Professional Documents
Culture Documents
EMP-PJT-1 & PJT-3-MST-012-Thioflex 600
EMP-PJT-1 & PJT-3-MST-012-Thioflex 600
Client EMIRATES CENTRAL COOLING SYSTEMS CORPORATION PJSC Ref. No. EMP-PJT-1 & PJT-3-MSUB-012
Consultant YOUNG ENGINEERING CONSULTANCY SERVICES Revision 00
Contractor LEADERS FORT CONTRACTING L.L.C. Date 05-03-24
Location: Slab
□ Compliance Statement
Ref. (Specs, BOQ, Dwg): Please find the attached highlighted BOQ □ Catalogues/ Model/ Samples
Manufacturer / Supplier: □ Test Results
Country of Origin / Brand: □ Other
Reason for Alternative:
Contractor's statement: we confirm that we have checked all items submitted herewith and found them in compliance with the
contract documents and fit to the required purpose except:
Submitted by Contractor: Signature & Stamp: Received by Consultant: Signature & Stamp:
Name: Rashid Khader Name:
Date: 05-03-2024 Date:
The above submittal is: □ Approved □ Approved as Noted □ Revise & Resubmit □ Rejected
Consultant Engineer Signature & Stamp: Client Engineer Signature & Stamp:
Name: Name:
Date: Date:
PALM JUMEIRAH TRUNKS 1 AND 2- PLANT SRUCTURAL REPAIR WORK
Document Type Material Submittal for Multi-component, gun and pouring grade, polysulphide sealant
Document No.EMP-PJT-1 & PJT-3-MST-012 Current Rev.: 0 Last Revision Status: N/A
Comply Supporting Document Ref.
SL.No. Company's Requirements/Comments Document Reference Contractor's Response
Yes/No No. (as attachement)
As per Technical specification no 2.5- PRECAST JOINT TENDER REF. NO.: EMP-
1 Proposed Material :Thioflex 600 Yes ATTACHED DATA SHEET
SEALANT 45-TR-0417
(For Subcontractor)
Authorized Personnel Name:Rashid Khader
Designation: Project Engineer
Signature:
Date: 05-03-24
Technical Submittal
THIOFLEX 600
Summary
▪ Technical datasheet
Al Gurg Fosroc
The company was founded as a joint venture in 1975 between HE Easa Saleh Al Gurg
and Fosroc International. Al Gurg Fosroc is the first construction chemicals company to
establish a manufacturing base in the region, and presently serves the markets of the
U. A. E., Kuwait, Bahrain, Oman and other Fosroc companies worldwide.
Fosroc is one of the world's leading manufacturers of advanced technology products for
the construction and refurbishment industries.
For over 45 years, Al Gurg Fosroc is widely recognised as the market leader in concrete
repairs and protection, in particular; and has built a substantial reputation in a wide
range of product fields: Admixtures - Concrete repair and protection - Joint fillers
and sealants -Waterproofing - Protective coatings - Surface treatments -
Waterstops - Grouts and anchors – Flooring – Electrochemical products and
services.
Fosroc's success is built on a powerful combination of market knowledge, technical
resource, manufacturing expertise and problem-solving capabilities. The company
follows a policy of detailed product research and development providing high quality
products and long-term solutions.
The company has been the first construction materials manufacturing company to
introduce specification and AutoCAD services.
Al Gurg Fosroc's products are guaranteed for quality, but they must be applied correctly
and consistently to benefit from a long service life. To ensure this success, Al Gurg
Fosroc has introduced a Contracts and Application Department. This ensures that the
technical product knowledge is transpired to the applicators and the availability of the
local technical support center ensures that the correct application techniques are
followed.
Al Gurg Fosroc's commitment to total quality management system had lead to ISO 9002
certification in December 1994 - the first construction chemicals company in the Gulf
region to achieve this prestigious award. To keep up with the present market demands,
Al Gurg Fosroc has chosen the policy of continuous improvement, which led to
ISO 9001:2015 certification.
Al Gurg Fosroc was awarded the ISO 14001 certification in 1996 making it the first
construction chemicals company and the third company in any sector in the Gulf region
to receive this award.
As a clear indication of continual improvement in safety, quality and environmental
standards, Al Gurg Fosroc was awarded the OHSAS 18001 certification in October
2004. Currently updated to ISO 45001:2018.
Al Gurg Fosroc has a state of the art production unit, which has an output exceeding
160,000 metric tons per annum.
www.fosroc.com
Legal Type (Limited Liability Company)LLC ذات مسئولية محدودة الشكل القانونى
Expiry Date 09/03/2024 تاريخ النتهاء Issue Date 30/10/1974 تاريخ الصدار
® D&B D-U-N-S 561643177 الرقم العالمي Main License No. 300142 رقم الرخصة الم
No.
Register No. 41541 رقم السجل التجارى DCCI No. 10278 عضوية الغرفة
مدير Manager / الردن Jordan / منار صلح سعيد جمهور 496716
MANAR SALAH SAID JAMHOUR
ملك الشيخ مانع بن خليفه بن سعيد ال مكتوم -ام رمول P215-357UNIT7مستودع رقم
Print Date 10/03/2023 12:45 تاريخ الطباعة Receipt No. 14890100 رقم اليصال
يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة ،أرسل رقم الرخصة إلى ( 6969دو/اتصالت) للحصول
على اذن الدفع. Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message )SMS(. Send your trade year
license number to 6969 )Du/ Etisalat( to receive payment voucher. احصل على زوهو ون مجانا (
للسنة الولى
Zoho.com/det
وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي .لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
License no. 300142 300142 رقم الرخصة
Trade Name AL GURG FOSROC CO. (L.L.C) ( م. م.شركة القرق فوسروك )ذ السم التجاري
Legal Status Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانوني
Acts as an acoustic sealant Joints shall be sealed using Fosroc Thioflex 600, two part,
Accommodates continuous and cyclic movement polysulphide sealant, manufactured by Fosroc to BS 4254
1983, and ASTM C 920 -87. Joints shall be prepared and the
Excellent adhesion to most common substrates
sealant mixed and applied in accordance with the manufac-
High resistance to ageing reduces physical damage due
turer’s current data sheet.
to climatic extremes
Design criteria
Standards compliance
Thioflex 600 may be applied to joints between 5 and 50 mm
British Standard BS 4254: 1983.
wide. Joints which are expected to experience cyclic move-
British Standard BS 6920: 1988 (gun grade grey).
ments should be designed to an optimum width:depth ratio of
U.S. Federal Specification TT-S-00227E November 1969
2:1, subject to the overriding recommended minimum sealant
(amended 1970).
depths set out below:
DTp specification for Highw y Works Dec 1991 series
1000 clause 1017. 5 mm for metals, glass and other non-porous surfaces;
ASTM C 920-87, Type M, Class 25.
10 mm for all porous surfaces;
Example of a sealed subway expansion joint is shown below: Chemical resistance to occasional spillage:
Dilute acids resistant
Dilute alkalis resistant
Petrol resistant
Aviation fuels resistant
Diesel fuel resistant
Kerosene resistant
1 Thioflex 60 Lubricating oils resistant
2 Bond breaking tape Skydrol resistant
3 Supercast Rearguard ‘S’ waterstop White spirit resistant
4 Blinding concrete Chlorinated solvents not resistant
5 Membrane Aromatic solvents not resistant
6 Bitucell*‡ Dilute oxidising acids not resistant
Joint preparation
Form : Grey colour, multi-part,
The joint surfaces must be thoroughly dry, clean and frost
paste compound
free. Remove all dust and laitance by rigorous wire brushing,
Movement accommodation
grinding or grit blasting. Remove all rust, scale and protective
factor (BS 6093) : 25% butt joints
lacquers from metal surfaces. Remove any oil or grease with
50% lap joints
Fosroc Joint Cleaner.
Physical or
chemical change : Chemical cure Any expansion joint filler must be checked to ensure it is
Pot life : 2 hours @ 25°C tightly packed and no gaps or voids exist at the base of the
1 hour @ 35°C sealing slot before positioning a bond breaker.
Setting time : 36 hours @ 15°C
Note: The use of a bond breaker is not required in expansion
18 hours @ 25°C
joints containing Fosroc Hydrocell XL*‡ or Expancell*‡ cellular
12 hours @ 35°C
polyethylene expansion joint fillers. For construction or co -
Cure time : 2 weeks @ 15°C
traction joints a bond breaker tape or back-up strip should be
1 week @ 25°C
used. Where hydrostatic pressure exists, only bond breaking
4 days @ 35°C
tapes must be used, not foamed back-up strips.
Application temperature : 5 to 50°C
Hardness shore ‘A’ 25°C : 20 to 30 Where a particularly neat finish is required, mask the face
Water immersion : Thioflex 600 must be fully edges of the joint before priming and remove immediately
cured before permanent after tooling is completed.
immersion in water.
Priming
Biological resistance : Thioflex 600 has been eva -
uated in microbiologically ac- Non-porous surfaces
tive situations and has been
Use Primer MS2 on glass, ceramics and metals. The two
shown to have resistance to
part chemically active clear liquid is to be applied by brush or
aerobic conditions.
pad. One thin coat should be applied and allowed to dry for
Solids content : 100%
10 to 30 minutes prior to sealant application.
Density : 1.62 to 1.73 kg/litre
according to colour. Porous surfaces
Flash point : Over 65°C
Primer 7E: It is a two part high performance chemically active
Flammability : Burns but does not readily
non-toxic liquid for brush application to prime all concrete,
support combustion.
stone, brickwork, timber and unglazed edges of ceramic
tiles. Add component A of Primer 7E to component B and mix
throughly until a homogeneuos dispersion is achieved. Apply
one thin coat using a clean, dry brush, ensuring complete
coverage. Avoid over priming resulting in an excess of primer
in the base of the joint or application beyond faces. The mixed - Only Thioflex 600 Gun Grad should be used in vertical
Thioflex 600 must be applied when the primer becomes tacky or horizontal joints in reservoirs or other water retaining
but not wet (typically between 5 - 20 minutes after application). structures.
If the primer dries, the joint surfaces must be re-primed before
- Thioflex 600 is not recomme ded for use in highly chlorin-
applying the sealant.
ated water. If in doubt, contact your local Fosroc technical
Steel surfaces services department.
Thioflex 600, Primer 7E and Primer MS2 have a storage life Fosroc manufactures a wide range of complementary prod-
of 12 months when kept in original containers and stored in ucts which include :
dry conditions between 5°C and 27°C.
waterproofing membranes & waterstops
Thioflex 600, Primer MS2 and Primer 7E should not come in specialised flooring material
contact with skin and eyes or be swallowed. Avoid breathing
Fosroc additionally offers a comprehensive package of prod-
of vapour. Splashes must be washed off immediately. Wear
ucts specifically designed for the repair and refurbishment
impervious rubber or PVC gloves and eye protection. Hands
of damaged concrete. Fosroc’s ‘Systematic Approach’ to
should be thoroughly washed with soap and water before
concrete repair features the following :
eating or smoking. In the case of eye contact seek medical
attention immediately. hand-placed repair mortars
Thioflex 600 curing agent consists of a heavy metal based spray grade repair mortars
oxide. Cured sealant should not be burned off due to the
fluid micro-concrete
generation of toxic fumes. Empty containers must be collect-
ed for careful disposal and not left lying about. chemically resistant epoxy mortars
Fosroc Solvent 102 is flammable. Primer MS2 and primer chemical and abrasion resistant coatings
7E are highly flammable, store away from heat. Do not use
For further information on any of the above, please consult
near naked flames or other sources of ignition. No smo -
your local Fosroc office - as belo .
ing. Use in well ventilated surroundings. In the event of fire,
extinguish with CO2 foam.
Flash point
Primer MS2 : 23°C
Primer 7E : 23°C
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the recent version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional office
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
www.fosroc.com
UAE/0300/16/L
Method statement
Method statement constructive solutions
Thioflex 600
Section A : General Comments
Comments
High temperature working
It is suggested that, for temperatures above 350C, the following guidelines are adopted as
good working practice:
(i) Store unmixed materials in a cool (preferably temperature controlled) environment, avoiding
exposure to direct sunlight.
(ii) Keep equipment cool, arranging shade protection if necessary. It is especially important to
keep cool those surfaces of the equipment which will come into direct contact with the material
itself.
(iii) Try to avoid application during the hottest times of the day, arrange temporary shading as
necessary.
(iv) Make sufficient material, plant and labour available to ensure that application is a continuous
process.
Equipment
It is suggested that the following list of equipment is adopted as a minimum requirement
Protective clothing : Protective overalls
: Good quality gloves, goggles and face mask
Preparation equipment : Proprietary blasting equipment
Fosroc Joint Cleaner
Mixing equipment : 1 KW slow speed drill, 400 or 500 rpm,
plus Fosroc Mixing Paddle MR2
Application equipment : Brush
Fosroc Barrel Gun
Joint shaping tool
Fosroc operates a policy to encourage the use, where possible, of approved or licensed applicators.
This ensures that repairs are completed satisfactorily so that the long term performance of the
materials is assured. For contractors who wish to apply the materials themselves Fosroc is also able
to offer technical assistance and training, either on-site or at its Training Centre in Dubai.
Section B : Application Method
Al Gurg Fosroc
LLC
Post Box 657, Dubai telephone: fax: email:
United Arab Emirates (+9714) 2039699 (+9714) 2859649 agf@fosroc.com
www.fosroc.com Registered Office: 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Estate, Rashidiya, Dubai
constructive solutions
Refer to the Joint width/depth ratio as per manufacturers instructions in the technical
data sheet.
1.1 The substrate to which Thioflex 600 is bonded must be clean, dry and sound. All arris repairs
should be effected using a Fosroc repair compound.
1.2 Remove all dirt, surface laitence, residual joint former or other contamination from joint faces
by power wire brushing, grinding or grit-blasting. Ensure usage of dry, oil-free compressed air
for blowing all joints. Oil or grease can be removed using Fosroc Joint cleaner.
1.3 All expansion joints must be filled with fillers; tightly packed with no gaps or voids existing at
the base of the sealing slot.
1.4 For construction or contraction joints, a bond breaker or back up tape is recommended, but in
joints where hydrostatic pressure exists, only bond breaking tapes must be used.
2.0 Mixing
2.1.1 The two components of Thioflex 600, supplied in correct mixing proportions, must be
thoroughly mixed for atleast 2 minutes using the recommended Fosroc MR2 mixing
paddle fitted to a slow speed electric drill.
2.1.2 Ensure that the inside of the tin is scraped with a flat bladed tool so that there is no
component on the sides left unmixed.
2.1.3 Mixing should be continued for a further three minutes. The total mixing time is 5
minutes.
2.2.1 The two components of Thioflex 600, supplied in correct mixing proportions, must be
thoroughly mixed for 5 minutes.
2.2.2 Ensure proper mixing of the material right at the bottom of the tin, as it will effect the
curing otherwise.
3.0 Priming
3.1.1 The substrate to which Thioflex 600 is bonded must be primed with MS2 Primer.
Page 2 of 4
constructive solutions
3.1.2 Apply the primer onto the surface using a brush and leave to dry for 10 to 30 minutes
prior to sealant application.
3.2.1 The substrate must be primed with Primer 7E; a two component.
3.2.2 Apply one thin coat of Primer7E onto the surface using a clean, dry brush, ensuring
complete coverage.
3.2.3 The mixed Thioflex 600 must be applied when the primer is tack free.
3.2.4 Ensure application of Thioflex 600 within 6 hours @ 20°C, or 3 hours @ 35°C. Re-
priming is necessary if application is delayed.
4.0 Application
Thioflex 600 must not be used in direct contact with materials containing pitch or bitumen.
4.1 After completion of mixing of the two components, place the single hole follower plate over
the Thioflex and fill directly into a Fosroc Barrel Gun.
4.2 Gun Thioflex 600 firmly into the joint to ensure complete wetting of the bonding surfaces.
4.3 The pouring grade may be poured directly into horizontal joints. For application to horizontal
joints less than 15mm wide, load the Thioflex 600 into a Fosroc “G” Gun. For quantity
application, a Fosroc 1.5litre gun is available.
4.4 Compress and smooth the sealant with a joint shaping tool wetted with a dilute detergent
solution.
4.5 Upon smoothening of the sealant, immediately strip off any masking tape.
5.0 Cleaning
5.1Clean all equipment immediately after use with Fosroc Solvent 102.
Section C : Approval and variations
Page 3 of 4
constructive solutions
This method statement is offered by Fosroc as a „standard proposal‟ for the application of Thioflex
600. It remains the responsibility of the Engineer to determine the correct method for any given
application.
Where alternative methods are to be used, these must be submitted to Fosroc for approval, in
writing, prior to commencement of any work. Fosroc will not accept responsibility or liability for
variations to the above method statement under any other condition.
Page 4 of 4
MSDS
SAFETY DATA SHEET
This safety data sheet was created pursuant to the requirements of:
UK REACH Regulations (SI 2019/758 as amended)
1.2. Relevant identified uses of the substance or mixture and uses advised against
Supplier
Al Gurg Fosroc LLC
PO Box 657
Dubai
United Arab Emirates
+ 971 4 2858606
Page 1 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Signal word
Warning***
Hazard statements
H302 - Harmful if swallowed
H332 - Harmful if inhaled
H362 - May cause harm to breast-fed children
H373 - May cause damage to organs through prolonged or repeated exposure
H410 - Very toxic to aquatic life with long lasting effects***
EUH066 - Repeated exposure may cause skin dryness or cracking***
Precautionary statements
P201 - Obtain special instructions before use
P260 - Do not breathe dust/fume/gas/mist/vapours/spray
P263 - Avoid contact during pregnancy and while nursing
P264 - Wash face, hands and any exposed skin thoroughly after handling
P273 - Avoid release to the environment
P391 - Collect spillage***
Additional information
This product requires tactile warnings if supplied to the general public.***
Not applicable***
3.2 Mixtures***
Chemical name Weight-% EC No (EU UK REACH registration Classification according Specific M-Factor M-Factor
Index No) number to GB CLP (SI concentration (long-term)
2020/1567 as limit (SCL)
amended)
ALKANES, C14-17, 50 - 287-477-0 - Aquatic Acute 1 (H400) - - -
CHLORO*** <100% Aquatic Chronic 1
85535-85-9 (H410)
Lact. (H362)
Page 2 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
***
General advice Show this safety data sheet to the doctor in attendance.***
Inhalation Remove to fresh air. If symptoms persist, call a doctor. If breathing has stopped, give
artificial respiration. Get medical attention immediately.***
Eye contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a doctor.
Skin contact Wash skin with soap and water. In the case of skin irritation or allergic reactions see a
doctor.
Ingestion Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious
person. Get medical attention.***
Self-protection of the first aider Avoid breathing vapours or mists. Use personal protective equipment as required. See
section 8 for more information.***
4.2. Most important symptoms and effects, both acute and delayed
4.3. Indication of any immediate medical attention and special treatment needed
Suitable Extinguishing Media Use Alcohol-resistant foam, dry chemical, or carbon dioxide.***
Large Fire CAUTION: Use of water spray when fighting fire may be inefficient.
Unsuitable extinguishing media Do not scatter spilled material with high pressure water streams.
Special protective equipment and Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
precautions for fire-fighters Use personal protection equipment.
Page 3 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Personal precautions Ensure adequate ventilation. Use personal protective equipment as required. Evacuate
personnel to safe areas. Avoid breathing vapours or mists.***
Methods for cleaning up Absorb in vermiculite, dry sand or earth and place into containers. Label the containers
containing waste and contaminated materials and remove from the area as soon as
possible.
Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations.
Reference to other sections See section 8 for more information. See section 13 for more information.
Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Do not eat, drink or smoke when using this product. Remove
contaminated clothing and shoes. Ensure adequate ventilation. Avoid breathing vapours or
mists. In case of insufficient ventilation, wear suitable respiratory equipment.***
General hygiene considerations Do not eat, drink or smoke when using this product. Wash hands before breaks and
immediately after handling the product.***
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach
of children.***
Specific use(s)
The identified uses for this product are detailed in Section 1.2.
Risk Management Methods (RMM) The information required is contained in this Safety Data Sheet.
Page 4 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Biological occupational exposure This product, as supplied, does not contain any hazardous materials with biological limits
limits established by the region specific regulatory bodies.
Chemical name Freshwater Marine sediment Sewage treatment Soil Food chain
sediment
ALKANES, C14-17, 13 mg/kg sediment 2.6 mg/kg sediment 80 mg/L 11.9 mg/kg soil dw 10 mg/kg food
CHLORO*** dw dw
85535-85-9
Page 5 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Gloves
Duration of contact PPE - Glove material Glove thickness Break through time
Nitrile rubber 0.4 mm
General hygiene considerations Do not eat, drink or smoke when using this product. Wash hands before breaks and
immediately after handling the product.***
Page 6 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Oxidising properties The mixture itself has not been tested but none of the ingredient substances meet the
criteria for classification as oxidising.
Reactivity There are no known hazardous reactivity associated with the product when used as
recommended.
Explosion data
Sensitivity to mechanical impact None.
Sensitivity to static discharge None.
Inhalation Specific test data for the substance or mixture is not available. Harmful by inhalation. (based
on components).***
Eye contact Based on available data, the classification criteria are not met.
Skin contact Based on available data, the classification criteria are not met.
Ingestion Specific test data for the substance or mixture is not available. Harmful if swallowed. (based
on components).***
Acute toxicity
Page 7 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Based on available data, the classification criteria are not met.
Serious eye damage/eye irritation Based on available data, the classification criteria are not met.
Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
Germ cell mutagenicity Based on available data, the classification criteria are not met.
Carcinogenicity Based on available data, the classification criteria are not met.
Reproductive toxicity Classification based on data available for ingredients. May cause harm to breast-fed
children.***
The table below indicates ingredients above the cut-off threshold considered as relevant which are listed as reproductive toxins.***
Chemical name United Kingdom
ALKANES, C14-17, CHLORO*** Lact.
STOT - single exposure Based on available data, the classification criteria are not met.
STOT - repeated exposure May cause damage to organs through prolonged or repeated exposure.***
Aspiration hazard Based on available data, the classification criteria are not met.
Page 8 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Unknown aquatic toxicity Contains 0 % of components with unknown hazards to the aquatic environment.***
PBT and vPvB assessment This mixture contains substances considered to be persistent, bio-accumulating and toxic
(PBT).***
Endocrine disrupting properties This product does not contain any known or suspected endocrine disruptors.***
Waste from residues/unused Dispose of in accordance with local regulations. Dispose of waste in accordance with
products environmental legislation.
Page 9 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
IMDG
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(CHLORINATED
PARAFFIN (C14-17))***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
EmS-No F-A, S-F***
14.7 Maritime transport in bulk Not applicable***
according to IMO instruments
RID
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(CHLORINATED
PARAFFIN (C14-17))***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
ADR
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CHLORINATED
PARAFFIN (C14-17))***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
Tunnel restriction code (-)***
Page 10 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
The Water Environment (Water Framework Directive) (England and Wales) Regulations 2017 (as amended)
Not applicable
Chemical Safety Report No chemical safety assessment has been carried out for this product.***
Legend
SVHC: Substances of Very High Concern for Authorisation:
Classification procedure
Classification according to Regulation (EC) No. 1272/2008 [CLP] Method Used
Acute oral toxicity*** Calculation method***
Acute dermal toxicity*** Calculation method***
Acute inhalation toxicity - gas*** Calculation method***
Acute inhalation toxicity - vapour*** Calculation method***
Acute inhalation toxicity - dust/mist*** Calculation method***
Skin corrosion/irritation*** Calculation method***
Serious eye damage/eye irritation*** Calculation method***
Respiratory sensitisation*** Calculation method***
Skin sensitisation*** Calculation method***
Mutagenicity*** Calculation method***
Carcinogenicity*** Calculation method***
Reproductive toxicity*** Calculation method***
STOT - single exposure*** Calculation method***
STOT - repeated exposure*** Calculation method***
Acute aquatic toxicity*** Calculation method***
Chronic aquatic toxicity*** Calculation method***
Aspiration hazard*** Calculation method***
Ozone*** Calculation method***
Key literature references and sources for data used to compile the SDS
Agency for Toxic Substances and Disease Registry (ATSDR)
U.S. Environmental Protection Agency ChemView Database
European Food Safety Authority (EFSA)
European Chemicals Agency (ECHA) Committee for Risk Assessment (ECHA_RAC)
Page 11 / 12
- THIOFLEX 600 CURING AGENT Revision date 24/11/2023
Reason for revision Revision marks (***) indicate changes since the last revision.***
This material safety data sheet complies with the requirements of UK REACH Regulations (SI 2019/758 as amended)
Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical
agents at work
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
End of Safety Data Sheet
Page 12 / 12
SAFETY DATA SHEET
This safety data sheet was created pursuant to the requirements of:
UK REACH Regulations (SI 2019/758 as amended)
1.2. Relevant identified uses of the substance or mixture and uses advised against
Supplier
Al Gurg Fosroc LLC
PO Box 657
Dubai
United Arab Emirates
+ 971 4 2858606***
Page 1 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Signal word
Warning***
Hazard statements
H362 - May cause harm to breast-fed children
H411 - Toxic to aquatic life with long lasting effects***
EUH208 -*** Contains EPICHLOROHYDRIN, POLYMER W/BISPHENOL A. May produce an allergic reaction.***
EUH066 - Repeated exposure may cause skin dryness or cracking***
Precautionary statements
P260 - Do not breathe dust/fume/gas/mist/vapours/spray
P263 - Avoid contact during pregnancy and while nursing
P273 - Avoid release to the environment
P280 - Wear protective gloves/protective clothing/eye protection/face protection
P312 - Call a POISON CENTER or doctor if you feel unwell
P391 - Collect spillage***
Additional information
This product requires tactile warnings if supplied to the general public.***
Toxic to aquatic life. Contains a substance that is a SVHC - Liquid chlorinated paraffin.***
Not applicable***
3.2 Mixtures***
Chemical name Weight-% EC No (EU UK REACH registration Classification according Specific M-Factor M-Factor
Index No) number to GB CLP (SI concentration (long-term)
2020/1567 as limit (SCL)
amended)
LIQUID 10 - 287-477-0 - Aquatic Chronic 1 - - -
CHLORINATED <25% (H410)
PARAFFIN Lact. (H362)
85535-85-9
POLYSULPHIDE 10 - - - Aquatic Chronic 3 - - -
POLYMER WITH <25% (H412)
THIOL END GROUP
68611-50-7
EPICHLOROHYDRI 0.25 - 682-390-8 - Eye Irrit. 2 (H319) - - -
N, POLYMER <0.5% Skin Irrit. 2 (H315)
W/BISPHENOL A Skin Sens. 1 (H317)
25036-25-3
GAMMA-GLYCIDO 0.25 - 219-784-2 - Eye Dam. 1 (H318) - - -
Page 2 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
XYPROPYLTRIMET <0.5%
HYSILOXANE
2530-83-8
XYLENE 0.025 - 215-535-7 - Acute Tox. 4 (H312) - - -
1330-20-7 <0.25% Acute Tox. 4 (H332)
Flam. Liq. 3 (H226)
Skin Irrit. 2 (H315)
***
Chemical name CAS No SVHC candidates
LIQUID CHLORINATED PARAFFIN 85535-85-9 X
General advice IF exposed or concerned: Get medical advice/attention. Show this safety data sheet to the
doctor in attendance.***
Inhalation Remove to fresh air. If symptoms persist, call a doctor. If breathing has stopped, give
artificial respiration. Get medical attention immediately.***
Eye contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids.
Consult a doctor.
Skin contact Wash skin with soap and water. In the case of skin irritation or allergic reactions see a
doctor.
Ingestion Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious
person. Get medical attention.***
Self-protection of the first aider Ensure that medical personnel are aware of the material(s) involved, take precautions to
protect themselves and prevent spread of contamination. Avoid breathing vapours or mists.
Use personal protective equipment as required. See section 8 for more information.***
4.2. Most important symptoms and effects, both acute and delayed
4.3. Indication of any immediate medical attention and special treatment needed
Suitable Extinguishing Media Extinguish with carbon dioxide, dry powder or water fog.***
Large Fire CAUTION: Use of water spray when fighting fire may be inefficient.
Unsuitable extinguishing media Do not scatter spilled material with high pressure water streams.
Page 3 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Special protective equipment and Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
precautions for fire-fighters Use personal protection equipment.
Personal precautions Ensure adequate ventilation. Avoid breathing vapours or mists. Use personal protective
equipment as required.***
Methods for cleaning up Absorb in vermiculite, dry sand or earth and place into containers. Label the containers
containing waste and contaminated materials and remove from the area as soon as
possible.***
Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations.
Reference to other sections See section 8 for more information. See section 13 for more information.
Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Do not eat, drink or smoke when using this product. Remove
contaminated clothing and shoes. Avoid breathing vapours or mists. Ensure adequate
ventilation. In case of insufficient ventilation, wear suitable respiratory equipment.***
General hygiene considerations Do not eat, drink or smoke when using this product. Wash hands before breaks and
immediately after handling the product.***
Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach
of children.***
Page 4 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Specific use(s)
The identified uses for this product are detailed in Section 1.2.***
Risk Management Methods (RMM) The information required is contained in this Safety Data Sheet.
Biological occupational exposure This product, as supplied, does not contain any hazardous materials with biological limits
limits established by the region specific regulatory bodies.
Page 5 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Chemical name Freshwater Marine sediment Sewage treatment Soil Food chain
sediment
LIQUID CHLORINATED 13 mg/kg sediment 2.6 mg/kg sediment 80 mg/L 11.9 mg/kg soil dw 10 mg/kg food
PARAFFIN dw dw
85535-85-9
GAMMA-GLYCIDOXYPR 1.6 mg/kg sediment 0.16 mg/kg 8.2 mg/L 0.063 mg/kg soil dw
OPYLTRIMETHYSILOXA dw sediment dw
NE
2530-83-8
XYLENE 12.46 mg/kg 12.46 mg/kg 6.58 mg/L 2.31 mg/kg soil dw
1330-20-7 sediment dw sediment dw
General hygiene considerations Do not eat, drink or smoke when using this product. Wash hands before breaks and
immediately after handling the product.***
Page 6 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Odour Strong.***
Odour threshold Not determined***
Reactivity There are no known hazardous reactivity associated with the product when used as
recommended.***
Explosion data
Sensitivity to mechanical impact None.
Sensitivity to static discharge None.
Page 7 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Inhalation Specific test data for the substance or mixture is not available. Harmful by inhalation. (based
on components).***
Eye contact Based on available data, the classification criteria are not met.
Skin contact Based on available data, the classification criteria are not met.
Ingestion Based on available data, the classification criteria are not met.
Acute toxicity
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Based on available data, the classification criteria are not met.
Serious eye damage/eye irritation Based on available data, the classification criteria are not met.
Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
Germ cell mutagenicity Based on available data, the classification criteria are not met.
Page 8 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Carcinogenicity Contains a known or suspected carcinogen. Classification based on data available for
ingredients. Suspected of causing cancer.***
The table below indicates whether each agency has listed any ingredient as a carcinogen.***
Reproductive toxicity Classification based on data available for ingredients. May cause harm to breast-fed
children.***
The table below indicates ingredients above the cut-off threshold considered as relevant which are listed as reproductive toxins.***
Chemical name United Kingdom
LIQUID CHLORINATED PARAFFIN Lact.
STOT - single exposure Based on available data, the classification criteria are not met.
STOT - repeated exposure Based on available data, the classification criteria are not met.
Aspiration hazard Based on available data, the classification criteria are not met.
Ecotoxicity Toxic to aquatic life. Toxic to aquatic life with long lasting effects.***
Unknown aquatic toxicity Contains 0 % of components with unknown hazards to the aquatic environment.***
Page 9 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
promelas)
LC50: =780mg/L (96h,
Cyprinus carpio)
LC50: >780mg/L (96h,
Cyprinus carpio)
LC50: 30.26 - 40.75mg/L
(96h, Poecilia reticulata)
PBT and vPvB assessment This mixture contains substances considered to be persistent, bio-accumulating and toxic
(PBT).***
Endocrine disrupting properties This product does not contain any known or suspected endocrine disruptors.***
Waste from residues/unused Dispose of in accordance with local regulations. Dispose of waste in accordance with
products environmental legislation.
Page 10 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
IMDG
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(CONTAINS LIQUID
CHLORINATED PARAFFIN)***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
EmS-No F-A, S-F***
14.7 Maritime transport in bulk no information available.
according to IMO instruments
RID
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(CONTAINS LIQUID
CHLORINATED PARAFFIN)***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
ADR
14.1 UN number or ID number 3082***
14.2 UN proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS LIQUID
CHLORINATED PARAFFIN)***
14.3 Transport hazard class(es) 9***
14.4 Packing group III***
14.5 Environmental hazards Yes***
14.6 Special precautions for user
Special Provisions None
Page 11 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
The Water Environment (Water Framework Directive) (England and Wales) Regulations 2017 (as amended)
Not applicable
Chemical Safety Report No chemical safety assessment has been carried out for this product.***
Legend
SVHC: Substances of Very High Concern for Authorisation:
Classification procedure
Classification according to Regulation (EC) No. 1272/2008 [CLP] Method Used
Acute oral toxicity*** Calculation method***
Acute dermal toxicity*** Calculation method***
Acute inhalation toxicity - gas*** Calculation method***
Acute inhalation toxicity - vapour*** Calculation method***
Acute inhalation toxicity - dust/mist*** Calculation method***
Skin corrosion/irritation*** Calculation method***
Serious eye damage/eye irritation*** Calculation method***
Respiratory sensitisation*** Calculation method***
Skin sensitisation*** Calculation method***
Mutagenicity*** Calculation method***
Carcinogenicity*** Calculation method***
Reproductive toxicity*** Calculation method***
STOT - single exposure*** Calculation method***
STOT - repeated exposure*** Calculation method***
Acute aquatic toxicity*** Calculation method***
Chronic aquatic toxicity*** Calculation method***
Page 12 / 13
- THIOFLEX 600 GUN GRADE BASE Revision date 24/11/2023
Key literature references and sources for data used to compile the SDS
Agency for Toxic Substances and Disease Registry (ATSDR)
U.S. Environmental Protection Agency ChemView Database
European Food Safety Authority (EFSA)
European Chemicals Agency (ECHA) Committee for Risk Assessment (ECHA_RAC)
European Chemicals Agency (ECHA) (ECHA_API)
EPA (Environmental Protection Agency)
Acute Exposure Guideline Level(s) (AEGL(s))
U.S. Environmental Protection Agency Federal Insecticide, Fungicide, and Rodenticide Act
U.S. Environmental Protection Agency High Production Volume Chemicals
Food Research Journal
Hazardous Substance Database
International Uniform Chemical Information Database (IUCLID)
National Institute of Technology and Evaluation (NITE)
Australian National Industrial Chemicals Notification and Assessment Scheme (NICNAS)
NIOSH (National Institute for Occupational Safety and Health)
National Library of Medicine's ChemID Plus (NLM CIP)
National Library of Medicine’s PubMed database (NLM PUBMED)
National Toxicology Program (NTP)
New Zealand's Chemical Classification and Information Database (CCID)
Organisation for Economic Co-operation and Development Environment, Health, and Safety Publications
Organisation for Economic Co-operation and Development High Production Volume Chemicals Programme
Organisation for Economic Co-operation and Development Screening Information Data Set
World Health Organization
Reason for revision Revision marks (***) indicate changes since the last revision.***
This material safety data sheet complies with the requirements of UK REACH Regulations (SI 2019/758 as amended)
Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical
agents at work
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
End of Safety Data Sheet
Page 13 / 13
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Base component of pouring grade polysulphide sealant
Pictogram
1/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
3.2. Mixtures
Classification
Eye Irrit. 2 - H319
Skin Sens. 1 - H317
XYLENE <1%
CAS number: 1330-20-7 EC number: 215-535-7
Classification
Flam. Liq. 3 - H226
Acute Tox. 4 - H312
Acute Tox. 4 - H332
Skin Irrit. 2 - H315
2/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Ingestion Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse
mouth thoroughly with water. Get medical attention if any discomfort continues.
Skin contact Remove affected person from source of contamination. Remove contaminated clothing. Wash
skin thoroughly with soap and water. Get medical attention if any discomfort continues.
Eye contact Remove affected person from source of contamination. Remove any contact lenses and open
eyelids wide apart. Remove any contact lenses and open eyelids wide apart. Continue to
rinse for at least 15 minutes. Continue to rinse for at least 15 minutes and get medical
attention.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact Wash skin with soap and water for at least 15 minutes while removing contaminated clothing
and shoes. Get immediate medical attention. Thoroughly clean and dry contaminated clothing
before reuse. Destroy contaminated shoes.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Show this Safety Data Sheet to the medical personnel.
3/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
Reference to other sections For personal protection, see Section 8. For waste disposal, see Section 13. See Section 1 for
emergency contact information.
4/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
Protective equipment
Appropriate engineering Provide adequate ventilation. Avoid inhalation of vapours. Observe any occupational
controls exposure limits for the product or ingredients.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. The following protection should be worn: Chemical splash goggles or
face shield.
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible.
Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection
Hygiene measures Provide eyewash station. Do not smoke in work area. Wash hands at the end of each work
shift and before eating, smoking and using the toilet. Promptly remove any clothing that
becomes contaminated. Use appropriate skin cream to prevent drying of skin.
Respiratory protection Respiratory protection may be required if excessive airborne contamination occurs. Chemical
respirator with organic vapour cartridge.
5/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
Colour Grey.
pH No information available.
10.1. Reactivity
Reactivity Not polymerize.
6/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
TITANIUM DIOXIDE
Species Rat
Species Rat
Skin corrosion/irritation
Skin sensitisation
Skin sensitisation Local Lymph Node Assay (LLNA) - Mouse: Not sensitising.
STOT - single exposure Not classified as a specific target organ toxicant after a single exposure.
7/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
STOT - repeated exposure Not classified as a specific target organ toxicant after repeated exposure.
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
XYLENE
Carcinogenicity
Ecotoxicity Very toxic to aquatic life with long lasting effects. Very toxic to aquatic life. Dangerous for the
environment.
12.1. Toxicity
Ecological information on ingredients.
M factor (Acute) 10
M factor (Chronic) 1
TITANIUM DIOXIDE
Acute toxicity - aquatic EC₅₀, 48 hours: >100 mg/l mg/l, Daphnia magna
invertebrates
XYLENE
XYLENE
8/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
TITANIUM DIOXIDE
XYLENE
14.1. UN number
UN No. (ADR/RID) 3082
Proper shipping name ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS ALKANES,
(IMDG) C14-17, CHLORO, XYLENE)
Proper shipping name (ICAO) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS ALKANES,
C14-17, CHLORO, XYLENE)
Proper shipping name (ADN) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (CONTAINS ALKANES,
C14-17, CHLORO, XYLENE)
9/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
ADR/RID label 9
IMDG class 9
ICAO class/division 9
ADN class 9
Transport labels
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
10/11
Revision date: 09/12/2015 Revision: 3 Supersedes date: 25/07/2010
National regulations The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009
No. 716).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH), establishing a European Chemicals Agency, amending Directive
1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation
(EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives
91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.
General information The user must be instructed in the proper work procedure and be familiar with the contents of
these instructions.
Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.
Revision 3
Hazard statements in full EUH208 Contains EPICHLOROHYDRIN, POLYMER W/BISPHENOL A. May produce an
allergic reaction.
H226 Flammable liquid and vapour.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H362 May cause harm to breast-fed children.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
The information on this data sheet represents our current data and is reliable provided that the product is used under the
prescribed conditions and in accordance with the application specified on the packaging and/or in the technical guidance
literature. Any other use of the product which involves using the product in combination with any other product or any other
process is the responsibility of the user.
11/11
Test report
CERTIFICATE OF PRODUCT CONFORMITY
Dubai Central Laboratory Department (DCLD) of Dubai Municipality
hereby attests that the product(s)
ARIF AL MARZOOQI
Certification and Quality Control of Products Section Manager
Dubai Central Laboratory Department-Dubai Municipality
The attached Scope of Certification bearing the same Certificate Number forms an integral part of this Certificate.
This Certificate is an electronic document subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full.
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
Applicable Standard Specification: Al Sa’fat – Dubai Green Building System -2nd Edition,
January 2023.
PRODUCT
S/N BRAND NAME PRODUCT DETAILS
DESCRIPTION
Nitoprime WB *
Water Base
Dekguard Primer WB * for Interior and Exterior Application
Dekguard EP302 *
Nitocote SN502 *
Nitocote SN522 *
Nitocote Primer Sealer * Solvent Base for Interior and Exterior
CATEGORY 8
1. Nitoprime SP * Application
Binding Primers
Nitoprime Zincrich * VOC (Al Sa’fat DGBS limit is max. 750g/l)
Nitoprime 25 * Heavy metals: Cadmium and Chromium
Nitoprime 31 * (Al Sa’fat DGBS limit < 500 mg/Kg),
Nitoseal Primer MS2 * Arsenic, Mercury and Lead
Dekguard Primer * (Al Sa’fat DGBS limit <100 mg/Kg)
Dekguard Primer DG *
Trafficguard Primer *
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
Primer 7E *
Galvafroid *
Proofex Tackcoat
Proofex Torchseal Primer
Dekguard E2000 *
Dekguard AC *
Dekguard PU 100 *
Dekguard Filler *
Nitocote PE135 *
Nitoflor Lithurin 2
Nitoflor Hardtop
Nitoflor Levelcrete
Nitoflor Emeritop
Nitoproof 100
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
Nitoproof 600
Cemtop 200
Cemtop 250T
Cemtop 400 SD
Cemtop HD
Brushbond TGP
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
Nitocote ET402-E *
Nitocote ET550 *
Nitocote EN901 *
Nitocote NT402 *
Nitocote NT550 *
Nitocote HT120 *
Nitoflor Conductive *
Nitoflor EU5 *
Nitoflor EU10 *
Nitoflor EU50 *
Nitoflor FC140 *
Solvent Base
Nitoflor FC145 *
for Interior and Exterior Application
Nitoflor FC150 *
Nitoflor FC400 UH *
VOC (Al Sa’fat DGBS limit is max.500 g/l)
Nitoflor SL1000 *
Nitoflor SL2000 *
SRI (Result of sample tested is ≥78
Nitoflor SL3000 *
(WHITE COLOR)
Nitoflor SL4000 *
(See Note 3)
Nitoflor SL6000 UB *
Nitoflor TF100 UH *
Nitoflor TF120 UB *
Nitoflor TF5000 *
Nitoflor ET Slurry *
Trafficguard Top Coat *
Trafficguard Wear Course *
Trafficguard Membrane *
Trafficguard Intermediate *
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
Polyurea WPE
Polyurea FLM
Nitoseal PE290 *
Nitoseal PU280 *
Colpor 200
Flamex I
Flamex II
Nitoseal MS60 Architectural Application
4. Sealants
Nitoseal MS300 VOC (Al Sa’fat DGBS limit is max. 250 g/l)
Nitoseal MS600
Nitoseal PU40
Nitoseal PU220
Nitoseal PU220-PF
Thioflex 600
Nitobond EP *
Multi-Purpose Construction Adhesive
Nitobond SBR
VOC (Al Sa’fat DGBS limit is max. 70 g/l)
Nitobond AR
Nitotile 489 *
Nitobond Tile Adhesive
5. Adhesives Nitotile GP
Nitotile LM Ceramic Tile Adhesive
Nitotile EN VOC (Al Sa’fat DGBS limit is max. 65 g/l)
Nitotile C1Fix
Nitotile C2 Highfix
Nitotile XS
NOTE1: This document forms an integral part of the Certificate of Product Conformity bearing the same certificate number.
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020444
NOTE2: The above product shall bear the DCLD Conformity Mark.
NOTE3: The above SRI value is just for information. The user (owner, contractor and/or consultant) shall be fully responsible for
ensuring that the correct SRI value is followed according to the requirements of the applicable clause in the standard specification.
Acceptance limit shall be as per these values for each application of the product.
NOTE4: “ * “ – The Products are produced in AL GURG FOSROC L.L.C BRANCH, Industrial Area1, Jabel Ali, Dubai, UAE.
THIOFLEX 600
Hypermarket - Phase II in Al
Bu Haleeba Bu Haleeba
8 Buildings Barsha South- Plot No. 671- Thioflex 600 Sealant 1000 packs Dubai --- --- May-2021
contracting Contracting
9429
Page 1 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Construction of Giardino
Mall Building & United
Mall and Marina Workshop Tadmur
9 Building Thioflex 600 Ground Floor ---- Pearl, Qatar Development QPM/Dara ---- August-2020
Package A, B & C at the Contracting
External Co.
Pearl Qatar
Multilink
237-EROS Electricals Office
10 Industrial Thioflex 600 --- 50 Dubai ---- ---- Contracting ---- July-2020
& Warehouse
LLC
Sales
Proposed B+G+2 Rental & EXCELLENT
Branch -
11 Buildings Residential Building Al Thioflex 600 --- 51 ---- ---- INSULATION ---- June-2020
Dubai and
Barsha South Third CONT
Northern
Transport- 100
R902/emirates road Sport city Parsons De china state
12 Bridges- Thioflex 600 joint sealant 2.5Litre ---- ---- April-2009
widening, (RTA) Dubai Lieu cather contracting
Road packs
Page 2 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Building-
Snow World Project, AUH joint sealant Nael General
23 Commercial- Thioflex 600 575 Litre(s) Abu Dhabi ---- ---- ---- October-2006
Marina, (Investment co) internal contracting
Stadia
Page 3 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Building-
Cooling Tanks, SnC Lavlin,
Industrial- Tabreed Cooling plant
26 Thioflex 600 watertanks 100 Litre(s) Abu Dhabi ---- ---- (Code Cont. ---- February-2006
Power Project, (Tabreed)
coating co)
Station
National
Building- Application on
Projects &
Industrial- Contract 1009B- 30MGD concrete tanks 1200 Mouchel
28 Thioflex 600 Abu Dhabi ---- Construction ---- November-2005
Power SWRO, (Pal Technology) and associated Metre(s) Parkman
LLC, (Al Nasr
Station buildings
Irrigation)
Water- Nael & Bin
ADSS Contract 308/1, Liwa KEO
Waste Thioflex 600 1965 Harmal
29 Project, (Abu Dhabi Joint Sealant Abu Dhabi ---- International ---- September-2005
water- (Gun Grade) Litre(s) Hydroexport
Municipality) Consultants
Sewerage Est
Building- Al Khatib Engineering
Zabeel Park Development, Waterstops &
30 Leisure- Thioflex 600 200 Pack Dubai ---- Cracknell/ W Contracting ---- June-2005
(Dubai Municipality) Joint Sealing
Sports S Atkins Company
Building- Construction of Al Jaber
Unleaded Gasoline & Low Thioflex 600 4000
31 Industrial- Oil & Gas Abu Dhabi ---- Energy ---- March-2004
Sulphur Gas Oil, (Takreer) (Gun Grade) Litre(s)
Factory Facilities Services
Engineering
Water- DS 112- Al Mohaisanah Consultants
Target & Jima
Waste &Mezhar Sewerage & Thioflex 600 1500 & Dr Ahmed
32 Sealant Joints Dubai ---- Construction ---- February-2004
water- Drainage- Phase -1, (Dubai (Gun Grade) Litre(s) Abdel Warith
Co L.L.C
Sewerage Municipality) Consulting
Engineers
Page 4 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Page 5 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Al Habbai
Building- Extention to DOH&MS Head Coating For
Thioflex 600 120 2.5 litre Al Burj Contr. Co, (Al
41 Housing- Quarter Gov. of DXB., Concrete Dubai ---- ---- March-2003
(Gun Grade) tins consultant Habbai Contr.
Flats (Dubai Government) FLOOR
Co)
Transport- GSE Tunnel West of water proofing Al Naboodah
Dar AL-
42 Tunnels- Concourse 1-AX 086, (Dubai Thioflex 600 of 10 Ltr Dubai ---- Engineering ---- March-2003
Handasah
Road Civil Aviation) substructures Services
UNderpass
concrete
Transport- Dev of Al Ain Roads - Hilton
Thioflex 600 coatings, Maunsell Al Fahjan
43 Bridges- Interchange, (Al Ain 1300 Ltr Al Ain ---- ---- February-2003
(Gun Grade) sealants, below Consultants Cont. , Al Ain
Road Municipality)
ground
protective
M/S AMANA
STEEL BLBG
Building- BRIDGESTONE
Floor Coating & CONT. CO,
44 Industrial- WAREHOUSE FACILITYB, Thioflex 600 200 Litre(s) Dubai ---- M/S APEX ---- October-2002
Protection (M/S AMANA
Factory (BriDGESTONE LLC)
STEEL BLBG
CONT. CO)
Water-
Water Park for Sheik, (Abu Swimming Pool Abu Dhabi Al Ryum Cont
45 Swimming Thioflex 600 100 Litre(s) Abu Dhabi ---- ---- August-2002
Dhabi Municipality) Refurbishment Municipality Co
Pools- Pool
Jassaf
Building-
Al Mulla Plaza, (Al Mulla Sealants & Building
46 Commercial- Thioflex 600 45 Litre(s) Dubai ---- ---- ---- June-2002
Realstate) grouts Technology
Shops
Company
Transport- Underpass at Shahama
Bridge & 1200 Al Muhairy
47 Tunnels- Interchange, (Ministry of Thioflex 600 Abu Dhabi ---- Halcrow ---- May-2002
Tunnel Litre(s) Gen Cont Co
Road Public Works)
Page 6 of 7
Fosroc Job References | AGF
Marketing Department constructive solutions
THIOFLEX 600
Page 7 of 7
Previous Approvals
TCM Identification Code
Borouge 4 Project
LOCATION : RUWAIS -
U.A.E.
EPC package -4 U&O Unit Sheet 1/108 Rev L
Agreement Ref.: 4700000899
Company Identification
Abu Dhabi Polymers Company Limited (Borouge) Code
U4-SY-106-L1500092
THIS DOCUMENT IS BOROUGE’S PROPERTY AND CANNOT BE USED BY OTHERS FOR ANY PURPOSE WITHOUT PRIOR WRITTEN CONSENT
TCM Identification Code
Borouge 4 Project
LOCATION : RUWAIS -
U.A.E.
EPC package -4 U&O Unit Sheet 5/108 Rev L
Agreement Ref.: 4700000899
Company Identification
Abu Dhabi Polymers Company Limited (Borouge) Code
U4-SY-106-L1500092
Hazardous Material
Material to Use Wherever required as per Drawing and Project Specification Yes No
When to Use
Compliant
Specific Requirement
BGS-AU-055, Rev.6 and BGS-AU-057, Rev.5 Yes No
Details
Technical Details Attached
Atta c h a p p rov d IFC d ra w ing for s eaYesla nt th icNo
knes s
& loc a tion
ATTACHMENTS
Yes No Yes No
1 Company Profile
2 Trade License
3 -
4
Comments/Notes
THIS DOCUMENT IS BOROUGE’S PROPERTY AND CANNOT BE USED BY OTHERS FOR ANY PURPOSE WITHOUT PRIOR WRITTEN CONSENT
ARCADIS
09 March 2022
11 March 2022
11 March 2022
Material Approval Submittal
Project: JOTUN - R& D LABORATORY & REGIONAL OFFICE IN DUBAI SCIENCE PARK.
Submittal No.: JRD-MAS-STR-0065-00 Submittal Date: 9-Mar-2021
Submittal Description: Waterproofing Works for Wet Area Expansion Joint Received Date: 9-Mar-2021
Review Status: B: Approved as Noted Review Date: 10-Mar-2021
The above submittal has been reviewed for general compliance with the design intent of the contract documents.
Approval does not relieve the Contractor from errors and omissions in the submittal. Contractor is fully responsible for
the satisfactory performance as per the contract.
1. Contractor and their specialist waterproofing contractor responsible to ensure that proposed system is suitable for
the use at expansion joint in wet areas.
2. Ensure the damaged compressible filler currently inside expansion joint are replaced with new, prior to start of
waterproofing works.
3. Ensure comments through shop drawings are complied with.
4. Submit letter from M/s Terrazo confirming their terrazo/ screed material are compible to install on top of cementitious
waterproofing proposed through this submittal. Amana to coordinate between their specialist sub-contractors.
5. Specialist contractor responsible for any future cracks in cementitious coating that is applied on synthetic rubber
membrane.
6. Coordinate with expansion joint profile supplier and ensure shop drawings reflect their details including the bottom
seal.
7. Surface preparation, installation etc to be strictly as per manufacturer's written guidelines, approved shop drawings
and as per relevant contract specification clauses.
8. A mock up installation to be performed at a selected location on site under the supervision of technical
representative from the product manufacturer and inspected by the consultant, prior to proceeding with the permanent
applications.
9. Contractor to submit detailed coordinated shop drawings for the area of applications and project specific method
statement of installation/ITP prior to procurement and installation works.
10. Water leak tests to be carried out at the completed area of waterproofing and checked prior to next course of
activities.
11. Submit draft warranties for the product and installation. All warranties shall start from the date of taking over
certificate.
12.Delivery, storage, protection and handling of material shall be as per manufacturer’s written guidelines and to be
approved by the Engineer. Material delivery note with certification from manufacturer to be produced along with each
batch of material delivered at site as and when demanded.
13.Any material delivered to site must be of premium quality, to be free from any form of defects, damages, etc.
14.Approval to this material submittal will be considered null and void if the quality of material, installation and
workmanship deviate from standards/ requirements at site .
15. Approval to this submission is subject to contractor’s full compliance to above points and successful submission
and approval of construction documents such as shop drawings, method statement of installation, etc.
This response does not alter the Contract or diminish the Contractor's responsibility to complete the Works in full accordance with the Contract and does not
comprise a variation to the Contract. Should the Contractor require a change in the Contract cost or time, he shall submit an itemized proposal and obtain the
Employer's agreement prior to proceeding with Works.
Location / area of use / Discipline: Pumping Station (ESPN-1) and Rising Mains
Revise & Resubmit - Work May Not Proceed Rejected - Submit Another Alternative
Remarks:
Review and approval is only for general conformance with the design concept of the project and general compliance with the information provided in the contract documents.
Contractor, and his Subcontractor / Supplier, remains responsible for compliance with contract documents, confirmation and correlation of quantities and dimensions, selection
of fabrication process and techniques, coordination of trades, and performance of this work in a safe and satisfactory manner.
Jacobs 0.2 Sealant quantities based on the joint size shall be as per the guidance referred in the product data. SK 7-Nov-21
MSDS has been enclosed. A detailed Risk Assessment will be summitted with method statement
DEE 0.4 for the activity involving this material in the future.
KHK 4-Dec-21
NOTE: Review and approval is only for general conformance with the design concept of the project and general compliance with the information
provided in the contract documents. Contractor / Supplier remains responsible for compliance with contract documents, confirmation and correlation
of quantities and dimensions, selection of fabrication process and techniques, coordination of trades, and performance of this work in a safe and
satisfactory manner.
Legend
DOCUMENT TITLE:
MATERIAL APPROVAL REQUEST FOR CONCRETE JOINT SEALANT-FOSROC
DOCUMENT STATUS
x CODE 1 – APPROVED
CODE 2 – APPROVED WITH COMMENTS
THE FACT THAT IT HAS "ACCEPTED WITHOUT COMMENTS", DOES NOT RELEASE THE SUBCONTRACTOR FROM HIS RESPONSIBILITIES IN TERMS
OF COMPLIANCE WITH ALL CONTRACTUAL REQUIREMENTS
THE DOCUMENT ACCEPTANCE PROCESS IN ORDER TO GET THE "ACCEPTANCE" WITHOUT COMMENTS" DOCUMENT DOES NOT ENTITLE THE
SUBCONTRACTOR TO CONSIDER REPERCUSSIONS TO DEADLINES OR CONTRACTUAL AMOUNT
NAME DATE:
Rammohan sethuram 24-10-2019
80057-ZA-116-B, Rev. 0
Transmittal Response
Date:01-Jul-2021 01:22 PM
Description Material Approval Request for Joint Sealant, Filler Board and Backing Rod
Discipline CCV
Contractor Comments Material Approval Request for Joint Sealant, Filler Board and Backing Rod
Approved with comments-resubmit The contractor may proceed with work complying with the
comments provided by ADNOC Onshore
Revise and Resubmit The contractor shall not proceed with work. See the comments
provided by ADNOC Onshore for detail instruction about further
actions. Resubmit for Review/Approval
Rejected The contractor shall not proceed with work. See the comments
provided by ADNOC Onshore for detail instruction about further
actions
7. MAR DETAILS
Material Description: CIVIL & STRUCTURAL MATERIALS
Material Trade Name: Manufacturer. Country of Origin Supplier / Local Agent
SIKA POLYSULPHIDE PG
SIKAFLEX PRO-3
SIKA Switzerland SIKA UAE LLC
SIKA BACKING ROD
SIKASEAL-416 JOINT FILLER
FOSROC NITOSEAL PU40
FOSROC THIOFLEX-600 FOSROC UK AL Gurg FOSROC
FOSROC BITUCELL
VENDOR / SUPPLIER STATUS
Internationally
Pre-Qualified Not Prequalified Listed Proposed
Reputed
Compliance Remarks
Specification Clause Reference Proposed MATERIAL
Requirements Yes No.
Specification
Multicomponent Two or three component, SIKA POLYSULPHIDE PG
modified polyurethane, Fed spec TT-S-00227E, Primer: Sika-Primer-PS for joint under wet conditions
Type II, Class ✓
A; Pecora “Dynatrol II,” Sonneborn “ Sonolastic FOSROC THIOFLEX 600
Primer: FOSROC Primer-7E for porous substrates
NPII, “ Tremco Dymeric
SIKAFLEX PRO-3
Single component Fed Spec TT-S-00230C, Primer: Sika Primer-3 N for porous substrates
Type II, Class A; Pecora “Dynatrol I,” FOSROC NITOSEAL-PU40-
Sonneborn“ Sonolastic NP-I,” Tremco
✓
FORMERLY-HP40
“Dymonic”. Primer: FOSROC Primer-7E for highly absorbent Attached
substrates Technical
30-99-75-3227 – Sec. 13.2 Joint filler (for joints in Preformed, ASTM SIKASEAL-416-JOINTFILLER Datasheet and
D1752, Type I, closed cell Concrete pavement ✓ Project
and walks) FOSROC BITUCELL Specification.
DOCUMENT TITLE:
MATERIAL APPROVAL REQUEST FOR CONCRETE JOINT SEALANT-FOSROC
DOCUMENT STATUS
x CODE 1 – APPROVED
CODE 2 – APPROVED WITH COMMENTS
THE FACT THAT IT HAS "ACCEPTED WITHOUT COMMENTS", DOES NOT RELEASE THE SUBCONTRACTOR FROM HIS RESPONSIBILITIES IN TERMS
OF COMPLIANCE WITH ALL CONTRACTUAL REQUIREMENTS
THE DOCUMENT ACCEPTANCE PROCESS IN ORDER TO GET THE "ACCEPTANCE" WITHOUT COMMENTS" DOCUMENT DOES NOT ENTITLE THE
SUBCONTRACTOR TO CONSIDER REPERCUSSIONS TO DEADLINES OR CONTRACTUAL AMOUNT
NAME DATE:
Rammohan sethuram 24-10-2019
80057-ZA-116-B, Rev. 0
PALM JUMEIRAH TRUNK 1 AND TRUNK 3 BILLS OF QUANTITIES BILL No.
EMPOWER
PLANT BUILDING STRUCTURAL REPAIR WORKS
CONCRETE REPAIRS 2 R2
A RETAINING WALL
OPTION 1 - PU INJECTION
Carrying out crack repairs to the retaining wall using two component
polyurethane resin including surface preparation, installation of packers,
A.1.1 LM 500.00 340 (Rate only)
injecting resin, removal of packers and reinstating the finishes as per
technical specification 2.3.
Carrying out crack repairs to the retaining wall using resin including
surface preparation, installation of packers, injecting resin, removal of
A.1.2 M2 640.00 1,367 874,880
packers and reinstating the finishes as per technical specification 2.2.
(Provisional Item)
PJT1 (cont'n)
B RAFT SLAB
Carrying out crack repairs to the raft slab using two component epoxy
resin including surface preparation, installation of packers, injecting resin,
B.1.1 LM 250 285 71,250
removal of packers and reinstating the finishes as per technical
specification 2.3.
Supply and application of epoxy coating on the raft slab of the basement
B.2.1 M2 2,700 57 153,900
as per technical specification 2.9.
PJT1 (cont'n)
C BLOCKWORK WALL
A RETAINING WALL
Carrying out trial pits including shoring / dewatering (if required) and
repairs to the retaining wall using two component polyurethane resin
A.1.1 including surface preparation, installation of packers, injecting resin, Item 1.00 120,000 120,000
removal of packers and reinstating the finishes (including waterproofing
system).
PJT1 (cont'n)
A.2.2 Supply and installation of Galvanic anodes on the concrete repair areas
Nos 15.00 260 3,900
as per engineer's instruction.
B TRENCHES
Carrying out crack repairs to the retaining wall using two component
polyurethane resin including surface preparation, installation of packers,
B.1 LM 50.00 340 17,000
injecting resin, removal of packers and reinstating the finishes as per
technical specification 2.1.
C SLAB
C.2 Application of polysulphide sealant between precast panels. LM 60.00 155 9,300
D BLOCKWORK WALL
E PAINTING WORKS
Supply and application of paint on the interior areas of the ground floor
E.1 M2 880 30 26,400
including walls as per technical specification 2.8.
Supply and application of epoxy coating on the floor slab as per technical
E.2 M2 700 57 39,900
specification 2.9.
PROVISIONAL ITEM
PJT1 (cont'n)
6mm thick GRP lining waterproofing system to catch basin M2 1.00 250 Rate Only
PJT1 (cont'n)
Bill 2 R2 - Page 5 0
A RETAINING WALL
Carrying out crack repairs to the retaining wall using two component
polyurethane resin including surface preparation, installation of
A.1.1 LM 200.00 340 68,000
packers, injecting resin, removal of packers and reinstating the
finishes as per technical specification 2.2.
B SLAB
Carrying out crack repairs to the raft slab using two component
polyurethane resin including surface preparation, installation of
B.1.1 LM 95.00 285 27,075
packers, injecting resin, removal of packers and reinstating the
finishes as per technical specification 2.1.
Carrying out crack repairs to the slab soffit using two component
polyurethane resin including surface preparation, installation of
B.1.2 LM 75.00 275 20,625
packers, injecting resin, removal of packers and reinstating the
finishes as per technical specification 2.1.
PJT3 (cont'n)
A RETAINING WALL
Carrying out crack repairs to the retaining wall using two component
polyurethane resin including surface preparation, installation of
A.1.1 LM 40.00 340 13,600
packers, injecting resin, removal of packers and reinstating the
finishes as per technical specification 2.1.
PJT3 (cont'n)
B EXPANSION JOINT
C BLOCKWORK WALL
D PAINTING WORKS
A EXPANSION JOINT
A.1
Carrying out repair works to expansion joint including removal of
existing sealant, application of polysulphide sealant and reinstating LM 90 665 59,850
of finishes as per technical specification 2.7.
B BLOCKWORK WALL
PJT3 (cont'n)
C PAINTING WORKS
Carrying out crack repairs to the retaining wall using two component
polyurethane resin including surface preparation, installation of
A.1.1 LM 120 340 40,800
packers, injecting resin, removal of packers and reinstating the
finishes as per technical specification 2.2.
B EXPANSION JOINT
B.1
Carrying out repair works to expansion joint including removal of
existing sealant, application of polysulphide sealant and reinstating LM 50 665 33,250
of finishes as per technical specification 2.7.
PJT3 (cont'n)
C BEAM
D BLOCKWORK WALL
E PAINTING WORKS
PJT3 (cont'n)
6mm thick GRP lining waterproofing system to catch basin M2 1.00 250 Rate Only
PJT3 (cont'n)
Bill 2 R2 - Page 6 0