Professional Documents
Culture Documents
Certificate of Class (+supplement)
Certificate of Class (+supplement)
: 2309061HM
CERTIFICATE OF CLASS
(INTERIM)
This Certificate is accompanied with a Supplement
to confirm that having been surveyed by Dromon Bureau of Shipping1 Surveyor at VLADIVOSTOK,
RUSSIA
on 09/10/2023 has been found in compliance with the Society’s Rules for the Classification and
Construction of sea-going Ships.
The aforementioned ship has been assigned the following Class notations
Machinery MC
Period of Class running from 10/10/2023 Date of last Bottom Survey 23/09/2023
The Class is valid until 09/03/2024 Date of last propeller shaft survey 23/09/2023
subject to continuous compliance with the requirements of Dromon Bureau of Shipping Rules for the Classification
and Construction of sea-going Ships.
1
Dromon Bureau of Shipping endeavours to ensure that all its service function with every possible attention to accuracy. Nevertheless, Dromon Bureau of Shipping
Limited cannot be held responsible for any mistake, error or omission in any report or Certificate issued by its Surveyors. The same applies to the Register Book
issued, its appendices and to every relative publication. Similarly, Dromon Bureau of Shipping Limited cannot be held responsible for any negligence, omission, error
or judgement of their Surveyors, Representatives and Technical Advisors.
SUPPLEMENT TO CLASS
CERTIFICATE
THIS SUPPLEMENT SHALL BE PERMANENTLY ATTACHED
TO THE CLASS CERTIFICATE.
THE CLASS CERTIFICATE SHALL BE AVAILABLE ON BOARD THE SHIP AT ALL TIMES.
HULL
Tonnage particulars according to International Convention on Tonnage measurement of Ships, 1969:
Gross Tonnage 3580 Length (m) 84.81 Moulded Depth (m) 7.20
Net Tonnage 1323 Breadth (m) 16.20 Moulded draught (m) 4.95
10A1 The symbol denotes that this ship has been built under the
supervision of another Classification Society and has been assigned
DBS Class, with this main symbol of Class.
GENERAL CARGO WITH The symbol denotes that this ship is complying with the basic
CONTAINER requirements specified for the given type, as well as with the relevant
additional requirements, specified in the respective Parts and Rules
of Dromon BS.
MC The symbol denotes that the machinery has been classed by another
Classification Society and has been assigned DBS Class, with this
main symbol of Class
Anchor Equipment:
Anchor Chain Length (m) 357.50 Weight of each Anchor (kg) 2460
MACHINERY
Main Engine:
Number of Main Engine(s) TWO (2)
Manufacturer -- --
Model -- --
Type -- --
Power -- --
Diameter/Stroke (mm) -- --
Propeller:
BOTTOM SURVEYS
The last two inspections of the outside of the ship’s bottom took place on 20/11/2021 and 23/09/2023
V.STROKACH - RU03
DROMON BUREAU OF SHIPPING
1
Delete as appropriate