Professional Documents
Culture Documents
Dabco LK 443
Dabco LK 443
Technical Information
DABCO® LK 443
Description Application
DABCO® LK 443 is a unique organic surfactant for DABCO® LK 443 is highly effective in the
use in rigid polyurethane applications to provide a production of rigid foams with fine cell structures,
smooth surface. It can be used as a replacement low K-factors, a low percentage of open cells,
or co-surfactant for silicone-based surfactants. excellent dimensional stability, and high strength
properties.
Key performance benefits
DABCO® LK 443 can be used in a variety of rigid
▪ Excellent hydrolytic stability
foam applications, but is highly recommended for
▪ Excellent cell stabilization
use in spray foams, particularly roofing
▪ Reduces pinholes to a minimum level
formulations. In this application, it helps to
▪ Promotes excellent surface quality in rigid
minimize pinholes and the "orange peel" effect
spray systems
typically observed with silicone-based surfactants.
Concentrations of 1.0–2.0 pphp are adequate for
Typical properties*
most formulations.
Safety instructions
Flash point (PMCC) 115 °C
Please consult the Safety Data Sheet for summary
Water solubility Partially soluble
of product hazards, personal protective measures,
and emergency release procedures.
* For actual ranges, please refer to the Certificate of Analysis
(CoA) / Sales Specification.
This information and any recommendations, technical or otherwise, are presented in good faith and believed to be correct as of the date Evonik Operations GmbH
prepared. Recipients of this information and recommendations must make their own determination as to its suitability for their purposes. Rellinghauser Straße 1-11
In no event shall Evonik assume liability for damages or losses of any kind or nature that result from the use of or reliance upon this 45128 Essen, Germany
information and recommendations. EVONIK EXPRESSLY DISCLAIMS ANY REPRESENTATIONS AND WARRANTIES OF ANY KIND, WHETHER Phone: +49 201 173 3006
EXPRESS OR IMPLIED, AS TO THE ACCURACY, COMPLETENESS, NON-INFRINGEMENT, MERCHANTABILITY AND/OR FITNESS FOR A Email: polyurethane@evonik.com
PARTICULAR PURPOSE (EVEN IF EVONIK IS AWARE OF SUCH PURPOSE) WITH RESPECT TO ANY INFORMATION AND RECOMMENDATIONS
PROVIDED. Reference to any trade names used by other companies is neither a recommendation nor an endorsement of the corresponding For any further information, contact either your
product, and does not imply that similar products could not be used. Evonik reserves the right to make any changes to the information regional sales or technical support or visit our
and/or recommendations at any time, without prior or subsequent notice. customer portal explorepu.evonik.com.