Professional Documents
Culture Documents
Right Using Tube HPLC
Right Using Tube HPLC
INDEX
Premium Grade Stainless Steel Tubing 12 Tubing Clip – The LC Tubing Organizer 29
Disclaimer
The maximum holding pressure for any type of connection involving tubing and a ferrule, varies considerably with the tubing
material, the ferrule material, the clearance between tubing OD and ferrule ID and the shape of the fitting detail.
PEEK Tubing
Pressure rating
Part No. ID (m) Qty/pkg Color See chart on page 5
JR-T-3750-M1 50 1m orange Chemical resistance
JR-T-3750-M3 50 3m orange See chart on page 118, ff
PEEK Tubing
Pressure rating
See chart on page 5
Chemical resistance
See chart on page 118, ff
Tolerances
Premium Grade Stainless Steel Tubing 1/32” OD OD: +/– 0.05 mm (.002”)
ID: +/– 0.025 mm (.001”)
C0207
VICI Jour offers pre-cut stainless steel VICI pre-cut tubing is specially steam Tolerances
tubing in lengths most commonly re- cleaned to remove both organic and inor- OD: +/– 0.05 mm (.002”)
quired in HPLC systems. These tubes are ganic contaminants. Furthermore soften- ID: +/– 0.025 mm (.001”)
cut to square, burr-free ends for zero er free PE caps are used to avoid the Pressure rating
dead volume connections. contamination of the tubing. For 1/16” OD tubing:
Varies with ID, min. 365 bar
(5300 psi)
Polymeric Tubing
Polymeric Tubing
– For low and mid pressure applications
– Biocompatible
C0582
Polymeric Tubing
Polymeric Tubing
We recommend fingertight
and flangeless fittings
for your applications
Fingertight page 35–40
Flangeless page 59–63
Polymeric Tubing
Polymeric Tubing
Pressure rating
FEP tubing natural 1/8” OD See chart on page 19
Chemical resistance
Part No. ID (mm) Qty/pkg See chart on page 118, ff
JR-T-6804-M3 1.59 3m
Special Info
JR-T-6804-M10 1.59 10 m Low pressure applications:
JR-T-6804-M25 1.59 25 m Check carefully for gas
permeability
JR-T-6813-M3 2.1 3m
Spares & Tools
JR-T-6813-M10 2.1 10 m
The VICI Jour Clean-Cut
JR-T-6813-M25 2.1 25 m tubing cutter JR-797 gives
you burr-free perpendicu-
JR-T-6814-M3 2.4 3m lar cuts (see page 30)
JR-T-6814-M10 2.4 10 m
We recommend fingertight
JR-T-6814-M25 2.4 25 m and flangeless fittings
for your applications
Fingertight page 35–40
Flangeless page 59–63
FEP tubing natural 3/16” OD
Polymeric Tubing
1/16” OD tubing
OD: +/– 0.05 mm (.002”)
FEP tubing natural 2 mm OD
ID: +/– 0.05 mm (.002”)
1/4” OD tubing
FEP tubing natural 3 mm OD
OD: +/– 0.10 mm (0.004”)
ID: +/– 0.10 mm (0.004”)
Part No. ID (mm) Qty/pkg
Pressure rating
JR-T-6310-M3 1.0 3m
See chart on page 19
JR-T-6310-M10 1.0 10 m
Chemical resistance
See chart on page 118, ff JR-T-6310-M25 1.0 25 m
JR-T-6320-M1 2.0 1m
Special Info
Low pressure applications: JR-T-6320-M3 2.0 3m
Check carefully for gas JR-T-6320-M10 2.0 10 m
permeability
Other pack sizes and tubing lengths are available on request.
Spares & Tools Please contact your local distributor or VICI directly.
The VICI Jour Clean-Cut
tubing cutter JR-797 gives
you burr-free perpendicu-
lar cuts (see page 30)
Customized tubing on request! Please specify OD and ID.
Minimum Order Quantity 30 m.
We recommend fingertight
and flangeless fittings
for your applications
Fingertight page 35–40
Flangeless page 59–63
Polymeric Tubing
Dimensions
Part No. ID (mm) Qty/pkg
See chart
JR-T-084-M3 0.25 3m
Tolerances
JR-T-084-M10 0.25 10 m 360 m (0.014”) OD tubing
JR-T-084-M25 0.25 25 m OD: +/– 0.013 mm (.0005”)
ID: +/– 0.013 mm (.0005”)
Other pack sizes and tubing lengths are available on request.
Please contact your local distributor or VICI directly. 1/32” OD tubing
OD: +/– 0.013 mm (.0005”)
ID: +/– 0.013 mm (.0005”)
ETFE tubing 1/16” OD
1/16” OD tubing
OD: +/– 0.05 mm (.002”)
Part No. ID (mm) Qty/pkg
ID: +/– 0.05 mm (.002”)
JR-T-078-M3 0.17 3m
1/8” OD tubing
JR-T-078-M10 0.17 10 m OD: +/– 0.10 mm (.004”)
JR-T-078-M25 0.17 25 m ID: +/– 0.10 mm (.004”)
Other pack sizes and tubing lengths are available on request. Spares & Tools
Please contact your local distributor or VICI directly. The VICI Jour Clean-Cut
tubing cutter JR-797 gives
you burr-free perpendicu-
Customized tubing on request! Please specify OD and ID. lar cuts (see page 30)
Minimum Order Quantity 30 m.
We recommend fingertight
and flangeless fittings
for your applications
Fingertight page 35–40
Flangeless page 59–63
Polymeric Tubing
Pressure rating
Recommended maximum working pressure ETFE tubing
See chart on page 26
OD ID bar psi
Chemical resistance
See chart on page 118, ff 1/32” 0.25 mm 152 2200
Special Info
1/16” 0.17 mm 200 2900
Low pressure applications:
Check carefully for gas 0.25 mm 186 2700
permeability
0.50 mm 152 2200
Spares & Tools 0.75 mm 117 1700
The VICI Jour Clean-Cut
tubing cutter JR-797 gives 1.00 mm 83 1200
you burr-free perpendicu-
lar cuts (see page 30)
1/8” 1.59 mm 110 1600
We recommend fingertight
and flangeless fittings
for your applications 3.0 mm 1.00 mm 138 2000
Fingertight page 35–40
Flangeless page 59–63
6.0 mm 4.00 mm 69 1000
Polymeric Tubing
Dimensions
Part No. ID Qty/pkg
See chart
JR-T-43650-M1 50 m 1m
Tolerances
JR-T-43650-M3 50 m 3m 360 m (0.014”) OD tubing
JR-T-43675-M1 75 m 1m OD: +/– 0.013 mm (.0005”)
ID: +/– 0.013 mm (.0005”)
JR-T-43675-M3 75 m 3m
JR-T-436100-M1 100 m 1m 1/32” OD tubing
OD: +/– 0.013 mm (.0005”)
JR-T-436100-M3 100 m 3m ID: +/– 0.013 mm (.0005”)
JR-T-436150-M1 150 m 1m
1/16” OD tubing
JR-T-436150-M3 150 m 3m OD: +/– 0.05 mm (.002”)
ID: +/– 0.05 mm (.002”)
Other pack sizes and tubing lengths are available on request.
Please contact your local distributor or VICI directly. 1/8” OD tubing
OD: +/– 0.10 mm (.004”)
ID: +/– 0.10 mm (.004”)
PFA tubing natural 1/16” OD
3/16” OD tubing
Part No. ID (mm) Qty/pkg OD: +/– 0.10 mm (0.004”)
ID: +/– 0.10 mm (0.004”)
JR-T-4001-M3 0.50 3m
1/4” OD tubing
JR-T-4001-M10 0.50 10 m
OD: +/– 0.10 mm (0.004”)
JR-T-4001-M25 0.50 25 m ID: +/– 0.10 mm (0.004”)
JR-T-4002-M3 0.75 3m Pressure rating
JR-T-4002-M10 0.75 10 m See chart on page 26
Polymeric Tubing
C0583
Polymeric Tubing
Pressure rating
OD ID bar psi OD ID bar psi See chart on page 26
360 m 50 m 103 1500 1/8” 1.59 mm 72 1050
Chemical resistance
75 m 96 1400 1.70 mm 65 940 See chart on page 118, ff
100 m 90 1300
Special Info
150 m 75 1100 3/16” 3.20 mm 41 600 Low pressure applications:
Check carefully for gas
permeability
1/16” 0.50 mm 100 1450 1/4” 4.35 mm 45 650
Spares & Tools
0.75 mm 76 1100 The VICI Jour Clean-Cut
1.00 mm 55 800 tubing cutter JR-797 gives
you burr-free perpendicu-
lar cuts (see page 30)
We recommend fingertight
Recommended maximum working pressure PTFE tubing and flangeless fittings
for your applications
OD ID bar psi Fingertight page 35–40
Flangeless page 59–63
1/16" 0.18 mm 62 900
0.25 mm 55 800
0.50 mm 48 700
0.75 mm 37 550
1.00 mm 25 350
1/8" 1.59 mm 35 500
4.75 mm 18 250
1/4” 4.75 mm 17 250
2 mm 1.70 mm 10 150
4 mm 3.00 mm 17 250
4.76 mm 3.76 mm 14 200
Impermeable Tubing
C0290
JR-T-6130
JR-6141
JR-051
Impermeable tubing
Spare Parts
VICI offers thermoformed tubing in vari- The form maintains shape if the tempera-
ous geometric shapes. Straight tubing, ture does not exceed 100°C.
spirals or even more complex forms, just Contact your local distributor or VICI di-
define form and material on a drawing. rectly for a quotation.
C0488
810 000
C0211
C0629
C0478
C0297
SS Pre-Cut tubing This is the ideal tool for cutting 1/16” and
(see page 14–15) 1/8” stainless steel tubing, leaving
smooth, uniform cuts with a minimum of
Use The File JR-802
to deburr the cuts
deburring and/or reaming. The easily re-
(see page 56) placed cutting wheel scores tubing. The
result are cuts which allow tube-to-tube
and tube-to-frit connections.
C0294
C0617
Easy-Flange Kit
C0616
C0202