Professional Documents
Culture Documents
1734 AENT Reset
1734 AENT Reset
1734-AENT problem
Žiga Petrič
to:
viljem_blaznik@goodyear.com
04.07.2013 16:12
Hide Details
From: Žiga Petrič <Ziga.Petric@tehna.si>
Solution:
Customers are advised to perform an 888 reset and must follow the following procedures to make
sure an 888 reset is properly done:
1. Switch OFF the module power
2. Change the switch value to 888.
3. Switch ON the module power.
4. Wait for the Module Status LED to flash RED forever. The RED flash indicates the
completion of factory reset.
The table below shows the module LED sequence of an 888 reset:
About 3
Red Off Off Red Green Green
seconds
About 3
Green Off Off Green Green Green
seconds
LP
file:///C:/Users/neih192/AppData/Local/Temp/notes43AEC1/~web0248.htm 8.7.2013
Page 2 of 2
Žiga Petrič
Direktor
Tehna d.o.o.
Tehnološki park 19, 1000 Ljubljana, Slovenija
tel. 0038612801775
mob. 0038641382166
fax. 0038612801760
https://mail.tehna.si/exchweb/bin/redir.asp?URL=https://mail.tehna.si/exchweb/bin/redir.asp?
URL=https://mail.tehna.si/exchweb/bin/redir.asp?URL=https://mail.tehna.si/exchweb/bin/redir.asp?
URL=https://mail.tehna.si/exchweb/bin/redir.asp?URL=https://mail.tehna.si/exchweb/bin/redir.asp?
URL=https://mail.tehna.si/exchweb/bin/redir.asp?URL=https://mail.tehna.si/exchweb/bin/redir.asp?
URL=https://mail.tehna.si/exchweb/bin/redir.asp?URL=https://mail.tehna.si/exchweb/bin/redir.asp?
URL=http://www.tehna.si/" target="_blank" title="blocked::http://www.tehna.si/">www.tehna.si
file:///C:/Users/neih192/AppData/Local/Temp/notes43AEC1/~web0248.htm 8.7.2013