Screw Size Small Size Screw 1.0 - 2.3 1.0 - 2.0 1.4 - 2.6 B: Blue ∅1.2 Bl: Black ∅1.2
(mm) Tapping Screw 1.0 - 2.0 1.0 - 1.7 1.4 - 2.3 G: Gold ∅1.0 Y: Yellow ∅1.0
R: Red ∅1.5
Bit Type Hios H4 Hios H4 or 1/4 Hexagonal
*2Weight (g) 210 350 (390) 380 (430)
3
* Power Pack CLT-20 ○ ■ Order Code No.
CLT-50 ○ ○ ○ Model Code No. Bit Shank
CLT-65 ○ ○ ○ CL-2000 CL-2000 H4
CLT-100 ○ ○ ○ CL-3000E H4
CL-3000
CL-3000NL H4
MC-70L ○ ○ ○ CL-4000E H4
*1: The data given in the specifications for models CLT-20 and CLT-50 is for high speed measurement CL-4000X 1/4 HEX
680 r.p.m. Model CLT-20 gives high speed output only. The low speed data is for Model CLT-50. CL-4000
CL-4000NL H4
*2: Numeric data in ( ) is weight of push-to-start driver. CL-4000NLX 1/4 HEX
* : Circles ( ○ ) indicate that the power packs can be used with the respective tools.
3
CL-3000PS H4
CL-3000PS
CL-3000PSNL H4
■ External Dimensions
CL-4000PS H4
Lever Start type CL-4000PSX 1/4 HEX
CL-4000PS
CL-4000PSNL H4
∅32.5
∅28
■ Accessories
CL-2000 : 166 Acces- Torque Adjustment
CL-3000 : 183 Carbon
sories
CL-4000 : 197 Bits Spring Color
Brush Cord
Model (∅= wire diameter)
Push-to-Start type
∅37.5
(H4) Yellow
CL-2000 #0 ∅2x40 mm (∅1.0)
#0 ∅2.5x40 mm 1 piece each
1 piece each
Gold
CL-3000
(∅1.0)
CL-3000PS
CL-3000PS : 183 1 piece each 1.5 m
1 piece
∅37.5
(H4)
#0 ∅2.5x40 mm 1 pair
#1 ∅4x40 mm Blue
CL-4000
1 piece each (∅1.2)
CL-4000PS
(1/4 HEX) 1 piece each
#1, #2,
Cord 1.5m
CL-4000PS : 197 ∅5x50 mm
unit: mm 1 piece each
7
Electric Screwdrivers CL Series (Standard Type)
Drivers for precision assembly work, with functions
suitable for a wide variety of applications.
■ Push-to-Start Type
CL-6000PS/CL-6500PS
CL-7000PS
2.5 P
2.5 2.5
Y Y
■ Specifications 1.5 1.5 1.5
Br
1 1 1
Model CL-6000 CL-6500 CL-7000 W
Output Torque N•m 0.2 - 0.98 0.29 - 1.57 0.29 - 2.45 0.5 0.5 0.5
CL-6000 (H5)
CL-6000PS #1, #2
∅5x60 mm
CL-6500 1 piece each White (∅1.8) 1 pair 2m
CL-6500PS (1/4 HEX) 1 piece each 1 piece
CL-6000PS : 221
CL-6500PS : 236
#1, #2,
CL-7000 ∅5x50 mm Yellow (∅2.2)
CL-7000PS : 256
unit: mm CL-7000PS 1 piece each 1 piece each
8
Electric Screwdrivers α Series (Mini Type/Standard Type)
The Alpha Series drivers provide considerably higher
speed ranges than corresponding CL-Series tools, for
greater operating efficiency.
■ Push-to-Start Type
● Mini Type α-4500PS/α-5000PS
● Standard Type α-6500PS
* Mini-Type drivers : equipped with “PS” adaptor kits (see P.21).
■ Accessories
Acces-
Cord 1.5m α-4500 : 207 sories Bits Carbon
Cord
α-5000 : 207 Model
Brush
Push-to-Start type
∅37.5
9
Electric Screwdrivers CLS Series (Mini Type/Standard Type)
Motor speeds are much faster than standard models.
■ Push-to-Start Type
● Mini Type CLS-4000PS
● Standard Type CLS-6500PS/CLS-7000PS
* Mini Type of Push-to-start drivers : equipped with “PS” adaptor
kits (see P.21).
■ Accessories
Cord 1.5m CLS-4000 : 197
Acces-
sories Carbon
Bits Brush Cord
Model
∅37
10
Electric Screwdrivers SS Series (Mini Type/Standard Type)
SS drivers reduce impact approximately 80% less vi-
bration and impact shock to the working surface, per-
mitting a higher level of safety than previously pos-
sible when working on sensitive mechanisms like hard
disks, LCDs and high-density boards.
A special model conforming to class 100 clean room
specifications is also available. Standard types meet
NL specifications.
■ Lever Start Type
● Mini Type SS-3000/SS-4000
● Standard Type SS-6500/SS-7000
■ Push-to-Start Type
■ Accessories
Acces-
sories Carbon
SS-3000 : 183 Bits Brush Cord
Cord 1.5m SS-4000 : 197 Model
#0 ∅2.5x40 mm
∅39
SS-3000 (H4)
#1 ∅4x40 mm
SS-3000PS 1 piece each
(H4) #0 ∅2.5x40 mm
#1 ∅4x40 mm 1.5 m
SS-4000 1 piece each 1 piece
SS-4000PS (1/4 HEX) #1, #2, 1 pair
∅5x50 mm
Cord 2m 1 piece each
SS-6500 : 235 (H5) #1, #2 ∅5x60 mm
SS-7000 : 255 SS-6500 1 piece each
(1/4 HEX) #1, #2, 2m
unit: mm ∅5x50 mm 1 piece
SS-7000
* See P.7 for external dimensions of SS-3000PS, SS-4000PS. 1 piece each
11
High-Torque Drivers and Power Supplies
Model CL-9000 torque settings give stable, accurate
repeatability. The supporting arms for this driver ab-
sorb reaction torque and reduce physical stresses.
■ Push-to-Start Type
CL-9000 (Equipped with a shock-resistant stand)
■ CL-9000 Transformer
CLT-75 (Sold separately)
Rotating
*Base grip
■ Accessories
250
(1/4 HEX)
Torque adjusting nut #2, #3 2m
CL-9000 1 pair 1 set
∅7x100 m 1 piece
*marks are stand ASSY.
unit: mm 1 piece each
12
Power Supplies & Control Boxes
Control boxes are necessary for providing low voltage power for CL and α-series tools and to cut off current to the motor in response
to clutch action. Models CLT-20, CLT-50, CLT-65 and CLT-100 have both these functions.
CLT-20 (with built-in control box) CLT-50 (with built-in control box) CLT-65 (with built-in control box) CLT-100 (with built-in control box)
CLT-20 Power Pack for one Power Pack for one CL or α- Power Pack for α-6500. Power Pack for two CL or α-
CL-2000. series driver. Can also be used for one CL series drivers.
Note: CLT-20 is only suitable Note : This power pack cannot or α-series driver. Note: This power pack cannot
for CL-2000. So, it can be used with α-6500. be used with α-6500
not use for another elec- drivers
tric driver.
■ Specifications
Power Supply Model CLT-20 CLT-50 CLT-65 CLT-100 UL Listed
Size 95x160x52 (H) mm 105x185x91 (H) mm 182x140x132 (H) mm 182x145x130 (H) mm
Weight Approx. 0.71 kg 2.7 kg 4 kg 4 kg
CLT-50
Input AC 120 V or 220 V - 240 V 50/60 Hz R
Output Voltage HI Max. 1 A LOW/HI Max. 2.5 A LOW/HI Max. 3.5 A LOW/HI Max. 3.5 A
AC Cord Length 1.8 m
■ Specifications
Power Pack Model MC-70L
Size 320x220x140 (H) mm
Weight 12 kg MC-70L
Input AC 120 V or 220 V - 240 V 50/60 Hz
Output Voltage LOW/HI Max. 15 A
AC Cord Length 1.8 m
Trunk-line wire 20 m 1 line (Black and Red)
Accessories Branch-line wire 0.5 m 10 lines (Black and Red) U-Element 20 pieces #560B CB-105
Please do not use more than 20 meters of wire (standard accessory), to insure against errors in
meter readings due to inadequate voltage.
■ Control Box
CB-105 (MAIN and SUB)
A compact unit that responds to clutch action for control of any mini or stan-
dard driver (excepting automatic drivers). Must be used with the MC-70L SUB
MAIN
power supply or with M series driver power boxes. Connects between the
power source and driver. Separate control boxes are required for each driver.
The CB-105 control box must be used with the MC-70L power supply. The CB-105 (MAIN & SUB)
CB-05 control box cannot be used with this power supply. The CB-105 con- Size 70 x 42 x 100 (H) mm
trol box is also used with the soft-start driver shown here. (Production of the Weight 240 g
CB-05 and CB-10 control boxes were discontinued in October, 1999.) Input Cord Length 2m
Mounting Plates 2 pieces
13
Screwdriver-Power Pack Combinations
Classification of Screwdrivers
How to connect a control box Mini Type (CL-2000, CL-3000, CL-4000, α-4500, α-5000, CLS-4000, SS-3000, SS-4000)
Standard Type (CL-6000, CL-6500, CL-7000, α-6500, CLS-6500, CLS-7000, SS-6500, SS-7000)
Screwdriver Mini Type Standard Type
Connect the plus and minus output terminals
Power supply α-6500
on the rear panel of the tool to the trunk line,
leaving an appropriate length of line. Use a U-
shaped element to connect to the branch line
female connector, then connect to the male CLT-50
connector of the terminal on the control box. Not recommended
Wiring of U-Element
Insulation Cover
CLT-100
560B Branch Wire Not recommended
With built-in Up to
controller Up to 2 tools 2 tools
Trunk-line wire
U-shaped Element
Trunk-line wires
CLT-65
Branch
wires
With built-in
controller 1 tool 1 tool 1 tool
SUB
*
+
Control box
CB-105 (SUB)
To distribute 30V DC with sufficient capacity to accommodate the number of tools used.
Notice!
Please observe the following precautions when Individually SC-05 SC-10
combining power units for CL-2000 and SS se- built Control box Control box
power pack
ries drivers.
• Power supplies CLT-50 and CLT-65 after
+
1988 production are available. Control box
• Power supplies CLT-100 after 1987 produc- SC-05
or
tion is available. SC-10
Capacity: CL series - 2.5A (1.6A for Mini type) × N × 0.6
α series - 5.0A (2.5A for α-4500) × N × 0.6 for α-6500
*: In case of combination of CLS or SS drivers and MC-70L, Mini Type are available up to 20 tools, Stan-
dard Type are up to 10 tools.
■ Push-to-Start Type
● 120V VZ-1820PS/VZ-3012PS
0V
12 VZ-4506PS
● 230V VZ-1812PS/VZ-3007PS
Lever Start Type Push-to-Start Type VZ-4504PS
UL Listed
■ Specifications 120 V 220-230 V VZ-1820 VZ-1820PS
VZ-3012 VZ-3012PS
Model VZ-1820 VZ-3012 VZ-4506 VZ-1812 VZ-3007 VZ-4504
(U.S.A. AC120V) R
Output Torque N•m 0.39 - 1.76 0.88 - 2.94 0.98 - 4.4 0.39 - 1.76 0.88 - 2.94 0.98 - 4.4
Range lbf•in 3.5 - 16 7.8 - 26 8.8 - 39 3.5 - 16 7.8 - 26 8.8 - 39
(kgf•cm) 4 - 18 9 - 30 10 - 45 4 - 18 9 - 30 10 - 45 ■ Approximate Guidance of Output Torque
Power Consumption Approx. 40 W VZ-1820 VZ-3012 VZ-4506
N•m VZ-1812 VZ-3007 VZ-4504
Bl Y
Input AC 120 V AC 220 V-240 V 3 3 4.5
4
Unloaded Rotation Speed (r.p.m) 2000 1200 600 1200 700 400 2.5 2.5
VZ-3007 VZ-3007X-B
VZ-4504 VZ-4504X-B 220 V -
VZ-1812PS VZ-1812PSX-B 240 V
VZ-3007PS VZ-3007PSX-B
VZ-4504PS VZ-4504PSX-B
■ Accessories
Length Acces-
sories
Bit Carbon
Model
Brush
Grip dia.
Cable 3m VZ-1812
Push-to-Start type
VZ-3012
VZ-4506
VZ-1812
VZ-3007 (1/4 HEX)
VZ-4504 #1, #2,
1 pair
Length VZ-1820PS 1 piece each
VZ-3012PS
VZ-4506PS
Cable 3m VZ-1812PS
VZ-3007PS
unit: mm VZ-4504PS
15
Tranceformerless Screwdriver ACL Type (Mini Type)
■ Push-to-Start Type
ACL-10PS
Note: Production of Model 240V ACL-20, 30, 40,
ACL-20PS, 30PS, 40PS were discontinued
in December, 1996.
Bl
1
■ Specifications
Model ACL-10 0.5
■ External Dimensions
Cable 2.3m
ACL-10 : 225
42
Push-to-Start type
∅33.5
54 82
■ Accessories
Acces-
sories Carbon Controll
Bit Brush
Model
Box
ACL-10PS : 225
(H4)
ACL-10 1 piece
#1,#2 1 pair
unit: mm ACL-10PS
∅4x40mm 1 piece each
16
Suction Type Screwdrivers
Used with a suction attachment with which it is not
needed to use magnet screw catch.
Also suitable for non-steel and plastic screws.
■ Mini Type
CLQ-2000/CLQ-3000/CLQ-4000
αQ-4500/αQ-5000/CLSQ-4000/
SSQ-3000/SSQ-4000/ACLQ-10
■ Standard Type
CLQ-6000/CLQ-6500/CLQ-7000/
CL•α CL•α αQ-6500/CLSQ-6500/CLSQ-7000
Mini Type Standard Type VP-3
SSQ-6500/SSQ-7000
VZQ-1820/VZQ-3012/VZQ-4506
VZQ-1812/VZQ-3007/VZQ-4504
■ Order Code No.
Model Code No. Bit Shank
CLQ-2000 CLQ-2000 H4
CLQ-3000 H4
CLQ-3000
CLQ-3000NL H4
CLQ-4000 H4
CLQ-4000
CLQ-4000X 1/4 HEX • The torque adjusting method is the same as for CL-series screw-
CLQ-4000NL H4 drivers.
CLQ-4000NLX 1/4 HEX
AQ-4500 H4
AQ-4500X 1/4 HEX Suction type drivers require :
αQ-4500
AQ-4500NL H4 - Appropriate mouthpiece for different screw and bit size.
AQ-4500NLX 1/4 HEX - Longer bit size ; mini type drivers ... 60 mm
AQ-5000 H4
AQ-5000X 1/4 HEX
standard type drivers ... 80 mm
αQ-5000
AQ-5000NL H4 - A Vacuum Pump VP-3 and a power pack
AQ-5000NLX 1/4 HEX
CLSQ-4000 H4
CLSQ-4000X 1/4 HEX
CLSQ-4000 1. Suction type screwdriver.
CLSQ-4000NL H4
CLSQ-4000NLX 1/4 HEX 2. Vacuum pump VP-3.
SSQ-3000 SSQ-3000 H4 3. Power pack (CL•α screwdrivers)
SSQ-4000 H4 3 4. Screwrange.
SSQ-4000 1
SSQ-4000X 1/4 HEX 2
CLQ-6000 H5
CLQ-6000X 1/4 HEX
CLQ-6000
CLQ-6000NL H5
4
CLQ-6000NLX 1/4 HEX
CLQ-6500 H5
CLQ-6500X 1/4 HEX
CLQ-6500
CLQ-6500NL H5
CLQ-6500NLX 1/4 HEX
CLQ-7000 H5
CLQ-7000X 1/4 HEX
CLQ-7000
CLQ-7000NL H5
CLQ-7000NLX 1/4 HEX
AQ-6500 H5
AQ-6500X 1/4 HEX
αQ-6500
AQ-6500NL H5
AQ-6500NLX 1/4 HEX
CLSQ-6500 H5
CLSQ-6500X 1/4 HEX
■ Order Code No.
CLSQ-6500
CLSQ-6500NL H5
Model Code No. Voltage Bit Shank
CLSQ-6500NLX 1/4 HEX
CLSQ-7000 H5 VZQ-1820 VZQ-1820X-U
CLSQ-7000X 1/4 HEX VZQ-3012 VZQ-3012X-U 120V
CLSQ-7000
CLSQ-7000NL H5 VZQ-4506 VZQ-4506X-U
1/4 HEX
CLSQ-7000NLX 1/4 HEX VZQ-1812 VZQ-1812X-B
SSQ-6500 H5 VZQ-3007 VZQ-3007X-B 220-
SSQ-6500 230V
SSQ-6500X 1/4 HEX VZQ-4504 VZQ-4504X-B
SSQ-7000 H5 ACLQ-10
SSQ-7000 ACLQ-10 120V H4
SSQ-7000X 1/4 HEX ACLQ-10-U
17
Accessories for Suction Type Screwdriver
■ Suction Attachment (Option) ■ Accessories
Acces-
Convert CL•α•SS•VZ or ACL series drivers into suction type drivers. sories Torque Adjustment Carbon Cord & Suction Hose
Spring Color Brush (inside dia. x outside dia. x length)
Model
* See page 29,30 * for explanation of mouthpieces.
SSQ-3000
Gold (∅1.0) 1 piece
CLQ-3000
CLQ-4000 Blue (∅1.2) 1 piece Cord 1.5 m
Hose
αQ-4500 (∅4 x ∅7 x 2 m)
αQ-5000
CLSQ-4000
SSQ-4000
Mouth piece* CLQ-6000
CLQ-6500 White (∅1.8) 1 piece
CLQ-7000 Cord 2m
Yellow (∅2.2) 1 piece
SSQ-7000 1 pair Hose
αQ-6500 (∅4 x ∅7 x 2.5 m)
CLSQ-6500
CLSQ-7000
SSQ-6500
VZQ-1820 Cord 3m
VZQ-3012 Hose
Vacuum pick-up kit VZQ-1812 (∅4 x ∅7 x 3.5 m)
VZQ-3007
Screwrange box
18
Screwdriverws for Automatic Operation
Drivers for automated applications that insure torque
repeatability.
CLF-4000 (HH•XH/HN•XN)
αF-4500 (HH•XH/HN•XN)
αF-5000 (HH•XH/HN•XN)
● Standard Type
CLF-6000 (HH•XH/HN•XN)
CLF-6500 (HH•XH/HN•XN)
Mini Type Standard Type High Torque Type CLF-7000 (HH•XH/HN•XN)
[Ask for separate information guide, if you need more details.] αF-6500 (HH•XH/HN•XN)
● High Torque Type
CL-816A (XH/XN)
CL-825A (XH/XN)
CL-850A (XN/XN)
■ How to order :
C L F 3 0 0 0 H H
CLT
- AY
- 61
Bit receptacle Power Supply types
H:Hios shank H:Hios Power Pack
X: Hexagonal shank N:Nitto Seiko
Power Pack
■ Specifications
Torque Control Range Unloaded Rotation Speed (r.p.m)*1 Applicable Screw Size (mm) Weight (g) Bit Type
Type Driver Type
N •m (kgf •cm) HI LOW Small Size Screw Tapping Screw Hios 1/4 HEX.
CLF-3000 (HH•HN) 0.03 - 0.15 0.3 - 1.5 1000 560 1.0 - 2.0 1.0 - 1.7 400 H4
Low Torque Mini Type
CLF-4000 (HH•XH/HN•XN) 0.1 - 0.3 1 - 3.5 1000 560 1.4 - 2.6 1.4 - 2.3 430 H4 ○
CLF-6000 (HH•XH/HN•XN) 0.29 - 0.59 3 -6 750 400 2.0 - 3.0 2.0 - 2.6 610 H5 ○
Standard Standard
Torque Type CLF-6500 (HH•XH/HN•XN) 0.39 - 1.0 4 - 10 850 440 2.0 - 3.0 2.0 - 3.0 670 H5 ○
CLF-7000 (HH•XH/HN•XN) 0.49 - 1.47 5 - 15 780 420 2.0 - 4.0 2.0 - 4.0 754 H5 ○
Standard αF-4500 (HH•XH/HN•XN) 0.39 - 0.59 4 -6 1700 940 2.0 - 3.0 2.0 - 2.6 430 H4 ○
Mini Type
Torque/ αF-5000 (HH•XH/HN•XN) 0.39 - 0.74 4 - 7.5 1100 600 2.0 - 3.0 430 H4 ○
High Speed Standard
Type αF-6500 (HH•XH/HN•XN) 0.49 - 1.08 5 - 11 1700 950 3.0 - 4.0 2.6 - 3.0 670 H5 ○
CL-816A (XH/XN) 1.47 - 2.45 15 - 25 550 310 3.0 - 4.0 1220 ○
High Torque CL-825A (XH/XN) 1.96 - 3.9 20 - 40 370 210 4.0 - 5.0 1220 ○
CL-850A (XH/XN) 2.35 - 4.4 24 - 45 570 320 4.0 - 5.0 1700 ○
1
* Stepless adjustment
19
Power Supplies for Automatic Operation
■ Order Code No. ■ Order Code No.
Model Code No. Bit Shank Model Code No. Bit Shank
CLF-3000HH H4 CLF-7000HH H5
CLF-3000
CLF-3000HH-NL H4 CLF-7000XH 1/4 HEX
CLF-7000
CLF-4000HH H4 CLF-7000HH-NL H5
CLF-4000XH 1/4 HEX CLF-7000XH-NL 1/4 HEX
CLF-4000
CLF-4000HH-NL H4 AF-6500HH H5
CLF-4000XH-NL 1/4 HEX AF-6500XH 1/4 HEX
αF-6500
AF-4000HH H4 AF-6500HH-NL H5
AF-4000XH 1/4 HEX AF-6500XN-NL 1/4 HEX
αF-4500
AF-4000HH-NL H4 CL-816AXH
AF-4000XH-NL 1/4 HEX CL-816AXH-NL
CL-816A
AF-4000HH H4 CL-816AXN
AF-4000XH 1/4 HEX CL-816AXN-NL
αF-5000
AF-4000HH-NL H4 CL-825AXH
AF-4000XH-NL 1/4 HEX CL-825AXH-NL
CL-825A 1/4 HEX
CLF-6000HH H5 CL-825AXN
CLF-6000XH 1/4 HEX CL-825AXN-NL
CLF-6000
CLF-6000HH-NL H5 CL-850AXH
CLF-6000XH-NL 1/4 HEX CL-850AXH-NL
CL-850A
CLF-6500HH H5 CL-850AXN
CLF-6500XH 1/4 HEX CL-850AXN-NL
CLF-6500
CLF-6500HH-NL H5
CLF-6500XH-NL 1/4 HEX
HM-10/HM-100
These meters are especially designed to make it easy to measure torque of
automatic drivers. Measurement is possible as long as the sensor can be fit
in between the work stand and the bit. Has a printer terminal.
• Measuring range (N•m) / HM-10 : 0.015 - 1.000
Detector
HM-100 : 0.15 - 10.00
Detector dimension: 119 × 33 (H) mm
• Set includes Fidaptor, L-wrench and charge unit.
• Model HM-100 comes with 0.15 - 0.6 N•m measuring spring.
CLT-AY-61
CLT-AY-81
CLT-AY-61
Input / Output signals such as Pulse-Input, Reading Start,
etc. can be selected along with the suitable control of sys-
tem, and run on the same voltage as other controllers.
Designed for durable and maintenance-free power pack.
■ Specifications
Model CLT-AY-61 CLT-AY-81
CLT-AY-81
Power Consumption 180 W 350 W
Input AC 120 V or 230V ±5 % 50/60 Hz
Output DC 17 - 30 V DC 17 - 30 V ■ Order Code No.
(rated voltage ) Variable (PWM) Max. 4 A Variable (PWM) Max.10 A
Breaker Capacity 6.3 A 10 A Model Code No.
Size (mm) 233 (W) x 106 (H) x 170 (D) 320 (W) x 160 (H) x 230 (D) CLT-AY61-120 USA
Weight 4.2 kg 13.5 kg CLT-AY61-220 RCH
AC Cord Length Includes 1.8 m ground wire CLT-AY-61 CLT-AY61-230 VDE
CLF-3000, CLF-4000 CLT-AY61-230 HK
CLF-6000, CLF-6500
Compatible
1 CLT-AY61-230 SP
CLF-7000, αF-4500
drivers
CLT-AY81-120 USA
αF-5000, αF-6500 (Max. No. Drivers)
CLT-AY81-220 RCH
CL-816A, CL-825A CLT-AY-81 CLT-AY81-230 VDE
1
CL-850A CLT-AY81-230 HK
(Max. No. Drivers) CLT-AY81-230 SP
20
Special Electric Screwdrivers and Accessories
Pistol Type Screwdriver Pistol Grip Attachment PG-65
Suited for right-angle screw tightening operations Kit for converting a vertical (lever start or push-to-start)
Model: CL-6000P, CL-6500P l driver into a pistol-grip tool. Use with models CL-6000,
CL-7000P, α-6500P CL-6500, CL-7000, α-6500, SS-6500 and SS-7000.
l length
CL-6000P: 203
CL-6500P: 217
CL-7000P: 237
α-6500P: 217 130
unit: mm
CL-6500P
■ Accessories
Torque Adjustment Spring
Model Bit Color (∅= wire diameter)
CL-6000P (H5)
#1, #2
CL-6500P ∅5 x 50 mm 1 piece each White (∅1.8) 1 piece PG-65
78
Stand
130 130
515
or Holder
615
375
■ Specifications
140
Balancer Type S H
Unextended Length 23 cm 65 cm unit : mm
PG-18PS
104 ± 0.2
unit:mm
■ Pistol Type Screwdriver Order Code No. ■ Attachments and Order Code No.
Model Code No. Bit Shank Model Code No. Description
CL-6000P H5 Angle Attachment ANGL-Z
CL-6000, 6500, 7000, α-6500
CL-6000PX 1/4 HEX (Hios shank)
CL-6000P
CL-6000PNL H5 ANGLX-Z
CL-6000, 6500, 7000, α-6500
CL-6000PNLX 1/4 HEX (Hex. shank)
CL-6500P H5 VMS-40 VMS-40 CL•α•SS•ACL
CL-6500PX 1/4 HEX VMS-50 VMS-50 (Mini/Standard type)
CL-6500P
CL-6500PNL H5 VMS-50VZ VMS-50VZ VZ Driver
CL-6500PNLX 1/4 HEX Spring Balancer SPBL-S Mini type
CL-7000P H5 SPBL-H Standard type, VZ type
CL-7000PX 1/4 HEX Extension Cord 3 m EXTCD-5P3M
CL-7000P CL•α•SS
CL-7000PNL H5 Extension Cord 5 m EXTCD-5P5M
CL-7000PNLX 1/4 HEX
A-6500P H5
A-6500PX 1/4 HEX
α-6500P
A-6500PNL H5
A-6500PNLX 1/4 HEX ■ VZ Screwdriver Peripheral Units Order Code No.
Model Code No. Description
PG-18 PG-18 Lever start type
■ Attachments and Order Code No. PG-18PS PG-18PS Push-to-start type
Hand Support Ring VZ18-0960
Model Code No. Description Torque Adjustment VZ18-0970
Protect Cover
PG-65 PG-65 CL•α•SS Standard type
PS-1 PS-1 CL-4000, α-4500, 5000 Angle Attachment ANGLV-Z-XX Hex. shank
CLS-4000, SS-4000 ANGLV-Z-CH Hios shank
PS-2 PS-2 CL-3000, SS-3000 Shockless Stand VZ18PS-SAS Push-to-start type
22
Portable Screwdriver (Battery-type) F Series
F-Series featuring high tightening torque and
simple mechanisms
F-9900/F-9800/F-9500
F-9001 (External battery)
F-9900 F-9800 F-9000S (High speed)
F-9000
* Models F-9900, F-9800 and F-9500 use external carbon
brushes
F-9000S
F-9000 F-9001
■ Rechargeable Drivers F Series
Model Code No. Bit Shank
F-9900 F-9900-120
■ Specifications F-9900-220
F-9800 F-9800-120
Model F-9900 F-9800 F-9500 F-9000 F-9000S F-9001 F-9800-220
F-9500 F-9500-120
N •m 2-8 1-5 1-3 1-5
Torque range F-9500-220 1/4 HEX
(kgf•cm) 20 - 80 10 - 50 10 - 30 10 - 50 F-9001 F-9001-120
(External battery) F-9001-220
No load rotating speed (r.p.m) 450 650 450 900 450
F-9000S F-9000S-120
Size (L x H x D mm) 290x170x63 253 x 165 x 62 196x165x62 (High speed) F-9000S-220
Weight (g) 1600 1300 900 F-9000 F-9000-120
F-9000-220
Power Source 8 cells, 9.6 V 6 cells, 7.2 V FCE-96N-120
Only for F-9900
Charging Time 80 min 1 hour Charger FCE-96N-220
FCE-72N-120
Bit receptacle Hexagonal shank For other Models
FCE-72N-220
Battery FB-96N Only for F-9900
■ Optional Accessories FB-72 For other Models
Curled cord F91-8100 For F-9001
Drill Chuck Spare Battery
A Drill Chuck is used for a twist drill, These are the same batteries as the stan-
instead of a screw bit. dard equipment. They provide operations
without interruption by charging during
Type A (with 6.35 mm Joint shaft)
long and continuous work. FB-72 is used
This type easily becomes a drill chuck,
for F-9800, F-9500, F9000, F-9000S and
inserted into the hexagonal driver’s bit
F9001. FB-96 is used for F-9900.
shank. Simple drilling.
INTERCHARGING
FB-96
torque adjustment nut)
This type is used for more accurate tap- INTERCHARGING
RECHARGEABLE
BATTERY
6 CELLS 7.2V
FB-72
ping and drilling, exchanging whole
USE FOR EXCLUSIVE CHARGER
MADE IN JAPAN
and drilling.
FB-72 FB-96
FCE-96
Charger FCE-72 1 piece
1 piece
23
Other Electric Tools
Handy Tapper
SB-400C/SB-650C (Cord Type)
SB-900F (Rechargeable Type)
The Handy Tapper is an effective tool to make a tap on hole.
The Handy Tapper can freely adjust the tapping depth and can
automatically detect overload conditions to prevent tap’s damage.
It can also be used for drilling. The version equipped with a cord
requires a special power supply (SBT-50).
SB-900F
SB-900F-220
■ Accessories
167
Model Stopper Chuck Driver Battery Charger
key Cord
SB-400C 2 mm 2.3 mm 2.6 mm 1.5 m
1 piece each 1 piece
SB-650C 2.6 mm 3 mm 4 mm 1 piece 2m
1 piece each 1 piece
SB-900F 3 mm 4 mm 5 mm FB-72 FCE-72
1 piece each 1 piece 1 piece
SB-900F
unit: mm
■ SBT-50 Power Pack Specifications
Power Pack Model SBT-50
Input AC 120 V or 220 V - 240 V
Output Voltage LOW/HI Max. 2.5 A
Size 105 x 185 x 91 (H) mm
Weight 2.7 kg
24
Measuring Instrument Series: Torque Meters
■ HP series
HP-100/HP-10
Torque meters for torque setting of electric screwdriv-
ers, checking of torque drivers or torque wrenches,
etc. and torque measuring of rotors.
Measured torque is displayed on digital indicator.
Comes with printer and analog output terminals. Has
power save function (gives 100 hours of continuous
use in power save mode).
Other features:
• a minus sign is displayed when measuring in the
counterclockwise direction
• this minus sign is also printed out
HP-100
■ Order Code No.
Model Code No. Bit Shank
* The HP Torque Meter series was upgraded in October, 1999, adding power save and other func-
tions. Accordingly, some standard accessory parts were also modified. HP-100H-110
HP-100X-120
HP-100 H: With a Hios
HP-100H-220 shank
HP-100X-220 fidaptor.
■ Specifications HP-10H-110 X: With a 1/4
HP-10X-120 Hex. shank
Model HP-100 HP-10 HP-10
HP-10H-220 fidaptor.
Peak Mode N•m 0.15 - 10.00 0.015 -1.000 HP-10X-220
Measurement lbf•in 1.5 - 90.0 0.15 - 9.00
Range
■ Fidaptor with safety guard
(kgf•cm) 1.5 - 100.0 0.15 -10.00 The Fidaptor is an adaptor that buffers and absorbs
Accuracy ± 0.5% (F. S) the inertia that occurs during high-speed rotation. It
Measurement Modes track, peak has almost the same effect as that obtained in actual
Dimensions (mm) 124 x 230 x 65 (H) tapping screw fastening work. To control a clutch type
Weight (kg) 1.8
torque-controlled screwdriver, put this adaptor in the
balancing socket, then rotate the screwdriver.
Power source 1.2 V NiCd cell x 5 or rechargeable battery
Torque values are detected when the clutch is disen-
(Recharging time) (8 hours charging time)
gaged (automatically stopped). Also, it comes with a
Continuous use at full charge 12 hours / 100 hours in power save mode. safety guard type for the purpose of safety.
Rechargeable Battery AC120 V or 220-240 V input, DC7.2 V, 120 mA output
Circuits Printer output / Analog output
■ Standard Accessories
Exclusive
Market Fidaptor With Fidaptor Grease Battery
Model Driver Shaft
Areas Safety Guard Buffer Spring (*) Charger
Hios shank ∅5 Hex. shank Hios shank To use for Part
Measuring range: (Convertible shaft) ∅4 measuring No.
0.5 - 3 N•m 5 mm subtense 1 piece Lower range: TF-G3 120V
HP-100 (Black Spring) 1 piece (Upper) Part No. 0.15 - 0.6 N•m 1 piece 1 piece
Korea Part No.TF5G-Z 6.35 mm subtense TF5G-0010-4 (Yellow Spring) Korea
Taiwan (Fig. 1) (Lower) 1 piece (Fig. 6) 1 piece Taiwan
Hong Part No. TF6XG-0010 U.S.A. Fig. 1 Fig. 2 Fig. 3 Fig. 4
Kong (Fig. 5) Canada
Sin- Parts No.
gapore Hios shank ∅4 TCH-120N ■ Driver shaft (HP-100 standard accessories)
Measuring range:
0.15 - 0.6 N •m
Use one of the accessory shafts with
HP-10
(Yellow Spring) 1 piece screw if the Hios shank ∅5 does not fit
Part No.TF4G-Z
(Fig. 2) 220V the bit bearing of the driver being mea-
1 piece
Hex. shank To use for Hong Kong sured.
(convertible shaft) measuring Europe
5 mm subtense (upper) Lower range: Part No.
6.35 mm subtense (Lower) 0.15 - 0.6 N•m TCH-230G
HP-100 Measuring range: (Yellow Spring)
0.5 - 3 N•m 1 piece
(Black Spring) 1 piece
Europe Part No. TF6XG-Z
(Fig. 3) 220V
U.S.A. 1 piece
Canada Hex. shank Singapore
Australia (convertible shaft) U.K.
5 mm subtense (upper) Australia
6.35 mm subtense (Lower) Part No.
HP-10 Measuring range: TCH-230B
0.15 - 0.6 N•m
(Yellow Spring) 1 piece
Part No. TF6SG-Z
(Fig. 4) Fig. 5 Fig. 6
25
Measuring Instrument Series : Torque Meters
■ HDP series
HDP-50/HDP-5
For measuring tightening and loosening torque. Emits
an audible signal when the desired level of torque is
reached. Comes with printer and analog output termi-
nals. Has power save function (gives 100 hours of
continuous use in power save mode).
Other features:
• a minus sign is displayed when measuring in the
counterclockwise direction
• this minus sign is also printed out
■ HIT series
HDP-50
HIT-200/HIT-500/HIT-2000
Purpose :
* The HDP Torque Meter series was upgraded in October, 1999, adding power save and other Series HIT is a torque tester especially designed for
functions. Accordingly, some standard accessory parts were also modified.
impact tools and wrenches. Using HIT series, it can
be easily realised to measure and control torque of
■ Specifications bolts and nuts.
26
Bit Series
Classification of Screwdrivers
Mini Type H4 (CL-2000, CL-3000, CL-4000, α-4500, α-5000, CLS-4000, SS-3000, SS-4000, ACL-10)
Std. Type H5 (CL-6000, CL-6500, CL-7000, α-6500, CLS-6500, CLS-7000, SS-6500, SS-7000, VZ-1820, VZ-3012,
VZ-4506, VZ-1812, VZ-3007, VZ-4504)
Type
Name (Type) Specifications Overall Length (Standard mm)
(Dia. at base mm)
1.2 - 1.4, 1.7 38
Tip Holder (For Hios screws) BT 2.0 50
H4
(A) 4.0 A 40, 60, 80, 100, 120, 150, 180, 200
#2 4.0 A 40, 60, 80, 100, 120, 150
2.0 B 60
#0
2.5 B 60, 80, 100, 120
3.0 B 40, 60, 80, 100, 120
H5
#1 5.0 A 40, 60, 80, 100, 120, 150, 180, 200,
(∅5)
250, 300
5.0 A 40, 60, 80, 100, 120, 150, 200, 250,
Stepped #2
300, 400
(B)
#3 7.0 B 60, 80, 100, 120
*Relationship between point size No. and shape of shaft size
#00 → M0.8 - M1.0 # 2 → M3.0 - M5.0
# 0 → M1.2 - M1.7 # 3 → M6.0 - M8.0
# 1 → M2.0 - M2.6 *The numbers written in the right are screw size.
1.1 B 60, 80
Bit for Slotted Screws BS 1.3
0.28
B 60, 80
1.5 B 40, 60, 80
(Shape of shaft) 0.3
1.7 B 40, 60, 80
Straight
1.8 B 60, 80
(A)
H4
Blade thickness (mm)
*When placing an order, be sure to specify the name, type, detailed specifications, and overall length according to the Ordering Code.
27
Bit Series
Type
Name (Type) Specifications Overall Length (Standard mm)
(Dia. at base mm)
Bit for Hexagonal Nuts H4 4.0, 4.5, 5.0, 5.5, 6.0, 7.0 60
BC* 2
(∅4) 8.0 65
H5 4.0, 4.5, 5.0, 5.5, 6.0, 7.0 60
(∅5) 8.0 65
*1 Used for tightening hollow set screws, cap screws, etc.
*2 Used for bolt nuts.
Screwdriver type
Overall
A Straight
B Stepped } (BP, BS only) 9.0
X Other (other bits) Hios shank: [E]
H4 Mini Type
H5 Standard Type
BT Tip holder
BP for Cross slotted screws
BS for Slotted screws
BH for Hexagonal socket screws
BN for Hexagonal head bolts
When placing an order
BC for Hexagonal nuts
• One order for standard bits should not be less than one pack (10 pieces).
• One order for special bits should be:
For BT, BP, BS and BH types, not less than one lot (100 pieces).
For BN type, not less than one lot (50 pieces).
For BC type, not less than one lot (10 pieces).
28
Table of Mouthpieces and Fasteners (Mini Type)
F3 mini-size tools include Models CLQ-2000, CLQ-3000, CLQ-4000, αQ-4500, αQ-5000, ACLQ-10, CLSQ-4000, SSQ-
3000 and SSQ-4000.
d1
D
d
29
Table of Mouthpieces and Fasteners (Standard Type)
F6 standard-size tools include Models CLQ-6000, CLQ-6500, CLQ-7000, αQ-6500, ACLQ-20, VZQ-1820, VZQ-3012, VZQ-
1812, VZQ-3007, CLSQ, SSQ.
To select mouthpieces for non-standard specification fasteners, use the following formula to calculate dimension d1 and refer
to charts F3 or F6.
dimension D of fastener head + 0 - 0.2 mm = dimension d1
Diagram A Diagram B
M10×P0.75 M10×P0.75
Flat knurl Thread Flat knurl Thread
∅14
D1
d1
∅14
d1
d2
D
d
D
d
4 4
4.5 3 12 4.5 3
1.5 1.5 31
16
31
30
Keep our earth clean!
Exclusive agency
Mitsubishi Corporation