Professional Documents
Culture Documents
Jobsite Inspection Template
Jobsite Inspection Template
Tricia Zimbalatti
Inspected by:
Company/Project: Canor
Number of Employees: 9 Copies to:
Date:
Secured
Proper angle (extension ladders)
Proper size and type
Safe, usable condition
Properly used
Proper Handrail and landings Not required at time of inspection
Page | 1
Jobsite Inspection Checklist
Non-slip bases
Adequately identified
Master emergency plan
Clear walkways
Clear work areas
Clear access and landing
CSA approved
Properly worn
Proper filler blocks in metal stairs Not applicable to this site at time of inspection
Proper cleats on ramps
Adequate lighting in stairwells
Proper handrails or guardrails
Page | 2
Jobsite Inspection Checklist
General condition
Proper guards, cords, PPE Proper PPE readily available for task and
required PPE in use.
Hard Hats/Safety Boots/High Vis/safety Glasses
Tagging as DEFECTIVE
Outdoor type, rated over 300 volts All extension cords in use had proper grounds in
good overall condition and suitable for tasks
being preformed
Condition of casing, ends, connections
WHMIS training
Company safety policy & program
Injury reporting
Hazard reporting
OH&S Act and Regulations
Personal H&S responsibilities
Trenching Safety
Working at Heights
Health & safety awareness
Page | 3
Jobsite Inspection Checklist
Worker training
Properly used
Page | 4
Jobsite Inspection Checklist
Properly identified
Overhead lines flagged & secured
Surface cables buried or protected
Properly located
Safely piled, stacked, bundled
Properly moved or lifted
Properly labeled (WHMIS)
Proper access
Air testing before entry
Rescue equipment readily available
Safety harness, lifeline properly
anchored & used
Second person for rescue
Outgoing air monitored
Entry permit where required
Page | 6
Jobsite Inspection Checklist
Cleanliness of facilities
Notes:
Page | 7