Professional Documents
Culture Documents
Liugong 9018f Stage V Eng
Liugong 9018f Stage V Eng
9018F
EXCAVATOR
1
9018F EXCAVATOR
1 2 3 4
With the new 9018F, we’ve created something different. An exceptionally performing compact machine
which gives operators everything they want – without compromise.
2
TOUGH FACTS
DESIGN IN ACTION
Take a walk around the new 9018F and you will see the difference.
It has big excavator performance – in smart, compact body.
ONE MACHINE –
MULTIPLE POSSIBILITIES
High flow auxiliary lines are fitted as standard
with an optional rotation circuit available. With an
additional counterweight, the machine can be
fitted with heavier work tools to match multiple
job site challenges. A range of specially
designed buckets can also be chosen
depending on task in hand.
NO SPACE? NO PROBLEM!
When space is tight, the neat compact design with short tail swing gets
you to work. Agile and ergonomic Boom Swing control allows the new
9018F working access to the smallest spaces with a 72-degree swing to
the left and 52-degrees to the right.
EASY TO TRANSPORT
Lightweight, compact design with retractable undercarriage makes this
machine simple to move from one place to another, no matter how narrow
the access. With excellent visibility and precision control, this machine
can get off the trailer and onto the site fast and safely every time.
4
PUTTING YOU IN CONTROL
Control is everything. Load sensing hydraulics deliver precise and
smooth operation for excellent grading performance. The electro-
proportional auxiliary line enables easy and accurate control of the
attachments. The new dozer blade geometry allows the bucket and
the blade to work in harmony to speedily sweep away materials.
AT YOUR SERVICE
For speed and simplicity, the engine covers, fuelling and maintenance
access points have all been designed to make daily checks and
maintenance pain free.
INTELLIGENT POWER
The fuel efficient, low noise and low emission Stage V certified Yanmar
3TNV80F-SSLY engine gives the operator the power to perform.
With perfectly matched hydraulics for greater efficiency, operators can
expect to reduce fuel consumption by up to 10% compared with the
industry average.
EASY DOES IT
Fully opening side covers give easy access to air filter, oil filter, fuel
prefilter, dipstick, hydraulic tank and oil fill cap, not to mention the
engine, main pump and radiator.
TOUGH JUDGES
Operators are tough judges. They know what they like and what they
don’t. We’ve talked, we’ve listened and we’ve delivered a no-nonsense
excavator that will do everything the operator wants and needs it to do.
Job done? Judge for yourself.
TOUGH EQUIPMENT
50,000 Excavators currently in the field.
Over 1/2 BILLION productive hours
worked.
5
9018F EXCAVATOR
JOBSITE UPTIME
AND SUPPORT
Compact size with big performance might convince you to buy your first new 9018F,
but it’s uptime and support and total cost of ownership which will keep you coming
back to buy more. Having confidence in the machine’s back up and support network
is a vital part of the purchasing decision. How do we measure up?
MOSCOW, RUSSIA
PORTSMOUTH,
UNITED KINGDOM WARSAW, POLAND
STALOWA WOLA, POLAND CHITA, RUSSIA
ALMERE, NETHERLANDS
JAKARTA, INDONESIA
REGIONAL SUBSIDIARIES
13 1,000+ 5 12 Over
9,500+ 20 300+ Regional 60 Years’
Regional R&D R&D
Employees Factories Dealers facilities parts experience
subsidiaries engineers depots
6
WHERE YOU NEED US MAINTENANCE AND
WHEN YOU NEED US SUPPORT PACKAGES
Reliability is built into our machines but all informed on service and maintenance work From genuine LiuGong parts, to full repair
machines have some planned downtime. and providing clear and accurate estimates, and maintenance contracts, LiuGong has
Our aim is to reduce even planned down invoices and communication. the flexibility to offer the level of support
time to the minimum by getting it right. These may be small things, but customer and response to suit your business and
Technician training and parts availability are feedback tells us that these basics really applications. Whatever level of support
also high on our agenda, as is keeping you matter – so we aim to get them right. you choose you can be confident that it is
backed up by LiuGong’s service promise.
Highly trained technicians 15,000+ Genuine LiuGong Multi-lingual service helpline Transparent estimates Clear communications through
utilizing the latest parts available within 24hrs and online support and invoicing electronic parts catalogue
diagnostic equipment from our European Parts
Distribution Center
7
9018F EXCAVATOR
TOTAL COST
OF OWNERSHIP
Easy to transport, simple to use and quick to maintain, the new 9018F appears to
have it all. But ultimately, the machines earning potential, its overall life cost and its
trade-in value really matter too.
When it comes to total cost of ownership
LiuGong has a strong story to tell.
a range of models, compared with some
manufacturers. In fact, we can deliver
RESIDUAL VALUE
selected machines in as little as 4 weeks. With the combination of LiuGong design
and manufacturing excellence, world class
PROFESSIONAL ADVICE The faster you can get a machine – the
components and comprehensive uptime
faster you can get working and earning.
We are committed to reducing your total support, our quality holds its value.
cost of ownership and increasing your Our aim is to get you on to the job site fast.
profits. As part of this, LiuGong’s experts
will provide targeted advice on everything, TICKET PRICE
from choosing the right machine for your
At LiuGong, our aim is to provide you
needs to maximizing its efficiency on site.
with real, measurable value by giving you
everything you need and nothing you
MACHINE AVAILABILITY don’t. We choose high quality, proven
Our machines deliver everything you need components and parts from world-
and nothing you don’t. They are expertly renowned brands and suppliers.
engineered NOT over engineered. As a These proven components, combined
result of having an extensive manufacturing with LiuGong design and manufacturing
operation right in the heart of Europe, we quality, result in a high quality, competitive
can offer significantly shorter lead times on machine that is totally fit for purpose.
8
IT ALL ADDS UP
With the new 9018F we’ve EASY TO TRANSPORT
risen to the challenge and +
given you everything you
need and nothing you don’t.
SIMPLE TO USE
+
It’s an excavator which can
handle any job, anywhere, QUICK TO MAINTAIN
backed up by LiuGong’s +
service promise and
designed to perform on the TOTAL COST
job site and on the balance OF OWNERSHIP
sheet. Add up the benefits
and you’ll see that the
new 9018F represents the CUSTOMER SATISFACTION
formula for success.
9
9018F EXCAVATOR
SPECIFICATIONS
Canopy 1,800 kg SWING SYSTEM ELECTRIC SYSTEM
Operating (3,968 lbs)
weight Description System Voltage 12 V
Cab 1,900 kg (4,189 lbs)
Planetary gear reduction driven by high Batteries 12 V
Operating weight includes coolant, lubricants, torque axial piston motor, with oil disk
full fuel tank, cab, standard Shoes, boom, arm, brake. Swing parking brake resets within five Alternator 12 V - 40 A
bucket and operator 75 kg (165 lbs). seconds after swing pilot controls return to 12 V - 1.4 kW
neutral Start motor
Bucket capacity 0.045 m³ (0.059 yd³ ) (24 V - 1.9 hp)
Yanmar EU Stage V, 3-cylinder straight four Engine oil 4.4 L (1.2 gal)
strokes, indirect injection. HYDRAULIC SYSTEM
Cooling system 3.3 L (0.9 gal)
EPA Tier 4F / EU Main pump
Emission rating Hydraulic reservoir 24 L (6.3 gal)
Stage V
Load-sensing
Type Hydraulic system total -
Engine manufacturer Yanmar variable pump
10 LiuGong standard and optional equipment may vary from region to region. Please consult your LiuGong dealer for information specific to your area.
DIMENSIONS
Distance Between The Working Device And Swing Center--Right 419 mm (1'4")
Distance Between The Working Device And Swing Center--Left 558 mm (1'10")
Cylinder, piping and pin included. Boom cylinder pin excluded. Cylinder, linkage and pin included.
LiuGong standard and optional equipment may vary from region to region. Please consult your LiuGong dealer for information specific to your area. 11
9018F EXCAVATOR
WORKING RANGE
230 mm (9') Metal 1,900 kg (4,189 lb) 30.5 kPa (4.4 psi) 1,290 mm (4'3")
Canopy
Rubber 1,800 kg (3,968 lb) 28.9 kPa (4.2 psi) 1,290 mm (4'3")
12 LiuGong standard and optional equipment may vary from region to region. Please consult your LiuGong dealer for information specific to your area.
Lifting capacity at the arm end without bucket. 1. Do not attempt to lift or hold any load that is 4. Lifting capacities are based on machine standing
For lifting capacity including bucket, weight of the greater than these rated values at their specified on level, firm and uniform ground.
bucket or the bucket with quick coupler must be load radius and height. Weight of all accessories 5. *Indicates the load is limited by hydraulic
deducted from the lifting capacities. must be deducted from the above lifting capacity rather than tipping capacity.
capacities.
Lifting capacities are based on the machine 6. Operator should be fully acquainted with the
standing on a firm, uniform supporting surface. 2. The rated loads are in compliance with ISO Operator’s and Maintenance Instructions before
10567 Hydraulic Excavator Lift Capacity Rating operating this machine and rules for the safe
Standard. They do not exceed 87% of hydraulic operation of equipment should be adhered to at
lifting capacity or 75% tipping load. all times.
Rating over-front (Cf) Rating over-side (Cs) 3. Ratings at bucket lift hook.
A (Blade Up)
1.5 kg - - 443 *360 348 269 264 204 238 183 3.2
1.0 kg - - 473 359 339 260 260 200 222 171 3.3
0.5 kg - - 452 340 329 251 255 195 218 166 3.4
Ground Level kg 686 496 439 328 321 243 251 191 222 169 3.3
-0.5 kg 686 496 435 324 317 240 249 189 238 181 3.1
-1.0 kg 691 500 436 325 318 240 - - 273 208 2.8
A (Blade Down)
1.5 kg - - *360 *360 *409 269 *410 204 *403 183 3.2
1.0 kg - - *611 359 *500 260 *435 200 *395 171 3.3
0.5 kg - - *787 340 *569 251 *453 195 *386 166 3.4
Ground Level kg *731 496 *813 328 *583 243 *446 191 *380 169 3.3
-0.5 kg 496 *752 324 *546 240 *405 189 *374 181 3.1
LiuGong standard and optional equipment may vary from region to region. Please consult your LiuGong dealer for information specific to your area. 13
9018F EXCAVATOR
Lifting capacity at the arm end without bucket. 1. Do not attempt to lift or hold any load that is 4. Lifting capacities are based on machine standing
For lifting capacity including bucket, weight of the greater than these rated values at their specified on level, firm and uniform ground.
bucket or the bucket with quick coupler must be load radius and height. Weight of all accessories 5. *Indicates the load is limited by hydraulic
deducted from the lifting capacities. must be deducted from the above lifting capacity rather than tipping capacity.
capacities.
Lifting capacities are based on the machine 6. Operator should be fully acquainted with the
standing on a firm, uniform supporting surface. 2. The rated loads are in compliance with ISO Operator’s and Maintenance Instructions before
10567 Hydraulic Excavator Lift Capacity Rating operating this machine and rules for the safe
Standard. They do not exceed 87% of hydraulic operation of equipment should be adhered to at
lifting capacity or 75% tipping load. all times.
3. Ratings at bucket lift hook.
Rating over-front (Cf) Rating over-side (Cs)
A (Blade Up)
5 ft 7 ft 8 ft 10 ft MAX REACH
B (ft)
Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs A (ft)
5 lbs - - 978 *795 768 594 583 450 525 404 10.5
3 lbs - - 1,044 792 748 574 574 442 490 377 10.9
2 lbs - - 998 751 726 554 563 430 481 366 11.0
Ground Level lbs 1,514 1,095 969 724 709 536 554 422 490 373 10.8
-2 lbs 1,514 1,095 960 715 700 530 550 417 525 400 10.2
-3 lbs 1,525 1,104 962 717 702 530 - - 603 459 9.2
A (Blade down)
5 ft 7 ft 8 ft 10 ft MAX REACH
B (ft)
Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs A (ft)
8 lbs - - - - *828 600 - - *874 572 8.5
5 lbs - - *795 *795 *903 594 *905 450 *890 404 10.5
3 lbs - - *1,349 792 *1,104 574 *960 442 *872 377 10.9
2 lbs - - *1,737 751 *1,256 554 *1,000 430 *852 366 11.0
Ground Level lbs *1,614 1,095 *1,795 724 *1,287 536 *985 422 *839 373 10.8
-2 lbs 1,095 *1,660 715 *1,205 530 *894 417 *826 400 10.2
14 LiuGong standard and optional equipment may vary from region to region. Please consult your LiuGong dealer for information specific to your area.
STANDARD EQUIPMENT
ENGINE SYSTEM HYDRAULIC SYSTEM DIGGING EQUIPMENT
• Dry type air cleaner • Pilot accumulator • Boom 1,685 mm (5'6")
(inside and outside elements) • Hydraulic test port: main pump • Boom swing
• Manual mechanical accelerator • Blade cylinder guard • Arm 1,070 mm (3'6")
• Engine manual preheating • Straight travel function • Counterweight 70 kg (154 lb)
• Fuel tank with drain plug
• Integrated shift lever with high speed and creep
• Fuel supply passage with electric fuel pump speed UNDERCARRIAGE
• Fuel shutoff valve • Dual way auxiliary lines, with multifunctional • Retractable undercarriage
• Fuel level sensor joystick control • Rubber shoes 230 mm (9")
• Fuel refilling and fuel level alert • Foldable dozer blade
• Fuel prefilter with water separation OPERATOR STATION
• Fuel filter • Enclosed cabin with TOPS standard
• Radiator group with drain plug (ISO 12117) & ROPS (ISO 3471)
• Coolant-level indicator (ground level) • General seat with 2' red retractable seat belt
• Cold start assembly (-15°C) • Joysticks with button control
• AM/FM Radio with MP3 audio jack, only for
ELECTRICAL SYSTEM cabin
• Display: hour meter, tachometer and timer etc. • Washable floor mat
• Indicator: engine oil pressure, low fuel level, air • Opening front windshield
filter plugging, overheating, high fuel level, etc. • Manual heater (for enclosed cab)
• Horn
• Defroster
• Pilot cut-off switch
• Fresh air ventilation
• Battery disconnect switch
• 12V battery
• Data diagnosis port
• Auto diagnosis system
• Maintenance free battery
• Working lights: 1 on boom, 1 on cabin
• Fuse box
OPTIONAL EQUIPMENT
ENGINE SYSTEM HYDRAULIC SYSTEM DIGGING EQUIPMENT
• Auto-idle function • Auto-shift travel speed • 1,210 mm (4') long arm
• Load holding valve on boom cylinder • Additional bolt-on counterweight, weight adds
ELECTRICAL • Load holding valve on arm cylinder 30 kg (66 lbs)
• Engine stop switch • Load holding valve on dozer blade cylinder
• Travel alarm (alarm during machine travel) UNDERCARRIAGE
• Quick coupler lines, high pressure, low flow
• Rotating beacon (top cab mounted,for • 230 mm (9") steel track
• Dual way auxiliary lines; attachment rotation
caution,switch in cab) lines, with proportional joystick control, with • Rubber crawler pads
• Automatic idle system flow adjustment function • Long dozer blade (to reach the bucket)
• Working light, one on left side of canopy • Manual switch on auxiliary circuit: one way /
• Working light, one on right side of cabin or dual way
canopy • Travel pedal
• Working lights, on cab,front 4 and rear 2
• Seat belt connect with warning beacon, along CAB
with mechanical suspension seat,cabin • Canopy
• GPS • Removable front cab guard (only for cabin)
• Lower-front guard screen (only for cabin)
• Mechanical suspension seat, 2-inch retractable
belt
• Fire extinguisher
• Rear view mirror
15
TOUGH WORLD. TOUGH EQUIPMENT.
LG-PB-9018F-Stage V-16-12052020-ENG
The LiuGong series of logos herein, including but not limited to word marks, device marks, letter of alphabet marks and combination marks, as the
registered trademarks of Guangxi LiuGong Group Co., Ltd. are used by Guangxi LiuGong Machinery Co., Ltd. with legal permission, and shall not be used
without permission. Specifications and designs are subject to change without notice. Illustrations and pictures may include optional equipment and may
not include all standard equipment. Equipment and options varies by regional availability.