Professional Documents
Culture Documents
Smallsat Thermal Vacuum Systems
Smallsat Thermal Vacuum Systems
Chamber Environmental
• Cube chambers in three sizes (internal dimensions): • Base pressure <1x10-6 Torr
• 12L” x 12W” x 12H” • Turbomolecular high vacuum pump; cryopump
• 24” x 24” x 24” optional
• 36” x 36” x 36” • Active platen with a temperature range of -180 to
• Cylindrical chambers available as option +150C using LN2 injection cooling and Calrod
heaters
• Chambers constructed from Type 304 stainless steel • Temperature rate > 1C/min
with #4 finish
• Mechanical chiller option for facilities without
• Full opening door with optional viewport LN2 supply; temperature range to match
customer requirements
• Standard user ports (optional custom configurations
available). Cover plates included • Thermal shroud available as option
• 12” chamber: 1 each CF 2.75, NW40 • Internal aluminum thermal platen with ¼-20
• 24”: 1 each CF 2.75, ISO 100, NW40, NW16 Nitronic inserts on 2" grid
• 36”: 2 each CF 2.75, NW40, NW16; 1 x ISO 100 • Repressurization system backfills chamber with dry
gaseous nitrogen
https://dynavac.com
sales@dynavac.com
Rev 1.0 781-740-8600
SmallSat Thermal Vacuum Systems
Control system
NASA
• A wide range of accessories are available, including: • Systems are fully tested prior to shipping
- Cold plates and cold fingers
• System documentation includes Operation and
- User port signal and power feedthroughs Maintenance Manual, as-built mechanical drawings,
- Thermal data acquisition system (TDAS) and electrical schematics
- Auxiliary thermal control system (ACTS) • On-site installation and start-up service available
• Contact Dynavac for a full list of accessories • Covered by Dynavac warranty
• Annual maintenance contracts available