1, Generator, AGC275SP-Specification - Unlocked

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

TECHNICAL SPECIFICATIONS

AG – C275
POWERED BY CUMMINS SERIES
DIESEL GENERATING SET

400/230 V - 50Hz - 3Phase - 4Wires

Model Open Type AG – C275

Silent Type AG – C275SP

Engine CUMMINS 6LTAA8.9-G2


OPEN TYPE
Generator STAMFORD N250G4
Standby Power 275 kVA 220 kW
Prime Power 250 kVA 200 kW
Starter Voltage 24 V
Rated Current per Phase 396 A
Rated rotation speed 1500 rpm
Power Factor 0.8
Fuel Consumption 58L/hr
Fuel Tank Capacity AG – C275 303 L
(Internal)
AG – C275SP 460 L SILENT TYPE

WEIGHT AND DIMENSIONS


GEN-Set Dimension ( L * W * H ) Weight
CONTAINER TYPE
Open Type 2550 mm * 980 mm *1585 mm 2022 Kgs
silent Type 3686 mm * 1256 mm * 2068 mm 2680 Kgs

STANDARDS : • Single bearing alternator IP23

Standby Power : Continues running at variable load for • Insulation class H/H
duration of an emergency. No overload is permitted on
• Radiator 50 C max with coolant cap Skid
these ratings.
and vibration isolators
Prime Power : Continues running at variable load for
• Dry type air filter
unlimited periods with 10% overload available for 1 hour
in any 12 hour period. • Generator circuit breaker

• 12 V battery and cable

• Standard muffler

Anglo-Thai Power Co., Ltd.

No.100 Moo.10 Setthakit 1 Road, Tambol Khlong Ma-duea, Amphur Krathum Baen, Samut Sakhon 74110 Thailand.

Tel. 063-2219988 (Chaiyaporn Jundee)


ENGINE Specification
CUMMIINS : 6LTAA8.9-G2

 Heavy duty and durability diesel engine


 Four stroke,water cooled,turbocharged and aftercooled.
 Direct injection complete with electrical fuel system.
 Gear type lubrication system and bypass filter valve.
 24V cranking motor and battery charging alternator system.
 +/-0.50% speed variation at any constant load.
 Standard exhaust silencer and stainless steel bellows.
 Replaceable fuel filter,oil filter and dry element air filter.
 Standard thermostat and corrosion resistor.

Manufacture CUMMINS
Model 6LTAA8.9-G2
Engine speed Rated 1500 RPM
Cylinder /Arrangement 6 Vertical in line
Displacement 8.9 L
Bore and Stroke 114 mm × 145 mm
Compression ratio 16.6 : 1
Max. stand by power at rated RPM 240KW
Frequency regulation , steady state ≤ 0.25%
Governor : type Electrical
Aspiration and Cooling Turbocharged&Charge Air Cooled

Fuel System

Fuel consumption 100% (of the Standby Power) 58 L / h


Fuel consumption 75% (of the Prime Power) 44 L / h
Fuel consumption 50% (of the Prime Power) 30 L / h
Fuel consumption 25% (of the Prime Power) 15 L / h

Coolant System Exhaust System

Radiator & engine capacity 47 L Exhaust gas flow 108 L/s


Max water temperature 110 °C Exhaust temperature 470 °C
Max water temperature 82 – 93 °C Max back pressure 10 kPa

Air intake Oil system


Engine air flow 254 L/s Total lubrication capacity 27.6 L
w/filters

Anglo-Thai Power Co., Ltd.

No.100 Moo.10 Setthakit 1 Road, Tambol Khlong Ma-duea, Amphur Krathum Baen, Samut Sakhon 74110 Thailand.

Tel. 063-2219988 (Chaiyaporn Jundee)


ALTERNATOR Specification
STAMFORD : N250G4
FEATURES

• Utilizing wire-wound* (random-wound) technology


• Environment alternators are the industry
benchmark for all generator set configurations.
• Brushless excitation with AVR
• IP21, IP22, IP23, IP44 enclosure protection.
• The ideal solution for marine/offshore, UPS,
telecoms, basic and advanced protection,
construction and other continuous or standby
power applications.

STANDARDS

• GB755 ,BS5000 part three , VDE0530 ,NEMA MG1-22,


IEC-34,CSA C22-100 and AS1359
• All alternators are manufactured in ISO 9001 and ISO
14001 environments.

Manufacture STAMFORD
Type-model N250G4
Number of phase power 3
Factor (Cos Phi) 0.8
Pole/Bearing 4/1
Voltage regulation ± 1%
Coupling Direct
Exciter type Self Excitation
lnsulation : class , temperature rise H/H
Degree of protection IP23
AVR model AS-440
Altitude ≤ 1000m
Winding Pitch 2/3
Winding Leads 6 / 12

Anglo-Thai Power Co., Ltd.

No.100 Moo.10 Setthakit 1 Road, Tambol Khlong Ma-duea, Amphur Krathum Baen, Samut Sakhon 74110 Thailand.

Tel. 063-2219988 (Chaiyaporn Jundee)


CONTROL PANEL Specification
DEEPSEA : DSE 7320mii
AUTO START & AUTO MAINS FAILURE CONTROL MODULES

Manufacture DEEPSEA
Type-model DSE-7320mii

DIMENSION
OVERALL 240 mm x 181 mm x 42 mm
PANEL CUTOUT 220 mm x 160 mm
WEIGHT 400 g
KEY FEATURES

• Micro-processor based design


ALARMS IN CASE OF :
• Automatic Main Fail Controller via LCD
Display • Over and Under Speed
• Monitors engine performance and AC • Low and High battery volt.
power output • Start and Stop Failure
• LED alarm indication • Charge failure
• Front panel configuration of times and • Over Current
alarm trip points • Under / Over Voltage
• Easy push button control • Low oil pressure
• STOP/RESET • Emergency stop
• MANUAL • High coolant temperature
• TEST • kW overload
• AUTO • Unbalanced load
• MUTE ALARM • Earth fault trip
• START • Over crank
• Remote SCADA monitoring.
• RS485 communications. (BMS)
PERFORMANCE MONITORING
PROTECTION IN CASE OF :
• Generator volts (L-L / L-N)
• Reverse power (kW & kVAR) • Engine oil pressure (PSI-Bar)
• Unbalanced load • Generator ampere (L1 L2 L3)
• Earth fault trip • Engine temperature ( C & F )
• Over current • Generator frequency (Hz)
• kW overload • Plant battery volts
• Under / Over Speed • Engine hours run
• High coolant temperature • Mains volts (Ph-Ph/Ph-N)
• Low oil pressure • Generator kVA, kWh
• Under / Over voltage • Generator kW as % of rated kW setting
• Over crank • Generator Cos (o)
• Start failure • Tachometer

Anglo-Thai Power Co., Ltd.

No.100 Moo.10 Setthakit 1 Road, Tambol Khlong Ma-duea, Amphur Krathum Baen, Samut Sakhon 74110 Thailand.

Tel. 063-2219988 (Chaiyaporn Jundee)

You might also like