Care instructions IRON AND FELT TABLE MAGAZINE RACK

Wipe clean with a damp cloth. Do not use abrasive cleaners. USER GUIDE
Warnings!
The fittings pack contains small items which should be kept away from young children.

John Lewis Partnership

171 Victoria Street
London SW1E 5NN
johnlewis.com Product Code:
Made in China Please retain these instructions for future reference 57020308
Pre-assembly Thank you for purchasing this product. Please read the instructions and check pack Assembly instructions
preparation contents carefully before starting assembly of this product. A full checklist of
components is given in this leaflet. If any components are missing please contact
John Lewis and partners customer services. A
C
This product will take 1 person approximately 20 minutes to assemble.
D Step 1 Insert 2 wooden poles (D) through felt
The fitting pack contains small items which could present a choking hazard and should sling (C), then fix the top frame (A), the
be KEPT AWAY FROM YOUNG CHILDREN. felt sling (C) and the other wooden pole
(D) on the side frame (B) with screws (E)
Read this leaflet in full before commencing assembly. using Allen key.

E
Fittings and parts No. Picture Name Qty No. Picture Name Qty
checklist F
B
Top Side
A Board
1 B Frame
2

A C
B

Felt Step 2 Repeat for the other frame (B).

C Sling
1 D Pole 3

Allen
E Screw 10 F Key
1 E

D
F
B

Helpful advice 1. We suggest you spend a short time reading through this leaflet and then follow Step 3 Ensure unit is secure before use.
before you begin the simple step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the

3. Assemble this product on a soft surface.

4.
tightened during initial assembly. Only upon completion of the assembly should all

5.
fully tightened.
6. Keep out of reach of small children. It contains small parts which might present a
choking hazard.
7. Do not use any other tools other than those recommended to build this product.