Professional Documents
Culture Documents
Design Notes Screen Type 3 C
Design Notes Screen Type 3 C
DATE: 8-Nov-2023
Page No.: 1
Cladding Class A is adopted since wind actions will be checked on all units of glazings and their intermediate fixings.
The maximum horizontal dimension of building does not exceed 50m.
Height above local ground floor level = 6.4 m
Ground Roughness, S2 = 0.92 CAT 1
Topographical Factor , S1 = 1 (Building is an inland building with no valley)
Statistical Factor , S3 = 1
Reductio Force Fn =
Member Length, l Width, ja Ratio, l/ja n factor, coeficient, CfnqKj
K cfn a
RHS 50x25 2500 25 100 0.95 2.1 0.16
RHS 50x25 2500 50 50 0.95 2.1 0.31
Design Wind pressure on Member at Wind 0 Deg = Fn x q = 0.49 KN/m2 (Perpendicular to smaller face)
Design Wind pressure on Member at Wind 0 Deg = Fn x q = 0.98 KN/m2 (Perpendicular to larger face)
PROJECT: MARADIVA RESIDENCE - VILLA SCREEN 3
DATE: 29-Aug-2023
Page No.: 2
ELEVATION 1
T3
M1
M2
M2
M2
M1 M1
M1
PROJECT: MARADIVA RESIDENCE - VILLA SCREEN 3
DATE: 29-Aug-2023
Page No.: 3
Page No.: 4
CHECK CONNECTION
RHS is connected to horizontal with 4.8mm Rivet pop
Maximum shear = 1.4 X 0.15 0.210 KN
Design Tensile load on Rivet Pop = 1.2 x R1 0.25 KN
No. of Rivet Pop provided = 2
Tensile load on Rivet Pop = 0.13 KN
Allowable tensile capacity of 4.8mm 0.8 KN (Refer to Annexe)
Provide 2 Nos 4.8mm Rivet Pop
CHECK BEARING
Thickness, t = 1.20 mm
Design Tensil load on 1 rivet = 0.13 KN
Diameter of rivet = 4.8 mm
Bearing stress = F/stress area =( 0.1 x 1000) / 4.8 x 1.2 = 22 N/mm2
< 110 N/mm2 . Bearing OK
PROJECT: MARADIVA RESIDENCE - VILLA SCREEN 3
DATE: 29-Aug-2023
Page No.: 5
Page No.: 6
CHECK CONNECTION
RHS is connected to horizontal with 4.8mm Rivet pop
Maximum shear = 1.4 X 0.07 0.098 KN
Design Tensile load on Rivet Pop = 1.2 x R1 0.12 KN
No. of Rivet Pop provided = 2
Tensile load on Rivet Pop = 0.06 KN
Allowable tensile capacity of 4.8mm 0.8 KN (Refer to Annexe)
Provide 2 Nos 4.8mm Rivet Pop
CHECK BEARING
Thickness, t = 1.20 mm
Design Tensil load on 1 rivet = 0.06 KN
Diameter of rivet = 4.8 mm
Bearing stress = F/stress area =( 0.06x 1000) / 4.8 x 1.2 = 10 N/mm2
< 110 N/mm2 . Bearing OK
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : mail@prokon.com Calcs by Checked by Date
========== S p a c e - F r a m e A n a l y s i s - P R O K O N =========================
Ver W3.0.42 - 14 Aug 2018
TITLE :
Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.
Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad
C1
Sum of: Px Py Mz
================= BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==================
========== S p a c e - F r a m e A n a l y s i s - P R O K O N =========================
Ver W3.0.42 - 14 Aug 2018
TITLE :
Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.
Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad
C1
Sum of: Px Py Mz
================= BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==================
========== S p a c e - F r a m e A n a l y s i s - P R O K O N =========================
Ver W3.0.42 - 14 Aug 2018
TITLE :
Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.
Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad
C1
Sum of: Px Py Mz
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : mail@prokon.com Calcs by Checked by Date
================= BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==================
========== S p a c e - F r a m e A n a l y s i s - P R O K O N =========================
Ver W3.0.42 - 14 Aug 2018
TITLE :
Prescribed displacements
Node Fixity X Y Z X-Rot Y-Rot Z-Rot Orien node
m m m rad. rad. rad.
Spring constants
Node Fixity X Y Z X-Rot Y-Rot Z-Rot
kN/m kN/m kN/m kNm/rad kNm/rad kNm/rad
C1
Sum of: Px Py Mz
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : mail@prokon.com Calcs by Checked by Date
================= BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==================
Section Properties :
Input Tables Settings
Code X/Radius Y/Angle Title
+ Rotation Angle 0 Clockwise positive
25 Poisson's Ratio 0.3 0.0 Minimum, 0.5 Maximum
50
-25 Number of equations 5000 200 Minimum, 30000 Maximum
- 1.2 1.2 Units mm Optional
22.6
47.6
-22.6
Bending Properties
A mm2 174.24
25.00
Ixx mm4 57.299E3 12.50 Y
X X
Torsional Properties
Pure Torsion:
J = 44.5E3 mm4 Zt = 1.46E3 mm3
Shear Centre:
X = 12.5 mm Y = 25.0 mm
Warping Torsion:
Cw = 620E3 mm6