Professional Documents
Culture Documents
Retrofit Rear Lights BMW F30 - F31 - F80 LCI - BMW 3-Series and 4-Series Forum (F30 - F32) - F30POST
Retrofit Rear Lights BMW F30 - F31 - F80 LCI - BMW 3-Series and 4-Series Forum (F30 - F32) - F30POST
Page
1 2 3 4 5 ... Last
Here is a complete TUTO to mount new full LED taillights for BMW F30 /M3F80
For BMW F31 is the same, there is just the exterior lights that are different
[BUY]
Here are the reference pictures and pieces to buy
Outside left side taillights (63217369117)
Right side outside rear lights (63217369118)
Left inner taillights (63217369119)
Inside right rear lights (63217369120)
Cache left gutter (51497410819)
Cache right channel (51497410820)
[REMOVAL]
Removing hinge filling:
Left light:
Now he'll have to take that leave 2 son of internal fires left and right side to the rear
case REM located next to the battery
son connect the blue / red location 1 to REM (A174)prise(A174*12B) black / white
location No. 17
Photo of the socket located on the rear casing
Here the change to the interior lights left and right with the new outlet box
(61136984758)
2 connectors that will connect to the rear module, the other 8 are the original ones that
must be removed from the old black jack (4-pin) to the new green connector (6 pin
with 1 not used)
Left light:
connector and cable add
son blue / red slot No. 1 to the REM box (A174) taken (A174 * 12B) black / white
location No. 17
connector has moved from the original black jack (4-pin) to the new green jack (6-pin)
black / purple to No. 6
Brown to No. 3
Yellow / black to No. 4
Green / yellow to No. 5
Right light:
connector and cable add
son purple / gray location # 1 to the REM box (A174) taken (A174 * 14B) black / gray
location No. 12
connector has moved from the original black jack (4-pin) to the new green jack (6-pin)
Green / red to No. 5
Brown to No. 3
Yellow / purple to No. 4
Black / blue to No. 6
[CODING]
The coding of new fires is not required, since there is no error on the idrive but against
there will flicker flashing at each startup
If like me you do not want flickering lights here is the mod has to do with the E-sys
software
Flashing Rear:
Final result
There is also the possibility of adding the option as if the LCI rear lights were original
just add to the HO-wort (HELC) file and REM code
On the other hand, the 2 blue and green wires of the original bmw wiring
(61122410220) are now connected to the A174 * 13B socket.
right side
blue wires location n ° 1 to the REM box (A174) socket (A174 * 13B) location n ° 5
left side
green wires location n ° 1 to the REM box (A174) socket (A174 * 13B) location n ° 13.
If After adding HELC and REM code it does not work check the following lines
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 =
13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 =
13.7V [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_FIXED_PWM =
fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 =
100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_FIXED_PWM =
fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 =
100% [Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V
[Default]
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM_01 > LceLampMapping1 3062 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V
[Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM =
fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1
= 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM =
fixed
REM_01 > LceLampMapping2 3063 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1
= 13.5V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 =
13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 =
13.7V [Default]
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM_01 > LceLampMapping2 3063 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
REM_01 > LceOutputChannels 3061 > BFD_L_CCM = ccm_blinker_l
REM_01 > LceOutputChannels 3061 > BFD_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_L_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BFD_R_CCM = ccm_blinker_r
REM_01 > LceOutputChannels 3061 > BFD_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BFD_R_UE_SPG_SCHUTZ = dimmed
REM_01 > LceOutputChannels 3061 > BL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_L_WARMUEBERWACHUNG = aktiv
[Default]
REM_01 > LceOutputChannels 3061 > FRA_H_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > FRA_H_R_WARMUEBERWACHUNG = aktiv
[Default]
REM_01 > LceOutputChannels 3061 > NSL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_L_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_CCM = NEW_ccm_nsl_r
REM_01 > LceOutputChannels 3061 > NSL_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > NSL_R_UE_SPG_SCHUTZ = aktiv [Default]
REM_01 > LceOutputChannels 3061 > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM_01 > LceOutputChannels 3061 > RFS_L_CCM = NEW_ccm_rfs_l
REM_01 > LceOutputChannels 3061 > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM_01 > LceOutputChannels 3061 > SL_2_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM_01 > LceOutputChannels 3061 > SL_2_R_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_L_IS_LED = aktiv
REM_01 > LceOutputChannels 3061 > SL_R_IS_LED = aktiv
QUOTE
QUOTE
Quote:
Thank you
QUOTE
QUOTE
Quote:
QUOTE
david51 02:53 AM 09-18-2015
For BMW F31 is the same, there is just the exterior lights that are different
QUOTE
QUOTE
Quote:
QUOTE
QUOTE
Quote:
Thank you
QUOTE
Awesome!!!
QUOTE
QUOTE
now if we can get the parts for under 1k Canadian this is a feasible upgrade.
QUOTE
QUOTE
Quote:
QUOTE
Does anyone know what's necessary to convert back to Pre LCI? I prefer those better...
call me weird :P
QUOTE
Hey guys. I ran a new wire from each inner lci taillight to the box by the battery. Which
slots do i put the wires in for the inner turn signals/ brake lights to work? The locations
in this guide are currently already used in my F80 for the slot numbers.
Everything else is working besides that. Thanks!
QUOTE
david51 11:49 PM 01-07-2016
Quote:
Hello
QUOTE
Quote:
Hello
Yep. Already had it done. Thanks anyways! Did your method use flashing or tapping
for the inner turn signals?
QUOTE
Quote:
QUOTE
QUOTE
QUOTE
Page
1 2 3 4 5 ... Last
Reply Back
All times are GMT -5. The time now is 04:44 PM.